Desktop Pavilion 6710f: 5V 4pin power connector plug

Similar Questions

• Pavilion 6710f: upgrade to 3.0 in desktop pavilion 6710f usb ports?

  I have a hp pavilion p6710f desktop that has 4 usb 2.0 ports on the back, & 2 front. is it possible for me to install usb 3.0 ports in whole or in part? or just add them (which would be better)? Thank you!

  You can check your power cables. PIN 4 (molex), looked like this:

  

  What I see on the page product, you will need it IF you use the USB port for equipment that consumes energy high enough. That is to say; external hard drive, smartphones.

  If you are just using the port for a mouse or keyboard, you will not need this.

• Pavilion Elite 170f: SATA power connector

  SATA power cable has three connectors.  One is connected to the HARD drive.  Other two are as in photo.  What do I need connect another SATA drive to this cable?

  

  Glad to be of assistance.

• Pavilion 550-a137c: power adapter for desktop Pavilion 550-a137c

  Hello! I need a power adapter for desktop Pavilion 550-a137c. It requires an x 64 watt, v 11 b with a special plug adaptor. Where can I get one?  Thank you!

  @Jbgss, welcome to the forum.

  Because the computer is only a year old, you should be able to do it here.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Desktop Pavilion slimline s5623w installation of card firewire but how to connect to a power source?

  First of all, I HATE THE SLIMLINE MODELS. NOT WORTH THE MONEY! got as a gift and thought, I could replace 2000 mine thinking it was cheaper because the technology is less expensive.  BIG MISTAKE!  sucks it first audio, so I had to buy branch pregnant even hear, I use the old speakers from my other computer to my mp3 player and it rocks!  then I find not modem phone fax so I buy a usb phone modem, but wishes to make all kinds of mistakes.  now I have these old camcorder videos I want to run through this program a and discovered the firewire card was too big and did not yet align.  on my fourth product now and this one fits.  Yes! but now, we must be connected to a power supply inside the computer? where is he? has a white connector with pins on it but no wires and where is the food, which is not connected to anything else?  Need help please, cannot afford to buy a new computer and it comes to the central computer of my house.  I know a lot of things apart and do their work, but these slimlines suck.  now I know why, they are thin because they have emptied the thing.  computer first for a school kid, but not someone who keeps her home running with everything I do.  So where to connect?  How can I get this thing to work, because it fits so well after all this time looking for the right hardware?  the only reason for which I installed today was because a disc is stuck in it, because the disc is made to be vertical, another error!  disks grind and get lost in there... but I would like a response to my concern at the moment... can not replace the thing and did not have my only other more... Thank you double checked okay there a power connector to the white thing with pins but to connect and what wire?

  To Associate Dean wb2001

  The firewire card is fine as I had mentioned previously.  I installed it and the computer knows it's there.  I really don't see why the name of the thing is so important.  I DON'T PLAN to buy anything else for the problem I have, and I never told him I would.  The only question was if the thing needed food and where to find it, but on mine, I found some answers to that too if I have to use this way.

  so I have thought my problem already and the card firewire is fine.

  That's just the problem with the software now.  I was going to change the thing to the other pci slot and see if anyone makes a difference, but the computer has recognized the new hardware.  This isn't something to do with the firewire card or computer.

  As your couriosity is so bad, Dean associated wb2001,

  I had bought the firewire from newegg like this card and found the profile down those who have the extra bracker for proper size.  It is manufactured by Rosewill.  went with no problem, really easy.  but these slimlines haven't ligned up very well the other slot PCI express.

  It may just be the old camcorder... What is needed right now is the driver for the thing.  an trv520 sony handycam dcr.  I don't know if there is a driver, but when you look at I found one, but still does not recognize the camcorder.  then, in windows, they said all the drivers are included in the operating system for these things, but do not automatically install it like any other.  I'll most likely find the answer by myself around the research on this topic, or I could receive a fair he made on discs, since I only have a few strips of film, but was hoping to get to again use this camcorder.  so I'll see.

  Then Associate Dean wb2001

  I don't even understand your statement!  mix you some point of what the devil, is a lottery?  MY BEHAVIOR WILL NEVER HAPPEN!  I'm still learning what I find, I just took part an out Alienware desktop computer while he was blue screening and crashing on my son, now it works like new!

  You didn't not give me a solution, I found it myself and an attitude you squirt!  I wouldn't be here to help other people with the same problems I am and if I found the answer, I would not share expected points and giving a few statements of nose snot... For the record I WAS NOT LEAPING TO BUY ANYTHING!

