OfficeJet 8500 activate the scan of the computer

Similar Questions

• OfficeJet 8500 a 910 scan does not work with my Macbook Pro Snow Leopard 10.6.8

  OfficeJet 8500 a 910 scan does not work with my Macbook Pro Snow Leopard 10.6.8.  I tried to reload of apple and HP.  My drivers and software are up to date.  I tried to scan from preview, Capture and print browser.

  It worked finally.

  Why doesn't HP have updated the drivers for a Macbook Pro 10.6.8 Snow Leopard?  I couldn't find one for 10.5 or 10.6 Leopard.  I tried everything I could find. I found a note on the edge of Disussion which suggested someone try a driver for another HP printer may be similar.  I found if I used the full program for Macbook Pro 10.6 Leopard I could scan.  The fax appeared to be installed via blue tooth.  I have not faxed anything, but it has been tested during the installation of the program.  Complete program of the HP I can't print.  I loaded via Apple an another whick of printer HP Officejet 8500 A910 allows me to print.  It is the only way that I could make use of my HP printer, scanner and fax.  Crazy, but I think it works and I can put some scans and, hopefully, fax to my Macbook Pro.  I appreciate the help.  Please encourage the HP programs and drivers for my Macbook Pro Snow Leopard 10.6.8.

• Want 5540: Impossible to activate the computer Scan: 5540 Envy, MacOS 10.12

  I tried to activate the Scan of the computer using the HP utility application settings. I received the message (in part), "HP software required for the Scan of the computer could not be located on this computer. Please download and install the latest software recommended HP... ».

  I then proceeded to the HP website and downloaded the appropriate firmware update. When running the executable, I received the message (in part) "device is in an error state and cannot be flashed because of this... »

  NB., we have been able to print using this printer, Wi - Fi, easily, since the purchase and installation on 28/08/16. No problem. In addition, using the * Apple * settings, by selecting 'Printers and Scanners' and going through the routine of "Scan", I can acquire a successful analysis (placed in "jpg" format in the 'Images' folder).

  I'm so concerned - very disappointed - as to why I can't activate and use the "Scan to computer" utility from HP. It does not work from the laptop computer side or from the printer control panel.

  Advice?

  Hello
  If you have HP scanning or a previous version of HP Easy Scan in the Applications folder or HP subfolder, delete it by moving it to the trash, and then empty the trash.
  
  Install the latest HP Easy Scan below, it will be installed in the Applications folder:
  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-easy-scan-1_7_0.pkg
  
  If you experience additional problems, ensure that the latest version of the software is installed by following HP Easy Start below:
  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/applications/HP_Easy_Start.app.zip
  
  Finally, make sure that your drivers are up-to-date by clicking the Apple icon, select about this Mac and then press on software update.
  Click on the Bank on the menu bar, click Reload Page, click all update if an update is available.
  
  Kind regards
  Shlomi

• HP Officejet Pro 6835: The computer won't send jobs to the printer

  My HP OfficeJet Pro 6835 is on and it says it is connected to my wireless network, but nothing will be printed on it.  I ran the HP Print doctor and he says that he has no problem.  I rebooted the computer and the printer and also deleted and redownloaded the drivers and the software of HP.  The HP Print doctor can get her pinter to print an internal test page, but no program will send a document to the printer (for example, word, excel, adobe).

  Hello

  Lets try an other ways so that you should at least be able to print.

  (if the printer is connected with USB)

  Click START > device and printer > add a printer > add a local printer >

  Select "Use existing Port" then Virtual USB from the drop-down menu, click on NEXT, in the production list, select HP / Hewlett-packard and in the right pane, select Deskjet 6980 and finish the wizard

  OR

  (if the printer is networked)

  Click START > device and printer > add a printer > add a local printer > choose "Create a new Port" > type in the printer IP address click NEXT, in the manufacture of the list, select HP / Hewlett-packard and in the right pane, select Deskjet 6980 and finish the wizard

  Now try printing from lotus and hopefully it should work.

• HP officejet 5745: print the computer screen

  I can't print the information on the web.  When I select the option print on the computer page or highlight a section of the Web page for printing, I go to the printing option (which shows the 5745 as the selected printer), select "Print", but nothing happens.

  Can you print from Notepad or other programs?  If this isn't the case, run the http://www.hp.com/go/tools diagnostics can help solve the problem.

  If you can print from other programs, please mention which browser you are trying to print from.

• HP Officejet 4630: queue the computer says printer is offline

  I have a laptop windows 7 (Levono) and a 'new' printer HPOJ4630 I received from HP, when my other original had to be replaced.

  I did the installation to download on my computer.  I did the install printer and HP Network Conf Page shows the printer is connected to the Internet, and the status of the network is ready.  However, when I send something to print it does not print and the computer queue wrote in offline mode.

