OfficeJet Pro 8600 + and Inkjet printable BD - R

Similar Questions

• Need help to set up officejet pro 8600 and scanning to the network on OSX Lion folder

  Hello

  I'm trying to implement my Officejet Pro 8600 more scan to a network under OSX Lion folder.  I have correctly set up the printer otherwise (and can scan and flown from my Mac).  I created SMB sharing as described in the documentation.  My only question is what to enter in the Web server of the printer when it asks for the network path of the shared folder.

  For example, I have the following shared folder:

  / Users/me/Documents/scans/Durable goods received

  on my computer that has name is:

  My iMac

  has an IP address:

  172.16.1.4

  wonder web server of the printer a network path (for example: \\mypc\sharedfolder) but I do not know how to translate my way above in the correct format.

  I tried the following:

  AFP://172.16.1.4//users/me/documents/scans/durable------Goods\ recipes

  but he doesn't like it.

  I also tried:

  Recipes of \\172.16.1.4\Users\bvz\Documents\scans\Durable of goods.

  Nothing helps.

  Thanks for any help or ideas!

  Hello

  First of all, make sure to install the latest firmware for the printer.

  SMBX (used by Lion sharing protocol) support added lately, and the device fails to access any forlder Lion shared with an older FW version:

  http://support.HP.com/us-en/document/c02919168

  You have shared the folder durable goods received ?

  If so, I guess the correct path would be as follows:

  \\172.16.1.4\Durable goods received

  Please let me know of any changes,

  Shlomi

• HP officejet pro 8600 and connectivity

  I have a hp officejet pro 8600 more and that you have connected the system to my old pc (win xp operating system) via a USB cable.

  I also want to use the printer from my laptop (WIN 7 64 bit) via my wireless network.

  I took a peek on the site www.hp.com/go/customercare and I'm still unsure of what I need to make connections and what setting I should follow to get the old PC and my laptop running.

  Should I remove the USB cable and set up a WiFi network only, or use the USB and wireless network?

  Assuming that both computers are connected to the same router wired / wireless, then the easy way to do this is to connect the printer to the router (only).

  I recommend that connect you the printer to the router with an Ethernet cable, if it is located close to the router.  A Wi - Fi connection is also possible.  Use the Wireless Setup Wizard in the network menu on the front of the printer to establish a wireless connection.

  Once the printer is connected to your router, download and install the latest version of the software for your printer from the "Support & drivers" link at the top of this page.

• I have a HP Officejet Pro 8600 and when face I get a thin black line

  HP Officejet Pro puts a thin black line on my pages

  Hello

  You are able to print a self - test page, or print a document - you get the same black line when printing.

  You try to copy from the glass of the scanner or automatic document feeder?

  If the printout is fine without the black line and the problem only occurs when you copy - follow the steps mentioned in the document.

  http://support.HP.com/us-en/document/c02881567

  Although I am an employee of HP, I speak for myself and not for HP.
  Click on the star of CONGRATULATIONS on the left to say 'thank you '.
  Please check one response to "ACCEPTED solution" if it has solved your problem, while others may find it.

• I HAVE AN OFFICEJET PRO 8600 AND cannot NOT SWEEPING

  I'M ON WIN7 X 64 AND THE OFFICEJET 8600 PRO CAN PRINT BUT WHEN I HIT SCAN, AND ERROR MESSAGE ICON if POSTER INDICATING the PRINTER CANNOT BE FOUND.  ALSO I AM NOT ABLE TO DELETE THE DRIVER TO REINSTALL.  THIS WAS INSTALLED ON MT NEW hp DESKTOP.

  I have HAVE A HP LAP TOP WITH THE SAME OS AND DO AND what PROBLEM.

