Performance at startup

Similar Questions

• performance on startup and i options ' t won't save the update

  Salvation;

  I recently bought a Samsung 840 Evo SSD (to REPLACE the hard drive) and used their tool to migrate data to the SSD HARD disk image and it worked well, however, every time I boot "performance options" window opens and when I change the "Visual effects" tab it saves without problem, but when I change the virtual memory «automatically manage the pagefile size...» ", and click ok, it will not save that!

  I have a samsung mobile np350u2a so I only 4 GB of ram, as well as virtual memory is something that I would have

  I had windows 7 and ubuntu 12.04 (dual boot) hard disk but only copied the windows 7 on ssd

  I have (*) off the defragmentation, the superfetch and prefetch the planning

  However, the problem was before even I made optimizations (*)

  I tried to run the following from a CMD prompt high: "" sc config afs start = disabled ".

  He gave me

  [SC] OpenService FAILED 1060:

  The specified service does not exist as an installed service.

  I'm stuck for 4 hours find a solution, because 4 GB of RAM and no swap file is not a good deal for me, I can't just ignore it

  Thanks for any help

  Hello Francois,.

  Thank you for the quick update.

  Do you remember installing any third-party software recently?

  This problem may occur if the Pagefile.sys file is corrupted. I suggest that you rebuild the Pagefile.sys file by following that the steps provide by Frederik long button 11, 2012 in the link below.

  pagefile.sys corrupted

  Let us know the State of the question, so that we can help you further

• The disk check is always performed at startup

  The same disk check operation is wasting a lot of my time when I start my eMachines desktop computer. Is it possible to tell which device is causing the delay?

  Hi dcprice

  Thank you for visiting the website of Microsoft Windows Vista Community. In order to focus more on your particular situation, I'll split your post into a new thread.  Son of splitting are made to mitigate the confusion caused by more than one display on similar topics, which allows us to focus on each client individually.

  You can try this Registry Fix possible

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk

  Click Start
  In the start search box, type regedit , and then press the ENTER key
  Navigate to the following key
  HKEY_LOCAL_MACHINE
  SYSTEM
  CurrentControlSet
  Control
  Session manager

  ' HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager ".

  Change the BootExecute value (by double clicking) "autocheck autochk *" to "autocheck autochk/k: c" (without the "")

  If please post back and let us know if it helped to solve the problem - thank you
  Ken
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When the computer stops to install software updates, I see a white screen instead of the usual startup screens.

  I don't remember how long I've had this problem. What I've done is pushed the button on the monitor. This allows me to see the page, but does not allow me to enter data. I usually have to shut down the computer and then restart it again. What needs to be done to solve this problem?

  Richard Hayes,
  Please post with the information requested here: what to post in the Windows Update forum

  Depending on your version of Windows, you may need to perform a startup repair. System recovery options

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot start my computer. Receives the message "startup is corrupt."

  I have a dell desk top, 4 to 5 years. Message's boot is corrupted in vista, what do I do

  Hello

  ·         What is the accurate and complete error message?

  ·         You will remember to do recent changes on the computer before this problem?

  ·         Since when are you facing this problem?

  I suggest you follow the steps mentioned below:

  Method 1:

  You use last good known Configuration and check if the problem persists. Follow the steps in the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

  Method 2:

  If the previous step fails, restart the computer in safe mode and check if the problem persists. Follow the steps in the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 3:

  If the previous step fails to perform the Startup Repair. Follow the steps in the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

• laptop comes with Startup Repair tool and said then it cannot be resolved, then the laptop is blocked.

  Original title: Hi I am not a techi but my computer laptop girls arrives with the Startup Repair tool and said then it cannot be resolved, then the laptop is blocked. Help! What should I do? Be sure to talk to a techno-phobe.

  Just automatically go for boot errors and nothing more! Help

  Hi JacinthaDahl,

  1. you receive an error code or error message when you start your computer?

  2 have you made changes to your computer recently?

   
  
  I suggest you follow the methods and check if it helps.
   
   
  Method 1: Perform a startup repair, check to see if it helps.
  To run the Startup Repair tool by using the Windows Vista installation disc
   
   
  If you have the Windows Vista installation disc, follow these steps to use the Startup Repair tool:
  (a) Insert the installation disc.
   
  Note: The computer must be configured to start from a CD or a DVD. For more information on the configuration of the computer to start from a CD or a DVD, see the documentation provided with your computer.
   
  (b) restart the computer. To do this, click Start, click the arrow next to the button lock and then click on restart.
   
