Not able to print from the phone to printer

Similar Questions

• not able to boot from the CD

  Hello

  I bougt garage a hp lodge 17, im not able to boot from the CD drive.

  It comes with windows 8, and honestly I do not like it.

  I want to start from the CD or for some reason im not able to do.

  It comes to the laptop.

  17.3 laptop HP Pavilion e079nr 17 inch

  https://www.Amazon.com/GP/product/B00GGGIWTI/ref=oh_details_o05_s00_i00?ie=UTF8&PSC=1

  I checked on the start menu and I just change

  CD

  hard drive.

  ...

  ...

  ...

  even its not not booting to the CD

  can you help me with this?

  Hello:

  Unfortunately, I do not know why the DVD player does not appear when you disable secure boot and turn on legacy mode.

• Not able to scan from the printer to my computer control panel using the HP Photosmart 5510

  Hello

  I recently bought the new HP Photosmart 5510 all in one - and I am not able to scan from my printer to my computer.

  I am however able to scan by launching the scan of the computer. I talked to HP customer earlier this evening and we ran printing + scan doctor and can't find any problems.

  I am running Windows 7-64 bit and that you have installed my wireless printer using the Installation CD supplied with the printer today.

  I could not finish troubleshooting with the technician that I talked to because I had to go to work. The person that I spoke with proposed possibly the full functionality of software downloaded from the hp.com site, which I'm happy to do, but I think that it is useless, because I have the CD of installation here. (The rep that I talked to was very nice, but I prefer not to have to uninstall and reinstall if it is not necessary)

  Because as I mentioned above, everything works perfectly and I am able to scan - but not directly from the printer itself.

  When I try to scan from my printer to my computer an error message appears on the control panel of the printer indicating that: there is no scan destination options of analysis chosen / no..

  However, I can't find anywhere with my HP software where I could add / make sure that the destinations were there. (As I could on my other printers. (IE. By the solution Center)

  This printer does not appear to be a solution center that I could find and the scanner installed with the CD icon doesn't give me any options regarding changing the settings of the parser

  I wonder:

  1. the Hp Photosmart 5510 does not have the capacity to scan from the printer control panel?

  2 OR the CD installation provided with my printer only has the base drivers as the agent of tech support suggested? Which means to scan from my printer I need to download drivers for your hp Web site?

  3. or is the problem because of something else entirely?

  Thanks for your help!

  HI Dublin,

  Follow the steps below to uninstall and reinstall the printer.

  1. open Control Panel

  2. click on uninstall a program

  3 uninstall the Photosmart 6510 in the list

  4 restart your computer

  5. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  6 download the drivers and full software functionality, and then reinstall the printer.

  Version 28.8

• 7B BSOD error, 8400 and not able to boot from the disc...

  Hey, I'm workin on a dimension 8400 friends, and his pc yesterday gave a bsod Unmountable_boot_volume for the first time. now, for some reason any, that he was not able to load up on disk xp on his pc, it would just freeze, so I took the hard drive and it brought to my Dimension 5000 and did a CHKDSK Fixboot on it, and it loads perfectly fine on my pc (although none of my drivers are installed (, as well so that I can use any hardware...)

  in any case, I brought back th hdd in its 8400, put it in and got a new BSOD, 7B, which is right after u see a glow of the XP loading screen.

  Now I tried to put in the xp disk, but its hard drives are not recognized by the pc and won't boot anything. I'm not really sure what to do...

  At my disposal, I have a SATS 3.5 external connector, I can do anything to fix it on usb should be...

  If the ideas please?

  
  

• Of SSL VPN is not able to access from the outside

  Configuration SSL VPN, unable to access from outside, when trying to access the browser site, it says "cannot display the Page.

  Area basic firewall is configured, there must be something that I'm missing, please see the attached config.

  Any help please

  Looks like you will have to allow SSL VPN from the WAN traffic to the free zone (ZP-WAN-to-self), so you need to update the political map (PMAP-JM-WAN) in particular the ACL (ACL-VPN-PROTOCOL), must allow access to port 443 of any source IP address:

  permit tcp any  eq 443

  .. .should do the trick. Cheers, Seb.

• Not able to save from the laptop to the office on a network.

  Hello

  I have 2 computers.

  The #1 computer is a Dell XPS 400 desktop that running Windows XP Media Center Edition Version 2002 with Service Pack 3 directly connected to a Linksys WRT54G wireless router with an Internet connection.

  The #2 computer in a Dell Studio 1737 laptop running Vista Home Premium with Service Pack 1, connect to the Internet and the desktop via the wireless router wirelessly.

  I have no problem, go out to the internet or to see the files and folders that I've shared desktop so that I can pull them up and change them to the laptop.

  The problem I have right now, it is that when I try to open, modify and then save a file on the desktop, I get an error message. Here are the steps that I tried to use a file TEST SAVE.txt that I created on the desktop in order to try to understand the problem.

  1. open the shortcut to my laptop in the folder that contains the TEST SAVE.txt. on my desk

  2. double-click on TEST SAVE.txt

  3. make a simple change in the document.

  4. choose Save in the file menu.

  Using this method, I get this error message.

  "Unable to create file name\TEST \\computer name\directory SAVE.txt.
  Make sure that the path and file name are correct.

  I also tried by repeating steps 1 to 3 above, but by choosing RECORD under in the file menu drop-down. When I do this it tells me that the file already exists, and I want to replace it. When I choose yes I get another error message saying the same thing as above.

  I checked to make sure that the files and folders on the desktop have been properly defined under attributes.

  No READ-ONLY checkbox.
  No hidden check box.

  Still no luck. Prolly something simple that I forgot, but any help in this would keep a few gray hairs to show.

  Thank you

  Hi Vlad70,

  Thanks for posting. Instead of using a shortcut to the file. Can you access the sharing, open it from there and see if you can save it?

  I hope this helps! Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Not able to broadcast from the NPR through Windows Media Player 12 site

  I have Win Med Player 12. I can open it and play the songs in my library. However, when I try to listen to streaming NPR online, I get a response that says "loadong media player then to initialize". This message remains there forever. Anyone know what is happening?

  Original title: win Med Player 12 streaming?

  Hello

  Welcome to the Microsoft community.

  I understand that you are facing problems with Windows Media player 12 with streaming feature.

  Please answer these questions:

  1. Are you able to play other stations?
  2. The problem is specific to NPR?

  I suggest the NPR site and directly try the streaming feature and check if it works.

  Let us, run the troubleshooter in the Windows Media Player settings and check if it helps. This utility checks the configuration settings and network for Windows Media Player to ensure that you can play the content you downloaded and saved on your computer, or content streaming over a network or the Internet.

  Open the troubleshooting Windows Media Player settings Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Keep us once perform you troubleshooting. Feel free to get back to us for assistance.

• vSphere ESXi ssh works, but not able to ping from the inside

  Hey man,

  I have problem with my ESXi 4.1 straing I just fresh installed on workstation 6.5 and assigned IP address. I am able to ping and ssh on my local network (another PC).

  But when I am trying to ping my local gateway of ESXi bash command line, I get the expiration time. Everything works including shared iSCSI and all but vMotion don't work. Is this firewall problem? I don't think that there inbuild firewall in ESXi.

  I am able to ping the local interface IP, but no gateway, see below.

  ~ # ping 192.168.1.1
  PING 192.168.1.1 (192.168.1.1): 56 data bytes

  -ping 192.168.1.1 - statistics
  3 packets transmitted, 0 packets received, 100% packet loss
  ~ # vmkping 192.168.1.1
  PING 192.168.1.1 (192.168.1.1): 56 data bytes

  -ping 192.168.1.1 - statistics
  3 packets transmitted, 0 packets received, 100% packet loss

  Greate that you are to the top and go.

• Not able to download from the internet

  When I try to download a file or a program (e.g. update of Java to open some of my programs) on the internet a window pop up appears saying:
  You have chosen to open jxpiinstall.exe which is a: binary file you want to save this file?
  If I click 'Save' and nothing happens.  It's very frustrating.

  In your original post, you mentioned an EXE file, now you say it's a JNLP file.  What you trying to do?  If you try to update Java, go to

  http://Java.com/en/ and download the update.  I don't think that a JNLP file is executable.

  Good luck.

• I can print Microsoft Word and Excel documents, but I am not able to print from the web. I get an error message that says: "Activation - Code 20' - error"Printer Not Activated".

  Activate printer F4580

  I run Microsoft Vista.  I have a printer HP F4580.  I can print Microsoft Word and Excel documents, but I am not able to print from the web.  I get an error message that says: "Activation - Code 20' - error"Printer Not Activated".  What should I do to correct this?

  Hello

  ·          What browser do you use to connect to the Internet?

  The error may occur if the wrong printer is set as default, the printer driver printer is missing, or if there are conflicts in Device Manager.

  Step 1: Make sure that the desired printer is set as the default printer:

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

• HP Officejet Pro 8625: I am able to print from windows, but not able to print from Word

  I installed an HP Officejet Pro 8625 wireless to my network.  I am able to scan from my computer and print from Chrome, but am not able to print from Mozzila or Word.  I replaced a HP Officejet 6500 with this device.  I can print from my mobile devices.   Any help would be welcome.

  Hello

  I found the answer to that by trawling for ever, it IS a HP PROBLEM, ARE YOU listening TO HP?

  the fact is that the printer driver will agree that a system administrator to print from some programs, Adobe, Office, Wordpad there more, but if you apply this fix, they will print

  go to the HEART control PANEL > USER ACCOUNTS > CHANGE USER ACCOUNT SETTINGS.

  Drag the slider to the bottom never notify, and then restart your computer.

  works on windows 7

  Indeed, you raise your account to an admin sys, but if HP has got their act together, they would sort this issue, because it is everywhere in their forums.

• not able to print the value of the url (aaa #bbb)

  Hello
  
  I am not able to print the < cfoutput > #url.xyz # < / cfoutput >
  
  Here, the url.xyz in the url value is aaa #bbb
  
  It is printing only aaa

  You should have url-encoded query from the beginning chain. Given that you don't have, Coldfusion ignored everything in the query string that comes after the character #. To fix this, replace the character # % 23. . In other words, .

  Another rule is that we should avoid the occurrence of the character # in a string. Thus, the correct value to cfoutput is "aaa ##bbb". To get and display code that is

  
  
  #url_xyz #.
  

• Not able to print the PDF with firefox 29,0 Preview pdf plugin. Why?

  Not able to print the PDF with firefox 29,0 Preview pdf plugin. Why?

  The 29.0.1 firefox solved my problem!

  Please check: Firefox-> Preferences-> tab-> applications (option) Portable document Format (PDF)-> Preview in firefox

  Good luck!

• I'm not able to get on the internet.  my phone is on cell phone and my historiqueest software

  I am not able to connect to the internet with my iphone

  You see error messages?

  Try to reboot/reset your phone.

• I am able to scan, but unfortunately not able to print on the printer DJ1515.

  Original title: Do not print to the printer.

  My DJ1515 printer after the success of the download, I was able to scan, but unfortunately not able to print. Need help how to solve this problem. Thank you

  You need to provide a little more information... and it is unclear what you mean by "after successful download" even though I think you mean that you believe that you have successfully installed the printer.

  Is your printer: http://h10025.www1.hp.com/ewfrf/wc/product?cc=lamerica_nsc_carib&dlc=en&lang=en&lc=en&product=5385208 (this model seems to be sold in Latin America and the Caribbean)?

  What version of Windows (XP Home, XP Pro, etc.) and service pack (none, 1, 2, 3) do you have?  Do right click my computer and select properties for info.

  Your printer is connected to your computer by USB, correct?

  When you installed the printer did you leave the printer NOT connected until you are prompted to connect by the installation software or did you first connect the printer to the computer and then install the software?

  What happens when you try to print? If you get an error message, please provide the full text without paraphrase.

  Please describe the status of the lights on the front of the printer (on/off/flashing).  Lights are on 1, 5 and 6 in the figure below:
  

  Click Start > printers and faxes
  Is there an icon for your printer?  If Yes, it looks like the following (except with the name of your printer instead of "hp Laser Jet 1300 PCL" 5th)?

  
  It's

  • Is there a circle with a check mark?
  • Is there a 0 in the second row?
  • The third line says 'ready '?

  What happens if you right cliquer click on this icon, select properties and then click on the button "Print Test Page"?

  What happens when you follow these steps:

  • Click Start > all programs > HP > HP Deskjet 1510 Series > Series HP Deskjet 1510 (note that the wording in your Start Menu may show instead of 1510-1515)
  • When the printer software opens, click on 'Print and scan' and then click on "maintain your printer.
  • When the printer Toolbox opens, click on 'Print the diagnostic information' in the tab 'device reports.

• I am able to scan from the scanner and printer, but can't seem to scan onto computor

  I am able to scan from the scanner and printer, but can't seem to scan on computor, what I have to do.

  Hello

  I suggest you to update the latest drivers for the scanner\printer and check if it helps:
  http://support.Microsoft.com/kb/283658

  Also check out this link:
  http://support.Microsoft.com/kb/323166

  It will be useful.