No HDD Recovery area

Hello

Im not getting that error at the launch of the "no HDD Recovery area" software is not to delete the recovery partitions I didn't touch... I tried to restart and hold down the 0 key it did not work, I used f8 but toshiba recovery did not work, he asked me to choose a restore but nothing was on the list and when clicking then nothing happens.

PS: I can still see in the Device Manager, it is not removed and its healthy state on the recovery partition.
Help, please

Thank you
Elyas

Can you tell us first what model of phone you have?

The fact is that preinstalled with no data recovery software. I think you you don't l l remove anything, but if you got your laptop by using the wrong option.

Have you used the HARD drive recovery option in the past?
You created the recovery DVDs?

Tags: Toshiba

Similar Questions

  • Portege Z830 - "No. HDD Recovery Area" more

    Hello

    Today, I wanted to do recovery USB stick with Toshiba Recovery Media Creator. To this end, I bought 16 GB 3 / 10 MB/key Verbatim s.

    I tried several times without success. Whenever I tried a Toshiba Recovery Media Creator noticed the error: * 040E2D-00-00000000 error code *... or nothing happened. I put in another new 16 GB USB 3 / 10 MB/s and the same thing happened.

    After that, I tried the third USB I had - Corsair 32 GB USB 3.0. And it worked: I did successfully recovery USB key, but this key that I use for other things...

    Then I continued with 16 GB Verbatim key. After a few tests more Toshiba Recovery Media Creator noticed "* no HDD Recovery area" * and after that I could do nothing. ".

    * What should I do now? * I think I did not ' do anything bad, just tried data recovery in the key of 16 GB. The only thing I did is this button formats formatting (with disk management... because after all the computers of the trial has not yet identified key...).

    Thank you for your advice in advance.

    Tomaz

    Hello

    It is not easy to say what the problem is here. The fact is that recovery image is marked with specific markers that can be found in Toshiba Recovery Media Creator. When the creator find these markers application starts correctly and recovery media can be created.
    I can't tell what the problem is here.
    > After that, I tried the third USB I had - Corsair 32 GB USB 3.0. And it worked: I did successfully recovery USB key, but this key that I use for other things...
    This sentence confused me. You have successfully recovery USB key created or not?

    By the way: try to start the HARD drive recovery facility to see if the same message again.
    Please post comments.

  • Re: Toshiba Recovery Media Creator - no HDD Recovery area

    Hi friends, I bought a new Toshiba Kirabook PSU8SA-00V00U, a few months ago. I wanted to create emergency recovery disks, but whenever I start Toshiba Recovery Media Creator, it comes with a message that HARD drive recovery area undetected.

    Then I tried running the recovery environment by pressing 0 at the beginning upward.
    It comes with a blue screen saying that can not load from the recovery partition.

    I checked with Paragon Hard Disk Partition Manager software that the recovery drive is available.

    How do I make a recovery media or connect this HDD in system recovery so that Toshiba Recovery Media Creator detects the recovery disk and made recovery media. If in the future, if I want to reset the PC to factory settings, it will be even coming up with a blue screen saying that it can not load the recovery environment.

    Any help will be appreciated!

    Hello

    Fact is that the installation of image recovery or recovery media creation works if the machine has only factory settings. In other words, everything must be in original condition without any changes. With the changes I mean, original OS must be installed and the structure of the partitions of HARD drive should not be changed.

    If you try to change HARD drive partitions original structure the system in general, or Toshiba recovery media creator, will be confused and will not be able to find what we call markers which provide information on the exact location on the HARD disk where the recovery image is placed or registered.

    Did you do something that might be responsible for this situation?

  • Satellite L510 - no HDD Recovery area more

    I bought a new Satellite L510.