  Note: If you cannot restart the computer by using this method, use the power button to turn off the computer. Then, turn the computer back on.
  (c) set your preferred language and then click Next.
   
  Note: In most cases, the Startup Repair process starts automatically, and you do not have to select in the System Recovery Options menu.
   
  (d) click on repair your computer.
  (e) in the System Recovery Options dialog box, click the operating system you want to repair, and then click Next.
  (f) in the System Recovery Options menu, click Startup Repair to start the repair process.
  (g) when the repair process is complete, click Finish.
   
  Referral link: http://support.microsoft.com/kb/925810
   
   
  Method 2: Perform a restore of the system for the installation disc and check if it helps.
  Please follow these steps to do system restore
   
  (a) Insert the Windows Vista or Windows 7 DVD and then reboot the computer.
  (b) when you receive the following message appears, press a key: press any key to start from the CD or DVD.
  (c) set the following preferences and then click Next:
  i. the language to install.
  II. time and currency format.
  III. keyboard or input method.
   
  (d) click on repair your computer and select the operating system you want to repair, and then click Next.
  (e) click System Restore, and then click Next.
  (f) click on restore that you want to use and then click Next.
   
  Note: Click a restore point that will return the computer to a State where the connection is successful. After you use the system restore feature, reinstall all programs or updates that can be removed. You won't lose any personal documents. However, you may have to reinstall programs. You may also need to reset some personal settings.
  (g) confirm the disks that you want to restore, and then click Next.
  (h) click Finish, and then click Yes when you are prompted.
  (i) when the system restore process is complete, click on restart to restart the computer.
  
  (j) after the computer restarts, click on close to confirm that the system restore process has finished successfully.
  Referral link: http://support.microsoft.com/kb/940765
   
   
  Method 3: You can also check out the link and check if it helps.
  http://support.Microsoft.com/kb/934540

   

• Blue screen on startup. STOP: 0X0000007E

  I was confronted with the virus, this morning, and after removing all the source .exe and perform antivirus analysis, I was had BSOD.
  Now whenever I boot, I get a BSOD. I managed to prevent Windows to restart after an error, and I see this STOP error message:

  STOP: 0X0000007E (0XC0000005, 0X8B943A7E, 0X8C87EABC, 0X8C87E7B8)

  Volsnap.sys - address 8B943A7E base at 8B 913000, DateStamp 49e01f09

  EDIT: I can't start in safe mode or Windows at all. It restarts automatically once it loads the "base engines" or after charge of the progress bar.
  I don't have a Windows Vista installation CD.

  Hi Oliver Davenport,.

  1. When did you start to question?

  2. you remember to make changes to the computer priot to that question?

  3. you receive messages or error codes?

  4. what happens when you use Internet Explorer?

  Method 1: Remove no matter what external device connected with the exception of the keyboard and the mouse, and then restart the computer.

  Method 2: You can try to perform a startup repair and check for the issue.

  For more information, see the link:

  What are the system recovery options in Windows Vista?

  Method 3:

  Alternatively, you can try to run a Checkdsk by using Windows vista installation and check.

  Check your hard drive for errors

  Note: When you run the disk check, there are chances of losing data if you can take a backup before starting the checkdisk

  a. Insert the installation disc.

  b. restart your computer.

  c. click on the Start button, click the arrow next to the button lock and then click on restart. If you are prompted, press any key to start Windows from the installation disc.

  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings.

  d. choose your language settings, and then click Next.

  e. in the System Recovery Options menu, click command prompt

  f. at a command prompt, type the following command and press ENTER

  Chkdsk /f /r X: (drive letter)

  Note: When you run the checkdisk, there are risks of data loss you can take a backup before starting the checkdisk.

  g. press y when you are prompted to check the drive the next time the system restarts.

  h. close all applications and restart the computer.

  Note: If the result of the scan is unrecoverable errors, then the hard disk is damaged or corrupted.

  Hope this information is useful.

• Pressing ESC during Windows Vista startup

  My mother is Windows Vista on a HP touch screen desktop computer. She hit by mistake ESC during the Windows startup process and now the computer does not start correctly. She gets either a blue or black screen, it ask to boot from another location. She tried to shut down the computer, leave it alone for a bit and then restarted, but it always returns to the same choice of screen. What she described to me, she is not in a prompt screen BACK, but she can't select C; score from upward. Any help or advice are appreciated.

  Hi Eagle 6.

  I suggest to perform a startup repair and check if that helps:

  Startup Repair: frequently asked questions

  I hope this helps.

• How can I load and launch my app (.cod) at Simulator startup?

  I wonder what is the solution to load and launch my app (.cod) at Simulator startup?

