Photosmart b109n-z

Similar Questions

• HP Photosmart B109n-z (printing problem) Please help

  Hi all

  I have the HP Photosmart B109n-z printer and put up wireless and it works fine I had no problem with him.

  The other day the black ink stopped working - the cartridge is not empty but it's is no longer black prinking on all documents.  Since I put all new cartridges in, he acknowledges them all, including black, and if I print something like a word document, and then it moves as if printing but the page comes out blank - no black ink is used.

  I work for myself, and work at home, it will get this resolved as soon as possible.

  I checked the cartidge - it's good.

  I checked the connection and the Bay print cartridge - they are clean.

  Help, please.

  The color works fine.

  The issue of black ink is the same print, scan or copy.

  And I have tried turning everything off and on again!

  Hello

  You could try the Solution 5 in the document troubleshooting that I am a link here:

  Quality of ink troubleshooting

  This will show the colors that are printing.  There are also additional troubleshooting steps to follow

• Printer HP Photosmart B109n-z problem

  Last week I bought a new printer, photosmart B109n-z, installed wireless on my PC and installed with the USB on my desk. All good works, earlier, I often lose my internet connection on my deskto. Have to unplug/plug the internet cable again in the assessment and to reset the router, then works again... But before the installation of the printer I never lost connection with the internet. Is there a solution for this? With the laptop, no problems...

  (router: US Robotics; operating system: Windows xp sp 3)

  OK, the US Robotics router is a DSL modem/router?  What is your or your ISP?

  We will set an IP address of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). Yours is 192.168.1.100 a.199 we will use 192.168.1.220
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Let the gateway and DNS white.

  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• Photosmart b109n-z: Photosmart wireless b109n-z pilots

  I am trying to download the driver for my printer Photosmart wireless b109-n-z. The wizard detects the printer, but then crashes with the message "HP is compile your results." It could take up to 3 minutes, depending on the speed of your computer and connection. Thank you for your patience. "and not going anywhere.

  I saw a recent request for the driver to a different printer for someone who was having the same problem as me with the HP Web site.  The problem was solved by a direct link to the download.

  Confidence that you can do the same for me.

  Thank you in advance.

  The HP website for driver downloads is back and runing properly, you can download the latest drivers for your Photosmart b109n-z from HP here.

• Error creating HP Photosmart B109n wireless Mac

  I am trying to configure my B109n for wireless printing, but the installer crashes.     The printer is USB connected, but I want to move it to another part of the room.  I'm Runnin' OSX 10.9.2.

  Process: HP Setup Assistant [8324]

  Path: / Applications/Hewlett-Packard / * / HP Setup Assistant.app/Contents/MacOS/HP Setup Wizard

  ID: com.hp.SetupAssistant

  Version: 2.3.12 (2.3.12)

  Code type: X 86 (native)

  Parent process: launchd [163]

  Responsible for: HP Setup Assistant [8324]

  User ID: 501

  Date/time: 12:58:57.895 2014-04-02 + 0100

  OS version: Mac OS X 10.9.2 (13 C 64)

  Report Version: 11

  Anonymous UUID: CD4CC37E-A4CF-B07A-F990-87DC5CF774FD

  Sleep/wake UUID: 43C5067B-3BE5-4FF0-9A93-860D83D611CB

  Crashed thread: 0 dispatch queue: com.apple.main - wire

  Exception type: EXC_BREAKPOINT (SIGTRAP)

  Exception codes: 0 x 0000000000000002, 0 x 0000000000000000

  Request for clarification:

  Run @selector (performContinue ACMCustomButton 0x3592b0 sender)

  Dyld error message:

  Symbol not found: _WirelessIsAvailable

  Referenced from: Hewlett-Packard/Applications / / * / HP Setup Assistant.app/Contents/Plugins/WiFi confirm Settings.WiFiPlugin/Contents/MacOS/WiFi confirm settings

  Intended for: /System/Library/PrivateFrameworks/Apple80211.framework/Versions/A/Apple80211

  Hi PaulEich,

  Welcome to the HP forums!

  I see your message you have a Photosmart B109n you need to connect wirelessly to your Mac running 10.9. Absolutely, I'll do my best to help you with this!

