Optical drive supports the DVD-RAM?

Similar Questions

• Need driver for the DVD-ROM in my Satellite A100-812

  Who can help me with the driver for the DVD-ROM in my notebook? It's a rug * a UJ-850 s. These days he asks that whenever you load a disc (CD or DVD) if I want it to be formatted. All that s what it does. I tried to find the driver for peut-t, but I find on the Web. Can someone help me solve this problem?
  Thank you

  Hendrik

  There is no such thing as a pilot for ODD (optical disc drive). It uses the standard Microsoft driver. Try please remove the disc from the Device Manager, then restart the laptop. After reboot the ODD will be detected and installed it again. Check please if the problem persists.

  If yes I recommend you to install the driver for DVD-RAM (DVDForm Utility). You can find it on the download page of Toshiba. I use the 3.0.9.0a version. and it works perfectly.

• Satellite L30-105 (PSL33E) Windows Vista does not see the DVD - ram UJ-850 s

  Hello

  I have a Satellite L30-105 (PSL33E) with windows Vista. Windows Vista does not recognize the DVD - ram. BIOS recognize DVD-ram. I tried to download the drivers for the DVD-ram, but they are not on the side of Toshiba.

  Who can help me to get the right driver or learn more? Problems with the carpet * a DVD-ram uj-850 s ATA device and windows Vista.

  Hello

  The CD/DVD drive needs no special drivers!
  Vista includes a Microsoft driver that works with all CURIOUS s (CD/DVD drives)

  Simply said, the Vista should recognize the drive without any problems.

  A few questions; did you get any error messages? What is the status of Device Manager? Do you see yellow exclamation points?

  There is an old way to correct a similar drive problem. It worked on XP then try it on Vista OS.
  It of necessary to update the registry entry
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  1. click on the start menu.
  2. If it is a Vista machine in the search box type regedit without quotes.
  3. look for the registry key mentioned above.
  4. in the right panel you'll see something along the lines of UpperFilter and UpperFilter you want to click on each key filter and tap on delete. Click Yes when asked to confirm if you want to delete the key.
  5. restart Windows.
  6 let me know if it works.

• Satellite L505 - installation of Windows 7 can't find driver for the DVD

  Hello

  I bought a Satellite L505 with Windows 7 home 64 bit. Now, I want to install Windows 7 Professional 64 bit. However when the installation starts he reports that it cannot find a driver for the DVD.

  Who can help

  Concerning

  P. Engels

  Hey,.

  If you do a search on Google you will find a lot of results on this error message and in general it s associated with the middle of the installation (DVD itself).

  Do you use an original disc of Microsoft Windows 7, or is it a copy to a friend?

  You should only use the Microsoft original disks with valid software.

• Sony Vaio lira is no longer the dvd ram disc, dvd drive does not show in Explorer

  Used to read all DVDs and CDs up to 3 days ago, now cannot read DVD RAM discs, does not even display in Explorer. Just bought new drives, cleaned laser, uninstalled the driver and rebooted to reinstall, followed some difficulties on this Web site, remove filter upper and lower filters in registry entries, as described here. Any help please? Windows XP SP3.

  Hello

  Were there any changes made on the computer before the show?

  I suggest you to return the item and check if it helps:

  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

  http://support.Microsoft.com/kb/321641

• P20: cannot use the DVD - RAM drive after installing a trial software

  Hi members,

  I am using Toshiba satellite P20 - 604 model - load with windows xp prof - SP2. I wasn't able to use the software from burning DVDs successfully, so I tried to install cyberlink Power2Go software (trial ver) in there and ended up with "No. DVD RAM DRIVE APPEAR" in my computer. I could see the device dvd - ram with a yellow exclamation point in Device Manager. (the drive model is MAST * A DVD-RAM UJ-811). I tried to update the driver for it, no use. No idea how to recover the original driver and make it available for use dvd - ram drive? waiting for your valuable solution.

  Thank you & best regards

  M.Kanagaraj

  Hello

  The easiest way is to use the system restore option if you have created a restore point before you have had an experience with the trial version of Power2Go. If this is not the case, check if there is a system restore point has done in recent days.

  Good bye

• Error message from device IO on the DVD ram drive

  Help someone!
  I have a Satellite S203 and recently the em * a DVD ram drive stopped recognize any kind of CD/DVD, etc.. It must much worse & worse over time with her works do not at all. I tried to change the configuration of the IDE to PIO but always without success. Help, please...