  I found that I can load the cod file by using the command FledgeController and LoadCod, but I do not see the low method to load the installed application?

  Can you please provide guidelines for automatic start of installed applications?

  You can set your application to automotive performance at startup in Eclipse.  To do so, open the BlackBerry_App_Descriptor in your project and check "auto-run at startup.

  There is no support in fledgecontroller for the launch of an application by name.

• Computer freezing and startup repair does not solve the problem.

  fix my computer when windows start dump then launch startup, but does not solve the problem. Can you help me solve the problem

  Hi Wwiese,

  Thanks for posting your query in Microsoft Community.

  I understand from the description of the problem, the computer freezes in the commissioning on the Windows 7 computer.

  I would appreciate if you can help me with the following information.

  1 were there any hardware or software changes made on the computer before this problem?

  2. are you able to boot into office?

  3. you receive an error message/code?

  I suggest you try these methods and check if it helps.

  Method 1

  Disconnect all external devices (printers, scanner, USB (universal serial bus) drives, etc...) Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue. Then download drivers software updated for this particular device.

  Method 2

  Try to start in last good known Configuration and see if you can start very well.

  Using the last good known Configuration

  http://Windows.Microsoft.com/is-is/Windows7/using-last-known-good-configuration

  Method 3

  Start the computer in safe mode and check if the problem persists, if the question does not persist then perform the clean boot and check if the problem resolves.

  Step 1

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed. Please click the below mentioned link.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2

  Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  http://support.Microsoft.com/kb/929135

  Note: After completing the steps in the clean boot troubleshooting, follow step 3 from the link to start the computer to a Normal startupmode.

  Method 4

  If the problem persists, I suggest you perform a startup repair and check if it makes a difference.

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  In addition, you can do a System Restore the Windows Recovery Console.

  It will be useful.

  Let us know if you encounter problems with Windows in the future. We will be happy to help you.

• Does anyone else have an iMac that starts typing on its own?

  I try to type a password and the computer just starts typing, indefinitely. I'll write an email and the computer hits back again and again and again. Then it starts to beep me - the beep that says: "has already hit this key! I have no control over what he types. My only recourse is to restart, which works most of the time. Until yesterday.

  This goes on 5 months patiently trying a bunch of solutions, none worked. Of course, it produced intermittently, making it much more difficult.  However I called and talked to a counselor while he was hoping it would help. Nope.

  I went through 5-6 people from Apple for probably 7 + hours on the phone. Finally, they said make a genius bar appt and bring it in. Yes, I did. The whole darn 27 "thing. They gave me a new keyboard to try. Nope. They suggested I have reinstall the latest system. Yes, I did. Nope.

  I'm getting pretty well supplied upward.

  I will say, in all the conversations I've had, I'm pinned a rude woman. Each representative was pleasant and everyone has, according to me, tried very hard to make it work.

  Unfortunately the last woman I spoke with, a Counsellor who gave me his phone number and extension, did not return either my emails, nor my phone messages.

  So I'm screwed out of. When he arrives, of course, I can't use my machine $2000 +. Fortunately, I have a laptop or I would scream bloody murder. Maybe I need to start screaming bloody murder. I want that they fix it or give me a new. 5 months is enough.

  Someone else has a computer that writes on its own? Of course, I'd advice anyone can offer.

  I've had this happen a couple of weeks - except that it was on my end 2012, Mac Mini, on which I had just done a clean install of El Capitan.  The Mac Mini was using the Apple bluetooth - like the iMac keyboard.

  I've only had the question on the login screen - it would just start repeatedly typing in the password field.  To solve - and to see if was indeed a problem with the keyboard - I went to a wired keyboard - and the problem stopped.  This little told me it was the keyboard.  To troubleshoot further - I happened to have a spare identical keyboard - so I have the bluetooth of the iMac keyboard odd and not matched the keyboard problem of the Mac Mini.  I paired the keyboard blue tooth with the Mac Mini iMac and paired the bluetooth problem with the iMac keyboard.  I did a reset SMC, PRAM/NVRAM reset and start secure on the iMac and Mac Mini (precaution).  The problem never happened again.  I was not yet the keyboards of return - and it has been a few weeks.  If you do not have a wired keyboard or bluetooth spare parts - you could try the following:

  1 turn off your iMac keyboard pairing.

  2. join your iMac keyboard

  3 stop the iMac

  4 perform a SMC reset (iMac, you delete all the devices to the iMac - unplug the power cord at the back of the iMac.)  Wait at least 15 seconds.  Reattach the power cord to the iMac.  Wait at least 5 seconds.  Press the button.

