Photosmart 6520 - CD-ROM and ePrint

Similar Questions

• Photosmart 6520: windows 10 and photosmart 6520e

  Y at - it an update of the pilot of the aircraft photosmart 6520 for Windows 10.

  I would like to download the driver before upgrading the OS.

  When I try to download a driver from your support page (which seems to be a pkg to win 8), it won't download - unless I have install the GWP of solution of support I don't want to do.

  I want just the pkg of drivers and software

  Hello @maxie987,

  Thanks for posting in the Forums of HP.

  I want to help you in your investigation of Windows 10 drivers for e-all-in-one printer, HP Photosmart 6520.

  Windows 10 has the same functions of basic Windows 8.1 operating system, so you can actually download and install the drivers for your system Windows 10 8.1 Windows.

  Please note : If your device had fully supported (not just basic printing or scanning) in Windows 7 or 8 then your device is supported, but may not immediately appear on hp.com for Windows 10: Please download Win8.1 drivers and use them (they have been tested and have worked with Win10)

  -Source

  If you are having problems with the installation package, try to download and run the HP printer installation wizard and it will download the correct software for you.

  I hope this helps!

  

• Photosmart 6520: Miss username and password to access Photosmart 6520

  Miss username and password to change security etc. by web app to the printer

  I understand now. You are in the built-in Web server and can't access the Admin settings. In order to reset the password to the parameters, we need restore default settings of network on the printer, and then reconfigure the printer to your wireless network again. You can use the following steps to restore the default settings of network on the printer;

  1. Tap the icon of the small key (settings) you see in the upper right of the touch screen of the printer.
  2. Press the wireless Menu.
  3. Navigate to restore the default settings of the network.

  Once restored, go to the Wireless Setup Wizard in the Wireless Menu and reconfigure the settings.

• Photosmart 6520: Trying to find the Code of 'request' to record the HP printer connected.

  Printer Photosmart 6520 of is (and works perfectly), allows to print emails ok phone mobile, as the e-mail address of the printer (HP eprint one), but not able to record my printer on the HP connected site as unable to find the Code for "request".

  Have followed the instructions from HP to "Print report" and ran every possible piece of information apart from the "request Code".

  Can only guess that previously while modifying the HP eprint address and making it more user-friendly, I already activated and used the claim Code?

  I would like to fix this, so I can add a printer and display the record of the emails sent for printing.

  Appreciate any advice.

  Thank you very much.

  Hello

  The claim code to customize your ePrint address, which means that it's already been claimed and is no longer valid.

  In order to obtain a valid claim code, you will need to disable web services and reactivate, however, that means that you must select a different ePrint for the printer address, the current will not be available.

  To do this, click the Web Services and select settings, then select delete the Web Services.

  Open the Web Services option again and follow the steps to reactivate, an information sheet will include the new claim code.

  Then you can add it to the connected HP and select a new personalized email

  Kind regards

  Shlomi

• Photosmart 6520: HP Photosmart 6520 is connected but Windows says that it is not

  I'm changing the name of the printer.  It is clearly linked because I can scan and print.  But when I try to change the printer properties or preferences, Windows indicates that printer properties cannot be displayed, check the name of the printer and make sure that the printer is connected to the network.  For some reason, there are two heads displayed outside the printer.

  Hi @Draftsman,

  Welcome to the Forums of HP Support!

  I see that you are unable to rename your printer HP Photosmart 6520 in devices and printers. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution" if I helped successfully will solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand the frustration you feel. What I see, it seems that the printer is shared from another computer on the network and you do not have sufficient permissions to rename the printer.

  If you have shared the printer from your computer, you will get another warning indicating that the printer is shared, which is not what you have received.

  The two heads human icon tells me that the printer is shared on the network. If this printer is set up wireless you have no need to share the printer in this way.

  If the printer is shared from another computer on the network, this computer would need to rename it.

  If you are not sure and the printer is wireless, add the printer and do not select the option to share the installation,

  If you need assistance, please let me know the instructions above. Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Photosmart 6520: Where are right and left arrows to scroll to the bottom of the screen?

