NOR-auth sbRIO does not produce prompt does not

Similar Questions

• My acquisition of data NOR usb-6008, does not appear in labview after installing drivers

  My DAQ does not appear in my labview program after installing the drivers. I can't add it to my program or anything like that. I installed 3 different drivers and updates, and it's still not appearing in labview. Is there something I'm missing or need to do yet?

  Thank you

  It seems that you have a damaged file somewhere in your installation.  You will need to go into the control panel and select the option to repair the installation.  You will need to run the repair twice due to a known problem.  After that, you need to reinstall the NI_Daqmx 9.4.

  Jacob K

• Driver NOR-executable daqmx / does not start

  Hello, what is the name of the executable file OR-daqmx 9.6 and the standard path.  I'm afraid that my installation is incomplete.  There is no executable file in my... \NI-DAQ folder (which contains a file Readme 9.6), only in my file \MAX for version 5.3.

  Thank you

  I don't know exactly where to go the real drivers.  But if you think that something is broken, I have reinstall the drivers or perform a repair installation.

• NOR-DAQmx: nicrtsiu.dll not an Image Windows validates when you use DAQmx features

  Hi all...

  I had the problem using nor-daqmx in Labview...

  When not to use Ni-DAQmx, I have not had any problems using it

  So, try to use one of the NI Daqmx works.

  She appeared a message

  "The application or DLL C:\WINDOWS\system32\nicrtsiu.dll is not a valid Windows image

  "Please check this against your installation diskette."

  Here are versions of the programs that I use.

  -Win XP Pro 2002 SP3

  - NI Labview 7.1

  -Driver OR DAQmx 8.5.0f3

  - NO Max 4.2

  I am baffled by this error

  Please advise kindly.

  Thank you

  Clement

  Hello..

  I have the same problem, as your problem.

  If you solved your problem, I want to know your opinion.

  Please, I beg you. Send me your email address.

  My email address is "[email protected]".

  Nice day.

• NOR-MAX recorded do not channel setting correctly

  I'm developing a system using Modules of field Point. I use 7 LabVIEW and NOR-MAX 3.0 to create commands and attributes for the FP-PG-522 module.

  To create an attribute of channel using NOR-MAX 3.0, I selects the FP-PG-522 module in the section of remote systems, select the desired channel, select the string attribute, then select Create point.

  A new item now appears in the data area. When I select this element, there is a description in the section 'Channels used on this point', which describes the attribute. For example, I chose the market time attribute. For this article, it says "this element represents the 'On Time' of the channels selected attribute. This attribute can be set to any integer between
  1 to 65535. "

  Then, I hit the SAVE button, which shows how to save the IAK file locally, so to save it on the module of ps2000.

  If I close OR-MAX 3 and restart, when I select the same new element in the data area, the attribute has changed. It doesn't seem to be any pattern, but I had such combinations as the "control" attributes, instead of the attribute "Generate impulses", etc..

  Then I have to delete all these channels and start again, however, data are still once, not saved correctly.

  Someone else knows this and knows a way around it?

  Chris,

  This problem has been identified and the fix will be included in the next version of FieldPoint software.

  I just wanted to let you all know.

• NOR-DAQmx subpalette is not available in my range of I/O of measure

  I have a USB-6009 I installed in my computer before installing LabView (big mistake).

  After I installed LabView 8.2 my camera would not work, he would be recognized by the computer, but whenever I try to read, I'd get an internal error message, so I re-installed the drive (DVD DAQmx 9.1.7) accompanying and now my subpalette function DAQmx disappeared.

  My LabView still has the available controls DAQmx subpalette, I can create tasks and everything, but I can't read, write, etc. Anyone know what could have gone wrong and how can I fix it?

  NOR-DAQmx 9.1.7 only supports LabVIEW 8.5, 8.6, 2009 and 2010.  You can check this KB for more information on which DAQmx versions are supported by each version of LabVIEW: NOR-DAQ and LabVIEW (for Windows) version compatibility.

  The latest version of the driver NOR-DAQmx LabVIEW 8.2 support was NEITHER-DAQmx 9.1.1.  You can download it from our website here.

• NOR-DAQ traditional vi not found in NOR-DAQmx

  Hello. We hope to control a detector via NI PCI-6533 (DIO-32HS). Our colleagues have implemented control programs in BT 7.1 to 7.3 of NOR-DAQ traditional. Now when we opened their programs on a PC installed with LV 8.6 and NOR-DAQmx 8.9, many vi was not located, including "DIO config.vi", "DIO wait.vi", "DIO clear.vi", "DIO read.vi", "Reset.vi Device", etc. We realized that they were supposed to come from vi.lib\daq\digital.llb and a few other .llb in the same folder. Apparently vi.llb\daq was installed by the traditional DAQ.

  We do not believe there is compatible with LV 8.6 traditional DAQ, which means that we need to replace those 'DIO *.vi' or 'Device reset.vi' with their counterparts DAQmx.  Could someone shed some light on how we should start working on that?

  Thank you very much.

  Xiaolan,

  Indeed, there is a traditional DAQ driver for LV 8.6. The installation can be found here.  I hope this helps.

