PGIA

Similar Questions

• Inks PGI-2 and PGI-9

  Hello, I use a Pro9500 Mark II printer. Could someone tell me the difference between PGI-2 and PGI-9 inks please?

  Dear John,

  Thank you very much for your answer. I think you're right. I'm in the Japan and I bought the printer used in the Japan and it's UI printer, and he installed the inks PGI-2. The manual also indicates inks PGI-2. When I searched in English for the Pro9500 online, I was reading pages PIXMA Pro9500, specifying the PGI-9. I had not noticed the difference in UI and PIXMA before today. Now, I know that I should stay with inks PGI-2. I can well imagine that I'm not sure they are the same composition PGI-9 inks, but with different chips.

• Inks Canon PGI - 9 packaging problem? Cellophane has tears in it, would this cause of ink to dry?

  I just received a kit of inks PGI-9 my supplier (Amazon) and I noticed that 8 of the 10 packs ink have small notes in the cellophane to the outside. It's strange because the box pack value itself seems to have any damage to it. I have one of the packs have not yet opened.  The cartridges look ok and the legs orange all watch them to be properly attached, but I fear that cuts in cellophane can cause the ink to dry, especially since I don't know how long this kit sitting in a warehouse somewhere.  The inks would be ok as long as the orange tabs are always connected?

  Hello.

  If the orange tabs are still fixed tanks should function correctly.

  If you are having problems with tanks brand Canon authentic and need help, find more help contact us.

• PGI-5 BK not used?

  Hello world.

  I print ID CS4 on a Canon Pixma MP830 inkjet. After printing documents of 42 pages of more than a dozen, I noticed that one of the two black cartridges, the larger PGI-5 BK, has not diminished in his tank. Meanwhile, the smaller black CLI-8 BK has been consumed.

  Is it because my print profile is RGB instead of CMYK - or another reason?

  I have my preferences for Canon / intensity of the color , value Manual > Auto (no Photo, graphicor No). I have the Media Type Photo Paper Plus Double face value & using glossy HP Brochure paper, 48 lb. My document contains pictures high resolution and graphics.

  Thanks for helping out. It kills me not seeing not the cheapest cartridges being consumed. It's just a little too complicated for me to understand, and I can't seem to find a Canon forum for this question.

  Paul

  Pigmented inks generally don't work well on coated paper, so it's probably for plain paper as a FAX printing

• How can I configure numerical Lock ON when the computer starts?

  I have a new laptop HP G70.  In the User Guide HP G70 on keyboards - C01540939.pdf, paragraph 3 using keyboards & pointing devices, Page 8 there is a note "the function of the keyboard that is active when the computer is turned off is restored when the computer turns on.   This does not work on my computer HP G70.  It always starts up the number Lock OFF.   How can I configure my computer to set the digit Lock ON when the computer starts?  I always use the number keypad and never use page up/down - button on top/bottom/right/lelt arrow.

  Also, how can I configure my computer to set the touch mouse on the computer OFF for the start.  I always use an external mouse.

  Any help would be appreciated.  It is a simple thing, but the present operation HP G70 is most annoying.

  PLEASE DO NOT CONTINUE TO MEET THIS PROBLEM!

  THE HP G70 WAS FAULTY!   EACH HP G70 HAS THIS PROBLEM!

  HP REPLACED MY HP G70 WITH a HPdv7.  THE HPdv7 PERFORMED THE DESCRIBER NERMAU LOCK FUNCTION AS IN THE HP INCTRUCTIONS.

  .
  
  Bob_in_PGI

  I'm surprised that nobody knows how to set the Num Lock at startup before you connect.  Where is the help of HP?

  I now have Windows 7 64 bit.

  There must be someone who knows how to do this.

  Bob in PGI

• Intel WiDi question with my Satellite L750

  Hello

  I bought the new WiFi module on ebay and Intel 7260 supports wifi 867Mbps (in theory) speed and Bluetooth 4.0.

  WiFi works perfectly but the problem is Bluetooth device is not listed in Device Manager, I tried to install the driver, but there is no change...

