OfficeJet 8500 product constant network activity

Similar Questions

• HP Officejet 8500 printer A909b does not connect to ethernet wired network.

  This is my first time on a forum & I am hopeing for some successes my network with printer setting

  .

  I am networking two PC Win XP, SP3, running with a printer Officejet 8500 A909b via a Netgear router.

  Previously, I had the printer connected by USB to a PC as needed with no problems except having to change the USB between PC to print.

  I tried several times to uninstall and reinstall the printer software, disabled the firewall & Anti virus, reset the router, reset the printer network settings & them restarted everything with no success.

  I printed the network configuration page & tried to enter the address EWS (http://0.0.0.0) in the browser Web without success either.

  I found the lights on the printer on the ethernet port does not at all & tried four different ethernet cables all work elsewhere. I tried all four ports ethernet to the router also.

  Thanks in advance for any help I receive.

  Concerning

  Allan

  Hello

  As network lights are not flashing when the cable is connected and the PC works with the same cable, which seems to be a faulty network card defectueuse on printer, please contact HP and they should be able to help in this regard.

• OfficeJet 8500 Network Install problems w / router Dlink DIR655

  I can't get a Dlink DIR655 router to allow an Officejet 8500 complete installation of the software on the network. In XP, the printer configuration page has verified it is up and running, has an IP etc. I have tried everything I can find on the router and computer, closing firewall, antivirus. change the router settings and enabling except addresses etc. Someone at - it ideas? Work very well etc, Internet network that allows other computers to access the internet.

  Thanks for any thougts or help,

  Albie

  Thank you for the replies, I solved it and it may be worth to post it here.

  Manually, I entered an IP address to match the range of the router, but could not get the software to install, with the help of a technician HP online by plugging directly into the router. Plug on the home network wired, rendering the printer not available online.

  Here is some of the best. I just had a connection 2nd broadband ISP of Shaw cable, our television provider and used in this regard to implement this printer. I bought the identical DLink 655 Router I use as a DSL connection if the telephone line. (I wanted a 2nd backup internet and I also wanted to test the speed of 2 services)

  Once I lost the printer when connected off the router, I took the router of Shaw in offline mode and plugged the router DSL for the home network. THE PRINTER WORKED PERFECTLY! What a great lesson for a guy who has spent many hours reading and following all possible solutions, he could find!

  So for anyone out there that might help, I thought that I post and once again thank everyone for their great posts and help here, as well as responses to me.

  Either way, Shaw router started blocking my outgoing email this morning. Another thing, they make for us to send our email out through another address, one of them.

  I hope I helped someone along the way.

  Best wishes of the season for everyone

• Printing with Apple products on a HP Officejet 8500 wireless...

  How will I know if my HP OfficeJet 8500 wireless is compatible with AirPrint for printing? P

  Hello

  First of all, please check if your printer in the list:
  
  http://support.Apple.com/kb/ht4356
  
  If so, you can use this hotfix/install:
  
  iPad: http://www.apple.com/support/ipad/assistant/airprint/
  iPhone: http://www.apple.com/support/iphone/assistant/airprint/
  
  If NOT you must print using other applications (if applicable) such as
  
  http://iTunes.Apple.com/au/app/HP-eprint/id299531647?Mt=8

  Kind regards.

• OfficeJet 8500 Prime will not connect to wireless for the scanning of email

  HP Officejet 8500 first.

  Western Digital N900 router

  Printer is connected to my home wireless network and wireless to my HP Pavilion laptop (which is in the same room).

  I felt for a few years and I do a LOT of scans to myself on my e-mail and rarely have problems.

  About a month ago, I got a new wireless router, and the problems started.

  I had the wireless configuration.  Printer connect to my home wireless.

  If I try to scan to e-mail, I get a message "unable to connect to the server. Check the address and the name of the server.

  I can print from my laptop very well (wireless)

  I have run the wireless network test report (which incidentially, does NOT use the default tray as specified in default values, so I have to remove the media in a status bar and replace them with paper to make turn this test).

  All passes.

  very good signal strength.

  no other network with the same ssid

  Wireless networkes detected: 3

  Channel 11

  everything looks great.

  I connect to my router (from my wireless laptop).

  My router says that the printer is on the network.

  I turned off/power on router to reset.

  I tried the reset network default printer and returning via the wireless Assistant.

  I tried another wireless (5g below)

  I got the preferred wireless network name and password several times.