  5. when the iMac restarts - stop it again.

  6 reset the PRAM (memory NVRAM) - by simultaneously pressing the keys CMD OPTION P and R, after hearing the boot chime.  Keep hold the keys until you hear the chime again.  Then keep hold the keys down until you hear one more chime.  Release the keys - let the iMac start.

  7 judgment of the iMac, once again.

  8. perform a startup by holding down the left SHIFT key when you hear the boot chime.  Now keep the left SHIFT key until you see the progress during the start bar.  On the login screen - it should be a message from Red starting at the top right of the screen.  Allow the iMac to sit at the display of connection for 5 minutes.  Connect to iMac - (it will be slower than normal).  Allow the iMac to sit to the desktop for about 5 minutes - do not run all the apps.  After 5 minutes - stop the iMac.

  9 start the iMac and Note If the keyboard is no longer slap on its own.

  ~ Scott

• HP ENVY 17-j102tx Leap Motion: upgradation of 8 GB of RAM

  Hello

  Finally got the exact corresponding part number that was installed in the laptop ELPIDA 8 GB 2Rx8 PC3L - 12800S - 11 - 12 - F3

  EBJ81UG8EFU0-GN-F from an international reseller online. Now everything is OK, but as not expected no increase in visible performance at startup or other with double 16 GB RAM(2 x 8GB)! I am always happy!

• Windows 7 black screen with the cursor of the mouse in normal mode and safe

  Hi all
  I hope someone can help.
  Laptop downloaded updates and after the restart will only go to a black screen with the mobile mouse cursor.
  This occurs in safe mode, normal mode.
  I tried all variations of safe mode and still the same thing happens.
  Last known configuration does not solve. (i.e. no restoration or image to enter)
  Using the vista win7 dvd upgrade or a linux dvd and screen appears as you expect his obvious system is very good.
  I tried the options on ctrl alt del, ctrl shift esc etc etc, but I cannot go into Control Panel, or a any part of the win7 GUI.
  Best I can do is access via the command-line... any thoughts on how to fix?

  Hello

  Welcome to Microsoft Windows 7 answers Forum!

  You can try the following steps and check whether the problem is resolved.

  You can disconnect all external devices except the keyboard and mouse and check if you are able to boot to the desktop and check.

  I also recommend what to do the Startup Repair. Follow these steps:

  To perform a Startup Repair follow these steps:

  1. Insert the DVD of Windows 7 and restart the computer.

  2. when we are asked to press a key to boot from the DVD, please press enter or the SPACEBAR.

  3. choose your language settings, and then click Next.

  4. click on repair your computer.

  5. Select the operating system you want to repair, and then click Next.

  6. in the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem, and if necessary, it may restart your computer, because it makes the repairs.

  Access the link below for more information on the Startup Repair:

  http://windowshelp.Microsoft.com/Windows/en-us/help/5c59f8c1-b0d1-4F1A-AF55-74f3922f3f351033.mspx

  See also:

  http://social.answers.Microsoft.com/forums/en-us/w7install/thread/ab43493b-247C-427e-BA21-4950eea279ac

  http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/24b44a01-872e-4d87-867f-ed01a3579031/ for the black screen problem

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 - error Code: 800736B 3 (impossible to install several updates)

  That's what my update log shows (partial), please notify that I still can't update for win7 sp1 all the others seem ok?

  2011-04-13 10:05:50:733 964 5 b 0 DnldMgr rules: {7971F918-A847-4430-9279-4A52D1EFE18D}-52773724-A61E-4AEC-9130-B3F5E3A896C5 update is the 'priority' regulated and can NOT download. The sequence 4971 vs AcceptRate 1051.

  2011-04-13 10:05:50:733 964 DnldMgr 5b 0 * update may not download due to regulations.

  2011-04-13 10:05:50:733 964 5 b 0 DnldMgr rules: {7971F918-A847-4430-9279-4A52D1EFE18D}-52773724-A61E-4AEC-9130-B3F5E3A896C5 update is the 'priority' regulated and can NOT download. The sequence 4971 vs AcceptRate 1051.

  2011-04-13 10:05:50:733 964 DnldMgr 5b 0 * DnldMgr: downloading new job [UpdateId = {A5C121B0-421B-41C9-BC2D-1C468206FF06}.101] *.

  2011-04-13 10:05:50:733 964 5 b 0 DnldMgr rules: {7971F918-A847-4430-9279-4A52D1EFE18D}-A5C121B0-421B-41C9-BC2D-1C468206FF06 update is the 'priority' regulated and can NOT download. The sequence 4971 vs AcceptRate 1051.

