OfficeJet Pro 8710: OfficeJet Pro 8710 Wireless is not available

Similar Questions

• Driver Windows 8 all-in-one Officejet Pro 8500 Wireless does not

  Hello!

  I recently got a new Dell Inspiron computer running the 64-bit version of Windows 8, and I have an Officejet Pro 8500 Wireless all-in-One Printer from a long time ago. I don't have the driver disk version, since I bought the printer until Windows 8 is out, so I tried to download it from the HP website. Whenever I try to run it, however, it is said that it is the extraction, but once gets it is over, nothing happens. The Installation Wizard is not pop up, and there is no error message explaing it. Help please?

  Thank you!

  wsquared123 wrote:

  I have a Dell Inspiron 15 3000 with a 4th generation intel core i3 processor

  How the printer is connected to your PC? USB or network

  HP all-in-One Printer Remote App for Windows 8.1 printer is located if it is connected.

  and HP and Capture app scanning allows you to scan with compatible devices.

  I hope this helps

• OfficeJet Pro 8000 Wireless does not wake

  New OfficeJet 8 k wireless bought about 3 weeks ago.  The installer went well, prints nicely when it prints. Problem is that he falls asleep and is not responding to print jobs, ping, http, HP net diagnosis... Essetntially, it "disappears" from the network.  However, if I reboot the router wireless, just the router, he wakes up, will launch the impression of the task that has been waiting in the queue.  When it is invisible network printer configuration page print correctly when the button is triggered.  Nothing I do on the printers of the controls (for example wake up wireless, shut down and restart,...) it reconnects to the network.  The only thing that works is to feed the router market.  Calendar does not appear to be related to the printers power saving mode directly (i.e. when the printer goes to economy that is still accessible for some time).  Seems to take from one day to the next, pretty much, for the "disappearance".  Disabling the firewall (Comodo) PC does not fix.

  The Setup is:

  • 2 computers (laptop w / XP pro and office w/XP home/Media Center)-both with the problem.
  • Laptop wireless
  • Office wired directly to a port on the router ethernet
  • DSL modem connects to the router

  Network configuration:

  • Router Edimax BR-6204WG (802. 11 g)
  • Computers use DHCP; term of the lease has changed to 'forever' - did not help
  • The printer IP static value. Static IP also configured in router (xxx.xxx.xxx.195)
  • Router IP address xxx.xxx.xxx.193; mask 255.255.255.192
  • DHCP range set to xxx.xxx.xxx.198 - xxx.xxx.xxx.220
  • WPA - PSK security
  • Channel 6 (neighbors using 1 & 11)
  • On the PC printer port is a port TCP/IP of STD.
  • Lates firmware & drivers installed everything autour

  Before this printer, I got a differrent print server (always connected, static IP xxx.194) who never had the problem.  It is a stable network that works intact for several years. I'm an it & network professional and at a loss.  Is ti software of the printer, the driver or the router?

  Any ideas?

  Sorry to take so long to recover.  I tried different solutions, no luck.

  So, I went with my gut and bought a new router (Buffalo WHR-HP-G300N).  My thought was that my 'old' router did not know how to wake up a sleepy printer.  New router has been working fine for a month.  Wakes printer very well.

  As another advantage, one of my kids will get to upgrade their 802. 11 b 802.11 G with my old router network.

  Thanks again.

• OfficeJet Pro 8000 Wireless does not detect network

  My Officejet Pro 8000 Wireless suddenly doesn't work when connected via USB.  Don't try to re-run the HP Installation Wizard, the program reports no network detected (if the printer is right next to the Macbook Pro, which has a full signal from the network).  If I manually enter the SSID he says that he finds not only the network.  Network Configuration AMPe reports

  Network offline status

  802.11 wireless status disconnected

  Wireless on COLLAR

  Wireless works FAIL

  Network name (SSID reported no run)

  0 detected wireless networks

  The blue wireless light is turned on.

  Any suggestions?

  I appreciate the try, Dean, but again did not make a difference.

  I talked to tech support and they put me through presses the button to reset the network settings and then drain power printer, and I'm back in business.