  I need to use the printer without delay.

  Please HELP, your answer asap would be appreciated.

  Thank you for your answer, luckily I found a way to fix right after that I wrote the post.  Don't ask me how, but I managed to solve the problem.

  My printer is now working with my laptop perfectely.

• HP Officejet 8500 (A910): duplex scan

  HP Officejet 8500 (A910) / Windows7 32 bit

  Hello

  How can I scan double sided (duplex) - I can't find a way with 'HPScan.exe '.

  Thanks, Chris

  Hi Chris,

  What exact model?

  HP Officejet Pro 8500 (A910A) a does not provide duplex ADF duplex capacity

  Only the HP Officejet Pro 8500 has more or less Prime (A910g/n) is

• BSOD when I use Officejet J4680c on the computer stops

  Recently built a new computer, installed printer (drivers, software, hardware). Whenever I have stop computer (Win XP - Service Pack 3), I have the following BSOD message geet:

  A problem has been detected and windows has shut down to prevent damage to your computer. DRIVER_IRQL_NOT_LESS_OR_RQUAL if this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: make sure that a new hardware or software is installed correctly. If it is a new installation, ask your hardware manufacturer or software, the windows updates, you might need. If problems continue, disable or remove any newly installed hardware or software, options memory BIOS disable such as implementing caching or shading. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select advanced startup options, and then select Safe mode. Technical information: * STOP: 0x00000001 (0 x 00000002, 0 x 00000008, 0XB8429F20, 0XB8429F20) * usbccgp.sys - address B8429F20 base at B8429F20, DateStamp 00000000 * usbccgp.sys - address B8429F20 base at B8429F20, DateStamp 00000000 beginning of full physical memory dump of physical memory dump. For more assistance, contact your system administrator or technical support group.

  Any help or suggestions would be greatly appreciated.

  Yes, try to connect to the printer to a port 2.0 and let me know if it still BSOD.

• HP Officejet 8500, A909a series, scanning, fax or copy

  Whenever I scan, copy or fax documents usning the auto feed on top of the printer, the documents resulting from this process themselves with a line down the center of the document.  What causes cela and how to eliminate the line?  If I use the glass screen, the documents do not have a line through them.

  I would like to clean the scanner bed and the Automatic Document Feeder (ADF) to remove any buildup that could cause this quality problem that you are experiencing. Pages 184 to 188 in the manual for your model of printer has instructions to clean all parts of the appliance that could cause the problem. I would start with the ADF since it is the part that is in use when you report the problem. Here is the link to your manual.
  http://goo.GL/bkOVx

  I hope this helps.

• HP OfficeJet Pro 8610: Impossible to activate the scan of the computer, complete the installation of the utility

  I'm not able to activate the analysis of my desktop computer or my laptop. I pedaled power the router, printer and computers, ran disk utility and repair permissions, I uninstalled the printer and reinstalled. I received a message that the installation of the HP Officejet Pro 8610 has been completed successfully, but when he goes then HP utility-Setup-HP Officejet Pro 8610, happens to alerts from HP and I get the error message: "a critical error has occurred. Please restart the application, and then try again ' and I am unable to continue. Download and open HP Easy Start are successful but he opens the HP utility at the end and I get the same message once it arrives to alerts from HP.

  Opening to the high HP utility-HP Officejet Pro 8610 and clicking on scan settings, Scan of the computer initially appears without the box checked to activate this function and the error message: "the computer Scan is disabled. You can always start the scanning of your computer software analysis - for example, HP scanning "." Click on the button to activate the Scan of the computer generates this error message: "error of Communication. Unable to communicate with the device. Check the cables and the connection parameters. If the problem persists, try restarting your computer and the HP device "."

  In the window of the printer, press Scan and the Scan of the computer selection produces the error message: "not found computer. Scanning software HP is required for this feature. If installed, open the HP utility and under settings of scanning, select scan to computer and enable "."

  I tried everything suggested, and what I found online to try.  I'm missing something or not doing something correctly?

  Thanks for any help!

  Hi @3star8,.

  Welcome to the Forums of HP Support! I read your post and see that you are unable to activate the computer option via the software scan. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I think that the procedure described in this post, will help solve this problem. Here is the link: Re: impossible to activate the Scan.

  This is the URL of your drivers, e-all-in-one-HP Officejet Pro printer 8610 series full feature software and drivers.

  Please let me know the result and if there is anything else I can help you. Thank you.

• Impossible to activate print them to the use of the computer iMac 10.8.5 and HP Officejet Pro 8600... HELP!

