PES 11, divide scanned Photos is not active

Similar Questions

• Photosmart 6510 - no computer"found" - "Scan to computer" not activated

  Hello

  With the help of HP Probook, with Windows 7 Professional.  64 bit.

  My Photosmart 6510, I cannot scan documents on my laptop. I think that this only started happening recently when I started to use AVG PC Tuneup software, but I have district check if this may be the cause that the scanner is aunable to detect the computer.  I get the following message:

  "No computer was found - make sure that the printer software is installed on your computer and that the 'Scan to Computetr' is enabled via the printer software.

  I uninstalled the software and reinstalled again.  When reinstall it wonder "Enable scan" I agree.

  Previously, the "Enable scan" message popped up whenever I have rebooted, but that has stopped so I think something may have changed.

  Any suggetsions would be welcome.

  TX, Kurt297

  Hello

  Please, download the following tool and run it on your computer:

  http://ftp.HP.com/pub/softlib/software12/COL50849/MP-135113-1/HPPSdr.exe

  Hope he will give some answers if not reinstall full feature software and drivers from following link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&product=5058336

  Kind regards.

• Dividing scanned photos on a single analysis

  I used PSE6 and just install PSE12.  I work a lot with images, and the editor/image option to split multiple photos in a single analysis does not work.  It is pale in print and is not an arrow like other choices.

  I have a HP PC with Windows 7 and a scanner that works perfectly, Canon LIDE.

  You're in Expert mode.

  See you soon,.
  --
  Neale
  Insanity is hereditary, get you your children

  If this post or by post from another user solves the original problem, please mark as correct and/or useful messages accordingly. This helps other users with similar trouble getting answers to their questions more quickly. Thank you.

• Scan of the computer is not activated after reboot

  I have an Officejet 7500 a wireless connected to my network. A Windows XP system installed the management software. I have activated the service computer scan and it works very well. However, the XP system shuts down every night and when it is restarted the computer scanning function is NOT active.

  Is it possible to activate computer scan automatically when the XP system starts? It's a pain in the neck having to open the management console and activate it manually every day.

  Thank you.

  Hello

  Have you installed the latest version of the software from the website or used the original software?

  The eralier indeed requested software to allow scanning to computer restarting the PC, the latest version of the software allow however to paramantly.

  If you have the original software (can be identified by its black background) uninstall by clicking programs > HP > Officejet 7500 a > Uninstall.

  Then download and install the latest version of the software below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-109374-2&cc=us&DLC=en&LC=en&OS=228&product=4083652&sw_lang=

  Shlomi

• My photo stream not sync on Photos

  Literally, I'm baffled by this problem.

  I have an iMac 2010, fully updated with OS X El Capitan. Photos works perfectly on this computer and my photo stream everything is synchronized and actively implemented to date.

  I have a new, very expensive 2015 Mac Mini i7, 16 GB, 1 TB fusion (1.09 TB free 1.11), also with OS X El Captian v 10.11.3 - fully up-to-date.

  When I opened the pictures on the mac, I have no less than 92 of my Photo stream Photos. There are currently 791 in my feed on my phone or my iPad.

  On the Mac Mini.

  Photos > Preferences > iCloud is configured as follows:

  • My photo stream - enabled
  • iCloud, photo sharing - enabled
  • iCloud photo library - not selected.

  System Preferences > iCloud > Photos is configured as follows:

  • iCloud photo library - not activated
  • My photo stream - enabled
  • iCloud, photo sharing - enabled

  On my iPhone 6 and iPad 2 Air, iCloud is configured as follows:

  • iCloud photo library - not activated
  • My photo stream - enabled
  • iCloud, photo sharing - enabled

  If I take a new picture on one of my mobile, it appears on my new Mac Mini in photo > Albums > my photo stream, but I am unable to get one of my old images.

  The oldest of the stream was taken on 27 Jan 16. I can't get my head around it as the settings above for the mini are the same exact settings has my iMac and Photos of work very well on the iMac.

  If I find information for Photos > Albums > My Photo Stream, it says January 25, 2016, 20:31 - February 25, 2016, 13:59

  It's like it's synchronization only one month with a value of images.

  I deleted the photo library and tried, killed the process (according to the many guides online), rebounded from the machine, nothing works.

  I left this Mac Mini on days with power off eco mode so it's just day and night, with nothing but open Photos, and it made no difference.

  What's not here? I hit a brick wall.

  Get help using my photo stream - Apple Support

• photos extensions option says not activated pictures

  After opening photos on my mac and will amend, extensions, more a box appears saying that pictures do not activated and no extensions appear in the corresponding box.