  I have

  How is the printer connected? (USB, ethernet, wireless)

  If USB:

  Disconnect the USB cable between the printer and PC

  Unplug the power to the printer

  * Restart the PC

  * Once the PC is restarted, plug the printer back in power

  * Reconnect USB cable between printer and PC

  If network:

  Unplug the router power

  * Wait 30 seconds

  * Plug the router back in power and wait to turn on completely

  * Restart the PC and unplug the printer from power source

  * Wait 30 seconds

  * Plug the printer to the power source

  So, have you tried running printing HP and doctor Scan?  It is an automated tool provided by HP to help solve the many problems of printing/scanning.  The PSDR HP can be found here.

  As unable to uninstall the printer: there is a utility developed by Microsoft to help troubleshoot when a program cannot be uninstalled or installed.  The Microsoft FixIt tool can be found here.

  I hope this helps.

• OfficeJet Pro 8600 and OS Mavericks

  Every since the loading of the Mavericks on my Mac, I can't scan life airprint.  I can print, but he fails to make an analysis of the preview when I ask for a scan.  I removed the old drivers and reloaded your new drivers approved by Maverick, but no luck.

  Hello

  An options that you can try is to reset the printing on Mac system. What can happen, is that the printing system is held previous printers. Note that if you do reset the printing system, it will remove all printers listed. You can add printers back by clicking on the sign plus (+) sign in the lower left corner. I've included the document 'OS X Mavericks: reset the printing system'.

  When you try to scan with the HP scanning software installed, you get the error messages? I've included the document 'how Scan: OS X v10.9'.

  Please let me know if you still get the same error message when you try to scan from the preferences system ("Printers & Scanners), preview and Capture of Image.

  Thank you.

• HP Officejet Pro 8600 and Windows 8.1

  Vietnamese to 8.1 Windows installation, my printer worked fine.  I installed Windows 8.1 and came across the message - the printer error - before you can perform printer - related tasks...  I deleted and reinstalled the printer and it worked.  I printed several documents yesterday.  This morning went to print and the same error message is appeared, printing error.  I checked under devices and printers, and the HP printer has been grayed out.

  Please help in this matter.

  My suggestion would be to delete the old settings you have on the PC and re configure to Win8.1

• HP Officejet Pro 8600 and default values of Open Office

  I bought this printer about 18 months ago and have used it several times to scan documents and convert them into editable text. Output to MS Word and was brilliant.

  I was recently required to install Open Office and since then, the printer ran out of this program. The result is a confused mess.

  How can I tell the printer to use MS Word and not Open Office?

  Thanks for your help.

  Hello

  Locate a document scanned with HP software in your Documents folder.

  Right-click on this file and select open with and click on choose the program by default, and then select the word in this list.

  If she's not licted, click on the browse option and choose WinWord.exe in the Program Files folder.

  Hope that helps,

  Shlomi

• The request already expired window. How to disable and re-enable WebServices on officejet pro 8600

  I have an officejet pro 8600 and waited a few weeks before going to eprintcenter to add the code for the printer I got. Now he says he is no longer valid and I can't understand where to turn them off and reactivate the WebServices on this printer to get a new code. Help, please!

  Hello

  You must click on the application of web services on the printer.

  

  Go to settings > delete web services.

  After that, you can return to the same area and re enable it.

• OfficeJet Pro 8600: Help: I changed the cartridges and they are locked (JO 6800)

  I had a few problems print quality with my OfficeJet Pro 8600 and I changed the ink cartridges (950/951XL). Unfortunately, the problems are remained so, instead of buying a new printer head, I bought a new printer: a 6015 OfficeJet at Staples. First of all, I had to install the set up of the cartridges but pass them the old printer, which I had already brought to the depot of garbage to new XL versions. And guess what? The cartridges were locked! Now, I have to remove the locks in the old broken printer (what is left) or I can throw them-which is a shame because I bought the new 8615 especaially because it uses the same (expensive) XL cartridges. Please HP: help me. A loyal customer.

  Any cartridge that is installed in your Officejet Pro 8600 would not be usable in another printer, including a different of Officejet Pro 8600 8600 Pro Officejet "cartridge protection" was defined.  This cannot be reset, even in the original printer.  Turning off the cartridge of the printer's built-in web server protection will not affect future cartridges installed in the machine.