  Then I tell myself, actually, "I don't need Bluetooth, I need WiDi"!

  True, it's that Windows7 is unable to see PGI (Intel HD Graphics 3000 @ i3-2330). I tried to install WiDi software then installation is not started and said 'your graphics driver and your device are not compatible. Yes, because I have nVidia gt520 and pressed 'nVidia Optimus' can I get the latest version of the nvidia driver, but there is no change.

  I need my own Cpu IGP to install WiDi software,.

  Help, please!

  The WLan seems to bear WiDi, as stated on the page Intel ARK:
  http://Ark.Intel.com/de/products/75439/Intel-dual-band-wireless-AC-7260

  But to use the Intel WiDi some these prerequisites are necessary:
  [What are the system requirements for the Intel Wireless Display (WiDi)? | http://APS2.Toshiba-tro.de/KB0/FAQ1A037S0000R01.htm]

  Also I recommend that you check this document:
  [He known issues when you use Intel Wireless Display (WiDi)? | http://APS2.Toshiba-tro.de/KB0/FAQ1A037T0000R01.htm]

  In addition, you must update the software Intel for the last State:
  Review of min. Intel HD Graphics Driver 15.28.12.64.2932
  Intel PROSet/Wireless Software Dept. review 15.5.6_e(64 / 32)
  Review of min. driver Intel WiDi 3.5.40.0

  * Important notice for users of Wireless Display (WiDi) :*
  Intel® Wireless Display is no longer supported on Windows 8.1

• Full screen in vista/games on Satellite L series

  Hello guys I bought yesterday a computer satellite laptop with vista, I wonder how I can activate my games runs in mode full screen. I play in a small window. and this isn't the compatibility mode. Thank you

  Glance you have a PGI X 3100. Update the latest Intel driver and this will help you.

• (Amplifier) signal for system cDAQ conditioner!

  The system I want to build will be used to monitor the excitation of a motor/generator system. I have a couple of signal which are bellows 100 mV, for the example current measured with a shunt resistance to 40 / 60 mV.The problem is that I have what it takes to amplify the signal for more precision. Can someone provide me with a packaging option (low cost) material. I have at my disposal two NI 9201 and a NI 9205 card.

  Thank you have a nice day!

  Hello Padeanu,

  Please post on the Forums of Discussion! The 9205 already has a PGIA (Programmable Gain Instrument Amplifier) that amplifies the signal of your then you lose accuracy. According to the specs, you will get 174 uV of precision using the voltage range 200 mV and a width of 6.57 uV code / LSB. Your current configuration is too vague for you? Excitement for your engine system will be always lower than 100 mV, even when the motor is started?

• channel-to-channel isolation for the NI9205/9206 differential configuration mode

  As indicated in the data sheet of NI9206

  /*****************************************************************

  Maximum voltage

  Connect only the tensions that are within the following limits.

  HAVE to COM, PFI0 com and DO COM... ±30 VDC

  Isolation voltage

  Track-to-track... None

  Track-to-Earth

  con category I

  U.S. (UL 61010 - 1)... 600 VDC, soul

  **********************************************************************************/

  I don't know if I get this right.

  COM actually refers to the common ground for MUX, PGIA and Front end ADC. COM to the Earth is 600VDC max. Any to use differential or CSR or NRSE configuration, HAVE to COM must be ±30 VDC. For example, COM is connected to 400VDC referenced to the Earth. Using a differential configuration, (AI0 +, AI0) - can mearsure between ±5 VDC (scale) in the range of 370VDC to 430VDC (decided by COM = 400VDC). It is also the same for the other pairs of differential input (AI1 +, AI1)-... (AI7 + AI7-).

  If so, it also means that I can not using a NI9206 to measure the ±5 VDC(scale range) and 95VDC-105VDC(scale range).

  Thanks a lot for your help.

  Concerning

  Bing

  You are right, if COM is 400 VDC, then none of the entries may be outside 380VDC to 430 VDC.  Thus, ±5VDC of measure will damage the module.  To do something like that, you'll need a channel-to-channel isolated module.

