P2V di UN 2003 SP2... Windows problemi di Norma

Similar Questions

• VMware vCenter Converter Standalone 5.5.0 build-1362012 - unknown internal error trying to P2V Windows Server 2003 SP2

  I have a box of Windows Server 2003 SP2 Standard that fails to convert using vCenter Converter Standalone 5.5.0 build-1362012. After you submit the task in the wizard's GUI, I get "a general error has occurred: unknown internal error". A virtual machine is created and deleted and then a few moments later.

  Create the virtual machine

  192.168.1.201

  Completed

  Search entity by UUID

  Completed

  Search entity by UUID

  Completed

  Remote disk open read-write

  Completed

  Search entity by UUID

  Completed

  Remote disk open read-write

  Completed

  Search entity by UUID

  Completed

  Delete the entity

  SRV-cspnsn. CSPNSN.local

  Completed

  The destination is VMware ESXI version 5.5.0 build-1623387 managed by vSphere Client version 5.5.50 build-1618071. The destination data store is a 5.60 VMFS volume with block size of 4 MB, on a local SATA HDD with 923, 50GB.

  Both machines are in the same network and have no any King or firewall or ACL in switches.

  In the log file, the only error is "error"Ufa.HTTPService"] Impossible to read the application; "flow: io_obj p:0x03403f24, h:-1, < tube"\\.\pipe\vmware-converter-server-soap">, < pipe"\\.\pipe\vmware-converter-server-soap"> >, error: class Vmacore::TimeoutException (Operation timed out).

  Any help would be appreciated.

  Thanks in advance.

  Hi all

  Once the converter VMware-converter-en - 5.5.1 - 1682692 does not work, with a touch of friend uninstall the 5.5 version of Converter Standalone Client, look for the VMware converter version - 4.0.0 - 146302 and install this version to the other machine. No not that I had to be Converter, but the windows 7 Pro 64-bit.

  After this race, the Standalone Client 4.4 Converter and everything work fine.

  Now I have the P2V converted and good machine, as was the real operation!

  I thank all of you.

  Best regards

  ADAJio

• 5.1 Converter is supported by windows 2003 SP2

  is it possible to migrate p2v windows 2003 SP2 with sql with the vmware converter 5.1

  in the support list that I see only windows 2003 SP2 R2 is done meen two windows OS

  Hello

  Yes, you can. I highly recommend you use synchronization and configure the SQL service to stop (before synchronizing).

  Kind regards

  Plamen

• Customization of comments does not not on Windows 2003 SP2 64-bit

  Hello

  I have a server ESX 3.5 with Center Virtual Server 2.5 aned Labmanager 3.0.1.

  I am running 32-bit as 64-bit VM Templates.

  I created packages of Sysprep for 64-bit machines, and each of them works perfectly except for the Windows 2003 SP2 64-bit model. Where the comments customization fails. I tried everything I can think of.

  Trashed the model and built a new, recreated the Sysprep package, updated the SP. But I still get the same error.

  Here is the log file:

  "2010-01-29 00:34:58 execution of command =" C:\Program Files (x 86) \VMware\VMware "-cmd machine.id.get.

  2010-01-29 00:34:58 the command succeeded, output from the command: numnics = 1 & macaddr_0 = 00:50:56:3 has: 01:22 & bootproto_0 = static & ip_0 = 10.88.50.185 & netmask_0 = 255.255.252.0 & gateway_0 = 10.88.48.1 & dns1_0 = 10.88.48.101 & dns2_0 = 10.88.10.55 & suffix_0 = alpha.kaplaninc.com & primaryNic = 0 & computerName = Config1430VM0 & UseSysPrep = Yes & mask bits = 1 & markerid = 109719069 & reconfigToken = 233550085