  2011-04-13 10:05:50:733 964 DnldMgr 5b 0 * update may not download due to regulations.

  2011-04-13 10:05:50:733 964 5 b 0 DnldMgr rules: {7971F918-A847-4430-9279-4A52D1EFE18D}-A5C121B0-421B-41C9-BC2D-1C468206FF06 update is the 'priority' regulated and can NOT download. The sequence 4971 vs AcceptRate 1051.

  2011-04-13 10:05:50:733 964 5 b 0 DnldMgr rules: {7971F918-A847-4430-9279-4A52D1EFE18D}-A5C121B0-421B-41C9-BC2D-1C468206FF06 update is the 'priority' regulated and can NOT download. The sequence 4971 vs AcceptRate 1051.

  2011-04-13 10:05:50:733 964 5 b 0 Agent *.

  2011-04-13 10:05:50:733 964 Agent 5b 0 * END * Agent: downloading updates [CallerId = AutomaticUpdates]

  2011-04-13 10:05:50:733 964 5 b 0 Agent *.

  2011-04-13 10:05:50:737 964 5 b 0 DnldMgr *.

  2011-04-13 10:05:50:737 964 DnldMgr 5b 0 * BEGIN * DnldMgr: downloading updates [CallerId = AutomaticUpdates]

  2011-04-13 10:05:50:737 964 5 b 0 DnldMgr *.

  2011-04-13 10:05:50:738 964 5 b 0 DnldMgr * call ID = {36ACCA49-04FF-4B6C-8E31-6DC5E808B7D7}

  2011-04-13 10:05:50:738 964 DnldMgr 5b 0 * priority = 2, Interactive = 0, owner's system = 1, proxy explicit = 0 id of session Proxy = - 1, ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}

  2011-04-13 10:05:50:738 964 DnldMgr 5b 0 * updates to download = 1

  2011-04-13 10:05:50:738 964 5 b 0 Agent * title = Windows Malicious Software Removal Tool - April 2011 (KB890830)

  2011-04-13 10:05:50:738 964 5 b 0 Agent * UpdateId = {2491B839-D819-482C-8B1E-6A23A89C0F56}.101

  2011-04-13 10:05:50:738 964 Agent 5 0 b * bundles 1 updates:

  2011-04-13 10:05:50:738 964 5 b 0 Agent * {FC2009D2-934E-45AE-9C72-C5DD9D9B5893}.101

  2011-04-13 10:05:50:808 964 5 b 0 DnldMgr * DnldMgr: updating of the regulation [Svc: {7971F918-A847-4430-9279-4A52D1EFE18D}] *.

  2011-04-13 10:05:50:808 964 DnldMgr 5b 0 * call for full rules. 0x00000000

  2011-04-13 10:05:50:865 964 DnldMgr 5b 0 * DnldMgr: downloading new job [UpdateId = {CE236AE2-D385-483B-BAF4-92DBA756B831}.102] *.

  2011-04-13 10:05:50:865 964 5 b 0 DnldMgr rules: {7971F918-A847-4430-9279-4A52D1EFE18D}-CE236AE2-D385-483B-BAF4-92DBA756B831 update is "PerUpdate" regulated and can NOT download. The 2714 sequence vs AcceptRate 0.

  2011-04-13 10:05:50:865 964 DnldMgr 5b 0 * update may not download due to regulations.

  2011-04-13 10:05:50:865 964 DnldMgr 5b 0 * DnldMgr: downloading new job [UpdateId = {C08D54A3-F858-45E9-92C2-AD8DED8CF2C6}.102] *.

