Photosmart 6525

HP Envy/Win7Pro connected USB and wireless. 6525 reboots / recycle on its own and I get a "scan from computer to printer not available. No change of HW/SW. I poured all the info wireless and restored a connection.

Hello

The printer still restarts after turning off Upnp?

Tags: HP Printers

Similar Questions

  • All-in-one Photosmart HP 6525: HP Photosmart 6525 stopped properly print in black

    Happy Friday! I had a problem the last two weeks with my printer. I usually use the printer on a daily basis for school. I got the impression during 1 1/2 to 2 years and have not had a problem until now.

    Here is a list of what I've tried so far:

    • Aligned the printer
    • Clean print heads
    • Restored by default
    • Erased the vents on the ink cartridges
    • Clean the screens between the printer and the cartridge

    I did all the steps that I could find for troubleshooting on the internet. Is there something else I can do?

    Hello @chawna,

    Welcome to the Forums of HP Support!

    I understand that you are not able to print black ink of your HP Photosmart 6525 e-all-in-one printer. Thank you for all the troubleshooting steps you have already finished before reaching out for support.

    Unfortunately, at this stage, because you have already completed, troubleshooting steps listed here, the next step would be a hardware replacement as system within your camera HP Photosmart print head is defective. The print head is the part that the cartridges will fit. It controls the "reading" of the cartridges and put the ink on the page. If the print head is defective in your printer printing system is defective. On this model printer, printhead system is a non-replaceable element.

    I highly recommend to go to the Technical Support queue by phone in order to explore the additional hardware options.

    HP Technical Support can be reached at the: 800-474-6836.

    If you do not live in the United States / Canada region, please click the link below to get help from your region number.

    Worldwide contact HP

    When you talk with the phone support agent, please notify them of all the troubleshooting steps you have completed and the results of these measures.

    I wish you good luck going forward with this!

  • Photosmart 6525: auto efax print photosmart 6525

    Efax account and can receive fax, but only show up as an email. Q: a possible incoming fax to print automatically?

    The printer (Photosmart 6525) allow Eprint and connected.

    Appreciate any help,

    Frank

    Hi Frank,.

    Incoming faxes can be printed automatically, for that you must update the HP ePrint email in the settings of efax.

    Connect your user on eFax.com and change preferences as follows:

    • Sign in to your eFax account.

  • Photosmart 6525: Cannot activate ePrint for Photosmart 6525

    I had the Photosmart 6525 for awhile and it works very well in general.  I am able to print to it from any computer in the House.  I'm trying to set up ePrint, so I can print to it a chromebook but not having not success.  And I already went through the steps of troubleshooting CIHI then please don't just tell me to go their.

    Tempting of the LCD:

    When I press the icon ePrint, it downloads successfully and poster

    • E-mail addess: < code > @hpeprint.com
    • Status: connected
    • ePrint: on.

    Then, when I type 'Print Info', it tries and then fails saying: "the printer could not connect to the server."  Then, when I press "OK" to go back, it will display:

    • E-mail addess: not available
    • Status: Not connected
    • ePrint: on

    From the web interface, I deleted the web services and reactivated their.  On-screen where she wants Méthé Web Services account must be activated to ePrintCenter", then I get connected 'HP' page and login.  It runs for a long time (about 60 seconds) and finally comes back with a page indicating "your printer is activated.  I then went back to the web interface and click on "I have activated my ePrintCenter printer" and click [finish].

    It then displays a page view:

    • ePrint status: not connected
    • ePrint: on
    • The printer Email address: see the fact sheet *.

    But I don't have any document information because I can't print a.

    I then click [Ok] and once again, it checks for the activation of the printer and indicates ePrint: on

    If I select "Print a Page of Info" and then click [Print Info Page] it says "Connecting to Server" and then "Print Info sheet", but then the dialog box disappears and nothing happens.  Does not print on the printer, nothing displays on the web interface.

    On the 'Connected HP' page if I click [next], it accesses the devices page and shows no devices listed.  If I click on [add device] he invites to the "claim code" and I have no idea what it is because I can't print the worksheet 'Info' to get it.  (I already tried the steps listed here: http://support.hp.com/us-en/document/c03550536 )

    I am connected to the internet via a router.  I can access with success of internet pages (like the one I'm typing this on) of all devices in the home.