  Kind regards

• My Canon Pixma iP 4200 print green.

  I have tried all troubleshooting to check if the ink tanks are adequate and procedures in the right position for cleaning the printhead manually.  But my ip 4200 canned GREEN print. Measures to dispel this probvlem wlould be appreciated. Thank you...

  Hi FLJerry,

  When printing from the PIXMA iP4200 does print correctly (as with a green tint), the first step would be to ensure that the correct inks are installed and are in the correct order.  The correct order is:

  CLI - 8Bk black
  PGI - 5Bk black
  CLI - 8Y yellow
  CLI - 8 M Magenta
  CLI - 8 c Cyan

  Next would be to perform print head cleaning.  Because you have already done this, it is recommended that you contact the direct technical assistance. There is NO charge for this call. Please call 1-866-261-9362, Monday - Friday 10:00-10: 00 ET (excluding holidays).

• New printer using cartridges CLI-225 and 226 - CLI?

  I'm in the market to replace my two old printers. I like that one of them has a document feeder. The other, my faithful very MG6120 Canon, is always excellent and I have a lot of ink for her (cartridges CLI-225 & CLI-226). I wonder if any of the newer models, which have feeders, also accepts this variety of ink cartridges.

  Hi improve,

  We have not all current model printers with an ADF (ADF) and also to use the PGI-225 ink tanks and 226 - CLI.  We ask that you please call or write to us at one of the methods on the page contact us for other options that are available to you.

• I can control Gain 6251 USB amplifier!

  Hi all

  I have USB own 6251, I want to know if the gain of the amplifier (PGIA) can controlled deactivation?

  Thanks in advance

  MC

  Hi nguyenmanhcuong,

  In DAQmx, all analog input devices supports the AI. Max/Min properties that Dennis has suggested (which are the minimum and maximum values on the DAQmx create channel VI). These properties are also the sensor scaling into account (and the SCXI terminal block scaling). For example, if you perform a measure of thermocouple... Max/Min are in units of temperature (deg C, deg F, K). If you perform a voltage measurement, I. Max/Min are in volts.

  There are also lower-level properties:

  • MIO devices such as USB-6251 box also support lower level AI. Properties of Rng.High/Low, taking no sensor scaling into account. They don't support AI. Gain.
  • Devices like the 4462 DSA NOT supported also the AI of lower level. Rng.High/Low and HAVE. Get the properties. The NOR-DAQmx help file that is located on the start menu, explains in the section named 'win for DSA Devices'.
  • Devices like the SCXI module - 1102 SCXI also support the AI. Well and some blocks to connect SCXI as the SCXI-1313 also support the AI. Attention property.

  Since you're using a USB-6251, HAVE. Gain is not supported for your motherboard. Use of I. Max/Min to set the limits of entry (the voltage range you want to measure) and NOR-DAQmx will choose the appropriate hardware parameters. If the range you specified is not available, OR-DAQmx selects a broader range. You can read I. Rng.High/Low what chose the hardware settings OR-DAQmx.

  Brad

• Example: Pavilion G4 1303 AU: RAM not fully use

  My g4 pavilion have 2 GB of RAM. but when I install windows 7 (64-bit) RAM say is 1.48 GB usable... why?

  Can I use the memory full well, I have a lot of processes running, and I've never disabled anything using msconfig.

  

  

  

  The available memory is NOT used by Windows, it is used by the material itself.

  Disabling the programs with msconfig will NOT solve this problem. An update of the BIOS can.

  Please take a look at THIS page for more details.

  Citing a moderator of toms hardware:

  When the computer is turned on, the system (BIOS/UEFI) firmware Initializes the memory and peripherals. Part of this process is to create a relationship between the method of access to the memory (physical address space) and the memory itself.

  The firmware may reserve some of the memory itself for the use of material. The biggest offender here is typically a PGI, if they are present.

  Memory is also reserved for the management engine of the platform, which is a component of the chipset which control the features of the platform independent of the main operating system. Management engine is a small embedded microprocessor (not x 86 based) with its own operating system which shares the physical address with the CPU space.