    When I used for the first time. I deleted the two partitions except the c partition, thinking that it was of no use. Now when I click on toshiba recovery media creator, I get a message that «no area HARD drive recovery» I tried to do factory default settings by pressing F8 key bu he restore the default factory isn't at all and I don't have recovery CD

    Can someone help me on this please

    Hello

    Unfortunately, the image disk hard recovery went. The solution in your case:

    1. order the recovery disk https://backupmedia.toshiba.eu/landing.aspx Note, it is not free
    2 a copy of Windows vista and install it. Then, download all the required drivers and install

    Welcome them

  • Satellite P500 PSPG8A - no HDD Recovery area

    Can open recovery media creator, but it is empty.
    The recovery of HARD drive in Device Manager is there and 1.46 g in recovery and said all healthy ideas...?

    Satellite P500 pspg8a-01u004

    Of course the Toshiba recovery partition is not available more and that's why Toshiba recovery disc creator software can not find essential files to create the recovery disks...

  • Problems with Toshiba HDD Recovery

    Hello

    A few days ago, I bought a new Toshiba Satellite notebook, everything was going well until I started to delete or disable the programs that have been added automatically with Windows 7 Home Premium 64 bit on the HARD drive,
    because for me, most of them is really unnecessary and everytime when I checked the Task Manager it had before any process of more than 80.
    If everything seemed great until I rebooted the computer, after that there wasn't one more chance to log in windows, I tried several times, but without effect, even I tried via safe mode.
    It seemed like they were reduced.
    So I decided I will upload I want to install the new Windows 7 different version on the HARD drive, without thinking that he might restart former.
    and the problem started here because the hardware does not recognize the new version of Windows, I have all the drivers, I tried to download and add them, but did not work.
    Even Device Manager does not properly because it does not show same me I have the graphics card ATI, network card...

    I know I reacted stupidly, but is there a possibility that I can reboot, reinstall the old primary windows again, because I didn't erase them or I na not format the HDD but I installed the new version on
    One older so that they are still in place on the HARD drive, but under another brand windows.old.
    I also have on the other HARD drive recovery partition, or it's just better to him distribute service where they can solve the problem.
    If you have any tips or advice please tell me!

    Thanks for your response

    AL

    Oh AL what are you doing man. I mean why do you all this?
    The first step, you must do it with the new device is to check the s manuals and pick up some info about your new product.

    In this manual is clearly described that original recovery image is saved on the HARD drive and very important, is to create recovery DVD that you can use in the case if the HDD recovery procedure will not longer work.

    So what you have now?
    -screwed to the top of operating system
    -Nothing in the hand who can help you with recovery of OS install

    Only thing you can try now is to start HARD drive recovery in the hope that everything will work OK.
    Here the instructions how to do this > http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

    If this does not work, you have a big problem.
    Anyway send comments and let's see what you can do as the next step.

  • Satellite L650-12 q - Toshiba HDD Recovery does not

    Toshiba Satellite L650-12 q
    Windows 7 64 bit

    I am looking to re - install Windows using the Toshiba HDD Recovery software on my hard drive to restore the computer to factory settings.
    I followed the procedure to do this in the System Recovery Options, but received the following message is displayed:

    "The recovery of the operating system is impossible!
    Not found the HDD Recovery folder on the second disc of the first hard drive. There is no valid disk HARD recovery environment on this computer. »

    More details:
    Before you do the above, I supported the system and the files and folders using AOMEI Backupper. I then made the mistake of the merger of C: D: and E: partitions, E: contained HDDR files.

    After having tried the recovery above and receive the above message, I reinstalled the file system I had saved on an external hard drive, which resulted in a copy of the drive C: and E: drive with HDDR files.
    Unfortunately, when I tried to recover the operating system, the same message appeared.

    Then I tried to use a system restore disc, I had created a few weeks ago, but concluded that, for some reason that CD is empty.

    The good news is that the computer still works - slowly - and HDDR files seem to be still there, but for some reason, inaccessible.

    What are my options? I want to go back to initial factory settings so that I can go back and re-install the programs and files that I want to. (I backed up all my files and have records of installation for programs).

    If the worst comes to the worst and I have to buy a Windows 7 disc (if that's even possible - I don't want Windows 8), it would be possible to install on this computer and it would give me a clean install, without any of the garbage which is currently cluttering up my computer?

    Thank you for reading, and I would be grateful for any advice you can offer.

