OFFICEJET PRO L7480 fails on rebott

Similar Questions

• OfficeJet Pro L7590 fails to install as a network under Windows 7 64-bit device

  I install the full feature software and driver for my Officejet Pro L7590.  I am running Windows 7 64 bit.  The printer is connected by ethernet through my network.  When I get to the step to add the printer as a device, I select it's a wire to it with an Ethernet network connection.  It is my printer and it's thanks to a wired connection.  He then began running diagnostics that appear successful.  It starts to install and is about 50% and fails with no explanation.  My choices are again (which produces the same result) or continuous (just out).

  I rebooted several times, turned the printer off and then under tension, but nothing seems to help.

  I can navigate to the administration page web printer and it seems fine.  I also have other computers on my network that do not have a problem, but they only use the base, not the full features software print driver.

  Have solved it with the HP chat service.  Try to add the device from the shortcut that was installed from the first unknown failure has not worked.  Had to use the full software download and add the device from there.  He acknowledged some conflict that he was able to fix.

• HP Officejet Pro 6830: HP Officejet Pro 6830 fails to print color

  My HP Officejet Pro 6830 stopped printing in color.  All cartridges are new HP cartridges.  I took all those out and reinstalled them but even that prints black.  I have done a clean print head and alignment but still only prints black.  I went online and downloaded all of the software for this printer and still only black print.  Any ideas how to solve this problem?

  I have another 3 months on my warranty.

  I called HP Printer Support nd everything I had to do was go through all 3 levels of print head cleaning.  Now my HP Officejet Pro 6830 print in all colors.

• OfficeJet pro l7480 ink new cartridge does not work

  Hello world

  the magenta cartridge from my all-in-one closed his ink, or so it seemed. Even though I replaced this cartridge (shaking he seems to have a lot of ink inside) with a new one, the officejet still tells me to replace the magenta cartridge because it is empty and the printer cannot print. I have always used hp original cartridges.

  I'm looking for advice to solve the problem.

  Thank you very much.

  Max

  Hi Max, thanks for getting back to me.

  It is strange that the inks are behaving this way.  If you have already tried new cartridges, the best recommendation I can do would be to contact HP directly. You can use this Web site for information about how to contact HP properly, based on your region: Contact HP worldwide.

  Thanks for posting on the HP Forums.

• HP officejet pro 8100 fails wake up when standby mode

  Hello

  I have a 8100 OfficePro wired to the domestic network of mp.  The printer is on 24/7. most of the time.  When it is idle, it remains on as it should be, but fails to print from a laptop wireless connected to the same system.  I have to turn off and on until I can print.  This happens with other wireless systems as well as I have on the same system...   As soon as I turned it off and on again everything connects and prints well.

  Richard

  In the printer, check that "Auto Off" is disabled.  Set a static IP address in the printer out of the router's DHCP range.  Use a channel 1, 6 or 11, never 'auto' fixed wireless, try all three.  Set the router to 20 Mhz only or 145Mbps router function.  Always use WPA2-AES encryption.  Power at the same time.  Power on router wait 3 minutes.  Marketing the printer and check that it reconnects to the router.  Try now.

• OfficeJet Pro 8610: driver installation fails with an error on hpvyt13.inf persistent 1627

  The printer driver installation fails with:

  Setup error

  Call to DrierPackageINstall returned error 1627 for package
  "C:\Program HP HP Officejet Pro 8610\DriverStore\Yeti\hpvyt13.inf"

  Tried to install base drivers and a full suite as a user and administrator. Also tried a clean boot (close unnecessary services and restart). I went to look for the file in question, but it does not appear to exist (there is no HP directory in Program Files).

  Hello

  This can happen for several reasons, most common duration to a problem with the registry permissions.

  I would suggest trying the following tool, it is a 3rd party utility that analyze and repair registry permissions, and so you can use it at your own risk (I used it several times without any problems):

  http://www.MajorGeeks.com/mg/getMirror/tweaking_com_reset_registry_permissions, 1.html

  Click the Start button and let a few minutes (it may take some time, about 5-10 minutes), the journal stated: "" once it ends.

  Then try to reinstall the HP software and check for the difference.

  If the same continues I suggest contacting HP sopport to continue such troubleshooting.