  The firmware also allocates memory (not memory itself) addresses for PCI and PCIe devices. For compatibility reasons, this area of memory is aligned on the top of the lower 4Gio of the physical address space. Physical memory that would take care of this region is moved; to make this accessible memory, most motherboards it remap to a location in the address space.

  In total, on 20MiB of 60MiB memory is made inaccessible to the operating system. Operating system can tell that this is looking at the DIMM SPD and the tables of firmware, but this operating system is not allowed to access or manage the memory of these regions.

  in your case, more than 500 MB is not available. It is most likely a problem of design with the AMD IGP, and you can probably do nothing about it. 1.48 GB is not really enough for a smooth Windows 7 experience. I recommend spending at least 4 GB.

• Redistribution of BGP with EIGRP

  Hi all

  I'm trying to redistribute BGP, EIGRP, and vice versa. I'm succussfully EIGRP to BGP redistribution, but cannot get the EIGRP routes into BGP.

  Here is my config. Any guidance or help would be very appreciated.

  router eigrp 100
  network 10.18.72.0 0.0.0.255
  redistribute static route-map DEFAULT_ROUTE
  redistribute bgp 65535
  passive-interface default
  no passive-interface FastEthernet0/0
  !
  router bgp 65535
  bgp router-id 172.18.2.1
  bgp log-neighbor-changes
  redistribute eigrp 100 route-map EIGRP_REDISTRIBUTE
  neighbor 172.18.2.2 remote-as 65535
  neighbor 172.18.2.2 password ciscobgp
  no auto-summary
  ip access-list extended EIGRP_ROUTES_TO_BGP
  permit ip any any
  !
  !
  ip prefix-list DEFAULT seq 5 permit 0.0.0.0/0
  !
  route-map EIGRP_REDISTRIBUTE permit 20
  match ip address EIGRP_ROUTES_TO_BGP
  !
  route-map DEFAULT_ROUTE permit 10
  match ip address prefix-list DEFAULT
  

  Thanks in advance.

  Neil

  Add "internal to redistribute bgp' in your bgp process. By default, iBGP redistributed in a PGI. The reason for this is simply the amount of roads that can receive a bgp router can overload an igp very easily, if you want to filter routes during this operation.

  After adding this, disable your bgp neighbors and you should start to see roads.

  HTH,
  John

  Please note all useful messages *.

• C3750 interVLAN routing - no internet access for customer switches

  I have a stupid question with my itinerary (intervlan).

  I have a test configuration to a stack of C3750 as core and a few 2960's like access switches.

  http://users.fraeco.be/setup.png - switch at the bottom is the new network (VLANNED). The switches on the left is the current network of production (10.1.1.0/24)

  The C3750 to the router is a 30 network.

  There will be 6 VLAN but at the moment I have one configured. VLAN50 - 10.5.1.0/24

  The C3750 I can ping my network current production, internet, other VLANs in the testsetup... Everything.

  Of the C2960 I can ping other VLAN, join the entry door, reach the router, reached the currenct production network. But I can't reach internet. I have configured 'ip default-gateway 10.5.1.254' on the C2960. C3750 relevant config is down below.

  How can I reach other networks connected to the router and the internet not switches to access? I'm trying just to ping 8.8.8.8.

  !

  IP routing

  !

  !

  GigabitEthernet1/0/1 interface

  No switchport

  address 172.16.1.2 IP 255.255.255.252

  !

  !

  interface Vlan50

  IP 10.5.1.254 255.255.255.0

  !

  !

  IP route 0.0.0.0 0.0.0.0 172.16.1.1

  Hi, Maxim,.

  I have no idea about your configuration exactly but for the account information that u as far as I can tell... Configure all the respective host to its ip address vlan respective gateway.

  There should be a static route pointing to the router on the switch of the MLS.

  And also, make sure that it should be static (or entered dynamic in case you use PGI) of all subnets of VLANs pointing to the ip directly connected inverter MLS.

  It will certainly work.

  Thank you

  Amit

  Please rate if this post would be useful.