  2011-04-13 10:05:50:865 964 5 b 0 DnldMgr rules: {7971F918-A847-4430-9279-4A52D1EFE18D}-C08D54A3-F858-45E9-92C2-AD8DED8CF2C6 update is "PerUpdate" regulated and can NOT download
  . The 2714 sequence vs AcceptRate 0.
  2011-04-13 10:05:50:865 964 DnldMgr 5b 0 * update may not download due to regulations.
  2011-04-13 10:05:50:866 964 DnldMgr 5b 0 * DnldMgr: downloading new job [UpdateId = {56FA39BE-7C4A-4EFD-864A-5FCDF8E2BFF7}.100] *.
  2011-04-13 10:05:50:866 964 5 b 0 DnldMgr rules: {7971F918-A847-4430-9279-4A52D1EFE18D}-56FA39BE-7C4A-4EFD-864A-5FCDF8E2BFF7 update is "PerUpdate" regulated and can NOT download
  . The 2714 sequence vs AcceptRate 0.
  2011-04-13 10:05:50:866 964 DnldMgr 5b 0 * update may not download due to regulations.
  2011-04-13 10:05:50:866 964 DnldMgr 5b 0 * DnldMgr: downloading new job [UpdateId = {6744CF84-80D7-49CC-8701-73AA4EB55857}.102] *.
  2011-04-13 10:05:50:866 964 5 b 0 DnldMgr rules: {7971F918-A847-4430-9279-4A52D1EFE18D}-6744CF84-80D7-49CC-8701-73AA4EB55857 update is "PerUpdate" regulated and can NOT download. The 2714 sequence vs AcceptRate 0.
  2011-04-13 10:05:50:866 964 DnldMgr 5b 0 * update may not download due to regulations.
  2011-04-13 10:05:50:866 964 5 b 0 DnldMgr rules: {7971F918-A847-4430-9279-4A52D1EFE18D}-CE236AE2-D385-483B-BAF4-92DBA756B831 update is "PerUpdate" regulated and can NOT download. The 2714 sequence vs AcceptRate 0.
  2011-04-13 10:05:50:866 964 5 b 0 DnldMgr rules: {7971F918-A847-4430-9279-4A52D1EFE18D}-C08D54A3-F858-45E9-92C2-AD8DED8CF2C6 update is "PerUpdate" regulated and can NOT download. The 2714 sequence vs AcceptRate 0.
  2011-04-13 10:05:50:866 964 5 b 0 DnldMgr rules: {7971F918-A847-4430-9279-4A52D1EFE18D}-56FA39BE-7C4A-4EFD-864A-5FCDF8E2BFF7 update is "PerUpdate" regulated and can NOT download. The 2714 sequence vs AcceptRate 0.
  2011-04-13 10:05:50:866 964 5 b 0 DnldMgr rules: {7971F918-A847-4430-9279-4A52D1EFE18D}-6744CF84-80D7-49CC-8701-73AA4EB55857 update is "PerUpdate" regulated and can NOT download. The 2714 sequence vs AcceptRate 0.
  2011-04-13 10:05:50:866 964 DnldMgr 5b 0 * DnldMgr: downloading new job [UpdateId = {4F8CF520-9256-4DFF-A63C-CEB3BDF52682}.100] *.
  2011-04-13 10:05:50:867 964 5 b 0 DnldMgr rules: {7971F918-A847-4430-9279-4A52D1EFE18D}-4F8CF520-9256-4DFF-A63C-CEB3BDF52682 update is "PerUpdate" regulated and can NOT download. The 2714 sequence vs AcceptRate 0.
  2011-04-13 10:05:50:867 964 DnldMgr 5b 0 * update may not download due to regulations.
  2011-04-13 10:05:50:867 964 DnldMgr 5b 0 * DnldMgr: downloading new job [UpdateId = {185DF8F7-B04E-4D0E-84B3-ECAC6A5FB39F}.100] *.
  2011-04-13 10:05:50:867 964 5 b 0 DnldMgr rules: {7971F918-A847-4430-9279-4A52D1EFE18D}-185DF8F7-B04E-4D0E-84B3-ECAC6A5FB39F update is "PerUpdate" regulated and can NOT download. The 2714 sequence vs AcceptRate 0.
  2011-04-13 10:05:50:867 964 DnldMgr 5b 0 * update may not download due to regulations.
  2011-04-13 10:05:50:867 964 DnldMgr 5b 0 * DnldMgr: downloading new job [UpdateId = {9B3E0557-1739-409A-AFE2-CE51B1CC706F}.100] *.
  2011-04-13 10:05:50:867 964 5 b 0 DnldMgr rules: {7971F918-A847-4430-9279-4A52D1EFE18D}-9B3E0557-1739-409A-AFE2-CE51B1CC706F update is "PerUpdate" regulated and can NOT download. The 2714 sequence vs AcceptRate 0.
  2011-04-13 10:05:50:867 964 DnldMgr 5b 0 * update may not download due to regulations.
  2011-04-13 10:05:50:867 964 DnldMgr 5b 0 * DnldMgr: downloading new job [UpdateId = {55BEAB2E-CFED-458C-8814-83BCB978122E}.100] *.
  2011-04-13 10:05:50:867 964 5 b 0 DnldMgr rules: {7971F918-A847-4430-9279-4A52D1EFE18D}-55BEAB2E-CFED-458C-8814-83BCB978122E update is "PerUpdate" regulated and can NOT download. The 2714 sequence vs AcceptRate 0.
  2011-04-13 10:05:50:867 964 DnldMgr 5b 0 * update may not download due to regulations.
  2011-04-13 10:05:50:867 964 5 b 0 DnldMgr rules: {7971F918-A847-4430-9279-4A52D1EFE18D}-4F8CF520-9256-4DFF-A63C-CEB3BDF52682 update is "PerUpdate" regulated and can NOT download. The 2714 sequence vs AcceptRate 0.
  2011-04-13 10:05:50:867 964 5 b 0 DnldMgr rules: {7971F918-A847-4430-9279-4A52D1EFE18D}-185DF8F7-B04E-4D0E-84B3-ECAC6A5FB39F update is "PerUpdate" regulated and can NOT download
  . The 2714 sequence vs AcceptRate 0.
  2011-04-13 10:05:50:867 964 5 b 0 DnldMgr rules: {7971F918-A847-4430-9279-4A52D1EFE18D}-9B3E0557-1739-409A-AFE2-CE51B1CC706F update is "PerUpdate" regulated and can NOT download. The 2714 sequence vs AcceptRate 0.
  2011-04-13 10:05:50:867 964 5 b 0 DnldMgr rules: {7971F918-A847-4430-9279-4A52D1EFE18D}-55BEAB2E-CFED-458C-8814-83BCB978122E update is "PerUpdate" regulated and can NOT download
  . The 2714 sequence vs AcceptRate 0.
  2011-04-13 10:05:50:868 964 DnldMgr 5b 0 * DnldMgr: downloading new job [UpdateId = {8D887FD3-2311-43E5-8F3F-E3AD3E2663EE}.103] *.
  2011-04-13 10:05:50:868 964 5 b 0 DnldMgr rules: {7971F918-A847-4430-9279-4A52D1EFE18D}-8D887FD3-2311-43E5-8F3F-E3AD3E2663EE update is the 'priority' regulated and can NOT download. The sequence 4971 vs AcceptRate 1051.
  2011-04-13 10:05:50:868 964 DnldMgr 5b 0 * update may not download due to regulations.
  2011-04-13 10:05:50:868 964 5 b 0 DnldMgr rules: {7971F918-A847-4430-9279-4A52D1EFE18D}-8D887FD3-2311-43E5-8F3F-E3AD3E2663EE update is the 'priority' regulated and can NOT download. The sequence 4971 vs AcceptRate 1051.
  2011-04-13 10:05:50:868 964 DnldMgr 5b 0 * DnldMgr: downloading new job [UpdateId = {52773724-A61E-4AEC-9130-B3F5E3A896C5}.102] *.
  2011-04-13 10:05:50:868 964 5 b 0 DnldMgr rules: {7971F918-A847-4430-9279-4A52D1EFE18D}-52773724-A61E-4AEC-9130-B3F5E3A896C5 update is the 'priority' regulated and can NOT download. The sequence 4971 vs AcceptRate 1051.
  2011-04-13 10:05:50:868 964 DnldMgr 5b 0 * update may not download due to regulations.
  2011-04-13 10:05:50:868 964 5 b 0 DnldMgr rules: {7971F918-A847-4430-9279-4A52D1EFE18D}-52773724-A61E-4AEC-9130-B3F5E3A896C5 update is the 'priority' regulated and can NOT download. The sequence 4971 vs AcceptRate 1051.
  2011-04-13 10:05:50:868 964 DnldMgr 5b 0 * DnldMgr: downloading new job [UpdateId = {A5C121B0-421B-41C9-BC2D-1C468206FF06}.101] *.
  2011-04-13 10:05:50:868 964 5 b 0 DnldMgr rules: {7971F918-A847-4430-9279-4A52D1EFE18D}-A5C121B0-421B-41C9-BC2D-1C468206FF06 update is the 'priority' regulated and can NOT download. The sequence 4971 vs AcceptRate 1051.
  2011-04-13 10:05:50:868 964 DnldMgr 5b 0 * update may not download due to regulations.
  2011-04-13 10:05:50:868 964 5 b 0 DnldMgr rules: {7971F918-A847-4430-9279-4A52D1EFE18D}-A5C121B0-421B-41C9-BC2D-1C468206FF06 update is the 'priority' regulated and can NOT download. The sequence 4971 vs AcceptRate 1051.
  2011-04-13 10:05:50:868 964 DnldMgr 5b 0 * DnldMgr: downloading new job [UpdateId = {FC2009D2-934E-45AE-9C72-C5DD9D9B5893}.101] *.
  2011-04-13 10:05:50:868 964 5 b 0 DnldMgr rules: {7971F918-A847-4430-9279-4A52D1EFE18D}-FC2009D2-934E-45AE-9C72-C5DD9D9B5893 update is the 'priority' regulated and can NOT download. The sequence 4971 vs AcceptRate 1051.
  2011-04-13 10:05:50:868 964 DnldMgr 5b 0 * update may not download due to regulations.
  2011-04-13 10:05:50:868 964 5 b 0 DnldMgr rules: {7971F918-A847-4430-9279-4A52D1EFE18D}-FC2009D2-934E-45AE-9C72-C5DD9D9B5893 update is the 'priority' regulated and can NOT download. The sequence 4971 vs AcceptRate 1051.
  2011-04-13 10:05:50:868 964 5 b 0 DnldMgr rules: {7971F918-A847-4430-9279-4A52D1EFE18D}-FC2009D2-934E-45AE-9C72-C5DD9D9B5893 update is the 'priority' regulated and can NOT download. The sequence 4971 vs AcceptRate 1051.
  2011-04-13 10:05:50:868 964 5 b 0 Agent *.
  2011-04-13 10:05:50:868 964 Agent 5b 0 * END * Agent: downloading updates [CallerId = AutomaticUpdates]
  2011-04-13 10:05:50:868 964 5 b 0 Agent *.

