No shortcuts have been created after the installation of XP mode

Similar Questions

• Fake MP3 files have been created after the HDV capture

  Hello

  Capture from Canon XH - A1 works very well.

  Only the created files have the extension *. MP3

  When you later change this extension to *.mpeg, it works correctly.

  Question:

  How to capture in *.mpeg directly? And not only AK fake mp3?

  Thanks in advance

  PR (Netherlands)

  I had the same problem with CS6.

  I found that, after the capture in MP3 format just rename the m2t file extension and the file worked perfectly with audio and video. It's a pain... but it works.

• I have windows xp after the installation of service pack 3 I can only start in safe mode

  I have windows XP after the installation of service pack 3 I can only start in safe mode?

  Hello

  ·         You get the error message?

  ·         What happens when you try to start in normal mode?

  Method 1

  Windows XP can in every start Safe Mode by default. Even if you select the option Start Windows normally, it always starts in Mode without failure. IOW, you can't get out of safe mode.

  This happens if the switch/SafeBoot is added to the Boot.ini file. / SafeBoot parameter forces a boot in safe mode by using the specified parameters. The available parameters are:

  (a) minimal (b) network (c) safeboot: minimal (alternateshell) For more information about the boot.ini switches, see visualization and correction of the settings of the boot on x 86 systems RESOLUTION (a) click Start, run and type MSCONFIG (b) click the Boot.ini tab (c) If you have a dual-boot system, select the entry that is appropriate under the [operating systems] (d) in section downstairs, Startup Options uncheck / hisFEBOOT (e) click OK (f) restart Windows The entry/SafeBoot are removed from the Boot.ini file.

  Method 2:

  If the above method is not the cause, it seems that Service Pack 3 is not installed correctly.

  Step 1: You try to run the system restore from safe mode that will repair return the computer to the point while it was working fine.

  How to restore Windows XP to a previous state

  Step 2:

  I suggest you follow the troubleshooting steps form the article and check if it helps.

   

  How to troubleshoot an installation fails on Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950718

  Note: System requirements to install Windows XP SP3

  Reference: Learn how to install Windows XP Service Pack 3 (SP3)

  Hope the helps of information.

• Does anyone know why the e-mails from a server have been removed after the upgrade to Windows 7 (Windows Live mail) to Windows Vista (Windows Mail)?

  Or can I can return to windows mail to collect emails?

  Thank you

  [Moved from comments]

  It is likely that he was not prepared to leave a copy on the server, so by default it deleted messages on the server after you download the WLM.  This is my point of view on what happened anyway.

  Old Windows Mail messages should still be there.  They were previously under c:\users\[username]\AppData\Local\Microsoft\Windows Mail under local folders (see www.oehelp.com/backup.aspx#wm).  I think the upgrade leaves a Windows.old directory and you can try to look into it.  What you want are eml files which are messages.  Alternatively, you can use my free ceml (www.oehelp.com/ceml/) to view them.

  But you will not be able to retrieve them from the server, if they have been deleted.

  Steve

• tables have been created in the sys account

  Hello
  I've created a few tables in the sys user in the oracle 11g database account. (Told me, if I am against the creation of anything under the sys account).
  Now when the developer (11.1.1.6.0), we call these tables (eg. SYS.tableA), the form will not compile. It is said sys.tableA identified must be reported.
  
  What Miss me? We cannot create a public synonym for these tables (not allowed by company policy)
  
  Thank you
  Laba

  Hello

  To see the paintings in other users, you must have administrative privileges. The owner gives privileges to other users with the GRANT command.
  But the most important is not that but what follows.

  Never, never, NEVER create any object in the SYS/SYSTEM schema.

  François

• Some Java applets do not work after the installation in silent mode, resolved in tilting head "enable Java content in the browser" - why?

  We have about 1 800 workstations with Windows 7 (32-bit and 64-bit) running different versions of JRE Java 6 update via update 7 51 32.  Most are on 6 45 update.  We would like to standardize on update of Java 7 51 (32-bit) and get everyone updated to this version for security reasons.