  How to scroll the screen to align my cartridges in the Tools section. . The only instructions I see say to use the left and right arrows to do this, but I have no idea where the arrows are, and they do not appear in the instruction book where he shows the parts of the screen. Thank you

  Hello

  I do not know where to find you the appropriate instructions. You can use the printer screen or software on your computer

  To align the printer from the printer display
  1. from the home screen, tap the settings icon and then tap Tools.
  2. on the Tools menu, tap and slide your finger vertically to scroll through the options, and then tap printer align.
  3. follow the instructions on the screen.

  To align the printer from printing software
  ▲ Do one of the following depending on the operating system you are using.

  On Windows:
  a. in your desktop Start menu, click all programs, HP.
  b. click the HP Photosmart 6520 series folder, click HP Photosmart 6520 series.
  c. under impression, double click on maintain your printer.
  d. on the device Services tab, double-click Align the print heads.

  On Mac:
  ▲ the HP utility open, click on align and then click Align again

  Source: page 28 user's Guide.

  Kind regards.

• I want to print in black and white only on my hp photosmart 6520

  Photosmart 6520 windows 7 How do I put this so it prints only in black and white not color at all times.

  Hi macys.

  Welcome to the HP forums!

  Implemented a Photosmart 6520 for black ink only from your Windows 7 computer? That I can help with

  You will want to start devices and printers (via your control panel) with access to your folder and right-click on your Photosmart 6520 icon and select Printing Preferences. The window that opens will be similar to the display on the left of the screenshot below. On this screen you click the Advanced button, and then you will see a screen similar to the one on the right of the screenshot. There, you go the black ink only setting and press OK. Press and then apply on the previous screen before pressing OK again. The driver will now be on use black ink only.

  

  Let me know if that does the trick for you!

• photosmart HP 6520 paper tray and touchcreen questions

  I just bought the photosmart 6520 but the hood for the paper tray seems not laid flat on the top it leaves a small space between the tray and cover with the lid.  looking around online all the photos I find paper without the space show sitting flat on the tray.  anyone else have problems with this?

  Another problem arose, I turned off the power and the display will that cross all lines and a blue bar at the bottom.  after it does all that I can do is to unplug to reset but then does all over again?

  can I return or Exchange it at best buy were I bought the 30/06/2014

  towards the end he went back to BEST BUY, which sovled all the questions I had.

• Photosmart HP 6520: HP Photosmart 6520 - error message when you try to use the apps

  I can't access is more apps on my Photosmart HP 6520.  I get the error message "error connection server - 1".

  I don't know if this problem just since I recently changed from a Windows PC on a Mac.

  I very rarely use the apps, so I don't know when it started.

  Everything else seems to work very well I would say.

  Can someone please tell me what could be the cause, or if there is something I can try to sort it out?

  I seem to be going round in circles, and I can't work on what is happening.

  Thanks for your help.

  Hey @TraceyMac,

  Welcome to the Forum from HP Support.  I hope you enjoy your experience here.

  I understand that you are unable to use the pads (Print Apps) on your HP Photosmart 6520 e-all-in-one printer.  I want to help you with this.  A recent installation of printer would not affect your performance of platelets but no loss of connection or wireless Web services could be a factor.

  Note that to access the applications and their use from the front panel of your printer requires two ingredients to be successful: 1) Wi - Fi connection and 2). the ePrint feature (webservices are enabled).

  • Touch the wireless icon () on the front panel of your printer - is the printer connected to your wireless network?  (If not, run the wireless configuration wizard, select your network name/SSID and enter your password wireless reconnect).  If you are connected, proceed as explained below.
  • Tap the icon of webservices/ePrint () on the front panel of your printer.
  • If webservices are not enabled, press OK in order to enable them and allow the automatic updates of printers.
  • This will cause your printer to print an information document describing the characters before @hpeprint.com your printer (ePrint address).  This is known as the claim code.  As another way to use printing applications available for your printer, you can sign in to http://www.hpconnected.com to program applications printing to print and review all the content that ideally will reappear on the front of your printer.
  • From there, you can click the devices tab and use the claimcode to add your printer to the site and take advantage of the available applications, it.

  If these basic steps to respond to a resolution, please, try the following:

  When users encounter this type of problem in general, I suggest from scratch with wireless printer, webservices, and apps printing configuration.  You can clear all of these parameters in a swoop by the factory default restore * your printer.