  I GIVE YOU THE THUMBS DOWN!   Associate Dean wb2001

  I'm not a stupid kid, I had worked with one of the first concepts of a desktop hp back in the early 80s shipped directly from California.  has shown the President of the company about what I could do with the software that has accompanied, that was enough to make them one of the first companies to use the registers of retail computer that we see now and abandon the old IBM.   Although these dinasaurs are always being used LOL.

  so I don't deserve your forest to a condescending attitude!

• Adding second DVD - Rom SATA HP Pavilion with only 2 SATA power connectors.

  Try to add a second SATA DVD Rom but do not see more SATA power connectors?  I tried to discuss with Tech, desperate!  Don't understand.  The system came with a SATA hard drive and a SATA DVD/BlueRay so both SATA power connectors are used.  I do not see another SATA power connector in the system, but there are at least 2 connectors SATA DATA more on the system board.  You can even add the old style DVD of as the connectors on the system board do not exsist for the old style DVD ROM.  What they do a converter to SATA power adapter or am I missing something?  Strange.

  If there is not a spare SATA power connection, maybe sometjhing like this would help:

  http://www.satacables.com/HTML/Molex-to-SATA-power-15-pin-ADA.html

• HDD WD20EARS to HPE 112Y - power to SATA power connectors - only P4 Molex available?

  Hi all

  I bought a new drive HARD for Western Digital (WD20EARS) and when I went to install in my HPE 112y

  I saw that the harness for my existing WD10EADS had the usual black SATA power connector (labeled P9)

  plugged in,

  still on the same spot next to my main HARD drive did not exist another SATA Black Power Connector for my new HARD drive but a great white molex 4 driver female connector P4

  I searched through the bundle of cables, Power Supplies, but I have not found another available black SATA power connector.

  So very quickly what I thought would be a simple upgrade of HARD drive stopped me in my tracks.

  So, my questions are...

  (1) can I buy an adapter's cable to power the existing WD10EADS as well as my new HDD WD20EARS?

  (2) is there a short jumper cable that allows you to convert the white Molex P4?

  (3) should I just upgrade the existing LiteOn model of block of power SUPPLY PS-5301 - 08HA / power 300 WATT?

  If so, what is a good upgrade and did so for my HPE 112y? Necessary power, 400-500-700 watts

  I have a gateway FX541S with a power of 700FB1E Delta Electronics which has 3 SATA power connectors

  that align perfectly to each of its 3 HARD drive location... Very well!

  That's why I was surprised when I saw the problem I had with my RESUME, I was expecting the same thing.

  I never thought that I would have a cable problem, after that I got my new HARD drive.

  The HP Pavilion Elite 112y has two discs, Blu - Ray and DVD as well as a Radeon HD4350 Video card and now two HDD.

  Is 300 watts enough, even though both of my HARD drives WD Green drives are.

  Unlike my front door where security HARD drive in place with a lever and blade in the front or side according to the case law can be too LOL!

  My HPE 112y has a cage for two HARD disks that screw in place... I don't have the necessary screws.

  Where can I get these very short screws to ensure my WD HARD drive?

  I tried Lowes with no luck.

  Thanks in advance for any help.

  I went simple and fast 5 minutes HDD Upgrade which I have just done to my front door, a serious project with my RESUME.

  I still love my HP, but not too friendly!

  Bud

  Hi again,

  Update.

  I went to my local computer store and got an adapter 'Y' which connects Molex 4 male pins on the computers Molex 4-pin female connector, then to a 'Y' for two SATA power connectors.

  They were kind enough to give me a bag of screws for the installation of my HARD drive in the cage.

  HDD installed in the cage, connected new red SATA cable and power cable SATA and everything has been working well since!

  Thanks again,

  Bud

• Workstation HP Z620 dual xeon: really only 1 6-pin power connector on the graphics card?

  Hello

  I have a question about the HP Z620 workstation.

  recently bought a dual xeon with 960 GTX installed on the 6-pin connector.

  as I can't find any other power to use nor on the power connector

  or nowhere on the set, I wonder how a graphics card must be powered only

  needs

  1 x 8-pin

  or

  1 x 8-pin + 6 pins

  or

  2 x 8 pin?

  I know there are some discussions about this in this forum, but I did not understand

  the solution. Some said there are adapters to go 6-pin to 8 pin (or 6pin to 2x8pin)?