• I try to communicate with the third instrument via the usb port but I don't know how to do same in nor-max, I'm not able to see devices usb port symbol and section of the Interface.

  Hello

  I am tring to connect my power supply that is not or via a USB cable, but I am not able to see my connection or the not-max usb symbol.

  first time I use it will you please guide me, and is there a driver I need to download for this? Here, I put one attachment regarding this.

  Thanks in advance.

  
  

• Oracle-Auth-token incoming does not match

  < 15 August 2012 14:27:36 SGT > < error > < oracle.portal.page > < BEA-000000 > < unexpected exception in servlet
  java.lang.IllegalStateException: Oracle-Auth-Token incoming does not match.
  at oracle.webdb.page.PageBuilder.processUMDRequest (unknown Source)
  at oracle.webdb.page.PageBuilder.process (unknown Source)
  at oracle.webdb.page.Main.doRequest (unknown Source)
  at oracle.webdb.page.ParallelServlet.doGet (unknown Source)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)
  at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:184)
  at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:526)
  at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:253)
  at oracle.webdb.portal.servlet.PortalServlet.doGet (unknown Source)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)
  at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
  at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:119)
  at java.security.AccessController.doPrivileged (Native Method)
  at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
  at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
  at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
  at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
  at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3730)
  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3696)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
  >
  
  Anyone know the cause of the error?

  Try the search function of My Oracle Support - this, you will have to note [url https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=1075472.1] 1075472.1, "XML Parsing Error: Syntax Error, line 1, column 1" and "Oracle-Auth-Token is not Match Error" when Portal accessing 11g.

  Thank you
  EJ

• Using the stored procedure: Source does not have a target executable

  I'm a guy from MS - SQL, so I'm fairly familiar with T - SQL syntax, but feels a heck of a time trying to take the code I wrote for SQL and turn this works with Oracle.
  
  in any case, I'm using Oracle SQL Developer, and I have a stored procedure that calls the Alter Table statement and adds a column. Just trying to get this one to work before moving on to the other that I have. I get the message that source does not have a target executable when I try to run this command.
  
  create or replace PROCEDURE rta_conv_addcolumn (rtatablename1 in varchar (20),)
  rtatablename2 in varchar (20),
  rtacolumnname in varchar (256),
  rtacolumninfo in varchar (256))
  AS
  DECLARE rtasql VARCHAR (4000);
  BEGIN
  IF EXISTS (SELECT * from user_tables WHERE table_name = rtatablename1)
  AND NOT EXISTS (SELECT * from user_tab_columns WHERE column_name = rtacolumnname)
  AND table_name = rtatablename1)
  AND NOT EXISTS (SELECT * from user_tab_columns WHERE column_name = rtacolumnname)
  AND table_name = rtatablename2)
  Then rtasql: = ' ALTER TABLE ["+ rtatablename2 +"] ADD "+ rtacolumnname +" "+ rtacolumninfo;
  Run (rtasql);
  END rta_conv_addcolumn;
  
  If I try to compile I get the following messages, which make no sense, since the syntax I use to declare the input variables seems to be good.
  
  Error (1.54): PLS-00103: encountered the symbol "(" quand attend une deles de valeurs suivantes:: =.), @ default % of the characters of the symbol ': = ' has been replaced by "(" pour continuer.)
  Error (2.29): PLS-00103: encountered the symbol "(" quand attend une deles de valeurs suivantes:: =.), @ default % of the characters of the symbol ': = ' has been replaced by "(" pour continuer.)
  Error (3.29): PLS-00103: encountered the symbol "(" quand attend une deles de valeurs suivantes:: =.), @ default % of the characters of the symbol ': = ' has been replaced by "(" pour continuer.)
  Error (4.29): PLS-00103: encountered the symbol "(" quand attend une deles de valeurs suivantes:: =.), @ default % of the characters of the symbol ': = ' has been replaced by "(" pour continuer.)
  Error (6.1): PLS-00103: encountered the symbol "DECLARE" when expecting one of the following: begin function package pragma procedure < an ID > subtype type use < a between double quote delimited identifiers of > form current cursor external language the symbol 'start' is substituted for 'SAID' continue.
  Error (15.5): PLS-00103: encountered the symbol "RTA_CONV_ADDCOLUMN" when expects it one of the following values: If

  Adds the column to the table specified in rtatablename1, if there is neither rtatablename1 nor rtatablename2.