  For the last two weeks, we had trouble with our driver prior to installation.  What we are seeing, it of that our procedure successfully closed all open Internet Explorer Windows and processes related to Java, uninstall all older versions of JRE Java and says then successfully installed of the update of Java 7 51.  The Java Control Panel works.  We can even take Internet Explorer to check the Java Version or Java Tester - what Version of Java are you running? and confirm that the Java applets on these sites load (although the latter only works after adding the site to the list of site exceptions); However, when the testers try to access our system Kronos Workforce Central 6.3.10, used by this system Java applets do not load.

  We tried the following things, which none worked:

  • Empty the Internet Explorer browser cache and cookies.
  • Clear the local Java cache.
  • Restart the computer.
  • Reset Internet Explorer settings, including personal settings.

  Go to the Panel control Java, ranging in the Security tab, uncheck "enable Java in the browser content", the only thing that works based on apply, press OK in the pop-up window, checking the box "Enable Java in the browser content", press OK, press OK in the pop-up window and then restart Internet Explorer.  It is only after this point, all Java applets, including those used by Kronos Workforce Central 6.3.10, work.

  What I need to know, is how I can automate the reset procedure from the box "Activate Java content in the browser" after installation, or I'm something wrong or missing a step in automatic installation that is originally for this?

  We use Microsoft SCCM 2007 R3 to perform this upgrade, and everything is run on the client computer by using the SYSTEM account.  First of all, the "javaclean.ps1" PowerShell script is run, with part of the process of command line change of the strategy of running script PowerShell for Bypass.  This script handles the closure of Java-dependent applications and Java deals and uninstall older versions of Java.

  javaclean.ps1:

  #Find all Java products, excluding the automatic update that actually is uninstalled when the main installation is removed.

  write-host "If you are looking for all versions of Java installed" - ForegroundColor yellow

  [table] $javas = Get-WmiObject-query "select * from win32_Product where (name as" Java % ' or name like '% of Java (TM)' or "J2SE %") and <>the name «Java Auto Updater»»

  If ($javas.count - gt 0)

  {

  write-host "Java is already installed" - ForegroundColor yellow

  #Get all Java processes and kill them. If java is running and processes are not killed then this script will call a restart suddenly.

  [table] $processes = Get-Process-name "Java * ' #-erroraction silentlycontinue

  $processes += get-Process - name "iexplore" #-erroraction silentlycontinue

  $processes += get-Process - name "firefox" #-erroraction silentlycontinue

  $processes += get-Process - name 'chrome' #-erroraction silentlycontinue

  $processes += get-Process - name "jqs" #-erroraction silentlycontinue

  $processes += get-Process - Name "jusched" #-erroraction silentlycontinue

  $processes += get-Process - Name 'jp2launcher' #-erroraction silentlycontinue

  If ($processes. Count - gt 0)

  {

  foreach ($myprocess to $processes)

  {

  $myprocess.kill)

  }

  }

  #Loop through the Java products installed.

  {foreach ($java to $javas)

  write-host "Uninstall" $java.name - ForegroundColor yellow.

  $java. Uninstall()

  }

  }

  Once this script is complete, SCCM calls a script VBS "install.vbs" to perform the installation of Java JRE 7 day 51.

  install.vbs

  '* ********************************

  '*

  ' * Script: install JRE 7 routine

  '*

  ' * Date: 14/03/14

  ' * Author: [REDACTED]

  ' * Rev: 1.0

  ' * Notes:

  '*

  '* ********************************

  '--------------------------------

  ' / / / Common

  '--------------------------------

  Set objFSO = CreateObject ("Scripting.FileSystemObject")

  Set objWshShell = CreateObject ("WScript.Shell")

  «Get the system architecture»

  Protected colSys: Set colSys = GetObject("WinMGMTS://"). ExecQuery ("SELECT AddressWidth FROM Win32_Processor", 48)

  Dim objSys

  For each objSys in colSys

  If objSys.AddressWidth = 64 then bolIs64Bit = True

  Next

  'Get the operating system

  Dim colOS: Set colOS = GetObject("WinMGMTS://"). ExecQuery ("" Select * from Win32_OperatingSystem ", 48")

  Dim objOS

  For each COS in colOS

  If left (objOS.caption, 20) = 'Microsoft Windows 8' then

  bolIsWin8 = True

  WScript.Echo "win8.

