partial black screen
have a 23 - lower right corner Pavilion is now starting to show black or dark; not enough I can't use but to prevent further damage.
Hello bd61zrj,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.
I understand that your display is dimming in a corner and you are looking for assistance. The problem you describe seems to be a physical problem, and I think it would be better if you contact HP Support for service options.
I want to thank you for display on the HP Forums. Have a great day!
Tags: HP Desktops
Similar Questions
-
Unusual problem: partially black screen on the bottom right
Hi all
I would like to know what I can do to address these problems:
I only had my Clip 4 GB zip drive for a month, and today I noticed after that him have plugged for charging for more than a day lower the right hand screen is black. The rest of the screen is fine, it's just this little corner of the screen that is like that! Partially black screen is triangular and always there.
Another problem I've noticed is that I had it charging for more than a day, I expect to be fully recharged at the time where I unplugged, yet when I watched the news system, he indicated that power was '88% '. And then, when I was checked to make sure it read "77%", then again in '88% ' after I checked it once more. WTH is happening? Why the change?
Oh, and I think that the firmware is up to date (not sure if this is relevant) because they say "Version: V01.01.20F" in the settings.
In addition, there is a third question, I believe. I tried to reset by pressing the button of power for 20-30 seconds, but for some reason any, my drive is as insensitive to this, he starts just straight up / stops due to the initial pressure - i.e. function Reset does not work.
Others that the three above, I have not noticed other unusual symptoms. I would be extremely grateful if anyone could give me any advice to solve this problem.
Edit - I just noticed that when the drive is connected, he said 100% fully charged, but as soon as I unplug the 88% said
Thank you.
I would not be concerned about battery level indicator, as the Zip Clip is infamous for having been innacurate that. Apparently better, if you want to know the exact charge: go to system info. screen (under system settings) and check the percentage of battery charge it.
Troubesome more is the screen problem. If I were you, I would try to manually reapply the latest firmware (see firmware upgrade thread sticky at the top of the forum). If that doesn't resolve the issues, I would contact the seller and/or the SanDisk for a defective/warranty drive replacement.
-
Why my partially black screen when using win7?
Hello everyone. I'm having this problem with my screen. When I start using my computer, the screen is very clear, but in a short time later, it darkens partially. I can still see what is happening, but the darkness makes it harder to see things. Can someone tell me why this is happening and how to fix. Thank you for any offer of assistance.
You can try to disable hardware acceleration in Firefox.
- Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
You will need to close and restart Firefox after enabling/disabling this setting.
You can check if there is an update for your display driver graphic card and search for hardware acceleration of related issues.
-
Display after the automatic update of firefox firefox 18.0 normal if has a totally black screen (inside the border) if the window is secondary - window on the main screen. The mouse pointer (arrow) also has a box around it when firefox on the secondary screen. The display is normal if the frame partially covers the main screen.
Environment: Lenovo 9088CTO Office 3072 usable MB installed memory
Windows XP PRO all updates.
ATI Radeon HD 2600 XT [graphics card]
IBM L200P [Monitor] (20.2 "screws, s/n 66-C5539, October 2003)
IBM L200P [Monitor] (20.2 "screws, s/n 66-G8505, April 2004)Try disabling hardware acceleration in Firefox.
- Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
- https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
-
Re: Satellite A300D-15B - BIOS update failed and now I get a black screen
I've updated my laptop to run windows 7 instead of vista some time ago and my laptop was running, but the fan seems to stop working and I found that a BIOS update can fix this on this forum. The BIOS update has stopped responding partially through and I had to shut it down. I tried to run again, but he continued to come up with an error message. The laptop was working fine, but once I turned it on the next day I found that it is only responsible to a black screen. My laptop is out of warranty, but I thought I would send it out the hope for a decent price, but she came back with a cost of mounting A £400 for a replacement motherboard and price tag. Anyone know if these types of problems can be repaired without full replacement necessary?
Thanks to advanced to someone who can help :)
Hello
You must contact an authorized in this case service provider. You should speak with the technicians because they try to reflash the ROM module where the BIOS is stored. This isn't expensive and it s worth a try! ;)
You can find a list of the ASP s here:
http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service providerBut in the worst case you need a new card of mother, but technicians must try to reflash the ROM module first
-
When I try to put the background that is not color. only, I get a black screen.
everything about the definition of the background. accept all I get is a black screen.
Hi Troy,
MSE affect the definition of the background or order so you can exclude as the cause.