• Satellite Pro L40 Wireless does not and wont stop correctly

  Hello
  just got a Satellite Pro L40-15 1 week ago and it's been downhill.

  The Wireless does not work (and yes the switch is activated and drivers installed). Sometimes windows recognizes no device when I boot.

  And when I stopped he said blocking down, but crashes just on this screen.

  Now, I'm an advanced user, so I've tried many things. Can anyone help?

  Thank you

  As a first step, I would recommend to use the Toshiba Recovery CD and renew the operating system.
  Then update the Vista of the State. I mean to install patches and fixes Vista all published.

  Check this thread:
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=107665

  Here you can see that a missing patches can have a bad influence on the wireless network card and the entire operating system!

  Good luck

• HP officejet 4500 g510N Wireless does not scan full page

  I have a HP officejet 4500 g510N wireless and feels to lose on the first inch of each document that scan scan. I ran printing HP and doctor Scan with the same result.

  Someone at - it other ideas on what I need to do to fix this?

  This problem seems to be resolved by the power off, unplug the power cable, and then restart the device.

• Satellite Pro 6100 Wireless does not work after restoring from HARD drive

  After that restore disks for installing a new HD and use and to update XP sp2, the Wireless does not work and if the card is installed XP hangs then works in fits and starts. If the card not in place, not bad at all.

  Booting from a Linux CD, the card works perfectly! I assume that the driver is the problem. The wireless card is the original, an Agere MPC13A-20/R, with Toshiba p/n PA317U-1MPC.

  I have found some drivers Agere, but am not sure

  (1) if they are correct
  (2) how to install since the machine works in a way limited with the card in place.

  Any advice?

  Hello

  I checked the page of the pilot and the only available for Windows XP WLan driver is the driver of v.1.11.108 Agere.

  (1) just try to install this driver. If the driver is not correct or is not compatible, then windows will not install the driver and you will receive a notification. You just have to try

  (2) generally you may reinstall the driver from the Device Manager. Open network controller tree, and then you can reinstall the driver.

  But this is only possible if the windows started successfully

  PS: Have you checked the information of Microsoft Windows XP SP2 update on the page of the Toshiba driver.
  I discovered that you need to update several utilities if you have installed SP2 on this laptop.

• DVD Studio Pro DVD "supported disc not available".

  Hello Forum,

  I am trying to burn a DVD again an already existing DVD Studio, already registered and created the file pro with all the menus related to the video file.  Another company created the DVD Studio pro menu and queue in front of me, I replace the newly edited video and try to burn a DVD with the new video and audio files.

  I compressed the file Compressor 3.5 using the button create DVD in the compressor, I created a file DVD SD Mpeg2, audio and video.  Imported in the pro Studio already created DVD file, I have the burned DVD, but appears to "Support disc not available" when I try to play the DVD on my Imac drive (also not tried in a standard DVD player no chance)... I tried this twice now, the first time that I realized I had created a HD DVD, I also created a separate folder on the external drive as well.  When I click on the DVD that was burned it shows as: HVDVD_TS and no audio file.

  Can you please help me, I watched the video of youtube after another, but I'm not create from scratch, I know not at all unfortunately the program, but I use a DVD already created Studio, file with many menus already linked to the video and don't want to not recreate from scratch... I think this should not be so difficult, and definitely miss me something.

  Thank you very much for your help!

  -Tony

  Open the preferences of DVD Studio Pro and set it up to create the SD DVD.

  -DH

• Windows 7 home upgrade to windows 7 pro says that's not available?

  I can't use my anytime upgrade windows 7 home to windows 7 pro, I said that's not available.

  What can I do to upgrade to windows pro

  Microsoft sales ended for Anytime Upgrade and licensing of retail in October 2013. Otherwise, your only way to upgrade is by purchasing the retail full version or upgrade Windows 7 Professional license and use it with the wizard upgrade Express Windows 7 home Basique/Familiale Premium. I just checked amazon.com and all the licenses that I see are copies OEM System Builder:

  http://www.Amazon.com/Microsoft-Windows-7-8-software/b?ie=UTF8&node=1286119011

  This means the boxed retail copies request a bonus, while the OEM System Builder copies remain affordable.