  I think that the software fails is because it has not provided be used with OS 10.9. At this time, HP does not have software complete features, you will need to install it via the Apple updates. Which leads to the next question, how do I connect the printer to your wireless network. To do this, we need to connect the Mac to the printer to get setup things correctly

  Please follow this post that I did, that has worked for others, to get the printer connected to your wireless network. To restore the default settings of your printer network, please press the configuration option, then network, then restore default network, followed by Yes. So to print the Network Configuration page on your printer please follow the steps below:

  1. On the Control Panel, press the button ( ) next to Scan . The Scan/Wireless menu.

• HP Photosmart B109n: printing in black all of a sudden is not possible on my HP Photosmart B109n

  Recently, I changed the black ink cartridge (about a week) and used my printer that worked flawlessly. Then suddenly, Sunday I was printing a letter; a page came out perfectly, but then, nothing has worked.  I tried to clean the heads printer, all diagnostic tests, went on online forums and the HP support in order to find a solution.  Nothing has worked.

  Lines not yet stained or whatever it is at all appeared on the sheet of paper.  However, when printing tests were made, the colors look brilliant and rich, black appeared only gray. I tried also to clean the tank.

  I live in Bangalore, India as an expatriate and have to buy my ink cartridges on my travels in Germany where I bought my printer about 5 years ago.  As I said, it worked perfectly and then not at all.

  I would be very grateful for any help.

  Thank you

  S Lapointe

  Hi @Lapointe,

  Welcome to the Forums of HP Support! I understand that you are not able to print in black ink on your HP Photosmart B109n. I want to assure you that you have not missed the steps of troubleshooting here: the problems of quality Print to the HP Photosmart B109

  If you finish all the steps in the document above and the problem persists, not one of HPs, my personal recommendation is to use the solution put forward in the next video.  I suggest you only do this if the printer is out of warranty; How to fix an HP, not for printing black ink and lack of color printer

  Because your printer has a removable print head, you can try the method above for your B109n.

  If you always use problems after the diagnosis was made, I suggest to contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Thank you

• How to install Photosmart B109n-z on a DHCP network wireless

  I'm trying to install a HP Photosmart B109n-z on a wireless network.

  There is no DHCP server on the network.

  I can install and print using a USB cable.

  When I try to reconfigure the display of the USB wireless I get a message that says printer

  use the IP 169.254.95.189 which is not compatible with the address IP of the PC 10.1.9.1.

  HP documentation * recommends * using a DHCP server. So I guess it's * possible * for

  do without. But I have found no instruction to do so.

  There is a related announcement with the following title:

  > Resolved: Photosmart B109n-z - setting a static IP address on the printer on an active DHCP server router
  > 04/01/2010-11:24

  That the display shows:

  > Type the IP address in a browser.  You will see the internal settings of the printer.

  But when I go to http://169.254.95.189 I have a connection delay.

  169.254.95.189 ping succeeds. When I run a tool of command ' arp - a', I can see the printer.

  The above has been done using a Windows Vista-based computer. To get a second opinion, I started a Linux machine

  and did a ping 169.254.95.189. Which failed. Then I did a

  > Add a route - host 169.254.95.189 gw 10.1.6.1

  10.1.6.1 where is my wireless router. Then ping succeeds but looking upward of http://169.254.95.189

  still gives a timeout.

  So my main question is: how to set up printing on a DHCP-less network wireless.

  And a second question: the printer is supposed to listen on TCP port 80 (http) or a magic

  necessary to turn on.

  IP STATIC ASSIGNMENT HOWTO FOR HP PHOTOSMART B109n-z

  The following instructions allow to assign a static IP address on an HP Photosmart
  Printer B109n-z without using a DHCP server, and without using a router. The
  statements can also be used for other types of printer setup.

  Necessary equipment:
  -A HP Photosmart B109n-z printer
  -A computer with a wireless network card

  Laptops usually have a wireless network card. Stationary computers
  usually not.

  1 BACKGROUND

  B109n-z has four ways to communicate with others:
  (1) there are buttons and a small screen on his forehead.
  (2) it can print and scan pages
  (3) there is a USB connection
  (4) it has wireless capabilities.

  We will use (1), (2) and (4) to set a static IP address.

  2 BUTTONS AND DISPLAY

  If you're reading this, chances are that you tried to install the B109n-z and that
  the installation failed. The installation may have left the B109n-z partially
  set up, so the first step is to bring the B109n-z to its initial settings.

  On the front of the B109n-z there is a small screen. To the left of the
  It is a column of three buttons. To the right of the screen, it
  is a column in addition to three buttons.