    Worked by calling support.  A "partial reset" via the menu 'help' has solved the problem.

    If you are experiencing a symptom where the printer stops an address different email every time, the reset partial should solve that.

  • Scan multiple pages to a PDF file on a printer HP PHotosmart 6525

    I just bought printer HP PHotosmart 6525 and I can't seem to understand how to create a PDF file of several pages of analysis.

    I checked this forum using web and couldn't find the answer.

    Once the page is scanned, I gives me an option to save the file. The only other option is "Cancel".  After saving the file, I was able to scan another page, which is saved in a different file. How can I keep other pages of analysis without saving the file?

    The parameters of scanning as follows:

    Article type: Document
    Type filey: PDF
    The option to save each page in its own file is not checked.

    I use my computer HP software. I tried the digitization of the document of the control panel of the pronter with the same results. No possibility to scan several pages.

    I use Win 7/64-bit.

    Hello

    Open the HP software and select scan a Document or Photo.

    Select the PDF option.

    Be sure to check the preview Scan and set the resolution to 300 DPI or below.

    Click Scan and use the pages add to scan additional pages.

    Once completed the analysis, click Save.

    Shlomi

  • is there a way to print envelopes of card half fold on a hp photosmart 6525?

    Is there a way to print envelopes of card half fold on a hp photosmart 6525?

    Hi KenRum,

    Here is a table with the envelope sizes supported for the Photosmart 6525.

    Type of envelope Envelope size
    US No. 10 105 x 241 mm (4.12 x 9.5 in)
    Card envelope 111 x 152 mm (4.4 x 6 in)
    DL 110 x 220 mm (4.33 x 8,66 in)
    C5 162 x 229 mm (6.38 x 9,02)
    C6 114 x 162 mm (4.49 x 6.38)
    Japanese envelope Chou #3 119.9 x 235,2 mm (4.72 x 9.26)
    Japanese envelope Chou #4 90 x 205 mm (3.5 x 8.1 inches)
    A2 111 x 146 mm (4.37 x 5.75 in)
    Monarch 98 x 190 mm (3.87 x 7.5 in)
    6 3/4 92 x 165 mm (3.62 x 6.5 inches)

    Fold half card envelopes are available in different sizes. Compare the size of the envelope that you try to print to the specifications to determine weather or not, you can print on them.

    Here is a link to another forum with other thread trying to custom Setup paper sizes, this may or may not be useful, but here it is in case you want to browse. > Print two greeting cards envelopes

    I hope this information is useful.

  • Photosmart 6525: Blank Pages when printing is complete

    After a print job is completed, the PhotoSmart 6525 continues to feed the sheet after sheet of blank paper until one of the following conditions occurs:

    1. The printer is out of paper
    2. I managed to successfully cancel the job (what happens usually after that at least 10 blank pages have been through, the printer jams unless)
    3. The paper jams (usually after 5 or 6 white pages). This is what happens to 90% of the time.

    Troubleshooting steps I have already taken:

    1. Hard reset of the printer (three times)
    2. Clean all rollers (at least twice)
    3. Reset the print Mac (twice) subsystem
    4. Reinstall the latest version of the printer software (also at least twice).

    Nothing did. Any other suggestions? Otherwise, it will be the first (out of seven) HP printers I've owned that lasted less than six years (in this case, 18 months).

    Hey @Fogbear,

    At this point, I will send you a private Message with instructions on how to perform a reset of programming full semi on your printer.

    Please check your private Messages for instructions. Once the reset is complete, please test stand-alone print to see if the problem has been resolved.

    I look forward to hear from you!

  • Photosmart 6525: HP Solution Center does not work in Win 10

    I hava 6525 Photosmart all-in-One printer.  I just updated my OMNI from Windows 7 to Windows 10 desktop all-in-one computer and and now the HP Solution Center will not work.  I get 'HP Solution Center cannot work because your installation of the device is not complete. "  The printer works fine; However, I can't scan.  I've uninstalled and reinstalled the printer and the software four times.  Whenever it installs without problem, but the Solution Center does not work.  Is there any solution for this?

    Hello

    The HP Solution Center is not part of the Photosmart 6525 software, it exists on your PC from your previous HP printer and have nothing to do with the new.