  You can find the detais contact for your region below:

  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

  Hope that helps,

  Shlomi

• HP Officejet Pro 6230: validation failed to print on printer HP Officejet Pro x 64 series

  Why I get the message"Validation of the printer failure '? It worked very well, but as soon as my warranty expired, my printer isin can't work, not AT ALL.

  I bought the new ink through the HP online store and it is unusable because of this problem of 'Validation '.

  Can someone help me please?

  HP Officejet Pro 6230 x Series

  Service ID: 25077

  Serial number: [personal information]

  Firmware version: AGP1FN1423AR

  Hi @lowpro50,

  I would uninstall all the software for the printer. Here is a document of support for reference, if needed - uninstalling the software of the printer (Windows).

  Try using the HP printer installation wizard to install the software. This tool with to find the most recent version of the printer software and help with the installation.

  If it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

• Failed to get printer email address on Officejet Pro 8500 a A910a

  Hi HP Support!

  I would like to know how I can get the e-mail address of my printer? My printer model is HP Officejet Pro 8500 A910a. Here's my current installation of the printer:

  1. I've already updated its firmware to include the eprint service.
  2. My printer is already connected to the internet via the wireless network connection.
  3. I am able to print documents using the wireless printing functionality.

  Everything is already OK, except that I can't use the print feature Email Address. Whenever I click the button, it says 'the printer could not connect to the server' (note that I have already activated my Web Services printer). He also says that I need a parameter to connect to the printer of proxy server.

  That's my problem. I already looked for my proxy and there is none. I tried to watch using my Firefox browser and the browser I.E via internet options. I even googled 'what is my proxy setting' and the result says 'no proxy server detected' just my IP address.

  Please help me with this. Thank you!

  Hello

  The steps below a usually resolve the problem you are experiencing:
  
  1. unplug the power cord at the back of the printer.
  
  2. unplug the power cord at the back of your router (and the modem, if they are separated from the router).
  
  3. wait 20 seconds, then plug the router (and the modem, if necessary) in.
  
  4. wait for 30 seconds, then plug the printer back and power.
  
  5. press the button on the front of the printer ePrint, and it should try to connect to Web Services again.
  
  These steps usually fix the problem, but if it persists, you can try definition of network information static for the printer (which is sometimes useful to stabilize the ability of the printer to get outside of your network to the internet):
  
  1. tap the wireless at the top of the screen of the printer and note the IP address.
   
  2. Enter the IP address in the address bar of a web browser on a computer and press on enter or click the go button browser.
   
  3. the printer status page must be open.  Click network in the upper part.
   
  4. click on networking on the left.
   
  5. Select the Proxy settings.
  Note: If you are prompted for a redirect, click OK.  If you receive a certificate warning, select the option that allows you to continue anyway.
  If you receive an internal system error, refresh the page until it loads the proxy settings.
   
  6. check that all fields are empty.  If they are not, make them disappear and make sure that the Proxy Server requires authentication is unchecked and click on apply.  You should get a success message.
   
  7. click on the network address (IP) on the left.
  Note: If you only configuring IP address and DNS address with a yellow note Configuration, refresh the page until it loads completely.
   
  8. leave automatic IP IP address Configuration.
   
  9 change the DNS address to the manual DNS Server Configuration.
   
  10. enter manual for the manual preferred DNS Server 8.8.8.8 and 8.8.4.4 for auxiliary DNS.
   
  11. click Apply and you should get a success message.
   
  12. turn off the printer for 30 seconds and then turn it on again to force the new settings take effect.

• HP Officejet Pro e-all-in-8610: HP Officejet Pro 8610 - error Code: "0xc19a0013" (printhead missing or failed)

  I bought the printer (e-all-in-one printer HP Officejet Pro 8610) in January 2015.  The printer was working properly - fax, copy and scan, until two days ago.  Now, it doesn't print at all.  Received an error code: "0xc19a0013" (missing or does not have the print head).  An expanded version of the error code reads: "the print head seems to be missing, not detected, or incorrectly installed.  Error: 0xc19a0013.   The printer uses a removable printhead, HP Ink cartridges (black) 950 and 951 (cmy).  I used the diagnosis of HP support recommendations: all software and firmware for this printer is installed. HP ink cartridges are not low or empty; remove the printhead ink cartridges and reinstall them.