    In your case, the situation is clear: HARD drive recovery facility does not work?
    If you want to have the laptop with the settings you have an option only: for recovery image installation you must use the installation of recovery disc.

    If I understand right you don t, entitled?
    But you can order it on https://backupmedia.toshiba.eu/landing.aspx

    If you have any other questions do not hesitate to ask.

  • Satellite L755 - how to return to Windows 7 using the HDD Recovery folder

    Hello
    are how you today

    I own a toshiba Satellite L755.
    I have recently upgraded to windows 7 to windows 8, and now I do not have windows 8. I want to go back to windows 7.

    Many people say that it is possible using the HDD Recovery folder that I have on my D drive and it s 13.5 GB.

    What I need is to know if its possible and if you can you explain to me how its done.

    I searched the Web for an answer for tha last 4 hours and I thank you

    > Many people say that it is possible using the HDD Recovery folder that I have on my D drive and it s 13.5 GB

    A lot of people said you can use HARD drive recovery in order to put the system back to factory settings.
    This true s but this is possible ONLY if the system has not been modified.

    In case you have changed the system, you could go back to the factory settings using the recovery disk!
    Recovery disk may be created using the preinstalled tool called Toshiba Recovery Media Creator.

    Have you created this disc in the past!

  • Satellite L500-1XC HDD Recovery help

    Hi I have a Satellite L500-1XC of second hand, the former owner has installed Ubuntu (which I can't access because of password) as well as windows 7 and I try restore laptop to factory settings, but I just don't know how.

    I tried to turn it off and holding, then 0 and pressing the Start button. On the bottom of the home screen says HDD Recovery at the bottom left of the screen, but after that, he just the part of the selection for me to choose Ubuntu or Windows 7 and then just charge the laptop as usual.

    I tried to get the Recovery Media Creator, but I'm not. It seems that a lot of original Toshiba Utilities and supports have been removed.

    If anyone can help me fix this laptop, I'd be so grateful that I can not really afford to buy a Toshiba Recovery disk.

    Thank you

    > I'm trying to restore the laptop to factory settings, but I just don't know how
    I put t I think that HARD drive recovery would work because Linux has been installed on the HARD drive and I think that the partition table has been changed.
    This might be the reason why the HDD recovery isn't working.

    You can always see this Toshiba document that describes the whole HARD drive recovery procedure:
    http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm

    So now, drive HARD recovery does not work in this case, you can only use the installation disc.
    You can try to install Windows 7 using the Microsoft disk (Toshiba drivers are downloadable) or you order the disc of Arvato:
    http://backupmedia.Toshiba.EU/landing.aspx

  • Qosmio X 770 - would be partitions retractable affect HDD Recovery?

    There are three default partitions - 1.5 (active) GB, 450 GB (Windows 7) and 15 GB (HDD Recovery), all three primary type.

    I want to shrink the partition Windows 7 average ("C:", 450 GB) to make another partition primary or logical free space unallocated.

    What I want to know is - stop somehow Toshiba Recovery work? It will be able to understand that the recovery partition is now the fourth partition?

    Thank you! :)

    Hello

    I m not quite sure all this, but create a new partition could change the master boot record and in this case the HARD disk to recover partition was not found.

    I read in this forum that similar issue happened to some users after partitions of hard drive has been changed.

    I would recommend creating a disk recovery first. The recovery disk would help you to get the factory settings (also HARD to recover partition disk) if the partition by changing the process failed.

  • Do not have "Toshiba HDD Recovery" on Satellite U300-151 with Vista

    I have problem with Vista - it became too slow so I want to get back to factory settings.

    I went through the process described in [http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm] and then, instead of "Toshiba HDD recovery" as a last option-, I have 'Restore the full Windows operating system' which is the last one after 'comand prompt. When I click on that I get another box with warning by saying "when you reinstall windows OS reformats the hard drive and all data will be lost" and "If the preinstalled files are damaged you can use the product recovery disc (which I don't have)" and there are no other or any button except OK which I click and it just brings back me to the list "System Recovery Option"...