  I turned the printer deactivation / activation.

  The SSID signal is using 2.4 Ghz (802.11 B + g + n) 20 / 40 mhz channel (auto) AND I ALSO tried with channel (11) just

  The router includes a 5 GHz (802.11 a + n), but the printer never sees this SSID, and tried manually enter the name and password as well.

  I get the same error every time.

  Sounds like you arehaving problems with scanning to email. Can you tell me first if you have tried all the other email accounts other than the one you are using. According to the security on the SMTP servers for the customer, you will have to go and try another account. I suggest to make a Gmail account and attempt to put in place the new feature.

  I would like to know how this happens, and I'll get back right with you!

  -Spencer

  PS I hope you had a great weekend and had a wonderful day!

• OfficeJet 8500 Wireless problem

  Hello - my printer all-in-one Officejet 8500 wireless worked fine until I replaced my router to a BT Home Hub 4. I have no problem with the router, but to use the wireless printer, I need to enter the key wireless, so it can connect it. Unfortunately, the upper half of the touch pad on the printer (where you select settings, etc.) does not seem to respond to touch the most so I have no way I know to enter the wireless key. The lower half of the touchpad where you select print options etc. seems to work very well.

  Is there a way I can work around by using the button on the printer? That's my problem can be solved easily or do I need an engineer visit?

  I use a MacBook Pro and iPad to print from then I am unable to use HP Print & Scan Doctor (although I could use that I don't know if this can help with the kind of problem I have).

  Please can someone help?

  Hey heavy-lou.

  I see that you have an Officejet 8500 Wireless and have a problem with the get connected to your BT Home Hub 4 router due to a problem with the screen on the printer.  I understand that you want to use the wireless printer, but it can be a little difficult to connect via the front panel with the display problem you mention.

  Temporarily, I would advise the printer connected with an Ethernet cable to get a valid IP address on the BT Home Hub 4.  Due to the display problem, it can be difficult to print a page of Network Configuration of the device.  However, the steps to do so can be found here.  However, you can access the SAP (built-in web server) the BT Home Hub 4 by typing the IP address of the network domain in a browser bar and pressing ENTER.  Once here you find the complete list of devices connected to the network and see what IP the HP Officejet Pro 8500 Wireless is assigned.

  Once you have the IP address of the printer, you can then type the following in a browser's address bar to access the Web integrated printer server.  In this section, you will be able to select the network tab and run the Wireless Setup Wizard is located in the SAP of the printer.  It will be able to bypass the display problem.  If necessary, check the encryption for the printer settings in the EWS network section to make sure that the settings are compatible with the current encryption on your network type (WEP, WPA, etc.).  Once the complete wireless Setup Wizard it will ask that the product be disconnected Ethernet network that the printer is supported both at the same time.

  I would like to know if it is able to help get your printer connected wireless to your BT Home Hub 4

  Jason

• OfficeJet 8500 has 910: Macbook Pro won't find my Officejet Pro 8500 printer

  Until recently, my Officejet 8500 910 has worked very well with my Macbook Pro, desktop computer wireless Mac and iPad.  Now, it will not be printed with any of these devices. Yesterday, he worked with my iPad, but today it says that it cannot find the printer. On my Macbook and desktop computer, it is impossible to find the printer when I try to add.  You can find the scanner and fax part of my all-in-one, but not the printer. I deleted all my printers and tried to add this back.  I've stopped and restarted. I checked that my printer is connected.

  I have same thing happened with a HP wireless printer in the 8600 series to work.  Sometimes he would find and connect.  Other times, it wouldn't. I appreciate all help.  Thank you!

  Hey @Jeanne33,

  Welcome to the Forums of HP Support! I hope you enjoy your stay here.

  I see that your Officejet Pro 8500 all-in-One Printer does not appear on your network. I can help you with that.

  1. As you only use Apple products means that the printer is no longer connected to your network or a parameter has been changed on your network. That being said, this is what we will do:
     Turn the printer off.
  2. While the printer is off, remove the power cord at the back of the router for a minute.
  3. When the lights came on the router, turn on the printer.
  4. Try to print.

  At this point if you are not able to print, then we will do the following:

  1. On the printer, click on Configuration, network and wireless view summary.
  2. If you see a line indicating connected the printer is properly connected to the network. If this is not the case, then, from the main screen, click on Configuration, network and wireless configuration wizard to add the printer to your network. Try once done printing.