  Full version (retail):

  -Includes the rights of transfer to another computer.

  -Does not require a qualifying earlier version of Windows.

  -Expensive

  Upgrade version (detail):

  -Includes the rights of transfer to another computer.

  -require a qualifying earlier version of Windows.

  -Expensive, but less expensive full version

  OEM System Builder version:

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  There is nothing wrong to use it too, especially that all future versions of Windows will be full versions.

  If you can get a copy of a retail license, you can do the following:

  If the license for Windows 7 Professional, you have access to is a retail version update or complete, you can use the product key and the Express upgrade to Windows 7 Edition Home Premium to Windows 7 Professional. First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation). Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Professional on demand, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Professional your files, programs and settings retained.

  Please note that the Express upgrade does not support OEM, MSDN-Academic, Volume (the student faculty licenses) license. If you are in possession of all these brackets, you will need to save and do a custom clean install. If you want to do it, please backup your Windows 7 Home Premium or according to edition currently installed. Some licenses for Windows distributed to tertiary level students are not perpetual, which means that you cannot continue to use the software after a course or graduating.

• P036TX Ralink Wireless is not available

  Dear users. I just bought a new HP laptop p036TX, but I can't get wifi to work. I installed all the drivers and updates available to your Web site for this product, but the wifi connection is not available. It is not even appear in the network manager or to the manage devices under network adapters, the only network that is Realtek PCI. So I can connect through the ethernet cable and use internet but I can not use wifi, can't even see my wifi device. Not sure if I need to activate the wifi somehow because on my keyboard it has no wifi icon at all. I checked the manual and there is no mention about wifi key. The F12 key, there is only the airplane mode which does not work, if I press it separately or with the FN, he does nothing. Other FN keys work well and I reinstalled the driver of QUcikButton as well.
  So my question is: How can I activate wifi {assuming that there is a key for activation of it} or what driver should I install so I can even see the network wifi device? Please help I'm desperate groing

  Troubleshooting steps: I tried to install several drivers from the Ralink site and 802. 11B drivers which is suppose to be the wifi device I have on this machine. Also tried several reboots laptop. I also tried searching google and went through a lot of topics here, but never found same problem or a solution to my problem. Would be grateful for any advice, thanks.

  I don't know exactly what card ralink I have because I do not see in the devices

  This problem has been resolved here

  http://h30434.www3.HP.com/T5/wireless-Internet-home-networking/problem-in-finding-wireless-LAN-driver/m-p/4597202

  Thank you!!!

• Photosmart Plus B209 wireless connection not available

  Hello

  I just got a new Photosmart Plus B209 because my old 4580 died. I had the old printer put in place for the wireless connection, but the new Photosmart told me that the network is unavailable. When I press help he told me to make sure that there is no connection and to check for interference. Well, there are none. Printer and router are almost side by side. I used the HP set up guide and he tells me that the network is not available (which it isn't because otherwise I wouldn't be able to write this online).

  I use a MacBook with a Timecapsule 10.5.8 and a cable modem D-link.

  Yes, the workaround is a bit tedious, but it works.  If you have another router (standard), we all connect to one and use WPS.

  In any case, let's try this:

  1. on the front of the printer: Setup > Wireless > default settings.

  2. on your look of computer for a wireless called "hpsetup".  Connect you to it.

  3. print a network Test Wireless in the menu of the wireless printer.  Get the IP address of the printer.

  4. type the IP address of the printer in the web browser address bar.  You should see the page in the printer settings.

  5. click on the network tab, and then start the wireless configuration wizard.  Follow the instructions.

  6. when the printer is connected to your wifi, re - connect your computer to your wifi and add the printer in system preferences > print & scan (click the sign '+' to add the printer).

• OfficeJet Pro 8000 Wireless does not connect to my new Airport Extreme router

  I've owned my Officejet 8000 Wireless printer for about a year and had no problems with it.  However, my old wireless router wasn't fully compatible Mac so I couldn't fix it with a password.  I now need a secure network, so I bought an Apple Airport Extreme router in December.