  2010-01-29 00:34:58 ProductKey = F73XK-QH23X-4FR8C-M98DP-VKQ4Y

  2010-01-29 00:34:58 number of NETWORK cards = 1

  2010-01-29 00:34:58 m_primarynicindex = 0

  2010-01-29 00:34:58 current computer name = WINDOWS2003SP16, new name of the computer = Config1430VM0

  2010-01-29 00:34:58 computer name set to Config1430VM0

  2010-01-29 00:34:59 suffix = current primary DNS, new primary DNS suffix = alpha.kaplaninc.com

  2010-01-29 00:34:59 main setting suffix DNS for alpha.kaplaninc.com

  2010-01-29 00:34:59 checking if marker file C:\WINDOWS\autoconfig-109719069 exists

  2010-01-29 00:34:59 marker file does not exist

  2010-01-29 00:34:59 running command = "C:\Program Files (x 86) \VMware\VMware"-cmd 'info-get guestinfo.vsla.customizationscript '.

  29/01/2010-00:34:59 failed to execute the command, command output value: not found exitcode:1

  2010-01-29 00:34:59 running command = xcopy "sysprep\Win2k3_64'"C:\sysprep"/ S/E/Y

  2010-01-29 00:34:59 the command succeeded, output from the command: sysprep\Win2k3_64\deploy.chm

  sysprep\Win2k3_64\factory.exe

  sysprep\Win2k3_64\readme.txt

  sysprep\Win2k3_64\ref.chm

  sysprep\Win2k3_64\setupcl.exe

  sysprep\Win2k3_64\setupmgr.exe

  sysprep\Win2k3_64\sysprep.exe

  sysprep\Win2k3_64\sysprep.inf

  sysprep\Win2k3_64\wfinf_guide.doc

  9 file (s) copied

  2010-01-29 00:34:59 command = cmd /c copy "Customize - guest.exe" "C:\sysprep\i386\$OEM$" / y

  2010-01-29 00:34:59 command execution failed, result of the order: the system cannot find the path specified.

  0 file (s) copied.

  ExitCode:1

  2010-01-29 00:34:59 cannot copy utility for customizing the comments to C:\sysprep

  2010-01-29 00:34:59 error customize the guest operating system"

  Here, any help would be greatly appreciated I have a quality assurance team to test the 2003 64 bits and at the present time, they are unable to do so because they do not receive an IP address from the scope of the Labmanager.

  Thank you

  Nadine

  You are missing something:

  C:\sysprep\i386\$OEM$

  This file should be present in the directory SYSPREP on the Lab Manager, if not, then something is missing.  I believe that Lab Manager that creates during Setup, but you can do ths following

  First of all, we need to make a folder path that looks like this

  sysprep\Win2k3_64\i386\$ OEM$

  In the oem folder, make a txt file named:

  Cmdlines.txt

  Open the file and just put this in it:

  \[Commands]

  'TAG_RUN_CUSTOMIZATION_EXE '.

  This should replicate to have the correct file:

  C:\Program VMware Lab Manager\Tools\CustomizeGuest\Windows\Sysprep\Win2k3_64\i386\$OEM$\cmdlines.txt

  (Note that your way this may differ on the Lab Manager server)

  Once this is done, you will need to rebuild the sysprep packages before deploying again.

  Note, you will need to each sysprep folder path too.

  Kind regards

  EvilOne

  VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• VMware Converter error - error Windows 2003 Sp2 to 95%

  I am new to the world of the virtual machine and converted several machines without problem, but I have this error Windows 2003 Sp2 and it is very furstrating.  I use VMware vCenter Converter Standalone 4.0.1 on the computer itself on a local drive and from another machine on a network share.  Looking through the log, I found the following: "taskSpec, task taken 357 an exception in the meantime on the agent task ends." Collecting newspapers to the officer before reproducing the exception more. "Exception message: converter.agent.internal.fault.PlatformError ', but don't see anything else of interest.  I could really use some help with this one.

  Then, I would try with Converter 3.0.3

  can you put the source machine boot.ini file?