  End If

  If left (objOS.caption, 22) = "Microsoft Windows 8.1" Then

  bolIsWin81 = True

  WScript.Echo "win81."

  End If

  Next

  ' Set 32-bit directory program files

  If bolIs64Bit = True Then

  strPFILES = "Program Files (x 86)".

  strSYSDIR = "SysWOW64".

  Else strPFILES = "Program Files."

  strSYSDIR = "System32".

  End If

  ' Set repertoire_windows

  strWIN = objWshShell.ExpandEnvironmentStrings("%windir%") "

  'Set the current directory ".

  strCurrentDir = objFSO.GetParentFolderName (Wscript.ScriptFullName)

  ' Set computer name

  strCompName = objWshShell.ExpandEnvironmentStrings("%computername%") "

  '--------------------------------

  ' / / / Main script

  '--------------------------------

  '--------------------------------

  ' / / / Installation using .msi & capture exit code

  '--------------------------------

  ' intExitCode = objWshShell.Run ("msiexec.exe i" "" & strCurrentDir & "\package.msi" "" & "TRANSFORMS =" "" & strCurrentDir & _)

  ""\transform.mst"" "ALLUSERS = 1 Reboot = ReallySuppress/SB»(, 8, True)"

  ' wscript.quit (intExitCode)

  ' * COMMANDS RUN HERE *.

  "Create the folder structure if it does not already exist

  strFullPath = 'c:\Windows\Sun\Java\Deployment' "

  "How many levels are there in the path?

  nLevel = 0

  strParentPath = strFullPath

  Do until strParentPath = «»

  strParentPath = objFSO.GetParentFolderName (strParentPath)

  nLevel = nLevel + 1

  Loop

  ILevel = 1 to nLevel

  "Path of directory to the iLevel level to understand

  strParentPath = strFullPath

  For j = 1 To nLevel - iLevel

  strParentPath = objFSO.GetParentFolderName (strParentPath)

  Next

  ' Is it exist directory? If not, create it.

  If objFSO.FolderExists (strParentPath) = False Then

  Set newFolder = objFSO.CreateFolder (strParentPath)

  End If

  Next

  "Kill process

  objWshShell.Run "taskkill /F /IM iexplore.exe", 8, True

  objWshShell.Run "taskkill /F /IM firefox.exe", 8, True

  objWshShell.Run "taskkill /F /IM chrome.exe", 8, True

  objWshShell.Run "taskkill /F /IM javaw.exe", 8, True

  objWshShell.Run "taskkill /F /IM java.exe", 8, True

  objWshShell.Run "taskkill /F /IM jqs.exe", 8, True

  objWshShell.Run "taskkill /F /IM jusched.exe", 8, True

  "Copy deployment files

  objFSO.CopyFile strCurrentDir & "\deployment.config", "c:\Windows\Sun\Java\Deployment\", True

  objFSO.CopyFile strCurrentDir & "\deployment.properties", "c:\Windows\Sun\Java\Deployment\", True

  "Disable UAC".

  ' If bolIsWin8 or bolIsWin81 = True Then

  "objWshShell.Run"reg.exe ADD HKLM/v PromptOnSecureDesktop t REG_DWORD 0 f d", 8, True"

  "objWshShell.Run"reg.exe ADD HKLM v EnableLUA /t REG_DWORD /d 0 f", 8, True"

  "objWshShell.Run"reg.exe ADD HKLM/v ConsentPromptBehaviorAdmin t REG_DWORD 0 f d", 8, True"

  "End If

  "Install application".

  intExitCode = objWshShell.Run ("msiexec.exe i" "" & strCurrentDir & "\jre1.7.0_51.msi" "IEXPLORER = 1 AUTOUPDATECHECK = 0 = 0 JU JAVAUPDATE = 0 WEB_JAVA = 1 ALLUSERS = 1 Reboot = ReallySuppress/qn", 8, True ")

  "Enable UAC".

