'Non HP ink cartridges' been warned again and again and again...

Similar Questions

• Ink cartridge Laserjet M1212nf MFP and I get error message "install black cartridge.

  I have installed and reinstalled the ink cartridge black for my Laserjet M1212nf MFP and I get error message "install the black print cartridge.  I pointed out quite in the restart including manual online, the fact to unplug printer, etc..

  Help, please.

  This error of "Install black cartridge" is usually caused by a piece of packaging material that remains on the cartridge. The document below should help you to solve the problem. If this does not work, try to do a hard reset. If neither works, let me know.

  Toner blinking or 'Install black print cartridge' Message is displayed on the control panel:
  http://goo.GL/Nlqpg

  To do a hard reset:
  1. make sure that the printer is turned on.
  2. pull on the power cord from the printer.
  3. pull out the power cord from the wall.
  4. wait for 30 seconds.
  5. plug in the printer and turn it on.

• Ink cartridge indicated as "expiration" and is obsolete

  OfficeJet Pro K550. I changed the ink cartridge and put in a brand new. The Toolbox shows that it is full of ink but a message appears "change magenta cartridge to expire." The cartridge is shown that 99 percent full, but the printer will not print. Is there something I can do to disable this control process? Thanks for any help.

  Hi Bryan,.

  I tried to reply to your other post, but he failed. Your printer is listed on the Web page which explains expiry of ink as being one that allows to "replace".

  http://www.HP.com/pageyield/en-019/articles/inkExpiration.html?cCode=us&JumpID=reg_R1002_USEN

  The instructions at the bottom of the page show that you can "continue printing without replacing the ink cartridge, by following the instructions on the printer, in the user manual or the timeout message in ink on the screen of the computer."

• Cannot print in black and white when the yellow ink cartridge is low on ink

  Someone please tell me that the guy I talked to customer service is a fool and there is a way to print black and white, once your color cartridge runs out of ink.

  If this isn't the case, it's the cheapest clamp, all the money that I've ever heard of.  Someone please tell me they did sink that low.

  Printers that have individual ink cartridges (separate magenta, yellow and cyan) must have all the colors, mounted so as to ensure that the printhead to dry out and is not damaged. Some printers who have integrated print heads (that just take the 2 black and tricolor cartridges) have the ability to print in what is known as a reserve mode. That is where we remove the empty cartridge and is able to print a test page to determine if the printer can operate in reserve mode until a replacement can be purchased. The reason for the cartridges to install, is that the printer uses ink for other purposes in addition to printing. It is also used to maintain the printer. Here is a link to learn more about this topic. He will also discuss the topic of the reserve mode as well.

• Black ink cartridge HP Photosmart C309 to print not

  All of a sudden my printer does not print any black.  I have cleaned the print head (by using tools of the printer), came out of the cartridge and shook to see if he has really ink in it (printer says that it is complete), and it spend it.  The printer has been used regularly - it's not dry.  I tried to print the "status report" and the only thing that prints is the ink supply photos.  The thick black cartridge shows nothing, as if the cartridge is empty.  Can anyone help?

  Hi all

  my HP Photosmart Premium C309a was partially by printing in black and white only, when black has failed. I thought that the startup ink level may have been wrong on the front panel, so I bought a new black ink cartridge. Same problem and so I found this forum. I did a clean cartridge and the black began to work again. It is certainly a matter of keep an eye, and not one I am happy to know. My printer is only 1 month.

• HP Photo Smart Printer 6520 will not be printed in the new HP ink cartridge black

  Help! I have followed all the steps recommended for manufacturing and nothing.

  I even put the ink cartridge in hot water and no black ink hit my white paper once.

  I have a serial number, but I can't locate the product number to see if the printer is under warranty.

  Diagnosis of quality shows an empty box for black ink.

  My printer was printing in black before change cartridge.

  Hi @lllloljiojio

  I suggest you call the HP support by phone no matter whether in or out of warranty you may need a replacement printer.

  The number of call HP is 1-800-474-6836 for the Canada and the United States, or you can Contact HP worldwide.

  What is going on, I would advise against using this cartridge now that it has been soaked in water.

  Please let me know via private message which is the result of your call with HP. How to send a private Message

• Defective 7520 black ink cartridge

  I just installed a new black ink cartridge in by 7520 and printing is very light to non-existent. It acts like its out of ink.

  In this document troubleshooting steps can help solve the black does not print on your Photosmart 7520.  Be sure to check the events on solution 6.  If this does not resolve the problem here, the document can help.

• Photosmart plus 209: problem with compatible ink cartridge after moving to France UNITED Arab Emirates

  I have a Photosmart B209 more and you just moved from the Arab Emirates UNITED to the France. In the style of France the 178 HP, designed for that printer ink cartridge is not available, and it seems that the cartridge HP 364 in France is the same size and adapts to the machine but wil lnot work. I get a message on the printer saying incompatible cartridge. I saw a post about this problem with instructions to contact HP and get a kind of rearmament of the country. I wasn't able to do that. Can someone help with this problem?