    I have Toshiba recovery disc creator no - it was not pre-installed when I bought computer - even if I had all the other software from toshiba.

    And I know that I can buy the recovery disk, but I don't think that pay 30 dollars for something that I should have had with the computer: and my computer is still under warranty.

    Delivered using the recovery media, you will be able to install Vista.
    Recovery image contains all of the drivers, tools and utilities, and after the installation of clean operating system, you should not install some additional software.

    Bye and good luck!

  • Tecra A10 - lost HDD Recovery for Vista

    Hello Toshiba,

    I bought a Tecra a month ago. Here are the details:
    Device name: Tecra A10 - 11L
    Unit number: PTSB0E-00C006AR

    For some reason I have to downgrade the machine in Windowx XP (using the CD-ROM supplied in the packaging recovery). I do not use Vista.
    Now I need to go back to the factory installed Vista Business.
    I didn't create a Vista recovery CD before downgrading to XP.

    I think I lost recovery disk for Vista.

    Then I found the site to order: https://backupmedia.toshiba.eu/serial.aspx

    1. I'm not sure I'll order the recovery Vista or XP Media?, it shows (price (including VAT): EUR 29.33)
    What recovery media that I will get?
    a. VISTA Business recovery
    b. recovery XP Media? (that I have)

    2 is there a hidden partition that I can use it to retrieve the vista?

    Can someone help/guide me?

    Sincerely,

    Andrew

    You are right. After installing Windows XP edition family the HDD recovery went and it cannot be used to install more factory settings. There is no hidden partition and you can't do anything.
    I really don't understand why you ignored Toshiba reminder on creating recovery DVDs.

    In any case, I think that you will get Vista 32 Bit SP1 Business (EN) because with this OS is delivered and preinstalled Tecra.

  • Need TOSHIBA Recovery Wizard, but have simply on TOSHIBA HDD Recovery Tool

    Hello world!

    I bought Windows 7 Home Premium OEM SP - 1 preinstaled in Turkey with model Sattelit L675-10z. Corsica, is in Turkish,

    And as I am not Turkish I wanted to find a way to use it in Russian. Toshiba supports service in Turkey told me that they cannot help me with this, so I have instoled program Vistalizator with the Russian language.

    It has been activated Windows without problem and just "authenticity windows 7" were not working. But I had the opportunity to download all the files to update windows without notifications.

    After 6 months of work, my child is delited some .dll files that I understood and also he deleted all the windows recovery points to sistem windows recovery.

    And when I tried to use toshiba HARD drive recovery, I was surprised. Before I got the toshiba laptop with windows 7 (also satelit L series) and it was easy to recover, but http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm I'm shoked. When I try to push button 8 in the bios I have not any TOSHIBA Recovery Wizard... .i have just TOSHIBA HDD Recovery Tool the same situation with button 'Zero' in the BIOS.

    Toshiba Recovery tool do not give me a chance to recover windows fair he also wants to erase all my files in all drives.

    I have also done with Toshiba Recovery Media creator usb charger and you have find it also gives me opportunity just to clear all my files in all computers.

    but I also find there a file setenv.ini with the following parameters.
    [Commune]
    Packer = ImageX
    InstallCMD = \inst.cmd
    FactoryInstallCMD = \facinst.cmd
    PartitionSizeGB =-1
    MinPartitionSizeGB = 15
    DefaultGUILang = English
    NumLang = 1
    Hnum = R13026TE
    [Lang1]
    Lang = TRK
    OS = Windows Win 7
    ImageName = 11898XSP.swm
    ImageIndex = 2
    WinREIndex = 1
    FS = NTFS
    StartMedium = 1

    and 2 files with name boot.wim so I think I can install windows 7 without erasing all my records? and there is also possibility to choose the language?

    Or maybe I should ask toshiba company servise on help?

    Have no idea what to do. Do not want to pay for another license, do not want to lose all my files, and want to use lisansed BONE in my native language or in English.

    Or if that's not possible, I would like to get the Turkish version of windows.