  What applications that include extensions have you purchased and installed? Among the applications that include extensions are listed here - Photo editing for Photos for Mac Extensions

  LN

• Location of the scanned Photos

  Hello

  I was analyzing a number of photos in PSE7. In the initial dialog (ctrl + U) I go to the location that I want the files sauvΘs. However when I scan a photo PES says it cannot import the photo because there exisists in the catalog... and it already gives the location: (c:\users...\temp\PSAlbumimport), which is not the location I specified.

  I can let the program ofc save files where it wants and then move them to where I want to that they but clearly something is on the location I was riding. Can someone tell me what to do about this please?

  Thank you

  Jim

  By default, PSE has save scanned photos to the location specified in the preferences, i.e.

  Preferences-> scan-> files.

  Navigate to this location. You can find the files analyzed in this place.

  ~ Sourabh

• Photo stream not updated

  My photo stream on my iPhone is fine. But on my Mac, it has not updated for some time. When I go to System Preferences > iCloud the area of the photo is not checked, same process on my iPhone it is. When I try to check on my Mac it say 'check library' and then do nothing. I tried to fix my photo library was well and no luck.

  

  Hello, metro0308!

  Welcome to the communities of Apple Support!  From what I understand your post, you have activated my photo stream to your iPhone, but you have a problem, allowing it on your Mac.  Of course, I know how it is great to have your photos of streams available on all your devices, and I'd be happy to help you.

  There is another way to turn on my photo stream, then try these steps instead:

  1. Open the Photos on your Mac application
  2. Click on the 'Photos' (top left corner, by the  menu)
  3. Click on "Préférences."... »
  4. Go to the iCloud tab (sign in with the same ID Apple you use on your iPhone If you are prompted)
  5. Place a check next to 'My Photo Stream'

  For your reading, I also want to give you the links to these resources we have on the functionality of my photo stream:

  My FAQ photo stream

  iCloud: overview of my photo stream

  iCloud: set up my photo stream

  Get help using my photo stream

  Have a fantastic day!

• Camera with GPS and Photos shows not all contact information when importing photos in pictures

  I have a Nikon AW130 with active GPS. While previously using iPhotos he always imported the exact location when you import photos. I'm using pictures and nothing appears under location. We are on a cruise on our sailboat and spend 10 months foreign traveling or diving in remote locations, geotagging is important. And I'm not geotag pictures of thousands that we take in a season of navigation manually. The Internet is also either not always available or slow and costly iCloud is not always possible. So what is the solution? Thank you.

  Photos will show the locations only, if the computer is connected to the internet after importing the photos. He needs a database of Apple connection to retrieve the names of places.  Pictures don't show latitude and longitude but a place name. If you have an internet connection, you should see a name of places and a small map in the Info Panel for photos.

  

  We are on a cruise on our sailboat and spend 10 months foreign traveling or diving in remote locations, geotagging is important

  Names of places in photos are not a great help in navigation.  Most of my photos of sailing is simply display "North Atlantic" or "Sea of Caribbean", such as the location, but the locations of the pins on the map are correct.  And if you export photos Tags the GPS will be integrated. Just, make sure that you enable empbed location information in the Photos of preferences > General.

  You can check if the GPS has been applied by the camera, if you export Photos photos, open in preview. The Info Panel in preview (Tools > Inspector) will tell you the GPS coordinates.

  

• R6400 after the firmware update, genius says WiFi connectivity not active... but I have wifi...?

  Under resolution of the problems of connectivity after a power failure, I have updated the firmware via NETGEAR engineering. Have connectivity all return, but on the "home page" of engineering, I have a STATUS: not activated under WiFi connection message. When I opened the connection WiFi button, I get a "can not scan wireless networks. Make sure that your wireless network card is enabled and is not disabled"message.

  Yet... all my devices wifi in the House appear on the network map, and I HAVE wifi access via the router on 2 devices, I tested.

  What this message REALLY says to... and how can me I make it disappear?

  Thank you.

  The f

  Hi @bemused59,

  The message on the "Home" of the NETGEAR engineering page indicates that the device you are using does not have a wireless adapter, or you turn off / disabled. If you are using a laptop, it is possible that there a physical wireless switch that must be turned on and off. I recommend the manual for it.

  Kind regards

  Dexter

  The community team

• OfficeJet Pro 8610: Scan photos Officejet Pro 8610

  How better to analyze photos w OfficeJet Pro 8610

  I saw on YouTube there is a possibility to configure settings on app scan to detect the sizes photo placed on the glass and also scan several photos.  I can't find these settings when I open my scanning application

  Note: downloaded the web driver and have not installed the disk due to the lack of hard drive on my MacBook Pro.

  found the answer to my own question - Apple - printers scanner system preferences control settings - NOT of HP scanning App

  Took 2 hours but bat pay $ 99 for the one-time support of HP

• HP Photosmart all-in-one scan button does not work - Windows 7

  "After you have reinstalled C4750 all-in-one software on my desk, I am constant flashes of" Windows configuration... TryApp ".