  Last night, I installed the router and it works fine on my iMac, my laptop and my iPhone.

  However, tonight, I'm trying to implement Officejet Pro 8000 with no luck.  I searched the posts here for 3 hours and am not finding the help I need.  Based on the other posts, I read, I describe my situation below.

  I am trying to set up the printer in my iMac Intel with Mac OS 10.6.4

  I'm trying to set up the printer with the installation wizard HP I just install the printer software.

  On the first screen of the wizard, it tells me that my device is not configured (I agree)

  Then I ask him to set up a wireless network.

  When I get to the network selection page, both my network AND my network of comments (that I let my neighbor use) are on the list with the full signal strength.

  When I click on my network and then continue, the HP installation wizard hangs and I have to stop, he.

  When I click on my guest and then network continue, I get the message that my network is not within reach.  (FYI, the printer is 10 feet from the router).

  I tried to power on/off the printer, the router and the computer at all different stages of the process with no luck.

  For my Airport:

  My radio is set to the most compatible choice

  MAC access control is not enabled

  Everything is WPA2 security

  'Use wide channels' and "Create a closed network" is unchecked

  The channel is set to 11

  I'm happy to try the "Add client in the network" thing I've seen on other posts, but I don't think that I have a front panel of the printer where I can start the "WPS" (don't know what it is) process.   If I do, it is not obvious and not in the HP manual.

  My ISP is Comcast (cable internet).

  I'd really, really grateful for the help!  Please let me know what I forgot to include information, and I will be happy to provide it.

  Thank you!

  OK to reset the printing system again, he may be blocked.

• OfficeJet Pro 8000 wireless: OfficeJet Pro 8000 wireless does not respond after a certain time

  I use my wireless OfficeJet Pro 8000 for quite awhile now, but I have a problem that I can't solve:

  Initially, it works allright. But after a few hours, it seems to go to sleep. And it does not print jobs more. I have to put the printer 'off' and 'on '.  After that, it will print the work queue.

  I searched a timer as issues in the web interface of the printer, but can't find anything that points to a solution.

  The printer is connected wireless to my router, using a 'fixed' IP address

  Can someone help me, please?

  Thankx

  These settings are to set up your wireless printer to stay connected to your router, wireless devices stay better connected and makes your router secure and hack proof.

  While the DHCP is convenient, devices like printers must always be assigned an IP (fixed) manually to avoid conflicts on your wireless network.

  1. Set a static in the printer IP address (click here) outside the range of the DHCP of the router (check your manual). It is for Linksys routers, but can be used for all routers. Check your DHCP range and change this first if necessary. More Help Wireless Printing is here (Windows solution 4, static IP).
  2. Or check in the printer "Auto off" is disabled the System Mode Time Out is set to zero (0) Use the built-in webserver (EWS) by visiting the printer address IP address in the address bar of your browser, click on settings tab/Auto Off. Or use the printer, printer Home Page (EWS) Wizard. Also check the properties of your printers.
  3. If the printer supports and has IPv6 enabled, disable the IPv6 option in the printer.
  4. If necessary and you have assigned a static IP address, try using auxiliary for the preferred DNS Server 8.8.8.8 and 8.8.4.4 as DNS server.
  5. Wireless printers work only on the 2.4 Ghz band.
  6. Make sure the printer is on the latest firmware by checking with the HP support site.
  7. Check all devices wireless in your home for interference. Check microwave, babyphones, phones, wireless and wireless alarm systems are a big culprit. Any of these will knock at your printer wireless intermittently.
  8. Make sure that your printer and router are at least 6 feet, independently of the other.