  ___________________________________

  VMX-settings- Workstation FAQ -[MOA-liveCD | http://sanbarrow.com/moa241.html]- VM-infirmary

• Essbase 9.3.1 and Windows Server 2003 SP2

  Is anyone Essbase 9.3.1 successfully under Windows Server 2003 SP2?
  
  The documentation I have mentions only SP1, but we would like to upgrade to SP2 providing that there is no problems to do.
  
  Thank you
  
  Svejk

  There is no problem running on SP2.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• How to migrate from windows 2003 to windows 2008 with all the work of GPO active directory, DNS, without problem?

  Hello...

  I have a problem with windows 2003 to windows 2008 migration. I have try several round of flyway of google and youtube, but he is still fail.
  in the first,.
  I have HP Proliant server with windows server 2003. So I restore the backup to a different server HP Proliant wih same hardware specification. I've been back up the System State and the drive C with NTBackup. After I restored on HP Proliant, that I want to migrate, the DNS server is timeout request and the client cannot join domain. I was surprised, because the backup and the material is the same, but it can work as well as the original server.
  in the second case,
  I have windows server 2003 in HP Proliant server and it works well. I'm doing a replication on this server to another windows 2003 server in an another HP Proliant and works of good replication (another user can join the domain). After, I have installed windows server 2008 to another PC and make the replication of the duplication of windows 2003. And this success to replicate, but not on the DNS (DNS query time-out).
  I have the despair to try migrating Windows 2003 and 2008 because he is still fail in DNS. Another way to migrate to Windows 2003 and 2008 with DNS, AD and GPO work?

  Hello

  The question you posted would be better suited to the TechNet forum where IT professional will deal with your question.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• I have VSS enabled on my server sp2 Windows server 2003 and out of no where the tab versions previous disappeared...

  I have VSS enabled on my server sp2 Windows server 2003 and out of no where the tab versions previous disappeared for all users when you access from anywhere.  I deactivated and reactivated the snapshots and it won't come back please advise...

  Hello ErekBye,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Windows Server 2003 and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  Best regards

  Matthew_Ha

• Print Server 2003 SP2 to Windows 2008 R2 migration

  Hello

  Currently I have a Windows 2003 SP2 print server which is maintenance of our facilities, workstations are Windows 7 (x 64).   I would like to migrate all the information of the printer (printers, queues, pilots) a newly built Windows 2008 R2.  Someone at - it a common instruction set to allow me to do this?

  Thanks in advance,

  Jim v.

  Please post in the appropriate Windows Server Technet forums:

  Technet forums - Windows Server

• Cannot install KB979909 and KB979906 for Windows 2000, Windows Server 2003 and Windows XP

  Original title: Microsoft .NET Framework 3.5 SP1 and .NET Framework 2.0 SP2 security update for Windows 2000, Windows Server 2003 and Windows XP x 86 __Microsoft .NET Framework 1.1 SP1 (KB979909) update for Windows 2000 and Windows XP (KB979906) __KB979909)

  I was warned, I got updates, I clicked on install

  he installed an and failed both

  I can't determine how to solve this problem, and the little shield that warns me still here says I need to update

  the explanation refers to the sp?

  IM unaware of what these elements affect

  See the RESPONSE message in this thread: http://social.answers.microsoft.com/Forums/en/vistawu/thread/5dc22ff1-ba9a-4a3a-9f19-49e85908c4c9 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Win Server 2003 SP2. Backup starts and see errror message "error returned while creating the volume shadow copy: 0x8004230f.»

  Win Server 2003 SP2. Backup starts and see errror message "error returned while creating the volume shadow copy: 0x8004230f.» All solutions? CPP, Volume Shadow Copy Stallion are started.

  Thank you for visiting the Microsoft answers community.

  The question you have posted is related to Windows Server and would be better suited in the MS TechNet Windows Server Forum. Please visit this link to find a community that will provide the support you want.