    The HP Photosmart 6525 provided with the HP printer Assistant software, to launch this type of HP software in the search bar and open the HP Photosmart 6520 software.

    As a refernce see the section "How can I find HP solutions for a printer manufactured after 2011?" below:

    http://support.HP.com/us-en/document/c02463264

    Kind regards

    Shlomi

  • Can HP Solution Center - I change to work with HP Photosmart 6525 instead of C310 mind

    I replaced a HP Photosmart C310 with a HP Photosmart 6525 and want to continue using the HP Solution Center.  He claims C310 when I try to use it how can it be changed or it can?

    Hello

    The HP Solution Center is software provided for older models of HP, was interrupted and cannot be used with the Photosmart 6525.

    You can use the HP printer Assistant software that is intended for your device, it is accessible by clicking on the HP Photosmart 6520 icon.

    Kind regards

    Shlomi

  • Photosmart 6525: will not print in black

    My photosmart 6525 will not print in black ink.  Clean the printheads 6 times. Cartridge replaced twice. Any suggestions?

    Hello

    Welcome to the Forums of HP Support! I see that you are having problems printing in black. I want to help you solve this problem. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

    Try the following steps to see if it will solve the problem, HP Deskjet 6520, printers HP Photosmart 6520 - printer prints a blank Page or doesn't print in Blac...

    Here is a document to manually clean the contacts of the cartridge, "not compatible ink cartridge" or "specified ink cartridge needs to be replaced" views for HP Deskjet i...

    Do not take into account the title.

    Here is a document for the reset of the printer. Ignore the title, HP printers - solve the 'problem with printhead,' "The printer failed," 'Ink system failure', or ' 0 x. / c0 > »

    Please let me know the result and if there is anything else I can help you. Thank you.

  • Photosmart 6525 will not connect to the internet to get updates day &amp; ePrint. Test page shows connected. ??

    Trying to install my photosmart 6525. It works wirelessly to my computer desktop & laptop but when I try to open ePrint it wants to check updates and reports that it cannot connect. That is what it is?

    The wireless report Test results show all "TRANSMIT" and shows 'connected' to the internet.

    I would first disconnect the router and the printer for about 1 minute. I would plug the router first then the printer. I would then try to enable web services. If not successful, then proceed as follows.

    1 obtain the IP address of your printer
    a. This can be done by pressing the icon on the printer wireless.
    2. Enter the printer's IP address in a browser.
    3. Select the tab network at the top of the page.
    4. on the left, select network.
    5. Select Network (IP) address
    6. select manual DNS server
    a. manual Preferred DNS should read 8.8.8.8
    b. alternate DNS server should read. 8.8.4.4
    7. Select apply you could get a fair warning select OK.

    Let me know how it goes.

  • IMPOSSIBLE TO REGISTER FOR EFAX - HP PHOTOSMART 6525

    Hello

    I followed the thread on the button SAVE grayed to Setup efax.  The SIGNIN button is active, but I can't save.  WHY didn't this problem been fixed yet? Can someone help me get through the registration process so that I can access this efax Free service that came bundled with my purchase of this HP Photosmart 6525?

    Thank you!

    Hi all

    IF you have also encountered this problem (cannot save with efax), don't bother contact efax... waste of time. I'm online with their cat and they told me to contact efax tech, I sent their tech staff and they sent back telling me to contact their sales dept (a LOOP).

    HOWEVER, pleased to report that, following this BLOG, ICLOUD IMPRESSION contacted me. They took my information (as described in my original post) and told me that the issue should be put together. Also, they arranged a date and time for the ICLOUD IMPRESSION to remember with the solution and/or additional assistance.

    Today at EXACTLY the appointed time, I got this call from ICLOULD. the representative asked me IF I had again received information (virtual phone efax number and PIN number) by e-mail.  I didn't do it.  Thus, the representative is contact efax to get them to pony up the phone number and PIN.  A representative of the ICLOUD will again call me Monday 5/12 @ 01:00 for HOPEFULLY, walk me through the process.  (He was SURE I have received my virtual phone to efax number and PIN at this time here...) I HOPE SO!).

    The ICLOUD REP also answered my question about whether the fax feature works if I have my printer is configured to interface with my PC via the USB cable, rather than wireless. He assured me that I have internet that the printer should fax very well (AGAIN, i HOPE SO).