  NOT TESTED

  create or replace PROCEDURE rta_conv_addcolumn(rtatablename1 in varchar,
  rtatablename2 in varchar,
  rtacolumnname in varchar,
  rtacolumninfo in varchar)
  AS
  rtasql VARCHAR(4000);
  count1 number;
  count2 number;
  count3 number;
  BEGIN
    SELECT count(*) into count1 FROM user_tables WHERE table_name = rtatablename1;
    SELECT count(*) into count2 FROM user_tab_columns WHERE column_name = rtacolumnname AND table_name = rtatablename1;
    SELECT count(*) into count3 FROM user_tab_columns WHERE column_name = rtacolumnname AND table_name = rtatablename2;
    IF count1>0 AND count2 = 0 AND count3=0 Then
      rtasql:= 'ALTER TABLE '|| rtatablename1 ||'ADD ' || rtacolumnname || ' ' || rtacolumninfo;
      Execute immediate rtasql;
    END IF;
  END rta_conv_addcolumn;
  /
  

  Max

  Published by: Massimo Ruocchio, December 12, 2009 02:15
  Missing AND

• PXI-6509 does not attach to the ribbon cable screw

  My threaded spacers on the connector of the PXI - 6509 100 i/o pins are not compatible with screwdowns that come with all the cables R1005050 Ribbon: either end threading is too large or the ribbon cable clamping thread is too small.  In any case, I can not connect it and wonder if it's vital for the current performance of ground or the shielding of the reasons?  I received my material in the calendar from June-August 2008, if it's important.

  Fluffums-

  Thanks for posting your question on the forums of NOR. It is not necessary to have your clamping of cables connected to the pins of the PXI-6509. The screwdowns are mainly here to make sure that your cable is connected to your device. Currently, I don't have my cable fixed in my PCI due to the fact that I'm constantly change hardware autour. I hope this helps.

• Attributes in NOR-Max not found in Labview

  I'm currently developing a LabView tool (2011) with a camera from Manta G504B Ethernet. It is NOR-compatible IMAQdx but in NOR-MAX attributes are not the same as those found in LabView. I would like as my tool developed to be able to change the exposure and acquire values and lifestyles. However, these attributes do not appear in LabView but appear in NOR-MAX. is it possible to get these attributes in LabView, since these values will change very frequently?

  My Manta firmware is 00.01.44.00

  NOR-IMAQ is 4.6.1

  E/s-OR-IMAQ is 2.5

  NOR-IMAQdx 3.8.1

  NOR-MAX 5.0.0f1

  Answer was found with the example OR grab and Attributes.vi base.

• install LabVIEW 2014 not to find the disk drivers

  I downloaded 3014 LabVkew and NIDevicesDrivers Aug13.  LabVIEW installed fine on my Windows 7 64-bit system, but it gives me an error that the drivers folder that I select does not contain the correct volume.  I tried device drivers folder NOR, Aug13 folder, the folder produced, none have been recognized as valid.

  Anyone know the trick to get the device drivers loaded?

  The last download is August 2014.

  http://www.NI.com/nisearch/app/main/p/bot/no/AP/tech/lang/en/PG/1/SN/catnav:, n8:4.9547.9548, ssnav:...

• Camera detected in MAX, but not found in Labview

  Hello

  I have a camera Thorlabs USB (DCC1645C). I installed the drivers and MAX detects the camera, but when I try to open the camera with NOR-IMAQdx, it does not appear. I also tried to open with NOR-IMAQ camera, but I could not.

  If I try with Vision Express/Vision acquisition, the camera appears, I am able to select and configure the principle of the camera, but when I execute the program there a mistake: 'not found room '.

  It would be great help.

  Thank you

  Hi AurelioSilva,

  In fact, NI-IMAQ driver is used only for materials. For the hardware part 3 (such as your USB camera), I recommend the use of iMAQdx. You can find the difference between the iMAQ and iMAQdx here: http://digital.ni.com/public.nsf/allkb/0564022DAFF513D2862579490057D42E

  Now, back to your problem. When you talk about LabVIEW 2013 (64-bit), I think that it is perhaps the issue. You see, most of the drivers like iMAQdx and iMAQ are supported by LabVIEW 2013 (32-bit) only. Don't worry, you can install and run 32-bit LabVIEW 2013 in your 64-bit computer OS cause I do this all the time with 3rd party cameras. In short, not all drivers of OR are supported on a 64-bit version of LabVIEW. You can read about it here: http://digital.ni.com/public.nsf/allkb/E9B4EA0143514DCB8625725D0050680A

  Warm greetings,

  Lennard.C

• NOR-DMM vs IVI - DMM - Soft Front Panel

  Hi all

  I've developed a test application that will subsequently use a PXI-4070 DMM (currently simulating it OR max).  I used the IVI DMM functions, but ran into a problem when I couldn't do a diode test (diode test is apparently not officially normalized according to by IVI yet).  So I've been using the functions OR DMM. Essentially, it's a pretty seamless transition, but there is one thing that I was not able to replicate with the NOR-DMM simulation I could do with the IVI - DMM.  When I used the IVI - DMM features and ran the VI, an open popup that enabled me to get into the simulated value I wanted the DMM to read.  I can't get this to work with functions OR DMM.  Is this possible?  If Yes please let me know how to activate it.  Thank you.

  GSinMN

  The advanced simulation exists only on the level of Class IIA (IviDmm) driver. Class IVI drivers implement the functions of simulation using pilots of the simulation. IVI Compliance Package (PIC) installs a driver simulation for each class IVI driver. Each pilot simulation of plugs for the pilot of the corresponding class and performs the simulation of flexible output data. The NOR-DMM is a specific driver that supports the DMM series NOR and therefore does not include the functionality of advanced simulation.