  In addition, the printer Scan to PC button does more work. Scans can only be initiated from PC. It would seem that the scan key is not associated with an application to launch the activity.

  Advice on corrective action to both questions would be welcome.

  Hi cliffview,.

  Welcome to the HP Forums!

  I see that your photosmart is not scanning.

  Please let this first message error/loading, so that you can tell me exactly what he said.

  Can analyze you successfully since the HP Solution Center?

  Also what the printer said when trying to scan to the computer?

  Hope to hear back and thank you for posting.

• My Windows Photo Gallery has incorrect time for good that my computer is correct. I know how to change the time, but wanted the exact time is displayed automatically when you scan photos etc as before.

  Time is incorrect in Windows Photo Gallery and I would like to do this automatically scanned early for photos instead of my change time.

  Hi Sardai,

  Unfortunately, this information is not always accurate. If you took some of your pictures in a different time zone, for example, the time recorded for these pictures could be incorrect by several hours. The camera can also be set to the wrong date and time. Or, if you're scanning photos, ta date will reflect the date that they have been digitized, not the date on which they were taken. All these anomalies can be adjusted manually.

  To change the date or time

  1. open Windows Photo Gallery by clicking on the Start button, all programs, and then clicking Windows Photo Gallery.

  2. If you do not see the details on the side of the window pane, click information on the toolbar to display it.

  3. click on the image you want to change.

  1. to select more than one picture, hold down the CTRL and click each picture you want to change.

  4. click on the date at the top of the details pane.

  5. click on the arrow next to the date and then click the correct date on the calendar.

  6. click on the time at the top of the details pane.

  7. Select the correct time.

   

  To adjust the time for pictures taken in a different time zone

  1. open Windows Photo Gallery by clicking on the Start button, all programs, and then clicking Windows Photo Gallery.

  2. right click on the image you want to change and then click on change time taken.

  To select more than one picture, hold down the CTRL and click each picture you want to change, and then click a picture when you are done.

  3. in the change to box, type the number of hours to change, or click the up or down arrow to select the number of hours. To make the new start time, type a minus sign (-) before the number.

  For more information, see the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-date-and-time-a-picture-was-taken

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• C4780 all-in - one HP printer - Hung in scanning, Photo, copy state - can't print

  Somewhere, I am in a State where "Scan, Photo, copy" lit.  Recycling power does not consider out of the State. Button cancel-X and the 'Back' button are not lit.  I feel in queue to the top, jon, but cannot print until I get out of this mode.  Recycling power does not help.  I don't want to scan, Photo or copy.  How can I get out of this mode?  Help, please.

  OS: windows 7 Pro
  Printer: C4780

  Disconnect the power supply to the back of the printer and the wall.  Wait 2 minutes, plug it all back in and turn on.

• Cursor disappears when entering, the window is not active.

  I have Vista home SP2.
  When I type the cursor disappears and the typing stops. The window is not active until I'm clicking on it again. It's as if it times out.
  I thought it was just Firefox, but that's all. I watched q. similar, but nothing. It has been since the last update, or just before, then, either, about 3 days.

  Hi Hobittual,

  Follow the instructions below that may help you resolve the issue.

  Method 1:

  Follow the instructions to start the computer in safe mode.

  1 turn on the computer or restart the computer

  2 start typing the F8 key. The Windows Advanced Boot Menu of Options will appear.

  If you start typing the F8 key too soon, some computers display a "keyboard error". To resolve this issue, restart the computer and try again.

  3. ensure that the safe mode option is selected.

  4. press ENTER. The computer then begins to start in safe mode.

  Check if you have the same problem in safe mode as well.

  Startup options (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Method 2:

  Let us perform virus scan online that may help you resolve the issue.

  Windows Live OneCare safety scanner is a free service designed to help ensure the health of your PC.

  • Check and remove viruses
  • Get rid of junk on your hard disk
  • Improve the performance of your PC

  Click on the link below for Online Virus scanner.

  http://safety.live.com/

  Check whether the problem is resolved.

  You can go to Microsoft Security Essentials protect your computer from malware.

  Click on the link below for more information on Microsoft Security Essentials.

  http://www.Microsoft.com/security_essentials/

  You can also check out the link below.

  How to get rid of malware

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP