Patch level Oracle 11 GR 2

Similar Questions

• RMAN Tablespace Transportable between different patch level?

  Hello

  I've got question about RMAN Tablespace Transportable. Can I use this feature between databases with different patch level? To be exact, I want to pass the SCT DB with a superior version of the power supply (11.2.0.4.2) for DB with lower version of power supply (11.2.0.4.0). Endian and OS version are the same on both environments

  Please see the official documentation, which gives very detailed information about the limitations and requirements:

  https://docs.Oracle.com/CD/E18283_01/server.112/e17120/tspaces013.htm

  Patch-levels are not important, but the character sets and endian type of source and target.

  For version compatibility, please see also transportable tablespace possible with several different Oracle versions

• Where is the information on the "Patch level" of a particular version

  Hi all
  
  Where I can see what is the last "Patch level" a particular version of Tux. For example, what is the last level of Tuxedo 9.1 patch, where I can find on?. This information is public? We need an oracle contacts?
  
  Thanks in advance

  Hello

  If you try to determine what is the last level of patch available for a given version, you will need to contact Oracle customer support. I don't think that we have a site accessible to the public that provides this information.

  Kind regards
  Todd little
  Chief Architect of Oracle Tuxedo

• Database on AIX and Windows patch level

  Hi guys
  
  I have a problem and would like to have your advice.
  I currently have my DB 10.2.0.3 put us on AIX 5.3 and exact patch level is
  
  Oracle Database 10g 10.2.0.1.0
  Oracle Database 10g Release 2 Patch Set 2 10.2.0.3.0
  There are 2 products in this House of Oracle.
  
  Interim plates (3):
  
  Patch 4684209 : applied on Mon 01 June at 19:09:01 GST 2009
  Created on April 13, 2007, 00:30:43 pm PST8PDT
  Bugs fixed:
  4684209
  
  Patch 5556081 : applied on Wed Apr 15 11:13 GST 2009
  Created November 9, 2006, 22:20:50 hrs PST8PDT
  Bugs fixed:
  5556081
  
  Patch 5557962 : applied on Wed Apr 15 11:12:47 GST 2009
  Created November 9, 2006, 23:23:06 hrs PST8PDT
  Bugs fixed:
  4269423, 5557962, 5528974
  
  
  My application provider advises me that my patch on AIX level must be equivalent to the following windows patch level.
  
  "ORACLE 10.2.0.3 PATCH BUG 8 FOR MICROSOFT WINDOWS, Chapter 1. 32 BIT"; Oracle Metalink patch number is 6116131.
  
  Concerning
  Kam

  According to the Metalink notes Critical Patch Update availability for Oracle and Middleware server information for product ID 432873.1* the equivalent of the patch 6116131 for Windows is 6079591 for AIX5L.

  Nicolas.

• Patch level ACS migration: 4.1.4 Bundle 13 - > 5.1

  I'm migrating ACS 1111 devices running ACS version 4.1.4 build 13-1121 ACS ACS version 5.1 devices.

  In the migration process, it is stated that:

  "The machine of migration must be a Windows platform that is running the same version of ACS (including the fix) as the source machine.

  and with regard to the supported versions:

  "You must install the latest patch for versions of migration supported listed here. In addition, if you have another version of ACS 4.x installed, you must upgrade to one of the supported versions and install the latest patch for this version before you can migrate to ACS 5.1. »

  If I check the web associated with ACS version 4.1.4.13 download page, there are many opportunities for software to download from 4.1.4.14.1 and goes up to 4.1.4.13.20.

  How do I now which is the patch installed in my system if the ACS Web Interface only provides the information "4.1.4 build 13?

  Thank you

  If you have installed the patch, ACS web interface also displays the patch level. See the attached screenshot

• How to apply the patch in oracle 12 c

  Hello

  Is there a correct way to apply a patch in oracle 12 c.

  Database is up and running (in open mode / read, write)

  No application is connected to the database

  But it seems that his is not successful.

  [oracle@localhost 19504744] $ opatch apply

  Setup Oracle interim Patch version 12.1.0.1.10

  Copyright (c) 2015, Oracle Corporation.  All rights reserved.

  Oracle home: /home/oracle/app/oracle/product/12.1.0/dbhome_1

  Inventory Center: / home/oracle/app/oraInventory

  from: /home/oracle/app/oracle/product/12.1.0/dbhome_1/oraInst.loc

  OPatch version: 12.1.0.1.10

  YES version: 12.1.0.2.0

  Location of the log file: /home/oracle/app/oracle/product/12.1.0/dbhome_1/cfgtoollogs/opatch/19504744_Dec_07_2015_02_06_59/apply2015-12-07_02-06-59AM_1.log

  Check the environment and performing preliminary controls...

  Skip patch 19504744 list of patches to apply: this patch is not required.

  After ignoring the patches with missing components, there are no patches to apply.

  OPatch Session is complete warning.

  Location of the log file: /home/oracle/app/oracle/product/12.1.0/dbhome_1/cfgtoollogs/opatch/19504744_Dec_07_2015_02_06_59/apply2015-12-07_02-06-59AM_1.log

  
  

  cat /home/oracle/app/oracle/product/12.1.0/dbhome_1/cfgtoollogs/opatch/19504744_Dec_07_2015_02_06_59/apply2015-12-07_02-06-59AM_1.log

  [December 7, 2015 02:06:59]     OPatch invoked as follows: «apply - invPtrLoc /home/oracle/app/oracle/product/12.1.0/dbhome_1/oraInst.loc»

  [December 7, 2015 02:06:59]     Could not make central inventory using NGOUI; oracle.sysman.nextgen.utils.NextGenInventoryUtil

  [December 7, 2015 02:06:59]     YES-67077:

  Oracle home: /home/oracle/app/oracle/product/12.1.0/dbhome_1

  Inventory Center: / home/oracle/app/oraInventory

  from: /home/oracle/app/oracle/product/12.1.0/dbhome_1/oraInst.loc

  OPatch version: 12.1.0.1.10

  YES version: 12.1.0.2.0

  YES location: /home/oracle/app/oracle/product/12.1.0/dbhome_1/oui

  Location of the log file: /home/oracle/app/oracle/product/12.1.0/dbhome_1/cfgtoollogs/opatch/19504744_Dec_07_2015_02_06_59/apply2015-12-07_02-06-59AM_1.log

  [December 7, 2015 02:06:59]     History of patch file: /home/oracle/app/oracle/product/12.1.0/dbhome_1/cfgtoollogs/opatch/opatch_history.txt

  [December 7, 2015 02:07:01]     [PRRO-MEMORY-1]: after call to installInventory.getAllCompsVect (): 23 (MB)

  [December 7, 2015 02:07:01]     [PRRO-MEMORY-2]: before loading cooked a stop: 23 (MB)

  [December 7, 2015 02:07:01]     [PRRO-MEMORY-3]: after loading before loading minipatch and rawOneOffList list in a cooked off: 23 (MB)

  [December 7, 2015 02:07:01]     [PRRO-MEMORY-4]: after completing cookedOneOffs and when the inventory is loaded...: 23 (MO)

  [December 7, 2015 02:07:01]     Check the environment and performing preliminary controls...

  [December 7, 2015 02:07:01]     Checking for conflicts between the colonies...

  [December 7, 2015 02:07:01] checkConflictAmongPatchesWithDetail start-> Mon Dec 07 02:07:01 PST 2015

  [December 7, 2015 02:07:01]     Mon Dec 07 02:07:01 PST 2015

  [December 7, 2015 02:07:01]     Adapter can go list: 19504744

  [December 7, 2015 02:07:01]     Not need adapter list:

  [December 7, 2015 02:07:01]     List of self-catering maps:

  [December 7, 2015 02:07:01] checkConflictAmongPatchesWithDetail thin-> Mon Dec 07 02:07:01 PST 2015

  [December 7, 2015 02:07:01]     Intra-conflict control PASSED

  [December 7, 2015 02:07:01]     Checking whether Oracle Home has components required by tasks...

  [December 7, 2015 02:07:01]     Check if the "19504744" patch is a patch of no-op.

  [December 7, 2015 02:07:01]     Opt. comp. not in inventory OH: oracle.rdbms, 12.1.0.2.0

  [December 7, 2015 02:07:01]     [oracle.rdbms, 12.1.0.2.0]

  Skip [7 December 2015 02:07:01] patch 19504744 list of patches to apply: this patch is not required.

  [December 7, 2015 02:07:01]     CheckMissingComp: hash match, re - build SWFs

  [December 7, 2015 02:07:01]     YES-67124:

  After ignoring the patches with missing components, there are no patches to apply.

  [December 7, 2015 02:07:01]     UtilSession: N-apply is.

  [Dec 7, 2015 2:07:01 AM]     --------------------------------------------------------------------------------

  [December 7, 2015 02:07:01]     The following warnings occurred during execution of OPatch:

  ([7 December 2015 02:07:01] 1) YES-67124:

  After ignoring the patches with missing components, there are no patches to apply.

  [Dec 7, 2015 2:07:01 AM]     --------------------------------------------------------------------------------

  [December 7, 2015 02:07:01]     YES - 67008:OPatch Session is complete warning.

  [December 7, 2015 02:07:01]     Finishing UtilSession in Mon Dec 07 02:07:01 PST 2015

  [December 7, 2015 02:07:01]     Location of the log file: /home/oracle/app/oracle/product/12.1.0/dbhome_1/cfgtoollogs/opatch/19504744_Dec_07_2015_02_06_59/apply2015-12-07_02-06-59AM_1.log

  [December 7, 2015 02:07:01]     YES - 67008:OPatch Session is complete warning.

  1. not a correct way to apply the patch

  2. you must stop your database - instance. Since patch applies it would execute a re-release of links (as the binaries are access it would apply)

  Look in your current patch its not needed

  Skip [7 December 2015 02:07:01] patch 19504744 list of patches to apply: this patch is not necessary. (if you can't find the question)

  
  

  Please refer to the documentation opatch 12 c, atleast see the patch readme.txt (Please spend some time this basic thing every DBA should do - do not jump).

  
  

  Update:

  
  

  Check the environment and performing preliminary controls...

  Jump list of patches to apply 19504744 patch : this patch is not necessary.

  
  Clearly it indicating information
  

  -Pavan Kumar N

• FMW: Portal Upgrade Advisor - video part 4 patch the Oracle Home "how to install Oracle Middleware 11 g Rel 1 portal and discoverer" should specify to use previous pfrd Oracle Home

  NOTE: from 'build base Middleware of Oracle 11 g Architecture. "
  Review of the videos for "How to install Oracle 11g Rel 1 portal Middleware and discoverer?"
  Part 4 patch the Oracle home (04:57)
  https://support.Oracle.com/CSP/main/article?cmd=show & type = ATT & ID = 1118681.1:PD11G_INSTALL_PT4 & inline = 1

  The verbal and demo explanation does not use the original location/Oracle HOme of the previously
  installed for the binary PFRD base.   It probably should.

  In addition, for some steps to follow to patch binaries PFRD, I'd put it:

  Step 4.  I am guessing that the patch will establish an another sub dir Disk1 and don't want to overwright
  installation of the initial PFRD, therefore, moves the Group of hotfixes as follows.

  CD/opt/web/install/PortalUpgradeAdvisor/pfrd
  960 ls - ltr
  Group of hotfixes mkdir 961
  Group patches 962 mv p11060983_111140_LINUX.zip
  Group patches 963 cd.
  Unzip 964 *.

  RE: of course, having unpacked the group created patches another subdirectory Disk1 with his own runInstaller
  VNC gui:

  I guess, all we are doing is patching of binary files, nothing should be running.
  Maybe an environment set in same, as when we ran last the PFRD install, however.  There we / I had
  run. / set_mid_clean after making sure the files property was oracle: oracle.

  Yes, VNC gui and
  / opt/Web/Install/PortalUpgradeAdvisor/pfrd/Patchset/disk1
  . / runInstaller

  Here again, we select Install Software - is not configured
  RE: Get the message again on this screen "installs the software only. After said is finished, use
  config.sh at ORACLE bin directory to configure the working bodies of these components installed.

  Specify the installation location.  Always to
  Oracle Middleware homepage: / opt/oracle/Middleware
  and
  An Oracle home directory: as_2 # I bet it must be as_1 because that is where the initial PFRD install binary files has occurred.

  NOTE: The summary of the Installation in the video screen escape the Oracle Home is the previous specified during the initial installation. That is to say. PFRD_Binaries.   I guess I should have named that instead of taking the default as_1. At least I would have to have done that.  Well.  Maybe this story might help the next guy.

  Also

  NOTE: The Installation screen is not "from" group of patches as in the video where it says
  Install Oracle Portal, forms, reports, and discover the Group of hotfixes.
  

  Hi Charlie
  I'm a little confused by this feedback. Especially when you say that you see the option "install - do not configure. Should this option is visible only when you run the Basic 11.1.1.2 PFRD the software installer. The Group of hotfixes 11.1.1.4 has his own 'runInstaller'... and this will display what you see in the viewlet. You definitely run the installer from the directory of stage in the Group of hotfixes? (I'll do my own validation test - if I find something strange going on... I'll report.)

  I now take the following action

  1. I will put the Viewlet so it is clear that the Group of hotfixes is staged in a different place from the base 11.1.1.2 media
  2. provide that nothing must be running (because at this point, no instance of 11 g of construction has been configured)
  3. There's a "slippage" that illustrates the Middleware and Oracle Home entries in the screen "Location of Installation to specify" IE

  Middleware homepage: / u01/alca_portal/middleware
  Oracle home: PFRD_Binaries

  However, you will see that this slide for 2 seconds (which is an error) and if you miss it probably.

  Just FYI - the House of Oracle 11 g correction is in general the same procedure as patching a mid-layer House AS10g i.e

  -You set the Oracle Home base using the installation of the basic software program
  -You patch the Oracle home using the installation program of the Group of hotfixes

• Last group of patches for oracle 11 g 2 in aix

  Hai,
  What is the last group of patches for oracle 11 g 2 in aix.

  Hello

  You can download 11.2.0.2 patch group.

  Patch number * 10098816 *- family of Oracle database: patch 11.2.0.2.0 PATCH SET for ORACLE DATABASE SERVING group

  This can be downloaded from http://support.oracle.com, need a valid CSI and account number.

  See also technical note Mos:
  * 1189783.1 changes to the Oracle database sets from 11.2.0.2 *.

  http://appsdbaworkshop.blogspot.com/2011/03/Oracle-11gr2-inplace-and-out-of-place.html

  Thank you
  A H E E R X

• Patch ' 10257622: ORACLE DATA INTEGRATOR 10.1.3.6.5 ROLLUP.

  Hi all
  
  I'm ODI 10.1.3.5 & I applied a patch "10257622: ORACLE DATA INTEGRATOR 10.1.3.6.5 CUMULATIVE PATCH" upgrade to 10.1.3.6.
  
  I followed all the steps in the read me to apply the patches & now in help > topic ODI, I see as 10.1.3.6.5 instead of 10.1.3.5.
  
  All the steps that have been included in read me it that I applied with the exception of:
  
  Step 7. Copy the XML files generated by the RCC utility to your new folder ODI oracledi/lib/scripts/patches
  
  I don't know what is utility RCC. Any body know what xml files need to be copied?
  
  Step 11. Import the technology news and updates
  
  How can this be to accomplish. Read tells me that you can import it by using the synonym template insertion-implementation to date. Don't know what it is?
  
  Step 12: Import Modules of knowledge news and updates.
  
  How can this be to accomplish. According to read me looks that the correction process would have updatewd knowledge so for the new integration modules should use & let the old man without integtrating?
  