    Thank you
    Natalya

    Hello Natalya

    First some facts for you. I hope that this will help you understand some important things.
    Computers notebooks are specific products of countries and every laptop on the Turkish market is actually for people who use Turk language. In other words, they will get operating system and keyboard for that language.

    Each book is available for some countries of preinstalled language and there is no way to activate a different language. If you live in Russia and use the Russian language you should get Windows7 on your language and install it on your laptop. All the necessary drivers tools and utilities can be downloaded from the Toshiba support page. Of course, to the clean OS install, you must pay for the license of Microsoft. The button down belongs to the original version (Turkish language).

    When you install the operating system using the recovery image of HARD drive you Turk language again and the problem is not solved for you. In my opinion you n t to use this image at all. You can't choose your Russian language and, in general, this recovery mage Turk is useless for you.

    My advice to you if you want to keep this notebook:
    -change the keyboard (Russian language) the nearest Toshiba service for help. they can order and exchange it for you
    -installation disk install Win7 using Microsoft original (Win7)
    -install all the necessary drivers, tools and utilities from Toshiba download page the link is on this forum page (support Top sites)

    Please read all this and let me know if you have any other questions.

  • HowTO: Toshiba HDD Recovery after the new installation of Windows 7

    If you install a new windows format or toshiba by a cd of windows you will not be able to see the Toshiba Hdd Recovery on F8 to restore the menu.

    Like this

    So if you have a recovery partition, you can make a recovery system to factory default. Follow these steps...

    1. format your USB key. Paste that file to a usb flash drive.

    2 - reboot the system and press F12 to start from usb...

    After these steps you can restore the system to factory default...

    Toshiba recovery steps

    Thanks for your interesting ad.
    I m very interested in how it works and will try to test it soon.

  • NB550D - can't find Toshiba HDD recovery software

    Hello

    Several days ago, I bought a Toshiba NB550D netbook. He had Windows Starter pre-installed, but I wanted to try Linux. I installed Linux and, of course, left the recovery partition. Now, I would return for Windows.

    I would like to restore the software preinstalled on the hard drive, but I can't find the disk recovery software HARD Toshiba which could install on a newly installed Windows and restore the system from the hard drive. Where can I find it?

    I have a whole score necessary for recovery, nothing moves or deleted.

    Enormously grateful for the help
    Toshiba NB550D user

    Hello

    Toshiba HDD recovery software can be launched via the advanced version preinstalled Windows boot menu. In other words, this feature works with OS preinstalled only.

    Now you have installed another OS (Linux) and this means that you can start t HARD drive recovery option more. HARD drive recovery partition is not enough to do.

    Have you created a bootable USB key using the recovery media creator before installing Linux? If so, you can use this stick now to restore the original settings. If you don t have that stick you can order recovery media here:
    https://backupmedia.Toshiba.EU/landing.aspx

Maybe you are looking for

  • NB200 - can I change the operating system?

    Hello. I have a Toshiba NB200 and Windows 7 starter. I would like to change the operating system, and he wanted to know who I can install in this mini portatil. Also if after changing the operating system, the warranty is lost. Thank you for all!

  • by selecting the tree control

    Hi is possible to select multiple items in a tree control but also elements with different 'point dashes '. I can only select one or more items with the same item Indent? Kind regards Thijs

  • Multiple SSID on AIR-SAP702I-E-K9 (700 Aironet Access Point)?

    Hello community I wonder if it is possible to simultaneously run multiple SSID (actually 3) on a single Cisco AIR-SAP702I-E-K9, which is a standalone AccessPoint (AP). Each SSID should be linked to a different VIRTUAL LAN. Or do I need another model

  • Interruptions vCenter SNMP

    This is my first post.It seems that vCenter may not have sent this trap:ESX.problem.vmsyslogd.Storage.FailureerrorVCESX.problem.vmsyslogd.Storage.Failure | Logging of storage has failed. Newspapers are more locally stored on this host.Since 5.0 Refer

  • PHP content migration to 5.5 DW

    I have a new customer if I can re - open their site before June 1.I have a zip file of the old site content to fill a new site of DW. The old site was created in PhP with behaviors apparent server-side. My client old webmaster is now in jail, and acc