  At this point, you should be able to print. If the printer still doesn't seem to add as a device for the Mac or appear on any other device and then you have a setting on the router that has changed. Your best option would be to communicate with the person who is provided with the router and ask them to do the following:

  • Open all ports.
  • Select multicast.
  • Disable MAC filtering/MAC cloning.
  • Disable the guest network
  • Make sure that the router has a band of 2.4 GHz.

  Please let me know if this allows you to print or if you have any other questions. If not, have a great day!

  If this solves your problem, then please help others find this post by clicking on accept as Solution on my post.

  If you appreciate my help, so please let others know by clicking on the icon below my post thumbs up.

• OfficeJet 8500: Cannot parse after upgrade Windows 10

  After the upgrade to 64-bit Windows 10 Pro, I can't scan my OfficeJet 8500 909n.  I get this message:

  "The analysis cannot because another program or computer using the networked HP imaging device. Try again later. »

  I have a / re installed HP Solution Center 5 times.  I restarted routers.  I'm power cycling my PC and the printer several times.

  I can print to this printer from three PC.  I can't get the scan to work as before.  This has been driving me crazy for more than 5 hours.  I'm honestly ready to go back to Windows 7.  The printer is connected via the cable network.

  Can someone please help?

  Thank you.

  Kind regards

  Jim

  Hello

  Thanks for the comments, you can try this alternative software:

  HP extended Scan
  
  FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi
  
  Once it has downloaded and installed, go to start > all programs > HP > HP Scan extended > Run "HP Scan extended.
  
  Let us know if it works.

• OfficeJet 8500 A910: Officejet 8500 A910 think all black cartridges are empty

  OfficeJet 8500 A910 keeps telling me to replace the black cartridge to continue printing.

  First, I removed the cartridge (which was 3/4 full), he looked at it and put it in.  I was able to print 10 pages until it gave me the same message.  I did once again and was able to print 2 pages.  Finally, I put in a new cartridge.  The printer told me it was happy.  I printed 10 pages until the replacement cartridge message came again.  I removed the new cartridge and put it again.  Print more than 10 pages.  Now it does not PRINT because the printer think to replace the full cartridge.  I tried to close, replacement print head cleaning all ports.  cleaning the contacts of the cartridge and print head, changing the yellow cartridge.  NOTHING IS THERE FACT.

  It seems that the sensor is messed up, but where is this sensor?  O for the day where I was allowed originally instead of the treatment of the HP me as I have the brain of a worm.  If I could just disable all the sensors on this printer, it works fine, but HP wants to control everything, so nothing works.

  Does anyone else have this problem?  Anyone find one solution other than a new printer?

  Hi @CWickstrom,

  Welcome to the Forums of HP Support!

  I see that you are unable to print because of the warning of low ink on your printer HP Officejet Pro 8500 A910. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem.

  To help you better, I may need more information.

  What is the exact error message that you receive?

  I would like to do a hard reset to see if that will solve the problem.
  Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
  This ensures that the printer is full on and can help this situation.

  • Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  You use genuine HP cartridges? How to identify genuine HP cartridges.

  Note: HP recommends you to use genuine HP cartridges. HP does not guarantee the quality or reliability of cartridges HP cartridges refilled HP. If you use genuine HP, the following cartridges no can not solve the problem.

  I see that you mentioned that you have replaced the print head, did replace you one or both?

  Click here and update the firmware of the printer.

  HP Officejet Pro 8500 a (A910) e-all-in-One Printer Series - 'replace the depleted following ink cartridge ' message on the product after you have installed a new cartridge.

  In addition, there could be a problem with the distribution of ink system please follow this guide, solve the problems of quality Print for the HP Officejet Pro 8500 has e-all-in-one printer series.

  IMPORTANT STEPS!

  Evaluate the ink supply piping

  Follow these steps for the evaluation of the ink supply piping.

• The analyses are not in line. OfficeJet 8500 has more

  My OfficeJet 8500 has more analysis not evenly.  The upper left area is darker than the rest of the document.  A way to fix this?

  If you have performed all troubleshooting, including the cleaning of the surface of glass scanner, then I would say you are right in your assessment of the defect.  How long have you had the replacement product?