  But how is that possible?

  like many, I know, 75 watts are max of the pci-e connection, 75 other watts Max for 1x6pin.

  so plug any adapter, 1x6pin for graphics cards that need much more power would be

  According to the standard / danger, right?

  and what about graphical installation double?

  would be happy if someone around could help me with this.

  best regards

  Chris

  The search box on this page by default search only this forum, and it is very convenient.  If you type "extra", you will find a lot of info.

  The Z620 has two of these 6-pin cable, and HP got creative and molded into two empty containers down to the black plastic fan holder before.  So, one is being used by you and the second is sitting there plugged and similar, it is used, but it is stored just it did nothing... the fan is powered differently.

  These extra HP 6 - pin PCIe power cables are not standard ATX... they are better.  The ATX standard is 75 watts can go up to the card out of the slot, and another 75 watts can come via the additional 6-pin cable.  HP 6-pin cable can do a bit more.

  This is the message that you want to read, and there there details that were not in any of the HP manuals that I searched through, but the answer was on the label of Z620 power supply.  12V 18A each, plus adding info on some special HP adapters that allow you to take a HP 6-pin and divided to two 6-pin connectors or cable HP 6-pin connector 8 pins.  Watch here.

  http://h30434.www3.HP.com/T5/business-PCs-workstations-and-point-of-sale-systems/HP-Z620-workstation-PCI-e-auxiliary-graphics-power/m-p/5651091#M12740

• HP Z620: Problem of auxiliary graphic workstation HP Z620 pci-e power connectors

  I want to fit my new GPU Z620 workstation card. I see that there are two auxiliary pci - e power connectors on the plastic support. I intend to use these two to put my new graphics card but I see potential problems.
  The problem is that in these two connectors pinout is not really to PCI-e spec. There are five female terminals to each 6 connector routes. The three terminals in the top row are crushed and two terminals downstairs is 12V. 6 cavity is empty in both connectors. As far as I know the PCI-e power connectors should have 12V power supplied to cavity n ° 4 and n ° 6 of cavity. What I have to manually change these two connectors pinout and move terminal 12V from cavity to cavity no.6 no.5 or there may be a few HP adapter that could solve this problem?

  connectors

  

  Only HP knows what HP has designed (and why) and as such, it cannot be assumed simply that a connector on a system is consistent with the 'standards' and not a "psudo owner" Connector (as seems to be the case with your PEG connector that is missing pin #3).

  Normally, a PEG 2 connector x 3 can provide 75W and as such, each 12V pin provides 1/3 of the power budget. This means that the HP "psydo owner" PEG connector, for lack of a better term, may not be able to supply 50W (if each ping is kept for the same current capabilities used in the standard 2 x 3 plug PEG).

  Then, this suggests the Z620 can only support a 175W graphics cards (with 75W of PCIe + 50W of each of the two 2 x 3 PEG connectors). Note that the standard allows graphics cards to 225W pulling 75W of the slot PCIe and 75W of each PEG 2 connector x 3!

  Thus, quantify this is to watch the quickspec for your Z620 and see what graphics cards are certified for use with your system. Then to know what cards are certified for your system, you can check what PEG connectors as appropriate are provided on these certified cards and also check what is their energy consumption. I would guess that all graphics cards that require more juice 175W has not been certified by HP...

  Since you say your card draws 165W, this budget of power seems OK during examination of the foregoing. So it should just be a matter of connect the two connectors of the PEG 2 x 3 and all should be well.

  However, it you want a card more powerful, purely based on the fact that a standard 2 x 4 connector PEG can power 150W using three-pin 12V, this would indicate that each pin can supply 50W. Assuming that the pins used in a conector of PEG 2 x 3 and 2 x 4 are the same, a 2 x 3 with only two pins 12V power connector could in theory provide 100W each. So you could in theory use a 275W card into the PCIe slot with your 2 psudo owner HP PEG connectors. BUT it means something to the pins themselves and that your HP power is up to the task (and can actually provide the necessary 275W power).

  And I would say that if you wanted a graphics 225W which is supported by standards, likley it would be a simple mod to the rider 12V among the pins for the vacancy that is normally used by the 3 pin (12V).  I'd be surprised if the block POWER HP of power and wiring could not handle the necessary extra 50W. But maybe it's a little too much for some who enjoy the guarantee.

  In any case, without owning a Z620, I would be comfortable in saying that you have no problem with this graphics card 165W and these exclusive hybrid psudo 2 x 3 PEG connectors as is

  (Heck, I don't got no problem with a 35W graphics card in a slot PCIe capable of 25W of my Dell T610 server that only supports the graphs via the inetgrated adapter)...