  There are several steps in the recommendation of troubleshooting, but I stopped to lift the printhead.  Because of my technical inexperience, and there were too many ceveats (attention, attention, proper relocation and etc..)  with the removal of the print head which could cause problems more serious.  Then, I stopped to remove and clean the print head.  Also, used the doctor to Scan printer HP for assistance. Tool to clean the printhead does not.   What worries me most with the 0xc19a0013 error code is his explanation: the print head seems to be missing, not detected, or incorrectly installed.  I can use all the help I can get to understand what is happening with the error code that I received and the resolution of the printer malfunction.

  Contact HP technical support at the 800-474-6836 for more options.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.
  Language-country selector.

• Cyan fails from one page to another on Officejet Pro K8600

  I have an Officejet Pro K8600, installed on XP. A nearly full cyan stopped working in the middle of printing from one page to the other - tried all the patches.  No msg error - says all cartridges are full. Buy HP new cartridge, always did the same thing. I uninstalled and reinstalled this morning. First page of diagnostics showed labour cyan on the first block, broken on the second line. Then would not work again at all. Do I need a new print head? The health of the print head shows that both are OK. Thank you! Very frustrating. It's a good printer!

  The Officejet Pro K8600 has ink cartridges that are separated from the print head Assembly.  The pipes of the unit ink cartridges in the front lower left of the printer internal for the print heads.  With this type of printing mechanism, a print quality problem, for example a missing color, usually resides in the printheads of the unit.

  I'll try to run 3 levels of the print head cleaning utility in the part of the Toolbox of the software for this printer.  Thus, there is a document with steps to help solve a problem of print quality in the K8600.  The document can be accessed here.

  Let me know how it goes.

• OfficeJet pro 8620: iMac failing to connect

  Follow-up set upward on my mac pro computer laptop and everything of fine. It communicates as expected. I follow the same established procedure on my iMac, but it cannot connect.  The iMac is on the network, connects to another good printer, but not HP.  I rebooted the printer and iMac, but still no connection.  What should I do?

  Thank you

  Hello @PLC4265,

  Welcome to the Forums of HP Support!

  I understand that you are able to print one of your Mac to your HP Officejet Pro 8620 systems wireless e-all-in-one printer. However, your other iMac running Mac OS X 10.10 is not able to connect to your HP Officejet wireless. I would like to help you today with this problem of connectivity.

  Because we know that one of your systems works very well, I don't think that this problem is caused by a conflict of networking with the printer. On the contrary, it may a driver, security or networking with the iMac conflict. To isolate this problem and fix it, I'll make you check to see if your iMac and HP Officejet currently communicating on the network. Please follow the steps below.

  1. On the front panel of your Officejet tap installation (key)
  2. Select Network Configuration
  3. Select the wireless settings
  4. Select view wireless details
  5. Please take note of the SSID network name and IP address
  6. On your iMac, please check that your iMac is connected to the exact same name as your printer network SSID. Do not connect to networks of comments . Also avoid connecting them to 5 GHz connections. If you have a double router band it can broadcast the 5 GHz and 2 GHz. Printers are supported only through connections of 2 ghz . If you don't know how to check this, you may need to speak with your router manufacturer.
  7. Once you determine the SSID of your network is perfect, please open the internet browser on your iMac
  8. In the address bar of you please enter the IP address that brought you to the printer. Do not include the www.
  9. Search this site.
  10. A Web site for your printer should now open.
  • If a Web site for your printer does not open: This indicates that your printer and your computer do not communicate on the network.
  • If a Web site for your printer opens correctly: This indicates that your printer and your computer communicate on the network successfully. Don't you just iMac "sees" your printer when you run the installation program?

  Please reply to this message with the result of the opening of the site (browser EWS) printers using the printers IP address. I look forward to hear from you!

• OfficeJet Pro 8600 Plus backup device settings fails and hangs the printer with the CKP1CN1322CR firmware

  When I was with the built-in webserver (EWS) to perform a backup, I get a message saying: "Year Error Has Occurred" and the printer would just lock up and flash lights and compel me to press the power button on the printer to reset.

  I've done a few shrinking down and discovered that this happens only when the Scan-To-Email are selected to be included in the backup. I then discovered that it only happens when I have the email set to a (compressed) PDF Document Type Options.

  I was able to get the backup to succeed by changing the options of Scan - To - Email Email Type of Document to PDF instead of PDF (compressed), then the backup succeeded.

  In this case with the latest version of the firmware: CKP1CN1322CR.

