p6616f

Similar Questions

• HP Pavilion p6616f video No. output

  Plug

  HP Pavilion p6616f

  AMD Phenom II 630 x 4

  6 GB of Ram

  Motherboard: N-Alvorix-RS880-formfat (Alvorix)

  Three SATA HD (750 GB, 500 GB, 250 GB)

  On board video: ATI Radeon 4200

  Video output: DVI/VGA

  Monitors: Acer S231HL 23 "and HP 19"

  OS: win 7 64-bit HP

  All of a sudden my computer has no video output.  The computer starts, sometimes with the video but most of the time there is no video and the last few attempts there is no video.  When he's not out video takes somewhere around 5 to 15 minutes.  Then the screen displays "scramble" and I am forced to shut down with the power button.

  I bought a new card for PCI - x 16 graphics Radeon HD 5450 (TigerDirect) and has not either any video output.  Impossible to get to the BIOS to change the preference of onboard video because the screens are black.

  I thought that a discrete card would work even if there was a problem with onboard video, but same problem.  No video output of the computer.  The monitor, 'No Input Signal' message

  Cannot understand why there is no onboard video video or add it in the graphics card.

  Disconnect all USB devices and two HD storage, still no luck.

  I had to a start-up screen that gave me an opportunity to:

  "Start with windows repair" or "window to start normally.

  I chose to start windows normally.

  Once I got to the window accounts, I stop and tried expansion card.

  Since then, I have NO video at all.

  Both monitors work very well when it is connected to other computers.

  All ideas are welcome!

  OK... updated

  Finally got video on tests repeated from computer.

  selected in the start menu "start using windows repair" (or something like that) rather than "start windows normally".

  It starts in safe mode while performing "repairs trying Windows.

  Once it has completed, the computer started with video embedded on single monitor!

  tried again with two monitors attached to the onboard video, successfully!

  installed video PCIe card, set the BIOS for favorite video card... PCI-E

  installed the drivers from the CD included with card, successful!

  really have no idea what the problem was, if not a few basic Windows file that controls video that has been corrupted

• P6616F: PC will not boot after upgrading processor

  I did some research which processor is compatible with my pc. I have a HP P6616F, AMD Phenom X 4 820 2.8 Ghz currently. I bought the FX6 AMD core 3.5 GHz.

  Once installed, I turn on my pc, but see that the fan turns my screen stays on the mode 'sleep'. I have re installed my old processor and the computer works normally.

  I checked for update of the bios and there seems to be none.

  Any help to what I'm doing wrong?

  For most things, there are not many benefits beyond 4 cores. An exception would be Adobe Photoshop and some programs that can benefit as many hearts you can give high-end video editing. For the most part, a 4 core 2.8 ghz processor is going to be as good as a 6 core 2.8 ghz processor. If there is a Phenom II, which is more than say 3.2 GHz, it might be worth it just for the increased clock speed.

• Update video card (and a few other things)

  A few questions about upgrades: first of all, can I upgrade the video card in my HP Pavilion P6000 series p6616f?  Current card is ATI Radeon HD 4200. If so, can you suggest the best replacement that can handle games? I have to upgrade the power supply too? I also think it came with 6 GB ddr3 ram. Can I put that as well... and what is the maximum it will take?

  SomewatStodgy, welcome to the forum.

  SomewatStodgy wrote:
  

  A few questions about upgrades: first of all, can I upgrade the video card in my HP Pavilion P6000 series p6616f?  Current card is ATI Radeon HD 4200. If so, can you suggest the best replacement that can handle games?  Yes, you can install a discrete PCI Express x 16 video card.  I love EVGA, Sapphire, XFX and PNY in that order.  It should be not newer than the HD 6000 series.  Latest maps (HD 7000 series) require a UEFI BIOS on the motherboard works properly.  It is difficult to know which card to recommend.  You will need to check the system requirements for the games you play to find out what is recommended.

  I have to upgrade the power supply too? I also think it came with 6 GB ddr3 ram. Can I put that as well... and what is the maximum it will take?  Recent mid-level video cards require a minimum of 400W to work properly.  I normally recommend at least 500W.  I love Corsair products that will give you more choices for video cards.  I believe that the existing PSU is ATX standard.  You can measure the existing PSU and compare the measurements to the one you choose.

  Here are the Specifications of the product for the computer.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Recovery without reformatting

  "I have a"HP Pavilion p6616f desktop PC with windows 7 Professional 64-bit. I have the CD of restoration but when I boot from them, it seems he wants to format the hard drive to do the recovery. I don't want to do that. I want to reload all software without looking at my data.