  Given the circumstances, I suggest call HP and ask if they can help to.  If they decline please post here and I'll see if I can help with a different approach.

  You can disable the protection of the cartridge in your Pro Officejet 8615 for the future.

• After installing hp officejet pro 8600 I can't access the toolbar at the top to access all my favorites? How do I get back them?

  My son-in-law installed the hp officejet pro 8600 and cannot access the toolbar above or get it to sit still without moving. So I can't access my history, bookmarks, etc..
  Even with the toolbar at the bottom as well.

  Right-click in the empty area (next to the tabs) and make sure that the option 'Bar' personal is selected. I hope this helps.

• HP Officejet Pro 8600 more print but not scan

  I have an Officejet Pro 8600 and I use Windows 7 Ultimate (64 bit) and it print and copy but will not scan. I had a hell of a time trying to get this thing to scan - I even spent an hour and a half with HP technical support and they could not fix it and finally gave up and call me Micro$ oft said that it must be a windows problem (Windows is up to date, incidentally).

  I tried to open the scanner software and nothing happens when I click the icon - the loading icon flashes for a second, then only the mouse pointer. Nothing happens if I try to boot from all programs. Nothing happens if I try to scan to the computer of the other printer told me the failure of sweeping and that there could be reasons of severalpossible (unrelated, software used, etc.).

  I have installed and uninstalled. A couple of times he was having trouble with the installation, but finally got it connected. Once it would not uninstall in Control Panel until I did it directly from the HP folder. I connected it by USB and wireless. I installed the version of bloatware. I cleaned that out and I tried the only version of drivers. The HP support person had me go and removed a bunch of stuff in the registry. I tried to run as an administrator. Nothing works. I even tried to scan using Windows Fax and scan. I disabled Kaspersky and made sure that my firewall is turned off.

  I am at my wits end with this and certainly regret my purchase at the moment. Help!

  Hello, it happens to the analysis of Windows (WIA) and generates an error:

  "The Windows Imaging service does not work... If the problem persists, you will not be able to scan using the applications that use this service, such as Microsoft Paint. Scanning software HP could still work. »

  It asked me to restart, and then re-run the diagnostic tests, but I got the same result.

  Then, I jumped to HP Scanner Twain and got another error:

  "The Twain component is not working properly because the product is used by another process. Save your work and close all applications. Turn the product off, turn it on again, and then click on restart and repeat the test. »

  He told me then the problem persists to uninstall the software, then reinstall the Full Feature software (I did, but available).

  * EDIT

  Problem solved!  After you had me run the diagnostic tool I googled the WIA problem and found that many other people had the same problem. A person has a response from Micro$ oft saying that it was a Windows 7 issue and how to fix it - this is the text I found:

  To start the WIA service, you need start all services of dependence. To start the dependency services, please follow the steps mentioned below:

  -> > click on start-> type "services.msc" and press ENTER, once you get up the services window, please do the rest steps.

  -> > first check and write down all the dependency services: -

  -> > right WIA-> properties-> tab dependence, check the services of name listed there.

  It must contain the following services:

  * RPC remote Procedure Call

  -> > DCOM Server process Launcher

  -> > RPC end point mapper

  * Detection material core

  Make sure that all of the above services are started in the services list.

  Last time, we started the Detection hardware Kernel, which solves our problem.

  (Andy, it's important.  Choose "Detection hardware Kernel ' and start this service which should start your 'Windows Imaging Acquisition '.  If it does not then select WIA and change the departure to "automatic".  This fixed my problems) after all dependency services start, please try to start, WIA service to solve the problem of .                                                                                                                                                                                       

  (For those who are doubtful with computers, like me, when you click on the start icon, you can type services.msc in the box of research programs or click on run and type it in there). Once inside the list of services, you can look at the dependencies by right-clicking on the Windows Image acquisition service and selecting Properties. Take note of these dependencies. Then back to the main list and watch to see if these dependencies are started. My Shell Hardware Detection says disabled, so I right click on it; However, starting selection is grayed out and I couldn't select it from the drop-down list box, so Startup type I selected Automatic, apply, close the Services window and then started my Scan software and presto, it worked.