  In fact, the buttons are just touching sensitive areas next to the screen. Each
  button's background light that the printer can turn on and off. During the
  light behind a button is disabled, the button is invisible.

  The buttons in the left column are labeled with an arrow to the rear, an 'X' and
  a symbol "OK." The buttons on the right hand column are all labelled with dashes.
  To the market, the screen displays something like this:
  Scan
  Photo
  Copy

  The background light of all three buttons in the right-hand column are on. Now press
  the button to the right of "Scan", i.e. the highest button in the right column.
  Now, the screen displays something like this:
  Wireless menu
  The scan to PC
  Scan to memory card

  Now, press the button to the left of the menu "wireless" to get this:
  Turn off wireless
  Wireless configuration
  WPS

  This option enables the radio into the printer. The screen comes down to this:
  Turn off wireless
  Wireless configuration
  WPS

  Now press the button next to "Wireless Setup", then press
  the lower right button until something like 'restore wireless settings' is
  selected. Then press 'OK' (the button at the bottom left) and answer 'Yes' to 'are '.
  "ensure that" issues. Now, it comes down to this:
  Enable wireless
  Wireless configuration
  WPS

  Finally, if the wireless radio is turned off, turn on the radio wireless with the help of the
  button at the top right.

  Now, the radio of the printer is on, the printer has an IP address of 0.0.0.0, as well as the
  printer Wireless Announces that he runs a computer-to-computer wireless
  (ad hoc) network without security. The SSID of the network is "hpsetup".

  3. CONNECT TO THE PRINTER, STEP 1

  Now, you need a computer with a wireless interface card. Ensure that the computer is
  on. If the computer runs windows, ask for a list of available wireless
  networks. If she runs something else, do something similar.

  In the list of available wireless networks, you should find a named
  "hpsetup". Connect you to it. Ignore the warning that the network "hpsetup" is
  situation of insecurity.

  If there is more than one network named "hpsetup", one of them will be your
  printer and the others can be printers in your neighborhood. Those of other
  could also be the work of airborne viruses that have infected your neighbors
  computer.

  4. PRINTING CONFIGURATION

  If you followed the instructions above, the display will show this:
  Enable wireless
  Wireless configuration
  WPS

  Select "Wireless configuration", let "print the network configuration page.
  selected, then press OK. The printer now prints a page that says things like
  this:
  IP address: 169.254.95.189
  Subnet mask: 255.255.0.0

  5. CONNECTION TO THE PRINTER, STEP 2

  Now assign the same subnet mask and IP address similar to laptop you such that:
  IP address: 169.254.95.190
  Subnet mask: 255.255.0.0

  The operation of bitwise AND of IP address and subnet mask of the printer must be equal to the operator AND the IP address and mask subnet of the laptop.

  You need to know how to set the IP address and mask of the subnet on your laptop. If you have struggling to survive on a network without a DHCP server. But if you need an update: go to the 'properties' of the network connection and choose the TCP/IP settings.

  Now open a web browser such as Internet Explorer, Firefox or whatever and look for http://169.254.95.189

  Now you can set up the printer using the web browser as an interface. To set a static IP address, do the following for example:

  -Click on the Networking tab
  -Choose wireless along the left side
  -Choose the IPv4 tab
  -Click on the manual button IP
  -Enter the desired IP address
  -Enter your subnet mask (255.255.255.0 unless you know otherwise)
  -Optionally enter an IP of the appropriate gateway (see INFRASTRUCTURE NETWORK below)
  -DNS leave empty
  -Click 'apply '.

  When you click 'Apply' you of course lose the connection to the printer.

  Now close the web browser, set IP address and the subnet of the laptop to what it was and try to connect to the printer using any IP you assigned.

  6. CHANGE NETWORK INFRASTRUCTURE

  If you want to change an ad hoc connection to aid in making a
  network infrastructure, you need a wireless router. Ensure that the
  The gateway of the printer IP is the IP address of the router in Section 5 above.

  You can now install the software on the CD supplied with the printer. If you have previously installed the printer simply to connect a USB printer,
  the USB cable, insert the CD and reconfigure to wireless technology.

  During the reconfiguration, you will be asked which network to use. Select your
  own network (that of the router to use). Do not select the
  ad - hoc hpsetup network.