  ' If bolIsWin8 or bolIsWin81 = True Then

  "objWshShell.Run"reg.exe ADD HKLM/v PromptOnSecureDesktop /t REG_DWORD /d 1 f", 8, True"

  "objWshShell.Run"reg.exe ADD HKLM EnableLUA /t REG_DWORD /d 1 f v", 8, True"

  "objWshShell.Run"reg.exe ADD HKLM v ConsentPromptBehaviorAdmin /t REG_DWORD /d 5 f", 8, True"

  "End If

  WScript.Quit (intExitCode)

  '--------------------------------

  ' / / / Installation via .exe on network

  '--------------------------------

  "objWshShell.Run" "" "& strCurrentDir &"\Setup.exe"" s - sms - f1 "" "& strCurrentDir & _"

  "" "\setup.iss" "-f2" "" & strWIN & "\Temp\Install-app.txt" "", 8, True

  "Need to turn off the security warning opening the file first.

  Set objEnv = objWshShell.Environment ("PROCESS")

  objEnv ("SEE_MASK_NOZONECHECKS") = 1

  ' intExitCode = objWshShell.Run ("" "& strCurrentDir &"\jre-7u45-windows-i586.exe"" /s /v "" / norestart "& _)

  ("" "TRANSFORMS =" "" & strCurrentDir & "\Tribe-jre7.mst" "", 8, True)

  ' WScript.Quit (intExitCode)

  ' * COMMANDS RUN HERE *.

  "Then turn it back on.

  objEnv.Remove ("SEE_MASK_NOZONECHECKS")

  '--------------------------------

  ' / / / Features

  '--------------------------------

  Help on this issue would be much appreciated!

  It turns out that it is actually a problem with Kronos Workforce Central.  We had the parameter 'site.java.plugin.CLSID.familyVersion' as an application set to "clsid:CAFEEFAC-0016-0000-FFFF-ABCDEFFEDCBA", which is the CLSID Java Java 6.  After update this value to "clsid:8AD9C840 - 044F-11 D 1-B3E9-00805F499D93" (the universal CLSID of Java), this problem does not occur when the automatic upgrade of Java.

  We also have good Java 6 and 7 in our environment and did during our implementation of Kronos, so I don't know why we used the Java 6 CLSID in the first place.

  Detective Conan!

• Message "no coredump target has been set" after the installation of updates

  * This can be removed. Level errors on my behalf.* *.

  I ran Update Manager on 5 hosts this weekend. The first 4 are all Cisco UCS B200 M2 servers, and after joining each host in the cluster and exit the Maintenance Mode, I received the message header error "no coredump targets has been configured. Host core dumps can be saved. "The 5th host is a Cisco UCS B200 M3 and do not welcome me with the same message. I'm not very versed in PowerCLI, but after a search through the community, I tried just a command - simple

  esxcli system coredump partition list
  
  

  And then I'm greeted by a message "a positional parameter is not found that accepts arguments 'coredump'." I'm sure it's something simple I'm doing wrong but fighting it a little bit now and would like to just a little help. Thanks in advance.

  We run ESXi 5.5, our blades are configured to boot from SAN.

  Hello

  ESXCLI controls are raced when you SSH into the host, not PowerCLI

  Please check this KB:

  VMware KB: Configuration of a partition of diagnosis coredump on a host ESXi 5.x

  1. validate that something appears in this list - list of partition esxcli system coredump

  2. set the partition coredump in:

  "game partition coredump of the esxcli system - partition ="mpx.vmhba2:C0:T0:L0:7"

  game score system esxcli - enable true coredump

  You can also try to use:

  esxcli system coredump partition set --enable true --smart

  This will automatically set a partition.