  Here's my printer information page (this could make this message other users to find more easily):

  Product Name   HP Officejet Pro 8600 N911g
  Product Model Number    CN579A
  Service ID  23220
  Firmware Version    CKP1CN1322CR
  Country/Region  USA
  

  I couldn't find a place to submit a bug report, so I hope that this information gets to the right people.

  Hmm, I tried this on my 8600 more Offcieejt and can confirm the same behavior, even though I have the firmware CLP1CN1322CR.  I'll forward a link to this topic to some folks at HP who can be able to focus on this.

  Nice work tracking down the details to replicate that.

• "Scan To E-mail" configuration on HP Officejet Pro 8600 more N911g

  It's the same problem reported by several other users of this forum to which no solution has been provided.
  
  I was not successful to set up the scan e-mail option for a HP Officejet Pro 8600 more N911g bought 12 August 2012 and using CLP1CN1150CR firmware.
  
  I'm trying to do through the interface of the Web server built into the printer from an iMac running Mac OS X 10.6.8 and the 5.8.0 HP utility.  More specifically the page under 'outgoing Scan-> Scan to E-mail-> e-mail profiles.
  
  I tried 2 SMTP from different servers, each one works well to send the email from the computer: Apple iCloud mail service (formerly Mobile Me, formerly known as.) Mac) and AT & T Net messaging service.  I checked the server name, port number, and authentication login and password were all correct.
  
  When scanning to email serves as the printer, I get an error message: unable to connect to the server.  Check the address and the name of the server.
  
  During a test of the computer when configuring a profile of outgoing mail, I get an error message: the device was unable to send the test e-mail message. (EmailAccounts-timeout).
  
  When I try to configure the page under "Settings-> E-mail Alerts-> mail server" and use exactly the same values as those in the e-mail profile out above, registration and Test option fails with an error message: the device was unable to send the test e-mail message.
  
  Oddly enough, I am able to use the client to the computer with the option scan to the computer-> e-mail in PDF format or by e-mail in JPEG format.  With this option, the file is scanned and added as an attachment to an e-mail message from the Mail in Mac OS X client.  The e-mail message is sent via SMTP server even when I press the button send.
  
  All the error messages seem to indicate that the client software of electronic mail of the printer is unable to establish a connection to the SMTP server.  However, it is unclear what configuration setting is one that could be the cause of the problem.

  After further research, I noticed that there is another default possible values of port Simple Mail Transfer Protocol (SMTP):

  • Port 25 is the standard SMTP port number.
  • Port 465 is the number of SMTP over SSL, Secure SMTP (SSMTP) port.
  • Port 587 corresponds to the port number dedicated for a presentation Mail (MSA) Agent that uses a variant of SMTP, as specified in RFC 6409, which requires that clients are authorized and authenticated to use the filing of mail service.

• HP Officejet Pro 8600 Premium: OfficeJet Pro 8600 Premium - cannot use Gigabit Wireless N

  My OfficeJet Pro 8600 Premium only connect to my router using Wireless G even though my router is capable of Wireless-N. I connect 2.4 GHz, and all my other devices connect to my router using Wireless N without problem. This printer's specifications indicate that it is able to use N Wireless 2.4 GHz. How can I get the printer to connect to my router using Wireless N? Thank you!

  Reset the printer to the default network. Reset your router failing factory. Reconfigure your router back to your configuration. Now try to connect using WA2 - AES encryption to your SSID.

• OfficeJet Pro 6978 all-in-one: OfficeJet Pro 6978 / will not download drivers

  I just bought this printer Office Jet Pro 6978, All In One Printer.  It won't let me download the driver listed in the steps to implement, it fails every time.  I tried to use the CD that came with it, it gave me a message "this computer's operating system is not supported."   So this printer will not work on my 64-bit?  Or elsewhere?  My computer is a HP.  Where can I find a download driver for this printer for my operating system?  When it prints, it prints a nonsense.  % beginprolog % beginresource: file and so on with such things.  I am at a loss... Any help would be great.

  Hello

  Sorry, but the printer is not supported on Windows Vista 64-bit.

  64-bit support is only available in Windows 7 or later operating systems.

  You can find the printer specs below:

  Vista 64-bit is not supported.

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-6970-all-in-one-printer-series/8289585/model/11161264/document/c05061732/

  You must upgrade your operating system to a later version to use instead an OS 64 - bit, Windows Vista 32 - bit to insall or replace it with another printer, compatible with your operating system.

  Respect,

  Shlomi