When did start? If the latter, try a system restore to before it started to see if that helps. If you use Windows 7, seehttp://www.sevenforums.com/tutorials/700-system-restore.html. If you are using Vista, seehttp://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/. If you are using XP, seehttp://support.microsoft.com/kb/306084. Sometimes this simple process made the rounds and sometimes that doesn't help - but it is easy and worth if she has recently begun.
If this does not work, try to update the driver, firmware, or software for your video card and monitor by checking with the manufacturer of the computer to get the latest for your specific computer model and (your preference based on the serial number), as well as your version of Windows. Be updated via Device Manager, save the changes, reboot and see if that helps.
If this does not work, go to control panel / customization and a more basic theme or background plus standard (and other similar adjustments) try to see if you can find one that works (or partially to work). Then you will know that the question is somewhere in this configuration and it can take time to find something suitable for you.
I hope this helps.
Good luck!
Kosh
-
black screen at startup and after logging
I have this problem for a few weeks.
When I start my pc, when windows xp starts to load sometimes it appears a black screen, nothing else.But sometimes win xp load success and after I have connect it reappears, black screen.I tried to find a solution for this in google, but nothing helps, it makes me angry.She sucks can anyone help me on that I would appreciate it. Thank you!!!We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.
If you are overclocking STOP
You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.
Please follow these instructions to collect data against crashes and upload them here, to your Skydrive or a service such as Rapidshare file sharing.
http://www.SysNative.com/forums/showthread.php/68-blue-screen-of-death-%28BSOD%29-posting-instructions-Windows-8-7-amp-Vista?p=303&viewfull=1#post303
http://SysNative.com/0x8/BSOD_Windows7_Vista_v2.64_jcgriff2_.exe
To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".
The procedure:
* Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
* Zip up the contents of this folder
Please, upload to skydrive or a file sharing service and put a link to them in your next post.Go to start > search/run > cmd > msinfo32 and include it in the upload
To ensure the minidumps are enabled:
* Click Start, in the search box, type: sysdm.cpl, press ENTER.
* On the Advanced tab, click Startup and recovery... Settings button.
* Make sure that automatically restart is unchecked.
* Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
* Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.http://www.SysNative.com/forums/showthread.php/325-BSODs-but-no-dump-files
http://www.osronline.com/article.cfm?article=545
-
Although quick and concise as possible. PC under XP SP3 Pro with AMD Athelon 2.41 GHz and had two sticks of 1 GB of ram with 256 MB radeon x 1650 just to use dual monitor graphics card. A few weeks ago it started to break up during different tasks, no bsod or error message, just a black screen crash and reboot. He wouldn't even say ms recovered or give me an option to boot safe mode or anything like that, just acted like it never happened. The typical check/clean/test when discovered that even if sys properties reported two GB of info sys ram only showed 256 MB total physical. Thought it was a RAM problem, took a stick, works slowly but not crash, exchanged, even. Put two sticks in another pc, no crash and it reads 2 Go in the properties and 2 048 Mo in sys info. Took the four MB 512 out of this pc put into this one, nothing, does not start. Put the 1 GB in works slowly with no crash, but reads only 128 MB of ram in sys info, while always reading 1 GB in comp/properties...
So my question is: is this a power supply motherboard problem or power, or am I just missing something here? I wonder on BIOS or CMOS, but they have not been affected or modded and it worked. In addition, av is up-to-date with no reports of virus.
Looks like you got a BSOD but just don't see it because XP is supposed to relaunch on these failures. If your system is configured to save dump files, we can always get infromation from last bit depressed. If the sytem is not configured to save dump files, make sure and then let a few dump files accumulate so we have something to look at.
If you are forced to do so, you can certainly guess all what he could be and try things.
Please provide more information on your system.
Click Start, run and enter in the box:
Msinfo32
Click OK, and when the system info summary appears, click Edit, select all, copy and paste then return here.
For information about video drivers, expand components, click view, click on edit, select all, copy and then paste that information here.
There would be some personal information (such as the user name and the name of the system), or what seems to be only your business that you can remove the dough. Send two copy/pasta.
XP is configured to restart automatically on some system failures, you will need to disable this feature for BSOD information will remain on the screen for you to see.
Configure your system does not automatically restart on system failure (this is what he wants to do):
Right click my computer, properties, advanced, startup and recovery settings.
In the system failure section:
Put a check mark in the box "write an event to the system log.
Put a check mark in the box "send an administrative alert.
Uncheck 'automatically restart '.
In the Write debugging information section select:
Partial dump (64 KB)
Set the directory small dumpster:
%SystemRoot%\Minidump
Click OK, OK.
Restart your computer.
What is your system brand and model?
Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
Download BlueScreenView here:Unzip it and run it (BSV installs nothing) and let him complete the digitization of all of your files to dump.If you double-click on depressed, you will get information on it (including the field caused by the driver) and you should be able to spot the problem right away - especially if you see a model in landfills where Caused by field pilot is the same (beginning with this driver).Select (highlight) one or more of the most recent dump files by clicking on them and hold down the CTRL key to select multiple files. Try to select only the most recent links that relate to your problem (perhaps five or six to start dump files).Click on file, save selected items and save information from the dumps to a text file on your desktop called BSOD.txt. Open BSOD.txt with a text editor, copy the text and paste it in your next reply.Here's an example of report ASB to a single BSOD I initiated on purpose that indicates the cause of the accident as the pilot i8042prt.sys belonging to Microsoft Corporation:==================================================Dump file: Mini062110 - 01.dmpCrash time: 21/06/2010-11:51:31Bug Check String: MANUALLY_INITIATED_CRASHBug check code: 0x000000e2Parameter 1: 0x00000000Parameter 2: 0x00000000Parameter 3: 0x00000000Parameter 4: 0x00000000Caused by the driver: i8042prt.sysCaused by the address: i8042prt.sys + 27fbDescription of the file: i8042 Port driverProduct name: Microsoft® Windows® Operating SystemCompany: Microsoft CorporationFile version: 5.1.2600.5512 (xpsp.080413 - 2108)Processor: 32-bitComputer name:Full path: C:\WINDOWS\minidump\Mini062110-01.dmp==================================================Send information from 5 last memory dumps.I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!
-
Black screen before loading windows
I watched videos and all of a sudden my computer crashes. I had similar to freeze in the past and I restarted my pc, and that she would go to advanced boot settings, so I was able to start windows. This time I rebooted and the motherboard splash screen came, but before loading Windows logo appears, the screen goes all black, boot advanced settings does not appear this time. The only shot that turned out to do anything is Ctrl + Alt + Delete, which just restart the computer and the same thing happens. I can't get into my bios. I am running Windows Vista 32bit.i do not have a RAID array. Any help will be greatly appreciated and sorry for my bad English.
There are many possible methods to try to resolve the problem without using Safe Mode. However
Keep your eyes on it that sometimes get you lucky and something works partially allowing
Safe mode, and then those that can be completed and access Windows.Also use Google search. Black screens are extremely difficult to manage.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right. -
Hello everyone, having a little trouble with my laptop. It has Windows Vista Home Basic, and that's all that works well for the two years that I got it. Today, but just the screen when black after I opened it upward. I Googled it of course and a bunchg of other cases set came. But mine was a little different, as most of the people said they still had their cursor on the screen. Mine doesn't work. And also, an error window appears saying that Windows Explorer cannot be started. Tried booting in safe mode, the same except that now the cursor is there. Help?
Hello
Here is the complete, just troubleshooting tool in case you win a partial access and use safe mode.
Even if you do not have a cursor in Windows the same patches must be tempted.-----------------------
You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
on devices and UNINSTALL - REBOOT.Another method to try to get to the desktop (try in normal Windows Mode without failure)
CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
by tapping F8 as you start several times.First check this thread in case it is simple and if not to come back to this thread.
Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
That there is no information on a black screen as it is on a blue screen just adds to the
Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
Google to see the proposed repairs, whom some have worked however these cover a wide
field efforts.Here's a video of one of them.
http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1
Here's another fix
http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.phpYou have a Vista disk? You can try restoring the system to it. If you don't have the disks your
system manufacturer will sell them at low prices. Or try in safe mode if you can get there.How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.htmlYou can create a recovery disc or use someone even version (making the system restore it)
must be bootable).How to create a Vista recovery disk
http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html------------------------------------------------
These require the correct Vista discs since you can not start safe mode.
Try the Startup Repair tool-
This tells you how to access the System Recovery Options and/or with a Vista disk
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxTry recovery options Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.html-----------------------------------------------
Here are a few Google searches where many have found different solutions:
Vista black screen - check that a 1st
http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10Vista black screen Solution
http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQIVista black screen Fix
http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI-----------------------------------------------
If necessary and you can access all ordinary Windows.
You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
(if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.You can use another DVD that aren't copy protected but you you need to own
Product key.On-site upgrade
http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htmIf nothing works, you can make a repair facility that must save the data but you will need to
Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
need to know your product Code.This tells you how to access the System Recovery Options and/or a Vista DVD
http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-consoleHow to perform a repair for Vista Installation
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html---------------------------------------------------------------------------
Another method that works sometimes: at the command prompt, type of Vista startup disk:
(a line type or copy and paste one line at a time and hit enter - enter a bracket)
or "BOLD")c:
cd\
CD c:\Windows\System32\winevt (there is a space between cd and C :)
Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)
RESTART Windows
I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
XPS 15 9550 with black screen problem
Hello
I have a XPS 15 9550 UHD, 512 GB SSD and using the laptop without major problems for 3 days. Today, I tried to start in safe mode for windows and you press the F8 key at random on the departure. It has not worked and I retried the boot. I could randomly pressing keys like F5-F6-F7-F8 function, etc. But now the screen is always black, no sign of any connection Logo Dell or bios. I see that power exists on the laptop, fans run, there is on the keyboard lights up but the screen is black and there is absolutely no sign of boot.
I also press and hold the FN + start button / stop. It did not work. I tried but its not start. What could be wrong here? Remove the battery (I hope that security will not be cancelled if I open the back of the laptop) and retry the turn a good idea?
BTW I bought this laptop in the United States and return to my country Turkey. The DELL warranty is valid internationally?
Best regards
Try to press and hold the power button for about ten seconds, release and press it again. If I remember something like this happened to me recently, and I think it's how I solved it.
BTW, F8 to enter Safe Mode has been disabled in Windows 10. You can hold SHIFT while clicking on the power > restart links on the login screen or the Start Menu (on the left or right, click on the selection) and then enter in the troubleshooting section. The other option is to change BCDEdit.
EDIT: I just now experienced some strange problems on this site. From time to time if I right click on one of the posts to choose open in a separate tab, the select box (which has a number of other selections) is completely or partially black. I have never seen it before. I use the latest version of Firefox as my browser.
JohnD
-
Hi all...
If I had already installed 10 Windows on my laptop and it says so on my Microsoft account, but I had to reinstall Windows 7 for some reason any...
So I was updating my laptop so that I can get 10 Windows installed again, I got the Windows Get 10 App and was about to install Windows 10 when this happened...
After the updates were done, I restarted my laptop to see the message "your copy of Windows is not genuine" with the black screen and the Build 7601 below on the right.
I tried everything but nothing seems to work and I can't even reach Microsoft...
So here's the tool of Microsoft Diagnostic report...
Diagnostic report (1.9.0019.0):
-----------------------------------------
Given WGA-->
Validation status: invalid license
Validation code: 50Code of Validation caching: 0xc004c4a2
Windows product key: *-* - YG69F - 9M66D-PMJBM
The Windows Product Key hash: /kehptF9HHVxM5d8dUnqgcfndXw =
Windows product ID: 00426-OEM-8992662-00497
Windows product ID type: 2
Windows license Type: OEM SLP
The Windows OS version: 6.1.7601.2.00010100.1.0.001
ID: {B905B07C-F87E-4DE1-A612-F388B412956C} (1)
Admin: Yes
TestCab: 0x0
WGA Version: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Ultimate
Architecture: 0 x 00000009
Build lab: 7601.win7sp1_gdr.150722 - 0600
TTS error:
Validation of diagnosis:
Resolution state: n/aWgaER data-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002WGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files (x86)\Opera\launcher.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
Other data-->
Office details:{B905B07C-F87E-4DE1-A612-F388B412956C} 1.9.0019.0 6.1.7601.2.00010100.1.0.001 x 64 *-*-*-*-PMJBM 00426-OEM-8992662-00497 2 S-1-5-21-2833277221-3988167993-1736215243 ASUSTeK Computer Inc. K54L American Megatrends Inc.. K54L.208 20110926000000.000000 + 000FAE13E07018400FE 0809 0409 India Standard Time(GMT+05:30) 0 3 HPQOEM SLIC-MPC 109 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.1.7601.17514Name: Windows 7 Ultimate edition
Description: operating system Windows - Windows (r) 7, channel OEM_SLP
Activation ID: 7cfd4696-69a9-4af7-af36-ff3d12b6b6c8
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00426-00178-926-600497-02-1033-7601.0000-2832015
Installation ID: 001435963981725061767086630122827283479481259711183535
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: PMJBM
License status: Notification
Reason for the notification: 0xC004F200 (non-genuine).