  I hope this helps.

• you have to reboot after the installation of the new Flash Player 10 version 10.0.32.18?

  Or it will install without reboot?

  No reboot needed.

  If you need additional information, specify

  • your operating system
  • your browser
  • your current version of the public Service

• HAV detection fails after the closure of XP Mode until I have hard restart the computer on Win 7 Pro 64.

  I am running Win 7 Pro 64 bit, and I have a number of programs that are not compatible I have to run to work.  I installed XP mode, and the XP mode is running everything is fine.  When I stopped the XP mode, however, I can't reopen the XP Mode without making a hard my computer stop, as the detection of HAV told me that my BIOS is not correctly configured (note, have not changed the BIOS settings, and I've been able to open at this point).  Soft reboots do not seem to solve this problem, so I find myself in front make full tap downs and resets in order to get my settings of the BIOS to read again.  Is this a known problem or there at - it another way, I'm supposed to close out of the XP Mode so that I can still restart it without having to go through all that?

  Windows Update has nothing to do with this problem, even if you have upgraded to Win7. Try posting here instead: http://social.answers.microsoft.com/Forums/en-US/w7performance/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Can I reorder the accounts once they have been created?

  I have created a number of accounts of e-mail, but unfortunately most important were created last. I would like to move this account to the top of the list, but I don't see any way to rearrange the display account once the accounts have been created.

  Is it possible to rearrange accounts once they have been created?

  Thank you

  Install this add on.

  https://addons.Mozilla.org/en-us/Thunderbird/addon/manually-sort-folders/?src=SS

• Re-installing Windows XP (OEM - purchased version of njewspaper ad without mentioning it was OEM only) after the installation of the pirate Win Xp (full version). Can I retrieve pirate settings to not reinstall aps (have about 100). __

  Hello
  I'm trying to reinstall Windows XP (OEM - purchased version advertises in newspapers not to mention it was OEM only) after the installation of the pirate Win Xp (full version). Can I retrieve pirate settings to not reinstall aps (have about 100).
  (I guess I have to change registry to eventually replace OEM version with pirate version - it still would make it impossible to activate the automatic updates). Or I can just reinstall registry then replace edition OEM version? (Would still allow the applications to be installed without the re - install?) (A major pain).

  Visit the Genuine Microsoft software and click on Validate Windows.  After that validation fails, look for the Get Genuine button and click on it to find out how to acquire a Kit of WGA. Carey Frisch

• I have a compaq presario cq60 with vista which was able to start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. What can I do?

  I have a compaq presario cq60 with vista. Could not start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. I took the hard drive and installed in my office. Windows Explorer displays the main and recovery partitions.

  The primary partition has the following folders (including hidden & system)

  The recovery partition has the following (including the language files more)

  Someone at - it ideas why my laptop does not work?

  Thank you

  Greg

  Hello

  You press F11 on startup with a HP Compaq to start the recovery process.

  For problems with the recovery process, you will need to contact HP.

  BIOS problems:

  There are messages for the HP Forums for posters with similar errors:

  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/notebook-HDD-problems-TEst-status-1-07-fail/TD-p/658902

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-dv8000-getting-1-07-fail-error/TD-p/883284

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-notebook-dv6000-1-07-fail/TD-p/1069457

  All the answers it point to a drive about to fail

  See you soon.

• I have two Toshiba laptops, and both died after the installation of Windows Vista SP2

  I have two Toshiba laptops, and both died after the installation of the Windows Vista SP2 (home edition).
  Now, it does not... even not start BIOS... Try to boot from the CD, no luck. When WVista SP2 installed and restarted, after a while, he came to the flashing message: 0xC0190036 1183/62494...

  I can't help that if it does not start even. I don't have a CD WVista. Both laptop came pre-installed. In addition, no rescue CD.

  Any help will be appreciated. I really need help.
  Thank you.

  Well, try this:

  1. If the power is off.
  2. Start the laptop and keep press F8
  3. then select restore.

  And? :)

• Cannot download the pogo games. I get this message "Installation aborted, installed all components have been removed through the Undo feature".