  But really, who knows why only two used HP pin 12V in their PEG connectors, maybe they used the best quality PINE and they were not sufficient for the cards, they chose to certify. Maybe save 2 cents for a less pin was a driving force... HP only knows what HP...

• HP Envy Phoenix power connectors

  Hello, I was just wondering since I don't have my HP ENVY Phoenix 810-145qe CTO desktop PC even if there will be some additional power connectors in the camera so I don't have to buy anything, I know that I need 3 to sata cables hd additional, anyone have this computer can tell me if there is & how it... Thank you...

  TAAA, welcome to the forum.

  Great choice of computer.  I have the 810-135qe Phoenix.  This is a very good for gaming.  I did it faster by adding an SSD.

  Here is the page of Product Specifications .  If you look at the section "Berries", it shows that there are 2-5, 25 "and 3 - 3.5 drive bays".  For this reason, I am sure that there are additional power connectors.  I'll check my computer when I have the time to see how many are available and report back.

• G6-2030SL: replacement power connector

  Hello world
  My problem is that my PC (G6-2030SL) does not load, but my charger works on my old Presario CQ60-103EL.
  I checked the number of spare parts for two power connectors, and they are different.
  Can I replace my with presario power connector?

  EDIT: G6-2030SL power supply connector spare parts part number: 682744-001

  Spare connector power CQ60-103EL part number: 496835-0001

  It will not fit. You must get a replacement like-kind

  http://www.eBay.com/ITM/HP-G6-2000-G7-2000-series-genuine-AC-DC-power-Jack-cable-682744-001-/121662974034?PT=LH_DefaultDomain_0&hash=item1c53ada852

  It's the CQ60 one. See how the length of the cable and the plug are different?

  http://www.eBay.com/ITM/496835-001-HP-G60-635D-Compaq-CQ60-420US-AC-DC-power-Jack-cable-harness-wire-/371341852260?PT=LH_DefaultDomain_0&hash=item5675b2fe64

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Desktop Pavilion a614n does not start

  Desktop won't start.  Power light flashes. After removing all connections, the power light is solid on.  Reconnected power light flashing motherboard connector results.  Deleted memory cards - no change.

  Any suggestions short of the trash?

  The first thing I would try is resetting PSU.  The document that the link goes to a another power troubleshooting tips as well.

  Given that the Office has 10 years and if the power supply reset does not work, then maybe it's time to consider buying a desktop replacement PC.

• Molex power connector question

  I install a PCI Express x 1 card.  I need to plug in a molex power connector 4-pin on the map.  I see connectors 4 pin power P4, P6, etc..  Can I use an any of them?

  Power card header will determine the type of card that you will use. I'm a link connectors here because your confused. Although the molex, floppy, and ATX has 4 points, all are different designs. The ATX has a different electrical outlet.

• Power connector 4-pin S5-1110 or adapter?

  I need to put a USB 3.0 in my Slimline for use with external hard drives. The cards I've seen require power connectors 4 pins old style.  The Slimline is very compact and it is difficult to see where I could put a splitter or a connector.

  Any suggestions on the source of the appropriate connector and where it plugs into the Slimline?

  Hello

  Are you sure that the PSU in the slimline is big enough to handle the USB 3.0 card?

  You could look for a cable Y SATA then a SATA Adapter 4.  Here are a few examples so do some measuring to ensure that the length according to your needs.

• Power connector at right angle for laptop HP 2230 s?

  Is it possible to get an adapter at right angles to the power connector DC for my laptop HP 2230 s?

  The connector on the DC power cable that goes into the laptop out the path to the side (a good 2.5 "), which, besides being bulky, resembles an accident waiting to happen. On my old Fujitsu, the connector was barely right angle type, it came out at all, and was not a danger to catch on anything and damage the socket or the plug. This type of connector puts also much less strain on the DC input jack, as he does not act as a lever for bit.

  I've seen at right angles to the adapters for different types of cable (you plug your cable on one end and the other goes in the computer), like this:

  

  I hope you get the idea. In any case, what I would like is an adapter for the type of connector used on my HP laptop. The type of connector seems to be pretty standard in the range, so an adapter can be used with many models of HP. In the end, I hope that HP will change cables from their power supplies for laptop to come with these types of connectors at the ends, but in the meantime, is possible to get an appropriate, either through HP or a third party adapter?

  Thanks in advance to anyone who can offer suggestions!

  http://www.bixnet.com/cntlc90.html

  I know this is an old thread... but since nobody listed everything that might work, I found this on the same site listed zetto.