Remaining Windows rearm count: 4
Trust time: 14:59:19 10/10/2015Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: 0xC004C4A2
Beyond: PASS
Event timestamp: 10:4:2015 22:05
WAT Activex: registered
WAT administration service: registered--> HWID data
Current Hash HWID: MAAAAAEAAQABAAEAAAABAAAABAABAAEAJJRINHSahpvm + giMQPAEbgjqFGDGrS5zActivation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0 x 20001
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC _ASUS_ Notebook
FACP _ASUS_ Notebook
DBGP _ASUS_ Notebook
HPET _ASUS_ Notebook
MCFG portable _ASUS_
Co-submission _ASUS_ Notebook
SSDT PmRef Cpu0Ist
SSDT PmRef Cpu0Ist
ASF! INTEL HCG
SLIC SLIC-MPC HPQOEMHope Microsoft can see that and Yes need help from anyone and everyone out there... Thank you...
You must reinstall the exact edition on your COA sticker:
COA certificate of authenticity:
http://www.Microsoft.com/howtotell/content.aspx?PG=COA
??
What is the certificate of authenticity for Windows?
http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity
Review:
How to: What are my options for Windows 7 reinstall media?
and
-
Hello!
While I was watching a movie from Itunes on my iphone and took a screenshot. As I looked in my album, I ended up getting a black screen. There is a desire for this?
I guess this is supposed to work this way because you don't own the rights to the film.
-
iPhone 7 more stuck on black screen with the spinning wheel
How can I fix it? I tried to reset, go into DFU mode, recover from iTunes. Nothing works. I can't use iTunes because he wants me to grant access from my iPhone is not responding. DFU mode doesn't work, the screen does not any combination of seconds I hold down the buttons to. This has happened more than an hour. Should I just wait for the battery to die? Please note that I do not live in the United States or the U.K. or anywhere with an Apple Store, I can take it to.
Thank you
Hello! I think that I may have a solution to our problem of the black screen with the circle of rotation.
I came across this post today because my iPhone all nine 7 (which I've upgraded to the latest ios) also got stuck on a black screen with the circle of rotation. I tried to update some of my apps, when suddenly the screen froze. I clicked once on the home button and the screen become black with the subsequent appearance of the circle of rotation.
I have tried everything - simultaneously press the home button and power (does not work). connected to itunes to do a restore (it won't let me not because my "find my iPhone" was turned on - but I could not turn off because my phone was insensitive).
In any case, a very useful Mr. Damon (Senior Advisor to Apple) helped me via chat to solve the problem.
Here's what I did:
1. make sure that your iPhone is disconnected from the socket or the computer.
2. hold the POWER button and the VOLUME DOWN button at the same TIME. If it works, the screen should turn off almost immediately.
3. connect your iPhone to the computer. (when I have connected to the computer, my iPhone automatically on and was ready to be reused).
The steps below are for those whose iPhones did not turn with the above steps. The following steps are designed to allow you to disable remote your 'find my iPhone', so you can do a manual restore from iTunes.
4. go to www.icloud.com.
5. click on Find iPhone
6. given that the phone is turned off already, he won't be able to find it. On the top bar, click DEVICES.
7. click on your iPhone.
8. click on "delete account".
9. go into your itunes and do a restore.
I did have to do steps 4 to 9 more, because as I said, my iPhone automatically activated after step 3.
This really worked for me. I hope this works for everyone else too! Have a great day!
-
Mac mini black screen after upgrading to sierra
Hello!
My probleme:Mac Mini end 2014 black screen to start immediately after the upgrade of Sierra.
Thanks for your help.
Kentr0n
Is there anything on the black screen (boot) at all ever?
Maybe you are looking for
-
Drivers for bus USB ThinkServer TS140 controller and SM bus controller
Please help me find the drivers for Lenovo server mentioned in the subject. LAN and graphics drivers were installed easily, but SM bus controller and bus USB controller are not yet installed and difficult to find. The model and the type of machine is
-
How to fix the date added in skydrive
The date came in January and July today. The computer date is July, too. How can I fix it?
-
Free cell game, the cards are difficult to move and currently one of the cards is stuck
Original title: Free Cell Game When I play Free Cell, which was loaded on the computer when I got it, the cards are difficult to move and currently one of the cards is stuck and I can't complete the game. Can anyone help?
-
I have windows 7 64 bit OS on my computer hp laptop now when I want to open our software to companies named bomdels show the message ' execution runtime error 7: out of memory. I really need this application runs now please help me to solve this prob
-
This occurred only during the few days and don't know why. Hoping someone here can solve this problem for me.Whenever I use the black point in curves that it washes out the picture.See you soonGerry