  No matter what I tried, download the latest software updates, with the iMac, router, printer and turned off, I can not activate the computer option analysis I can print, copy but when I try and scan to the computer it tells me to activate the option "scan to computer" via the HP utility. This gives me just an error message saying that it cannot communicate with the printer and check the cables... doh... !!

  If anyone can help me before I throw everything out the window would be more useful...

  This 8600 is a new printer. My old 6700 was fine before he died after 1 year... !!

  Help...!

  Hi gworilla,

  I'm sorry to hear that you are having problems scanning with your new 8600 Officejet and your iMac.

  I have included a document with measures to correct connection errors when you try to scan for detailed troubleshooting. Please choose your operating system (Mac OS X 10.8) and if you have a USB or network connection.

  A "connection error" or "No computer has detected" Error Message is displayed when scanning

  http://support.HP.com/us-en/document/c02915410

• HP Envy 100 - impossible to activate the scan from the printer

  I use an iMac end of 2012 and spin the Mavericks. Envy is connected to my WiFi.

  I was never able to get the urge to turn on a scan from the printer. When I press on the analysis on the printer, I get 3 options and choose 'computer '. I can get some information from introduction to scanning the computer. He says this analysis for computer is activated automatically when the printer is first set up and I need to have installed the HP printing software. This means to me that something has not been properly Setup and I can't work it out. I just updated my software as a result of Mavericks. I regularly print to the printer and am able to activate a scan of my computer.

  I read a few posts on the software uninstallation. If necessary, I don't know what needs to be uninstalled and reinstalled and how I could do that.

  Can anyone help?

  Thank you

  HI - my apologies for the slow response.

  Would it not possible to check to see if "Scan to Computer" is enabled in the utility application from HP?  This application must be in the folder Applications/Hewlett-Packard.

  Once the application opens, you may need to select your device if it is not already selected.  The configuration option "Scan to Computer" should appear at the bottom of the document window (see attachment "Utility HP - selected ENVY").

  Try to open the "Scan to Computer" configuration item and display settings.  Please refer to attachments "utility HP - Scan to computer do not activated" and "Utility HP - compatible computer Scan" for what that might look like if the feature is enabled or disabled.

  Let me know what you see.

  Also - since your connection to the printer on a wireless network, have you tried to move the printer closer to the router or wireless access point wireless?  I'm curious to know if there may be some intermittent network connectivity that is to interrupt the function computer scanning.  I would try to move the printer right next to the wireless router access point / wireless to see if that helps the issue.

  I will continue to work on this issue for you to get the help you need.

• wake the computer to run an antivirus scan

  Is it possible to activate the computer to run an anti-virus scan?  I use The Shield antivirus program, and when I schedule a task to wake the computer and a scanner, it is unclear what part of the computer to scan and so he does nothing.  I don't know if the field "argument" is where I said what file to be reviewed or what, but I couldn't begin to know what to put as the argument anyway.  I can program the computer to run a scan when he's awake.  There is a task called awake auto that wakes the computer; It is a task that I could plan to run before the antivirus scan to allow the scan to run without the Task Scheduler from the analysis?  Do you know if the task of awakening auto has a path?

  Hello

  Please look here for detailed information:

  http://www.Vistax64.com/tutorials/166809-Task-Scheduler-wake-up-computer.html

  Concerning

• How to access the computer management?

  Original title: computer management concole restricted by policy
   

  How to enable access to the concole menagement computer which is limited by the policy snap-in?

  Hi Nikola Dragutinovic,

  Welcome to the Microsoft Community Forums.

  According to the description, it seems that you do not want to activate the computer management console, which is limited by the policy snap-in. I'll be happy to help you with this problem.

  The setting of group policy to restrict users to the explicitly permitted snap-ins list lets you selectively enable or disable the Microsoft Management Console (MMC) snap-in. However, before enabling this setting, you must activate the settings in the folder "restricted/permitted snap-ins" software snap-ins MMC that you want to use.

  I suggest you to follow the steps from the link and check if it helps.

  You must enable explicitly pluggable MMC that you want to use before you enable the group policy setting "Restrict users to the list of snap-ins explicitly allowed" in Windows XP and Windows Vista

  http://support.Microsoft.com/kb/931865

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

• Connection Officejet 8500 for Apple AirPort Extreme

  I have on two devices.  The airport has a network running running.  I plugged the Officejet 8500 at the airport with a network cable.  When you open AirPort Utility, he does not see the printer.  When you use the printer menu, I was not able to find the right method of connection to the network.

  No, you can use (and use) Ethernet.  It's just that Airport utility didn't report it because it is not plugged into the USB port, which is good.

  Now that the printer is connected to your network, download and install the latest version of the software for your printer from the "Support & drivers" link at the top of this page.