• HP Photosmart b109n won't print black

  I have a HP's Photosmart b109n who suddenly stopped printing black ink. All other colors are printing very well.

  I tried all of the suggestions that I can find in various forums, including cleaning & advanced cleaning, switching off & replacing ink, realign the printer etc..

  Someone at - it any other suggestions. I am currently working at home, so my printer is important to me.

  Thank you.

  Happy to say that my problem has been resolved. I repeated the same steps several times that I had already made (including an update of the HP software) and my printer has suddenly started printing black. I don't know what was the real problem!

• Photosmart b109n cannot print in color black

  I have a Photosmart b109n. I tried to print a bunch of images and half of the images was good, but the other half was very strange. As you know a printer when it prints a picture, it makes all the colours of yellow, magenta and cyan, even in the dark. My printer can print colors perfectly but cannot print black parts on the image. It's a gray a little something. Here's an example of what it's like (the grey parts had to be black):

  My mystery is now solved. My statement was false, that the printer uses the black cartridge when it is printing photos. So the real problem was that the black ink cartridge.

• Printer Photosmart B109n

  Hello, can you tell me if the printer Photosmart B109n will take the 364 black Photo ink cartridges?  I bought one, but don't seem to be able to embed it in the cradle.

  Thank you very much

  Ian

  Thank you, you are right.  Don't understand why they number the same photo cartridge that normal black ink - did not know up to what I had opened the package that I had the wrong.  Very frustrating, especially since I won't be able to return it!

• Windows 7. HP Photosmart B109n I print 3 leaflets of column.

  I have windows 7. HP Photosmart B109n. I print A4, 3 column (without borders) leaflets, but print is cropped 1.25 down right. Tried the same thing with an impression of A4 1 column - 5/8 only in cropped on the right. Keeping the margins as small as poss, but always cropping 1.25 in. on the right. How can I increase the print area or reduce margins further, please?

  Page 64 of the user manual treats the margin control to your model of printer settings. I hope this helps.

• HP Photosmart B109n: my printer software won't install

  Hello

  I recently built a new PC with Windows 7 ultimate to replace an old man on the model used. On the former model, the system used the same exact OS like a new one and I was able to install the drivers and software to print with ease.

  However, when it is time to install the drivers and software B109n-z on my new build, the installation stops and always gives me these messages:

  

  

  For some, I know that my new PC meets the minimum requirements which wants that software but I do not know why it does not recognize my USB device and drivers.

  Any help will be appreciated, thanks.

  Hello
  Click the Start button and type folder in the search bar, then open the Temp folder indicated.
  
  Open the last HP installation folder that begins with 7z (e.g. 7zs1234)
  Open the installation folder.
  Find the file usbready.exe and rename it to usbready.old.exe
  Navigate to the main extraction folder (folders that begins with 7z) and run the Setup.exe file.
  
  Now follow the installation and check for the difference.
  
  Kind regards
  Shlomi

• Photosmart B109n: Photosmart b109n install fails on XP PC

  Hello

  I try to install the above using both the full software suite or driver files only.  The installation fails in the same place every time.  After that the review and accept the step, the software starts the installation, through verification of updates, the download of updates through, begins to apply the updates and then closes without any error message.  I made sure that no other programs are running while I install, including, browser, antivirus and firewall.  I also tried to install with both plugged into the printer cable.

  Any suggestion would be appreciated.

  F

  Hello @fcb123,

  Welcome to the Forums of HP Support!

  I would like to help you today to solve the installation problem that you experience when you try to install your HP Photosmart Wireless all-in-One printer on your Windows XP computer. Can I please you follow the steps below to get this printer is installed and works properly for you.

  Please unplug your USB cable from your computer or the printer before proceeding.

  Step 1: Uninstall the drivers:

  Even if the installation does not complete, there is a chance that a part of the software package and the pilot has made its way on your computer. For the purposes of troubleshooting, it is important that we have a clean slate to work with. Therefore, I will you begin by ensuring that all traces of the printer has been removed from the computer.

  1. Click on the Start menu
  2. Select the programs (or all programs)
  3. Select the HP folder
  4. Select your Camera HP Photosmart
  5. Select Uninstall
  6. Follow the instructions on the screen to complete the uninstallation.

  Once the uninstall is complete, proceed to the next step.