  Thank you

  I'm not sure that you are referring to technology, with ebs and then you use Oracle technology and there are a few knowledge modules that apply.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• How do I download patches for oracle bpm

  How do I download patches for oracle bpm

  Yes - you need a Customer Support identifier (CSI) valid to register - a CSI is given when you purchase a support of Oracle

  HTH
  Srini

• Difference between patch levels between two houses of oracle

  Hello
  Is it possible that I can know the difference between the patches applied to the database a database B vs.
  One way is I can do an opatch and get list patches and compare them by writing a script.
  Is there another way to do this?
  
  Thank you
  MSK

  Hello

  There is no automated method to compare the patches applied to two different OH. You must do this manually after the release of opatch. Or if you have control of the grid, then it can help you to compare the level of patch for two different Oracle_home.

  Concerning

• Cannot download "Patch 13928776: ORACLE 10G 10.2.0.4 PATCH BUG 49'"

  Hello
  
  I got the message "you don't have privileges to download software patches to Extended Support. See how the patches and works of payments of updates for more information. »
  
  However, I am the admin Oracle account of my company to support.
  
  can you please explain the message I received?
  
  Thank you.

  Purchased Extended Support? If Yes, is it associated with the CSI you use?

  -Connect to My Oracle Support (MOS)
  -Click on the link 'welcome, username '.
  -In the section Patch download access it should list your privileges
  -In addition, click on the number link to see the level of partner support CSI CSI

• Forms patch level

  Hello
  
  How can I get the forms level patch of a form, from an fmb or fmx?
  
  I thought it was something like:
  
  head APXINWKB.fmb-1000 | strings | PG
  
  but it does not work on this form.
  
  Concerning
  
  Nico

  Do you mean the form version? If Yes, use ropes or the command adident.

  $ strings - a | grep header

  adident $ Header

  See these threads/docs for more details.

  How to get the Version of the programs, files, and items needed for the Oracle Applications? [121916.1 ID]

  Versions of files
  Versions of files

  Thank you
  Hussein

• Code patch level

  Hi all

  EBS R12.1.3

  11 GR 1 material

  OL 6.5

  I apply a Patch 14242217

  I note says he has two-level code:

  How do I know what level of code we have? As far as I know, we are in 12.1.3

  Kind regards

  Hi, Jenna.

  For R12.0-online R12.AR. A (A)

  To R12.1 => . R12.AR B (B)

  For R12, 2-online R12.AR. C (C)

  Kind regards

  Kiran

• Rebuild the file system of the patch in Oracle Apps 12.2.3

  I worked on a test environment for applications Oracle 12.2.3, mainly in the field of the adoption. I encountered an error executing adoption phase = prepare and adopt phase = fs_clone.

  I have followed this issue down to missing files in the fs2 (edition patch) file system. In fact, almost everything is missing, including the APPL_TOP directory. I think I deleted the patch directory while fixing other problems encountered when executing adoption.

  Is it possible to delete the file system obsolete runtime adoption before there was a chance to populate the new file system? For example, during a session of correction your patch won't install or start-up, so you give up the file system and run adoption phase = cleanup_mode = full cleaning.

  Is it possible to rebuild the fix file system by using adoption? I thought it was a possibility, but have been unable to use adoption do that because he fails to run. Running adoption phase = prepare will fail because of missing files in the stage of publishing and adoption = actualize_all patch will fail because it cannot work if it is not in a fixed cycle.

  Thanks in advance!

  We discovered that it was. We have several test environments on our servers, and each has its own oraInventory in oraInst.loc. A change has been made to the oraInst.loc and is no longer, he pointed to the locations needed oraInventory. This caused adoption phase = fs_clone to fail because he could not find the correct houses. You can replicate this at any time by changing the phase adoption oraInst.loc and race = phase fs_clone or adoption = prepare. Once us returned to the correct oraInventory, fs_clone worked and populated the directory correctly, automatically. There is no mention of this requirement in the documentation, so we had lot to track down the problem.