  Jelibabi

  Hello

  Sorry, but I don t know what laptop you have (xxx-S203) but I can tell you that DMA if available is standard setting for all Toshiba laptops. On this path, it is not easy to give you a correct answer, but if the reader can't read original CD or DVD I guess there is hardware malfunction and the drive needs to be replaced.

  Good bye

• HP Pavilion p78 - 1180t - driver of the need for the DVD-RAM GH80N

  My DVD drive on my HP desktop computer no longer works.  It appears as a unit under control panel, but fails to show up in Windows Explorer as a disk when a DVD is in it.

  The error message I receive is "configuration in the registry information is incomplete or damaged (code 19).»  I ran a registry fix that part of my AVG Internet Security suite, and while he fixed other errors, it has not fixed this problem.

  I couldn't find the driver on the HP support site.

  Hello:

  Please try each of the troubleshooting steps, 2, 3, 4 and 5 from the link below.  One of them should solve the problem.

  http://support.Microsoft.com/kb/314060

• Satellite R630 - second HDD recognized as optical drive in the BIOS

  I own a Toshiba R630 and recently replaced the original disc with a Crucial SSDS with improved performance. I use the old Hitachi drive in an external enclosure via eSATA trouble-free port, but this configuration requires both port eSata/USB combo and a second USB just for power, so I bought a cart of 9.5 mm to put the disc on DVD rentals.

  Today I went ahead. Physically, everything goes well (apart from the fact that I had to remove the back cover, more than 25 screws; I took the opportunity to clean the fan) but when I turned on the computer and BIOS the Hitachi drive is recognized as an optical drive!

  You can see an image here:

  After that I could get into Windows 7 (64), disk management recognizes it as a disk, but is unable to initialize. After restarting the computer, I can't get Windows anymore, because it directly goes to the recovery mode.

  Any help would be appreciated! Is it possible to do the BIOS to recognize the second disk as a hard drive?

  Carlos

  + The message was edited: faulty link has been removed.

  First I would recommend you to check the boot device order.
  No doubt the STRANGE was set first boot device and portable tries to boot from the HARD drive that is connected to the controller of the STRANGE.
  If this does not work, delete the old HDD Hitachi, reset the default BIOS and try to start once more.

  To be honest I'm not quite sure if the BIOS would support such configuration Mr. I mean not all laptops can be upgraded with a 2nd HDD and in many cases, the BIOS would bear not the HDD installed in the ODD Bay so this configuration can cause problems.

• How can I remove optical drive of the Satellite P300-156?

  Hello

  I just ordered a HD-DVD-R (Toshiba SD-L902A) for my P300-156 drive, but I don't see how I can remove my existing laptop DVD - RW drive.

  Does anyone know how this can be done without opening the case?

  Hello

  To remove the CD/DVD drive, first remove the screws of this CURIOUS.
  The screw is hidden under the keyboard.
  Therefore, you will need to remove the keyboard first.
  The keyboard is fixed with 2 screws. These screws are hidden beneath the thin plastic (door-KB)
  First, you must remove this support KB to get access to these two screws.
  After you remove the keyboard, you will find a screw that holds the ODD. Remove it and disconnecting an optical disc drive to the connector on the system board.

  But note; Be careful and all you are doing is at your own risk AND PERIL!

• The DVD-RAM firmware UJ-830

  I'm trying to find the right firmware for my DVD - RAM drive. It's UJ - 830 s and on the page drivers I find TSST and UJ - 831 that isn't in my notebook.

  Where can I find the firmware of my drive UJ-830 s

  I have problems with burning DVDs (standard 4.7 GB DVD). Device sometimes burn DVD and burn sometimes is failure. DVD media is Verbatim or similar (I never use media at low cost). And the same box (series) DVD media, some media are burned correctly and most of them end with error (7 of 10).

  Thank you

  Hello, Tommy

  As a first step, it will be interesting to know what model of laptop you have exactly.

  A similar problem has noticed one of my friends a long time ago. He bought 50 DVD box and was able to use only first 20 or 25 all the other blank media was not at all usable. I assume there is something wrong in the production.

  I recommend you buy some TDK media but monobloc. I use them for more than 6 years and never noticed any problems. I'm sure your optical disc drive is OK and you don't need no update firmware.

• How to add an optical drive and the bezel for Acer Aspire V3-572-5217

  I think to buy the V3 Aspire 572 5217 and I would like to know the process of adding an optical drive. I did some looking and well enough to assume that the majority is universal. I would like to know if the product comes with a scope or if I have to buy a. If Yes, what measures do do so that the right settings?