    My son also bought one of these machines HP Photosmart 6525.  If it HAS THE SAME PROBLEM AND CANNOT if sign UP WITH EFAX, ICLOUD representative gave me the phone number to contact ICLOULD PRINT to start a case for my son.  IS the NUMBER of CONTACT PRINTING ICLOUD: 1-855-785-2777.  I thought that this could be useful for some of you who are IMPOSSIBLE to register with efax.  FORTUNATELY FOR PRINTING ICLOUD TEAM! AND thanks in advance for your help and your QUICK response.

  • How to install a PHOTO HP 564XL ink cartridge in the printer all-in-one HP Photosmart 6525?

    I have a HP Photosmart 6525 all-in-one printer.  I buy original HP 564XL ink for my printer in a color combo-pack at my local Costco.  The package includes 3 color cartridges as well as a 4th label "Photo".  My printer has only the slots 3 color + a location for a larger black cartridge. I would use the photo cartridge, but my question is:

    How to install the Photo cartridge?

    Thank you in advance for your help!

    Hi l_john,

    I understand that, with the combo, pack of ink you bought came with a Photo black cartridge, and you're wanting to use it in your printer. In regards to your printer, it is not compatible with the black cartridge Photo, both black and Photo black cartridges are not interchangeable. I have included a document here for you that explains this in detail.

    Thank you.

  • Photosmart 6525: hp utility closes unexpectedly when you try to set Scan to computer

    A Photosmart 6525 printer connected through WiFi to a Mac Pro under Mountain Lion (10.8.5)

    Everything seems to be alright except for the "Scan to computer" feature which cannot be enabled.

    Utility HP v. 5.10.1 closes as soon as you click the "Scan to computer" on.

    Installation has been filed using the last updated: Photosmart-6520 - series_v12.24.0.dmg.

    This works fine in Snow Leopard 10.6.8.

    Thanks for any help

    Thanks for help, but my problem is not a printing problem but rather a utility HP problem that happens when I try to activate the function "Scan to computer".

    However, I did what you suggested but to no avail. Repair disk permissions really did keep many errors about files in Safari and iTunes.

    Finally, I did a new install of OS X Lion mountains fresh on a separate partition, added to the printer, and voila, everything went well. (Note however that even on this brand new facility I stil have the same permission errors, so they probably makes no sense).

    In conclusion, it seems that there is something wrong with my drive work system and I'm afraid I'll have to reinstall Mac OS X.

  • HP Photosmart 6525 - tune printer problem after Installation

    Hi - I just bought and installed an HP Photosmart 6525 (connected via wireless), for use with a desktop computer HP running Windows 8.1.  I select the HP Photosmart icon on my desktop that opens the HP printer Assistant - however I get the following window:

    C:\ProgramData\HP\HP Photosmart6520 series\HPUDC\HP Photosmart 6520 series (network)-UDC_Install.json

    C:\ProgramData\HP\HP Photosmart6520 series\HPUDC\HP Photosmart 6520 series (Network) \UDC_device_2.json

    I click on the OK button - another window pop up opens with an additional line:

    C:\ProgramData\HP| Series\HPUDC\HP Photosmart6520 HP Photosmart 6520 series (Network) \UDC_device_2.json

    I click OK - the HP Printer Wizard is blank with a "string not found" poster.

    What is the cause of this and how to fix it?

    Thank you

    Robert

    Hello Robert, I hope you are well!

    I understand that you see a pop up window after you install the printer software. I have a guide that contains a patch, I would see you for that matter: HP Printer Wizard opens with an error in Script or in Notepad

    If the patch does not help, try to uninstall the printer software and put it back again by running the HP printer install wizard for Windows.

    Happy Monday

  • How to connect to HP Photosmart 6525 OS Mountain Lion

    I am trying to install a wireless configuration of a H P Photosmart 6525 to a Mac Mini with OS Mountain Lion, but there is n o option this operating system.

    Hello

    Below you can download the drivers for the Mountain Lion:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-106177-3&cc=us&DLC=en&LC=en&OS=4142&product=5271613&sw_lang=

    Be sure to select the HP recommended software during the installation of the software.

    Once you have finished restart your Mac and your software update execution to ensure that the drivers are perfectly up-to-date.

    Kind regards

    Shlomi

Maybe you are looking for