  Hello DavidDyckhoff,

  Thanks for your post.  Please scroll through these troubleshooting steps below and let us know the results of each utility so that we can better help you get this issue resolved.

  1. According to your architecture of Windows 7, download / install and run the tool update system - CheckSur you can download the tool from the links below depending on your system type.

  Download the tool update system (64-bit)

  Download (32-bit) system update readiness tool

  2. click Start type cmd (you should see the command prompt fill up) right click and select run as administrator

  Inside the command prompt, type sfc/scannow

  For more information regarding the file system checker.

  * If corruption is found, see How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  3. once the SFC is finished, check your hard drive for errors.

  4 restart the system update readiness tool. If errors have been eliminated, try to reinstall Service Pack 1. If this is not the case, go to step 5.

  5. perform a Startup Repair, when starting, try to install the Service Pack.

  We can't wait to hear back on your part.

  See you soon

• Windows 7 SP1 - failed to configure service pack - returning changes__

  Man, it was a day both process and still does not.  As for others, I tried all the steps recommended without result.  Once I get my computer to "land of reversion", I think I'll forget install the update.  There must be a bug in it.

  Other solutions?

  ML

  Hello Littletime,

  Thank you for your message.  Could you please let us know the steps you have already tried so that we don't not be redundant?  I will include the recommended steps for troubleshooting the installation of SP1 issues.  If you have already tried these so please do not keep count.

  1. According to your architecture of Windows 7, download / install and run the tool update system - CheckSur you can download the tool from the links below depending on your system type.

  Download the tool update system (64-bit)

  Download (32-bit) system update readiness tool

  2. click Start type cmd (you should see the command prompt fill up) right click and select run as administrator

  Inside the command prompt, type sfc/scannow

  For more information regarding the file system checker.

  * If corruption is found, see How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  3. once the SFC is finished, check your hard drive for errors.

  4 restart the system update readiness tool. If errors have been eliminated, try to reinstall Service Pack 1. If this is not the case, go to step 5.

  5. perform a Startup Repair, when starting, try to install the Service Pack.

  The next logical step is to perform an InPlace upgrade.

  Keep in mind:

  An upgrade on the spot is the final solution before you have to reinstall the operating system.
  Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.

  How to perform a repair installation of Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2. Run a repair installation will restore the current installation of Windows to the version of the installation DVD. It also requires the installation of all the updates that are not included on the installation DVD.

  Note Run a repair installation will not damage files and applications that are currently installed on your computer.

  To perform a repair installation of Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2, follow these steps:

  1. close all running applications.

  2. Insert the Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2 DVD
  in the DVD drive of the computer.

  3. in the settings window, click install now.

  Note If Windows does not automatically detect the DVD, follow these steps:

  1. click on start and typeDrive: \setup.exe in the box to start the search.

  Note Assigned placeholder is the drive letter of the computer's DVD.

  2. in the list programs, clickSetup.exe.

  3. in the settings window, click install now.

  Click go online to get the latest updates for installation (recommended)

  Type the CD key if you are prompted to do so.

  In the "Windows Installer" page select the operating system you want to update or Inplace.

  Click Yes to accept the Microsoft software license agreement.

  On the which type of installation you want? of the screen, click upgrade.

  Once the installation is complete, restart your computer.

  Please see: How to perform an upgrade in Place on Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  We can't wait to hear back on your part.

  See you soon