  Original title: can not download the pogo games

  When I tried to load a pogo game, I received this message, "installion abandoned, all the componests languages have been removed through the restore feature, does that mean?"

  Hello
   
  1. what browser do you use to download pogo games? In addition, indicate the version.

  2. you remember to make changes to your computer before the problem?

  3. what operating system is installed on your computer?

  If you use Internet Explorer to download and install the pogo games, I suggest the following steps and check.
   
  Step 1:
   
  I would say first of all, you can download and install the latest version of Flash Player and Java by visiting the following links below and check if the problem persists.
   
  http://get.Adobe.com/flashplayer/
  http://Windows.Microsoft.com/en-us/Windows7/install-Java-in-Internet-Explorer

  Step 2:
   
  Clear the data cache in Internet Explorer
   
  To determine whether a performance issue or an error message is caused by corruption in the temporary Internet files or other cached information that is used by Internet Explorer, you must clear cached data.
   
  To do this, follow these steps:
   
  a. open Internet Explorer.
  b. click Security and then click on delete browsing history.
  c. remove the historical area of navigation, click on delete.
  A progress bar is displayed to indicate that the browsing history is currently disabled. Once this process is complete, test Internet Explorer to verify that it works correctly.
   
  Step 3:
   
  I suggest to optimize Internet Explorer and check to see if the problem persists.
   
  For more information about optimizing Internet Explorer, you can visit the link below:
   
  How to optimize Internet Explorer
  http://support.Microsoft.com/default.aspx/KB/936213
   
  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Step 4:

  If the advice above does not help, I suggest you put your computer in a clean boot State and try to download and install games pogo.

  Note: Follow step 7 to restart the computer as usual.
   
  If the problem persists, I suggest you contact Pogo community for the best support.
  http://Games-Forum.Pogo.com/categories/list.page?jforum_token=42

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• All the data disappeared after the installation of updates! Help!

  Hoping someone can help with this
  Last night I installed updates KB961371, 973346 KB and KB 890830 for Vista Home Premium and they seemed to have been settled... my computer turns off fine. But when I started today and connected to my usual user, I got a pop-up message from the tool bar by saying "your user profile was not loaded correctly, you have been logged on with a temporary profile, cnanges do you will be lost when you log out." Check the log of the events for more information or contact your administrator." I then found that all my data was away from all my files (music, photos, Documents, analyses)... everything was gone. I then logged out of my user every day and in my admin to have a snoop around and all the data disappeared from there too. While in admin I also looked in the update section to see if the updates have not been installed correctly, but he said that they had been installed successfully.

  I then rebooted, as I thought that it might help, but everything remained the same.

  After the reboot, I clicked through 'my computer' and hard the news here on the disc wrote I have 89 GB of 147 GB free, which I think is consistent with the amount of data I have stored. This made me think that the data is always there somewhere, but I can't access it at all thanks to my user every day or my administrator.

  As far as I can see, all the programs that I installed myself (such as Skype, open office software for my printer hp) are all present, but some of the shortcuts are out of the office. Also, when opening, they "behave" as newly installed programs. for example: Open Office writer guide me through a license agreement and registration rather than simply open a new document, and also firefox behaved in a way similar "new". Also, on commissioning today (after the installation of update yesterday), the window "welcome center" popped up, as did a window asking to save the "synaptics pointing device.

  In short, the system "behaves like new", remembers none of my settings etc, but it is still a my programs installed and most of all, I can't access any of my data! I have a Toshiba Equium P200-178 (use vista Home premium service pack 1 32-bit), I use AVG anti virus (8.5) and Ad-aware software anti spyware. These are updated every day and I run scans on a regular basis (last analysis aware ad probably about a week ago) so I'm not sure it's associated virus.

  Ask yourself what is this "temporary profile" and how to return to my old and my data! Help, please! Thanks :)

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  Good luck with it.

  Mick Murphy - Microsoft partner