• Vista Home Premium SP2 installation problems

  SP2 says its installed but Windows Update shows it as an available update. When I view the system information, it still shows only installed SP1. I tried the standalone install and I got error 0 X 80070564 connection failed. SP2 shows as has been properly installed on Windows updates the history but it shows also the lack of installation after 2-3 hours to install, restart, then back to sp1. I stop all AV, Spyware, adware, Windows Defender by other items on the SP2 installation problems. I also ran system preparation and the System File Checker. I am running Vista Home Premium 32 bit on computer laptop HP DV5 Dual Core. I have not found anything on the failure error connection displayed in the standalone sp2 update.

  Hello vinniegolf, welcome.

  I would recommend trying to create a new user account with administrative privlages and you try to upgrade to SP2 from here. This will tell us if it has something to do with the internal components of your user account.
  You can create an account via START > Control Panel > users
  Let us know what happens
  
  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• In XP, SP2, Windows Embedded Standard 2009, system to see the CF 8 GB Extreme like disk sets.

  Hi all

  I'll put up an industrial PC with reader CF card on the motherboard. The system come with a card CF 8 GB, XP SP2, Windows Embedded Standard 2009 installed. I want to keep this card as the master of the copy, so I buy a SanDisk CF Extreme 8 GB in replacement card. I managed to copy the image to the new CF card and make it bootable. However when XP is running, he still see the CF card as a removable drive C:\. Where as with the original card CF, the operating system see a fixed drive C:\. It's a way I can make the SanDisk CF card as a fixed disk, as I have a problem with the installation of the software.

  Unfortunately no you can go see it as fixed disk. SanDisk sells only fixed disk via the OEM channel cards. you will need to contact one of their OEM distributors and buy a card of fixed disk mode.

• Update and download sp2 - Windows Service does not work

  original title: update and sp2 download

  tried CK for updates upgd to said sp2 windows service is not running what it means and how to fix

  Dawn,

  Suggest that you first spread malware as the cause of the problem by following these steps:

  (1) have your system scanned by the antivirus/security suite installed.
  (2) run this tool from Kaspersky: how to remove malware belonging to the family Rootkit.Win32.TDSS http://support.kaspersky.com/viruses/solutions?qid=208280684>

  If no malware has been detected, there's a Fixit on this page which will reset the Windows Update components:

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058>

  Suggest you download and Save it. Then, close all the open programs and web browsers.
  Run Microsoft Fixit50202.msi and choose its default mode.
  After that he finished the race, see if the return code is displayed again when looking for updates.

  If not, then run the Fixit once more and choose his Aggressive mode.
  Restart once it is finished and see if the return code always appears when the updates.

  IF malware is detected, then please post if it has been removed and that the specific name of what has been detected.

  Courtesy: Steve Wechsler MS - MVP

  06/19 / 1110:11: 46 pm

• Microsoft Sync Center with Windows server 2003 and Windows 7 questions.

  I have an end user who is having an interesting question, the environment is Server 2003 and Windows 7 Pro. This end user was able to use the Center to sync several months ago and had no problems, what they remember. This user also has access (authorization) to access the other users on this network share folders. Two weeks ago, they have lost this ability, and this is where it gets interesting for me.

  When I have their Sync Center activated, I see that this issue to end users. When I turn off Sync Center, all other folders (NEB, they leave too) appear more their. As soon as I re - activate sync only Center files to end-users are available again. I tried to delete the files 'offline' and I tried to go directly to other users files directly with no luck. The only thing that seems to work is to turn off Sync Center, but the user does not like that because they want their backup files. The share is created for the redirection of "My Documents" is administered through Active Directory. I have about 60 other users who do not seem to have this problem because they are the only one who has permission and must have access to other peoples records.

  Any help or advice would be greatly appreciated

  Hi Frank,.

  As you have problems in a domain environment, please post this thread in the TechNet forum for better support.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=winserverfiles