  Here's how:

  * Note that this step resets the setting up your printer wireless, address ePrint and other custom print settings. If you have created a custom address @hpeprint.com it is permanently erased. For more information about custom addresses ePrint, click here.

  • Front panel of the printer, arrow down and select Tools
  • Select restore default

  Then touch the wireless icon, run the Wireless Setup Wizard to restore your network connection, and then tap the Webservices () and reactivate your webservices.

  If you are able to successfully reactivate your webservices, tap on the icon of your printer wireless () and make a note of the IP address of the printer.  Then, follow these steps to configure a manual DNS:

  • Enter the printer's IP address in a web browser (Chrome, Firefox, Safari, Internet Explorer) and press ENTER to go directly to this page.
  • Click the network tab.
  • In the submenu on the left, click Networking.
  • Then click on the network (IP) address.
  • Click Manual DNS server.
  • DNS preferred as 8.8.8.8 manual entry
  • Auxiliary DNS server entry as 8.8.4.4
  • Click on apply to finalize this change.

  No none of the suggestions above restored the functionality you're looking for?  Please let me know the result of your troubleshooting by responding to this post.  If I helped you to solve the problem, feel free to say "You rock!" by clicking the "Thumbs Up" icon below and by clicking to accept this solution.

  Thanks for posting in the Forum from HP Support.  Have a great day!

• Can not scan to computer w/new HP Photosmart 6520

  -New HP Photosmart 6520 was installed 2 days ago. ePrint successfully as well done. I can scan to an email via eprint, but cannot parse the document to my computer. The message of the printer tells me there is a USB connection error.

  -J' quit and connected a new USB cable and still nothing!

  -Also, I see that in my programs that the only thing listed in the HP 6520 folder series is the product of the studies and nothing else.

  -Is the reason why I can't scan to computer?

  Hello

  Please turn on your computer (Windows) computer analysis:

  (a), double-click on the icon on the desktop.

  (b) select the Scan of the computer,

  (c) click on Enable

  d click OK/apply.

  You can also click Start with Windows.

  Kind regards.

• Photosmart 6520 driver for Mac 10.5

  I try to use a Photosmart 6520 new on my iMa running 10.5.  Is it possible to do without upgrading? Thank you!

  Hi nannypie,

  I understand that you have 10.5 and try using the Photosmart 6520. The only suggestion I can make is probably not ideal, but you could send what you want to print from the computer to the printer.

  Each printer HP ePrint compatible, such as the 6520, has its own unique e-mail address. After you have enabled HP ePrint on HP ePrint-enabled printer, you can print from your mobile device or connected to the network by sending an email to the email address of your HP printer. With HP ePrint, you can print from anywhere, at any time. If you can send an email, you can use HP ePrint.

  This introductory text and more information, can be found in the following Document from HP, ePrint, specifications.

  As mentioned. It is probably not ideal, it really depends on what you plan to do. If it is convenient for you as a work around so mission accomplished, we found a solution, if not...  The only other options would be to consider to resume the printer and getting another model that is compatible with 10.5 or upgrade the operating system so that Mac can allow an upgrade to 10.6.

  I know that you would not go, but you might want to consider treating yourself, there are a few available Mac nice shiney new.

  What you decide, if you want to help, feel free to post as soon as I'm happy to help you.

  I hope my recommendations to resolve your request.

• Photosmart 6520 does not print

  I have a Photosmart 6520 printer that gives me an error message when I try to print something from online my HP chromebook. This problem started a few weeks ago, before that time, I was able to print. The error message I get on google cloud print Web site is: "error in the external employment service". I was just on the phone with HP tech support and they could not solve the problem. Anyone here know how to fix it?

  Hello bassplayinlady,

  Welcome to the Forums of HP Support!

  I understand that when you try to print via Google Cloud Print to the Photosmart 6520, you get an error "error in the external employment service". When you talked with HP Technical Support, troubleshooting steps did make?

  Are you able to print from the printer by any means, a copy, post, etc.? To print a self-test; Press Setup (wrench to the right of the screen of the printer) > tools > Printer Status Report.

  Try printing via ePrint and let me know if it works as well.