  How do I do that?

  Thank you.

  You are the very welcome.

  No, unfortunately the recovery partition will do the same thing as the recovery disks.

  If you want to try and repair your current installation, you can do your own plain W7 installation media and use the repair option located on the lower left side of the Setup screen.

  You can also use the installation media to reinstall windows and if you do not format the drive, it will create a Windows.old folder and you can copy your files from this folder to the new installation of Windows, but you will still need to reinstall all the programs you want.

  The recovery partition will no longer work if you use this method to install Windows.

  Here's how...

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. The link below. You need a 4 GB flash drive to use the USB compilation method.

  http://download.CNET.com/Windows-7-USB-DVD-download-tool/3000-18513_4-10972600.html

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://forums.mydigitallife.info/threads/14709-Windows-7-Digital-River-direct-links-multiple-languages-x86-amp-x64/page60?p=470600&viewfull=1#post470600

• Emergency notification e-mail HP support. Is actually HP or spam?

  I received an email titled "Critical update from HP", in the line of the message

  is "URGENT TO HP SUPPORT NOTIFICATION".

  Below the top line is a list of computer models and serial numbers.

  Unfortunately, I see no real logos of HP in the e-mail message.

  There is a link for me to click to get an update, but I'm hesitant to

  follow through.

  My computer model is a HP Pavilion p6610f.

  Please notify.

  I received the same message is here

  NOTIFICATION OF EMERGENCY OF HP

  ******************************************************************

  Dear valued HP customer,

  HP discovered that some P66xx and S56xx and desktop HPE - 4xx
  Models built in June / July 2010 deadline have maps system
  with a slightly higher than expected failure rates. What follows
  computers can experience no video at first upward and stop responding.

  These systems include:

  Model number of product for the name
  BT470AA of HP Pavilion Elite HPE-400f desktop PC
  HP Pavilion Elite HPE-400y Desktop PC BT471AA
  HP Pavilion Elite HPE-410f Desktop PC BM424AA
  BM425AA of PC desktop, HP Pavilion Elite HPE-410y
  BT519AA of PC desktop, HP Pavilion Elite HPE-441f
  BT584AA PC desktop, HP Pavilion Elite HPE - 447c
  HP Pavilion p6610f Desktop PC BM417AA
  HP Pavilion p6616f Desktop PC BT503AA
  HP Pavilion p6617c Desktop PC BT427AA
  HP Pavilion p6620f Desktop PC BM419AA
  HP Pavilion p6622f Desktop PC BT492AA
  HP Pavilion p6633w Desktop PC BT429AA
  HP Pavilion p6636f Desktop PC BT512AA
  HP Pavilion p6640f Desktop PC BM422AA
  HP Pavilion p6653w Desktop PC BT529AA
  HP Pavilion p6654y Desktop PC BT551AA
  HP Pavilion p6674y Desktop PC BT552AA
  HP Pavilion p6677c Desktop PC BT432AA
  HP Pavilion p6687c Desktop PC BT543AA
  HP Pavilion Slimline s5660f Desktop PC BM430AA

  Based on the documents HP about your computer purchases, your
  or computers can be affected. HP is implementing a limited number
  Extend the warranty of your system.

  If you see this type of fracture, HP recommends that you
  visit:

  http://support.HP.com/us-en/document/c03199423

  This document describes the program and how it will affect you.

  HP regrets any inconvenience that this may cause you and we expect
  before help you.

  Sincerely,
  Hewlett-Packard Company

  This Notification of urgent support was sent to because you have registered with HP or Compaq as the owner of a product and
  This message is critical to your product property. Prides of HP
  itself as being focused on the customer, quality and a business
  visitors can trust and rely on, and we apologize for any
  inconvenience.

  HP is committed to respect your privacy. To learn more
  information, consult our privacy policy to
  http://www.HP.com/country/us/en/privacy.html
  or contact us at
  Mailbox of life private HP, 11445 Compaq Center Drive W., MS 040307,.
  Houston, TX 77070.

• N Alvorix-RS880-formfat (Alvorix) motherboard

  I'm having a problem with the computer restart randomly under heavy load, sometimes even a light load. I narrowed down it to a short circuit in the last two RAM DIMMS #3 or 4 or both. I would like to replace the MB with little or no change of material other than the MB.

  I can't find a link to buy a replacement for MB, an idea? Or is there an another MB that will work with the operating system and hardware I have?

  HP Pavilion p6710f

  "HP Alert" hp-helper-2012 alluded is Improvement of Service guarantee limited in North America for owners of select HP Pavilion P66xx and the S56xx and desktop HPE - 4xx models. Currently, the only model names / numbers products concerned;

  HP Pavilion Elite HPE - 400f desktop PC, BT470AA
  HP Pavilion Elite HPE - 400y desktop PC, BT471AA
  HP Pavilion Elite HPE - 410f desktop PC, BM424AA
  HP Pavilion Elite HPE - 410y desktop PC, BM425AA
  HP Pavilion Elite HPE - 441f desktop PC, BT519AA
  HP Pavilion Elite HPE - 447c desktop PC, BT584AA
  HP Pavilion p6610f, BM417AA desktop PC
  HP Pavilion p6616f Desktop PC, BT503AA
  HP Pavilion p6617c Desktop PC, BT427AA
  HP Pavilion p6620f BM419AA desktop PC
  HP Pavilion p6622f Desktop PC, BT492AA
  HP Pavilion p6633w Desktop PC, BT429AA
  HP Pavilion p6636f Desktop PC, BT512AA
  HP Pavilion p6640f Desktop PC, BM422AA
  HP Pavilion p6653w Desktop PC, BT529AA
  HP Pavilion p6654y Desktop PC, BT551AA
  HP Pavilion p6674y Desktop PC, BT552AA
  HP Pavilion p6677c Desktop PC, BT432AA
  HP Pavilion p6687c Desktop PC, BT543AA
  HP Pavilion Slimline s5660f, BM430AA desktop PC

• Printers disappear & sometimes reappear in the Panel

  Windows 7 (64 bit) HP Pavillion Desktop P6616f
  My HP 2 (Laserjet 1022, Officejet 5610) printers keep disappearing printers & faxes in my control panel. If I disconnect and reconnect the cables to the printer from the USB ports or start the computer with the USB unplugged and plug them in after booting, printers 'sometimes' reappear. I'll print a few things like a Word doc and then all of a sudden, I get a message that there are no printer and (devices and printers) Control Panel no longer has the printer icons. I KNOW THEY ARE THERE. Printers everything worked perfectly for 6 months and then all of a sudden this appear/disappear started happening.
  Drivers must be ok that everything has worked well for many months before it started and the o/s remains the same, with the exception of Windows automatic updates which are automatically installed.
  Tried to make printer sharing with my laptop which is running Vista several months ago but couldn't get it working. Don't know what parameters were affected, but the HP desktop computer where I have the current problem has always worked with printers. Thanks for the help.

  Hello

  I suggest you run the printer Troubleshooter follow the steps in the link below:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  I hope this helps.

• Printer print more slowly and with flashing RED light

  I have a HP p6616f desktop runing Windows 7 Home premium OS. Recently, the receptors afer a system restore, my Samsung ML-2510 prnter slowed donw and a flight of red warning to the pririnetr kept blinking as soon as the power is turned on on the printer. When I right click on the printer and open the prinetr properties, there is just no indication of what has been and then there were two unknown debices stood Windows 7 could not find a driver for. I ran troubleshooting printer ly repeated my PC or through MR. FIXIT at your solution Center. Each time, he tell me no problem could be found. When I ran troubleshooting configures a device, everytme, e PC tried to install a driver but did not, was his attempt to insstall an update of the driver. And the "hardware and peripheral fault reports said: problems detected: unknown device doen't have a driver." And under "Device information", it listed ID; ROOT\LEGACY_REGFILTER\0000 and the error code: 28. All other devices I connected to his PC an addition to the standard items provided by HP are: a model AC-1 microphone, an external hard drive Verbatim, a tablet of PENPalJR entry, a video camera with build - in speaker and an all-in-one Dell Photo 926 printer an addition to the Samsung ML-2510. Explains a lot, except for the two unknown devices. I know that my ATI graphics card driver is not the most, because AMD has revised its pilot of almost every month, and the manual uninstall the old version and reinstall procedures of the new pilot is so heavy. I have the try once. I HAV eno way to check if the th etwo unknown devices are related to the ATI? AMD graphic card or not. That's why I dare not Unstall them so far.

  It would be appreciated MUHC if you could help me solve these two puzzles. Thank you.

  Kam

  Hello

  Method 1 : 28 error code occurs when the printer driver is not installed. Install the printer drivers.

  http://www.Samsung.com/us/support/downloads/ml-2510

  Method 2 : check the following article.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Hope that helps.