  Thanks for setting me on the right track!

  
  

• OfficeJet Pro 8600 appears twice in the selection of drop down menu printer with each of the different names.

  Hello!

  I recently acquired an Officejet Pro 8600 and immediately connected to my network wireless as stated in the manual. No other type of connection has been used beforehand and the operating system is Windows 7 64 bit.

  After that the installation of the printer driver appears twice each time that a program asks me to select a printer from the drop of the printing devices in the typical menu of preparation of printing.

  There is an entry for "Officejet Pro 8600 (network)" and something in the sense of 'HP95CDN' (Officejet Pro 8600). I can't remember the exact names off the top of my head, but it is the name of the printer with the 'network' in brackets in one case and a kind of shortcut ID printer with full name in parentheses in the other case.

  According to the program, one of the options gives the desired impression while the other simply causes a queue of indelible impression for the name of the unit in question that is stuck to a few KB of data transmission.

  Usually printing works with the device with the identification of the printer in its name, but I recently had a case where with LibreOffice printing only works with the other choice.

  Can someone explain to me exactly means?

  See you soon,.

  Pete

  Direct entry Wireless will be visible under menu so direct wireless is on... However, since you are able to print another icon (not the network icon) I assume direct wireless is off coz you will not be able to print from wireless directly on the printer if you are connected to the router.
  
  I believe that the icon of the printer (not the network icon) has a port WSD assigned and is automatically detected by the operating system and installed.
  
  Go to service window and check if you have any input that says function Discovery Provider Host and see if it is started. Try to stop the service, and remove the icon of the printer (not the network icon) in the print server properties.
  
  Restart the PC and check if the icon comes back or try to uninstall and reinstall
  
  Let us know the result

• Unable to connect my Officejet Pro 8600 to the network because of administrator settings

  Hello

  I recently bought an opportunity of Officejet Pro 8600 and I am unable to set it to my home network.  When I put in place-> network-> Wireless Setup Assistant (and all options in the network menu and many others) I get a message that says: "this feature has been locked by your system administrator or the person who set up the printer."

  Help, please.  How to get around this problem and unlock all the menu items that are locked?

  A milion, thank you

  D

  Hello derekd01,

  Welcome to the HP Forums!

  I understand that you are unable to connect wireless Officejet 8600 because you receive a message "this feature has been locked by your system administrator. I will do my best to help you!

  There is an administrator through the Embedded Web Sever settings, but in order to access it, it must be connected to a wireless network. Unfortunately, you are unable to access the wireless configuration. There are two options you can try:

  (1) you can connect an Ethernet cord, and then go to the Embedded Web Sever.

  (2) you can install the printer on your computer by a USB cable. Complete installation, and then follow this HP document convert a connected USB printer wireless. Once this operation is complete, you can access the Embedded Web Sever.

  Once you get this printer, follow these steps in the Embedded Web Sever:

  (1) at the very top of the page, click on settings, then password settings
  (2) if there is a username and password, please remove this item and click on apply

  Please post your results, I will be looking forward to hear from your part have a good night!

• Fax HP Officejet Pro 8600 more without a phone fixed?

  We just dropped our landline, and now I would like to know if I can still fax since my Officejet pro 8600 and all in one printer without a fixed line. You can send a fax from this machone using a wi - fi connection or somehow, connect it to a cell phone? Thank you

  Hello

  Faxing can be done with a telephone line in the fax below specifications:

  Support hotline:
  
  -Analog line - HP printers are designed specifically for use with traditional analog telephone services.
  -Service line digital / VOIP Service - HP does not guarantee that the printer will be compatible with all ranges of digital services or providers, in all digital environments, with VOIP or with all of the digital-to-analog converters.
  http://support.HP.com/us-en/document/c02858465
  
  

  You can also follow the installation guide of the fax machine as a reference for its requirements:

  http://support.HP.com/us-en/document/c02865260