  Getting started with HP ePrint Mobile Apps<>

  Can't wait to hear back on your part.

• Failed to install Photosmart 6520

  Hello

  I just tried to install a Photosmart 6520 on my desktop of Windows 7 using the supplied CD

  This fails with the message "system cannot find the file specified."

  I start by running Setup.exe on the CD-ROM

  The result is a large download of HP to a file called PS6250_1315.exe

  I run (as administrator) and access the software selection screen.

  I opt to select all software and then check the box I accept on the license screen

  Installation starts but immediately fails with the message above

  Can anyone help

  Thank you

  Gerard

  Hello

  Thank you for your comments.

  I tried this and I just get the same results.

  I contacted HP directly support that everything was still under warranty.

  Engineer support connected to my system and diagnostic problem.

  For some reason, I don't have the security permissions required for access to the

  folder that contains the files extracted, created by the installation process. He corrected this

  for me and the process of installation is completed successfully

  As I've always been the only user on this PC, why I have not rights

  remains a mystery

  Thanks again for your contribution

  Concerning

  Gerard

• updates failed every night for Hewlett Packard Imaging printing HP Photosmart 6520 series NULL

  Since I have my printer photosmart 6520 02/12/2012 every night he's trying to update Hewlett Packard photosmart HP 6520 series print NULL Imaging... .and it fails every time.  I have a desktop HP P 7 1010 and since I got a new printer, I have an exclaimation point on my computer and it says the problems and when you do it it's is not drivers and it shows NO FIXED.  When you close the session at night, he tries to update the NULL characters again and it fails every time.  I spoke with people from your service many times for more than an hour and they can't solve the problem.  Help, please

  I did some research on the problem of another user, and looks like it's just a ghost update.  Basically, an update 'ghost' is an update that was for the device, but unit has newer drivers which causes the update failing to keep.  The only thing you can do is to hide the update, or ignore it.  Windows will continue to try to push it, but your printer does not need it.  If she didn't need the update, it would install right.  You can find the thread where I helped another user below.  I hope this helps.

  I can't update HP Imaging Null Point HP Desktop 3520 on computer laptop operating system Windows 7 error 80070490

• Photosmart HP 6520 printer: hp photosmart 6520 cannot set print at 100% scale/size

  What CD jewel box impression label width and higth suddenly became smaller. It works perfectly until recently. Have uninstalled and reinstalled the printer and drivers, but I am unable to find how re set the scale to 100%. in this hp6520 Photosmart printer.

  Any help would be appreciated: very happy smiley:

  After watching your @dlddemonscreenshots, I see that you use the HPDD896C (HP Photosmart 6520 series), it is a driver not driver HP class.

  I suggest all first to remove this driver and add the printer again. In fact, I suggest to use the following steps to remove the printer from the device and printers and the driver from the properties of the server.

  1. in the folder "devices and printers".

  2. choose "print server properties.

  • Win XP - with no printer selected, click 'File' then 'server properties '.
  • Windows Vista - with no printer selected, press 'Alt' and then click 'file' then 'server properties '.
  • Windows 7/8, 8.1 and 10 - select any printer in the "Devices and printers" folder and click on "Print server properties" above.

  3. click on the "Drivers" tab at the top of the window "properties of the print server.

  4. choose the printer that you want to uninstall, and then click 'remove '.

  5. choose "Remove driver only.

  6. the next screen will give a warning, letting you know that the removal of the driver package will remove it from the system. Click 'Yes' to say are you sure you want to do.

  If documents are stuck in the spooler to print, you see an error, cancel all documents waiting in the print queue or try restart the spooler to print, and then try to delete the driver from 'Print server properties' again. If she will not always remove the sachet, restart the computer and the printer should correct this error "in use" and allow the driver to be removed.

  • If him you continue to get an "in use" message followed the steps in the document here. The specified printer driver is currently in use

  Once the driver is then deleted, open start > all programs > HP folder > folder printer > HP Setup and software (or the icon of the printer).  The installation screen and the software opens and you can click on connect a new printer.

  Once you have added the HP driver, try to print a label again and let me know the result. In addition, you may need to change ' borderless printing: Print with border ' borderless Print.

  Let me know how it goes.