Of m125 to...?

Similar Questions

• Move the data from Palm Z22 for palm M125

  My Palm Z22 batteries do not hold a charge.  I recently bought a Palm M125, but have been unable to transfer data from the Z22, the M125.  My op system is Windows Vista Ultimate 32-bit Edition processor.  Is it possible to move the data?

  If the Z22 still works, the best way to transfer your data is for her beam to the M125.  At least, for the PIM of Palm of basic data (e.g., calendar, Contacts, memos, to-(tasks)).   On the Z22 in calendar, switch to the display of the day (not the order of the day).  In the menu, select the category of beam, choose the date range and select all from the drop-down list category.  Make sure that receiving IR is selected in the receiving device.  Align them face to face on one foot out and tap the beam.

  In Contacts, select the category in the upper right, then open the Menu and select the category of beam.  Same process for tasks and memos.

  Data and third-party applications might not let u their beam.   In addition, you will a newer device a lot older with an older operating system that may not work new apps.  So, after you transfer your PIM data, try beaming your third-party apps at a time to see if they run again.  The Z22 Launcher screen (at home), open the Menu, and then select the beam.  Highlight apps one at a time and try to beam at the M125.  My guess is that apps like Documents To Go might not even run, if they let u beam, because they were written for the newer versions of Palm OS than what works the M125.

  There is also an upgrade process where you can do this thru Palm Desktop when you switch devices.   But again because once you go towards the back to an older device, there are some compatibility issues with the applications, databases and files of the system, not to mention the questions according to what version you use Palm Desktop.

  Let us know if ensoupler works, or if you encounter any problems, in this case, we can go to the ugrade process.  Also, let us know what version of Palm Desktop you will synchronize with.

• MFP m125 m126

  Dear,

  Please note that after installing my HP printer LJ M125 M126 on Windows 7 (32-Bit); the printing process does not work normally. But the HP LJ M125126 Scan does not work with a pop up of error: The HP LJ M125126 Scan is not found.

  I tried to re - install (without success).

  I have disabled the firewall (in the case where no blocked port).

  And finally, I enabled all my features GPO (with also without success).

  Any help would be appreciated.

  Best regards from HP.

  Greetings @JMajally,

  Thank you access the Forums from HP Support for extra support! I see that you have problems with scanning. I'd love to help you.

  Please, try the procedure described in the document for your type of connection you are using:

  • Connection USB Scanner (Windows) error.
  • Scan network connection is lost (Windows).

  Let me know the type of number and the connection of the exact model if you have other questions.

  If this helps you to find a solution, please click on the button "accept as a Solution. If you wish, to say thank you for my effort to help, click on the 'Thumbs Up' to give me a Kudos. Please let me know the results. Good day!

• HP Laser Jet MFP M125 NW Pro: THE HP Previously 125126 scan is not found

  After forcing ugraded to Windows 10 I find now that I can't use the ease of the scan on the printer above.  When I get the HP doctor to check everything going through the different steps through Windows and then I am asked to do an analysis of test - when I select what I get a message saying THE Previously 125126 scan HP was not found.  If I skip this step and go to the next option, I find myself at the beginning.

  As a senior try my best stay on top of things I find it very very frustrating.

  Any help will be appreciated, thanks

  Hi @Peregrini,

  Thanks for joining the Forums of HP Support for a solution to your problem of scan.

  I have undersatnd that you have upgraded to Windows 10 and since then have not been able to scan with your M125nw of MFP HP LaserJet Pro. I would like to help.

  It's definitely a software problem. I would start by uninstalling any printer related software by following the steps described in this document of support - uninstalling the software of the printer (Windows).

  If you get prompted to restart the PC when uninstalling, restart the PC. If get you invited to restart, restart the PC once uninstallation is complete.

  Then I would download and install version 10 of Windows of the HP LaserJet Pro MFP M125/126 full series software and drivers. You can go to the Web page for download by clicking here.

  Once installation is complete, you should be able to start a new search. Here is a support document which can serve as a reference if necessary - scanning the computer HP Scan (Windows).

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• Card SD and Palm m125

  I bought a 2 GB SD card for my Palm m125.

  The Palm knows when I insert the card, but I can't do anything with the card.

  I can't rename it, and if I try and format the SD card, I get a message saying that the format has failed.

  If I try to copy the application on the SD card I get an error message that says: "an error has occurred all trying to copy the selected application."

  I know that the SD card is OK because I can format it on my computer and I can copy things on the SD card.

  I formatted the card on my computer and tried my Palm m125, but still had the same messages.

  Any ideas?

  The m125 cannot use this 2 GB card. See this thread stickied at the top of the Council:

  http://forums.hpwebos.com/T5/Palm-OS-WinMo-hardware/maximum-quot-tested-quot-expansion-card-sizes-for-Palm-devices/TD-p/68899

• Palm m125 sync for Windows 7-64

  Someone at - it could has a hotsync m125 Palm to Palm Desktop on a computer running Windows 7 64 bit?

  Follow the instructions in the next post and see if you can solve the problem.

  http://forums.hpwebos.com/T5/Windows-HotSync/64-bit-Palm-Desktop-drivers-are-here/m-p/337516#M58035

  For reference purposes, click the following link to the support page for your device on the kb.hpwebos.com Web page.

  http://KB.hpwebos.com/wps/portal/KB/common/article/47831_en.html#M125

  There are links on the page the user Troubleshooting Guide, how to, downloads, etc.

• HP LaserJet Pro MFP M125-M126: cannot set the default printer

  Hello

  We have HP LaserJet Pro M125 - M126 PCLmS network MFP all in one printer, as the installation of all users was a success and was working fine the day of installation, after a day all users face the question cannot set default pritner, cannot print, all users are faced with question at a time ,

  quick response is appreciated,

  Hi @darshan9 ,

  I see that you have problems affecting the default printer for users and you cannot print over the network.
  I'd love to help you.

  Do you mean the configuration of individual computers with the printer on the network users, or a computer with multiple users?

  You have administrative rights on the computer to make changes?

  What is the name and the product number of your printer? How can I find my model number or product number?

  Download and run the Print and Scan doctor. It will diagnose the problem and could solve it automatically. http://www.hp.com/go/tools > using HP diagnostic tools for printers under Windows HP.

  I suggest you to check if you have another account user or an administrative account.

  I also suggest to create a new user account and check if you are able to set the default printer.

  Create a user account. Create a user account.

  If you're still having problems, run the Fixit tool. Diagnose and automatically fix problems printing and printer.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  If there is anything else I can help you, let me know.

  Good day!
  Thank you.

• HP laserjet pro M125: hp laserjet m125 does support automatic duplex printing?

  The hp laserjet m125 does support automatic duplex printing? I can only understand how manually to do duplexing so far.

  I don't see anything in the manual mentions automatic duplex. So I think not, manual only.

• M125 synch to the Win7 problem

  Trying to USB sync my old m125 with my new Win7 Pro (32 bit) of the machine to work. Always worked fine on XP prior. By suggestion of Palm, Palm Desktop, I installed v. 6.2.2 and the installation went smoothly. HotSync seems to "work" normally, but the data on my m125 is not appearing in Palm Desktop.  User name is OK (I've never had a) m125 both HotSync Manager. Any suggestions would be greatly appreciated. Thanks in advance.

  Just found the answer by searching on the forum (I know, should have started there). For those with Win7 32 bit, just download the free app named PalmHotSynchSetup here: http://www.pimlicosoftware.com/ (bottom of page).  I have it made, selected the option to load legacy databases when invited, and then ran HotSync, and Alto! all the data on my handheld has appeared in Palm Desktop. At every 2 minutes. Great, now I can continue to use my old m125.

• M125 Software

  Now that HP bought Palm, it seems not to be a link for existing products such as the Palm m125.

  I have the original software, but at some point, there was an update.  Update or anyone accessing it?

  Thank you

  Hello richardsbj and welcome to the forums of Palm.

  You can access the archive page Palm, which includes manuals and downloads for the m125, here.

  Alan G

• Malfunction M125

  My Palm M125 sync more. The battery died in my last attempt to sync. How will I know if it's a software problem, a problem of handheld or the cradle dying? When I try to synchronize the message on the Palm is that the port is occupied by another application... but the USB port is NOT occupied. I did restart my computer, I checked the Hotsync Manager and only the Local USB is checked. Now what?

  Hello ConniePalm,

  The USB port in question here could be that of the m125.  If you have fresh batteries in the Palm, go a head and pull them and put them aside for about 10 minutes.  Then put back them in.  The m125 should react as if he had been the subject of a hard reset or as if you were using the Palm for the first out of the box.  Then repeat to HotSync.

  Alan G

• Sync for old m125 with new Vista OS PC?

  Confused! Have m125 I can get to sync - it shows at least the title on the screen of the PC - but when I go to work with the titles of my hand that held that there is nothing else than to whites in the data files of the office.  I loaded the new 62 program to get the sync to work using the docking station USB for PC - tried to Bluetooth, but could not get the recognition. Any help is appreciated.

  I nervously went into the Web of Pimlico site as suggested and to my surprise, the program loaded, I synced and everything was displayed. Thanks a lot for your help! I tried to send a thank you for the site of Pimlico, could not participate.

  http://www.PimlicoSoftware.com/palmhotsyncsetup.exe

  Message relates to: Palm m125

• Lazer Jet Pro MFP M125: printers

  I have 2 houses and bought the same printer wireless to each home so that I can't take one back.  How do install the second printer in the second place so that my laptop recognizes where to send the documents to print?

  Hello
  
  Thank you for using the HP Forums.

  You can simply install the 2nd printer.  However, you can rename it to "2nd personal printer" etc.

  1. go to your devices and printer > right click on your printer and go to properties of the printer

  2. on the "Général" tab, you can rename your printer.

  Hope that helps!

• HP LASerJET m125-126: waste irresistible impression

  It is impossible to cancel printing by using the red X key. I feel like the sorcerer's apprentice.  I can't stop the printing of unwanted copies. He lies still and until exhausted my supply of paper (or ink).

  Thank you for your advice.  Unfortunately, it has not worked for me, but it was probably due to my lack of timeliness. Finally, I stopped the process by cancelling the it on the comoputer himself. Although he succeeded, I deleted inadvertently queue as well!

  I appreciate your getting back to me.

• HP Laser Jet Pro M127fw MFP: HP Laser Jet Pro does not connect to applications so I can't scan

  All of a sudden my printer connects to the apps, so I can't scan. He linked it to the good apps until all of a sudden it stopped. I turned the printer power off and power on. Tried turning off the power applications, then on but it does not connect. I'm connected wireless. What can I do?

  Hello

  Make sure you have the latest firmware to keep the connection of web services:

  http://FTP.HP.com/pub/softlib/software13/printers/IPG/M125/LJM125_M126_M127_M128_Series_FW_Update-20160622_signed.dmg

  The last firmware datecode is 20160622, you can find the current firmware for your printer datecode by clicking Setup > reports > report of Configuration.

  The current datecode is listed in the printer information section.

  Kind regards

  Shlomi