  However, I have one last thing, I would like for you to try.  I have the steps for to do you a factory reset on the printer.  I'll send them to you via private message.  Please check your Inbox for messages in the forum.  Before you perform these steps, please read Bob_Headrick wire on the printer reset, found here.

  If the product is still under warranty, then I suggest call HP for Technical Support on this device.  If you are in the USA / Canada, then the number to dial is 1-800-474-6836.  If you are not in this area, please click here to access the global contact list for HP Technical Support.

   

• OfficeJet 8500 A909a: Drivers won't load not

  I try to install my Officejet 8500 A909a (that I have connected to my wireless network) on my laptop. I go to the tab drivers and software, select the correct printer, and brings it to the top of the page where it is supposed to compile the list of drivers. The page says "HP is compile your results." It could take up to 3 minutes, depending on the speed of your computer and connection. Thank you for your patience. "The page has been loading for more than 30 minutes without any search results. I tried to add the printer in the "devices and printers". The printer is recognized by the laptop, but do not print due to not having a driver. Help! The printer works for all tablets and phones in the House, but not to a laptop!

  @AmandaHall

  Try to run this.

  HP printer install wizard for Windows

   

  http://ftp.HP.com/pub/softlib/software13/COL50403/MP-150580-2/hppiw.exe

  After that.

  HP Print and Scan Doctor

  http://ftp.HP.com/pub/softlib/software13/COL50849/MP-145514-3/HPPSdr.exe

  REO

• Scanning from OfficeJet 8500

  My OfficeJet 8500 has stopped printing.  After removing the ink cartridges, I tried to use it as a scanner only.  The screen of the printer has a message that the ink cartridges are missing.  The all-in-one will not be replied to attempts to exceed this message and certainly don't scan.  Remove the ink cartridges to disable all features for the all-in-One?  Is there a way around this problem?  If this is not the case, why HP would design a product that would not allow the use of operational duties when others have been disabled?  Really strange.

  You are right. The printer will NOT work without the ink cartridges. If the cartridges are very low and you want to just scan, which is perfectly fine. You need to place the cartridges in the printer so that it continue to feature.

• Windows 8 scanning on officejet 8500 has more

  After the upgrade to Windows 7 to 8, I am unable to scan using my OfficeJet 8500 has more.  Downloaded the latest troubleshooting and printer seems to be installed, and is the default.  I am able to print, but when I go to print Center and select the option analysis, I get an error message that the printer is not installed.  Same thing happens if I try to trigger a sccan of Acrobat 9 pro.  When I I select the printer from the drop-down list at the bottom (only one), I get an error that there is a network error.  Monitoring of the parameters of the firewall enabled (by default the firewall windows at this point) does not measures on site, in case of problems.  Tried to remove and reinstall the printer, but also the re-launch of the connection Wireless to the printer, No go.

  Am able to print wireless without problem, it's just scanning it is a problem.

  Hello TainoTechy,

  You will need to uninstall the instances of the Officejet pro 8500 Control Panel

  just start typing Control Panel , which is expected to open the Control Panel window.

  Click uninstall a program , which is under "programs".
  Locate for HP Officejet Pro 8500 has "entries and Uninstall the."
  After all programs associated with HP Officejet Pro 8500 has "are uninstall, you can restart the PC."
  Download and install the software for the same thing using the link below...

  OfficeJet 8500 software to win 8

  Kind regards
  Jabzi

  Help the community by marking this post.
  Your question has been answered? Mark it as a accepted Solution!
  See a great post? Give it a Bravo!
  I work for HP

• HP OFFICEJET 8500 A. slow to start printing

  HP OFFICEJET 8500 a take sometimes several minutes to begin network printing.

  Hello Dexterkay,

  Welcome to the HP Forums!

  I understand that your Officejet 8500 a print slowly. What is your operating system on your computer? Windows or Mac? I recommend the rest of this document from HP on the Impression of slowness.

  Please post your results, I'll be looking forward to hear from you.

• Connection Officejet 8500 for Apple AirPort Extreme

  I have on two devices.  The airport has a network running running.  I plugged the Officejet 8500 at the airport with a network cable.  When you open AirPort Utility, he does not see the printer.  When you use the printer menu, I was not able to find the right method of connection to the network.

  No, you can use (and use) Ethernet.  It's just that Airport utility didn't report it because it is not plugged into the USB port, which is good.

  Now that the printer is connected to your network, download and install the latest version of the software for your printer from the "Support & drivers" link at the top of this page.