  Thanks for any advice.

  Hello Brian,.

  For uphill on Aspire V3-572-5217, need you the following:

  42.ML9N2.001 - ODD BEZEL

  33.ML9N2.003 - ODD SUPPORT

  Ko.0080D.014 - DVD RW 8 X SUPER-MULTI 9,0 MM TRAY GUA0N HLDS LF + HF without BEZEL M-SATA DRIVE

  (Hitachi LG data storage)

  KO.00807.016 - DVD RW 8 X SATA M-DISC 9,0 MM TRAY SUPER MULTI DRIVE UJ8E2QBAA2-B PANASONIC

  LF + HF without the PANEL (UJ-8E2)

  You can ask for quote and order these parts in your Acer store.

• supports matshita dvd - ram uj-850 s NOT recognized, Mats_run.dvd cancel installation of PowerShell

  Updates in security plague devices on my Toshiba Satellite? Matshita dvd - ram uj-850 s can notrecognize the media .  I tried to run Mats_run.dvd.exe and it cancels the installation of PowerShell and said run again later.  I checked the registry for PowerShell and he's not here.

  Updates are downloaded automatically but are installed manually. Microsoft.NET Framework 3.0 is installed.  There are 2 hard drives usb, e and h. The internal hard drive is c and the dvd drive is d.

  I downloaded PowerShell for English x 86, and it also cancels the installation.  This facility will write on e drive unless the e reader is currently offline.  It seems to me that installation should go in one of the program files. No matter what.

  I heard Japanese factories to boost productivity by having models of foremen (also known under the name of straw bosses) in the break for whacking room. MicroSoft is expected to provide a game that allows you to the storm of MicroSoft when you feel frustrated. Laugh for everyone.

  I tried the registry filter entries delete and it does not correct.

  The drive reads some DVD.  The one I use is readable on other computers and was burned at the origin of it. This drive is able to read the DVD right here.

  DVD with files on them are not read.

  I cleaned the drive with a DVD-rom cleaner.

  Audio_TS, Video_TS structure is recognized on a DVD so that the reader is able to read the DVD.  It seems to be a Windows problem.

  Combustion works very well.

  Hey, Arch.

  I suggest uninstalling the drive in Device Manager and restart the computer.

  If this does not help, you can try to uninstall all your computer disc burning software, if you have the means to reinstall, and then reinstall the drive.

  The Powershell do not install cannot be bound.

  I suggest to run a full system scan after you have updated the antivirus definitions.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Driver for Matshita DVD-RAM UJ880AS Vista does not refresh

  DVD does not, the driver updates

  Matshita DVD-RAM UJ880AS

  Toshiba Satellite A500, Windows Vista

  The DVD will be able to, but it won't play.  Device Manager says

  "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »

  the button "Check for solutions" does not solve the problem

  Tried to update the drivers, but it says I have the most up to date.

  Microsoft fix - it didn't resolve the problem, or the other.

  What's next?

  http://support.Microsoft.com/kb/982116/en-AU

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  See if the information above solves the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• Portege R500 - Bad optical drive delays the start - how to fix?

  The Portege R500 has recently begun does not start. Initially there not some time later, frequently. By chance, I discovered that if I left alone for a minute or two, he will continue to start. That and the noise coming from the optical driver, made me suspect the problem was not with the HARD drive, as I feared at first, but with the optical driver.

  I read in the thread below that other people had this problem. MrBear mentions * I pulled it out again and pushed on the Ribbon connecting the CD-ROM to make sure they were safe. Turned on again and he pulled up without problem! *

  Link: [http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=43300&tstart=0]

  Could someone clarify in what ribbons must be treated? Only those who are visible by opening the drive? Or it is necessary to open the notebook?

  Furthermore, if I booted into Windows, it stopped again, for a minute or two, while Windows is loading. With Ubuntu, there is no such problem. Perhaps Windows tries to communicate with the optical driver for some reason any.

  Tnaks for any help!
  Leonardo

  Hello!

  Is your laptop still under warranty? If so I put t understand why you try to solve the problem by yourself. Go to the nearest EPA and ask a technician for help. These guys are very useful and they have the most experience on laptop repairs.

  On the Toshiba site, you can search the nearest ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  And the problem with Windows, it is difficult to tell why Windows stops for a minute. Maybe it s a software problem so disable all programs that you start n t need in msconfig.

  Good bye