  In the router: (refer to the manual of your router for more information)

  1. Use a fixed wireless channel as the 1, 6 or 11, never 'auto', try channel 1 first then the rest.
  2. Set the router to 20 Mhz only or 145Mbps router function.
  3. Always use WPA2-AES encryption (personal), but you can try the "mixed" mode
  4. Disable the WPS and never use it and disable the UPnP for the security of routers. No one can hijack your system now and help with wireless connectivity (if you want to know why, research on the web).
  5. If you have a router dual band (2.4 Ghz and 5.0 Ghz bands), make sure the SSID is NOT identical, they must be different for all the bands, even for networks without comments.
  6. SSID broadcast should be enabled.
  7. Save all the settings. Food at the same time, wait 2 minutes.  Power on router wait 2 minutes.
  8. Marketing the printer and check that it reconnects to the router.

  Windows 7/8/8.1 is discovered the system on or off?

  1. Control Panel/Network and Internet/network and sharing Center / advanced sharing settings.
  2. Under home or work (current profile) / network discovery.
  3. Select "Turn on network discovery" and save the changes.

  Last resort effort - if your printer has an Ethernet connection, suggest you to get some adapters line and convert your Ethernet wiring for your printer.

• HP Officejet Pro 8500 Wireless does not parse better than 600 dpi

  I searched and found a lot of similar complaints.

  Integrated display HP can only analyze up to 600 dpi, while the specification specifies 4800dpi with possibility to increase up to 19200 DPI. Then I went to get the 4 800 DPI 600 dpi is ugly to analyze detailed pictures.

  On the web, I found similar complaints and the indication that the HP Solution Center installation allows you to select higher resolutions on the PC which cannot be selected on the printing device itself.

  I don't have a Solution Center then downloaded the latest drivers and reinstalled the printer. HP Solution Center appears to be installed as well, although clicking it leads to an error to complete installation of the printer. I tried to reinstall with the addition of a printer icon: everything looks OK, printer is on an 802.11 wireless network, but after you find the printer, the last message is always "printer setting failed" (is actually in Dutch: "het instellen van printer is mislukt".)

  The strange thing is that printing is not actually a problem (on the wireless), or scan to email.

  I downloaded HP Print next and doctor Scan and the printer works perfectly (prints the test page), but the Solution Center still gives the message that it can not start due to an incomplete installation of the printer.

  I played with the firewall, turn off Norton360, Windows firewall and firewall router and then put it back, but the problem remains.

  In conclusion: it seems impossible to get the famous 4800 dpi.

  Someone knows the way out?

  Thank you

  It looks like something has not installed right. The best thing to do is rub the software of the printer to the computer using the integrated printer cleaning brush. The steps below will guide you in the process.

  Starting a download:

  1. run the disk cleanup on your computer

  2. download and run the software and the drivers below.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-88604-2&cc=us&DLC=en&LC=en&OS=4063&product=3752459&sw_lang=

  3. once the download is done retrieve, cancel the download.

  4. click on the start menu.

  5. click on run.

  6. type %temp% enforcement

  7. Locate and open the folder starting with 7z (example: 7zS2356)

  8 open the Util folder

  9 open the CCC folder

  10. run the L4.bat uninstall_ for computers not HP.  For HP computers, run the Uninstall_L3.bat

  11. once the uninstall is complete, restart the computer

  12. access to the files program and program (x 86) and delete all records that relate to the software of the printer.

  13 install an Accessories\ System Tools Disk Cleanup

  14. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  15. use this tool to clean the system and the registry.  Note: This utility is not HP sponsored or approved.  HP and I are not responsible for damage or loss of data caused by the utility.  This step is optional.   You can skip if you want.

  http://download.CNET.com/advanced-SystemCare/3000-2086_4-10407614.HTML?part=DL-6271865&Subj=DL&tag=button

  16 download the drivers and full software features

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-88604-2&cc=us&DLC=en&LC=en&OS=4063&product=3752459&sw_lang=

  17 run the download to reinstall the printer

• HP Officejet Pro 8000 Wireless does not Hotmail with HP print e print app

  I am able to add gmail as an email to print wireless but when I try to add my hotmail accountI get an errorHostname of audit is filled as pop3.live.com and port is 995 he refuses checked withssl. and without her it just loops and loops on and checking account. Why used hotmail working?

  Thank you! I have to set the wireless device. Right? Also defined as hotmail acct?
  Thank you