  You will need to Contact HP to ask a "regionalization Reset." Do not charge for this, it is covered under the warranty of the cartridge. You will need to have access to your computer and printer then on line with HP. You will also need to have a set of cartridges for the new region, once completed reset cartridges of region of origin no longer works.  Webpage of HP on the subject is here.

• HP Officejet 6700 main Premium: Blue ink cartridge does not work

  Hello, I have checked the ink cartridges levels three color and just installed a new black ink cartridge.  I did a test of color, which shows any blue.  I did all three levels of cleaning the cartridge heads.  The screen still shows that I have adequate levels of ink, but no blue out at all!  There was a drop of blue outside the cartridge, so it's not like it is clogged.  Thank you!

  Hey @ccardot ,

  I understand that you do not get any blue print!

  That's really all that you can do and really all I can do you! The print head is probably the issue.  Please contact HP phone Support and see what they can do to help.

  If you are in the Canada, U.S. dial 800-474-6836 or you can Contact HP worldwide.

  HP printers usually have a warranty of 1 year from the date of purchase, you can check the warranty using the following if you wish; guarantee cheque.

  I hope this helps. Have a great day and a wonderful new year!

• HP Deskjet 2050 ink cartridge won

  Gives printer have a little thing upside down to remove the foreign body now ink cartridge stuck error msg and sounds like cartridge bumping into the side of the printer... help?

  With a dropout of transport error, there are a few things you can try. This document should guide you through these steps. If this does not work, you will need to replace the printer. If you are still in warranty, HP can replace the printer without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.

  HP Technical Support call case form:
  http://goo.GL/w7Hgh

• replace the black ink cartridge, but I cannot print anything. Could not load the publication SmartWeb w/o say

  After replacing the black ink cartridge, I cannot print and the printer does not recognize my action. I had a printer who worked three days ago and now with the diagnoses, I wonder to load Smartweb print disc which I did not.

  Can I get a support phone number to get this problem resolved?

  Here's how to contact HP technical support: www.hp.com/go/totalcare (click on printers & monitors, there is a phone number on the resulting page).

• Printers HP 309 g - m: black ink does not print not and feel vaguely colors.

  HP 309 g - m question all-in-one printer: I replaced two of my color ink cartridges in my printer and now black ink does not print and vaguely printing colors. My ink level is all good (not even close to being out). HP printer cartridges. was working fine before. Help, please. Thank you.

  The here document has troubleshooting which can help solve the black does not print on your Photosmart c309.  Be sure to check the vents.  If the above does not resolve the problem, the message here can help.

• SELPHY CP910 ink cartridge is stuck and cannot be removed

  I have a Canon Selphy CP910.

  The ink cartridge is stuck in the printer and ejection not possible.

  How can I remove the ink cartridge.

  It is the second unit I've owned that has happened.  I replaced the unit with a new one, and it happened again.

  The removable cartridge does not eject.

  Any ideas?

  Hello.

  Please, try the following to see if we can solve your problem:

  1. turn off the printer.

  2. open the side of the printer to access the ink cartridge.

  3. push the cartridge in the printer in order to ensure that it is locked.

  4. turn the printer on and back again.

  Once this has been done, try to remove the cartridge from the camera.

  If the problem persists, get more help contact us.

• HP Office Jet Pro 8720: Problem set up and launch the new printer & ink cartridge installation

  Two questions:
  First... it takes a LONG time for the computer to open itself.
  Then, when he did initiate... I opened the section of ink cartridge
  to install the ink & transport of ink would not come to the Center.
  SO... I stopped the printer to start again... and now, the
  screen has a spinning wheel indicating "cartridges controls."
  It lasts for more than half an hour.
  HELP... This is a new printer & I can't open.
  Thank you kindly.

  Hi @paulallah,

  Thanks for joining the Forums of HP Support for a solution to your printer problem.

  I understand that you have a printer of HP all-in-one OfficeJet Pro 8720 which took a long time to initialize and is now stuck in a mode 'check' cartridges after the reboot it because transport would not move to the Center. I would like to help with that.

  I would start by doing a Reset of the power on the printer.

  

  If that fails to solve the problem, you might want to speak with HP Technical Support as there may be a hardware problem.

  You mentioned that you are using a Mac running OS X 10.5 Leopard or more. The HP all-in-one OfficeJet Pro 8720 printer is only compatible with Mac OS X 10.7 Lion or later.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• Photosmart C7280 all in one printer keeps giving me expired ink cartridge warning

  My Photosmart C7280 all in one printer Guard giving me expired ink cartridge warning.  The cartridge has expired, but I want to continue to use it as it still has ink.  Is it possible to turn off these warnings to be boring?  I can't print until I have to recognize them!

  @ CoolBreeze202 - I'm sorry that you are having this problem with the ink cartridges and the ink expiration error message.  You can try to clean the contacts on the cartridge and the contacts inside the machine to ensure that built up on the parts are not the source of the error message. Pages 163 and 164 of the user manual will show a manual cleanup process.

  I would also do a hard reset to the printer to try to clear the error message and return the printer to a known working state. No user settings are lost with a hard reset.  Here is a link that will show you how to do a hard reset on this machine.