  Step 2: Check print server properties:

  1. click on the Start menu

  2. Select Control Panel

  3. Select Printers and faxes

  4. click on file and select Server properties

  

  5. click on the drivers tab. Click on your HP Photosmart and select delete. When prompted click on Remove only the driver. Click OK.

  

  6. click apply and then click OK and save the changes to driver.

  7. close the printers and faxes.

  Step 3: Delete the temporary files:

  1. Click on the Start menu
  2. Select run
  3. In the Run dialog box, type %temp% , and then click OK
  4. In the Temp folder, click the first item in the folder. Hold down the shift on you keyboard. Get off a few lines and select another item in the folder. Everything between the two points that you selected while now shift will highlight now. Select the "delete" on your keyboard. Repeat these steps under the files in the Temp folder are deleted.
  5. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. On Windows Vista, 7 and 8, if a Temp file is always si un fichier temp est toujours utilise used you can simply 'jump' the outdated and everything else will delete successfully. On Windows XP, it is not so easy. You must delete the Temp files into pieces. If a file is always used you will rise the pop is used and the "deletion" process is cancelled. Rate this file which is used and skip the next time you remove a piece. It is a tedious but necessary process for troubleshooting.
  6. Once the temporary files are removed close the Temp folder
  7. Right click on the recycling bin on your desktop and select empty recycling bin

  Step 4: MSCONFIG:

  Even if you ensured that no other programs are running on your computer when you tried your installation, there are programs that run in the background. One of the background programs may be the cause of the facility to close. Therefore, I will have you temporarily disable all background programs running on your computer.

  A program running on your computer can cause interference when you try to reinstall your wireless printer. I'm going to make sure that no program will cause problems, you temporarily turn off background programs on your computer.

  1. Click on the Start menu
  2. Click on run box and type msconfig and click OK
  3. When the System Configuration window opens, select "selective startup" and uncheck load startup items
  4. Click the Services tab, check the box at the bottom to hide all Microsoft Services
  5. Select disable all
  6. Select apply and OK
  7. Computer restart when prompted

  Step 5: install the Driver:

  1. Please click here to download the right driver
  2. Once the site opens click on the download button at the top left
  3. If you are prompted select run
  4. Once the download is complete, follow the instructions on the screen to install your printer
  5. Do not connect the USB cable until the installation program invites you to

  Once the installation is complete, please test your machine to confirm that everything is working.

  Please reply to this message with the result of your troubleshooting. Good luck!

• HP Photosmart B109n - where will all of the ink?

  This morning I changed my ink black and yellow with parts in expectation of some images of high quality printing on the map.  After changing the ink cartridges, I find I have very poor quality; no black print. Then, I searched this forum for the better part of the morning looked for advice and the instructions even followed by "soak" my print head. Then, I managed to get a picture printed at an acceptable quality, but we are now at a square - print black very hatched. I repeated the process of my print driver, but now I find that all of my cartridges are empty. So it was both cartridges are full and two cartridges which shows 3/4 full... and now 1 hour and 1 print later I have 4 empty cartridges - type of an expensive morning.

  It cost me more than 40 books.

  Keeping in mind that I have followed most of the advice on this forum, what should I do now?

  JT

  Hello RnRMusicMan,

  To be honest, I think that the printer is probably too old now to be useful to spend more time or resources. So I've now put the photosmart old discarded; He is sitting at the dump or recycling center as I type. I have, thanks to answers you gave on this forum, replaced by a HP ENVY 5530;  I thought to avoid HP, but as you were sensitive on this forum I am happy to go with HP.

  I'm about to sign up for hpconnect that I understand will mean that replacement cartridges are classified automatically for a monthly payment to me; looking at the monthly cost it looks a lot cheaper than the amount I spent on the B109.

  Thank you.

  John T.

• problem with printhead HP photosmart B109n

  PROBLEM WITH PRINTHEAD

  I tried many ways in order to I clean the printhead without result.
  It does not work. The printhead has banned.
  I want to replace it.
  My printer model is

  HP PHOTOSMART Wireless B109-n

  Q8447B

  To get a print head for this printer model, you should contact HP directly. You can find their number by following the link below. I hope this helps.

  http://goo.GL/WaHYM

• Photosmart B109n - UK now using the Australia bought

  I used to use ink 364 to the United Kingdom for this printer.  I couldn't find this number in Aust, but on checking, found my printer takes HP564 that I brought.

  I only need two colors, so put the cartridges and received the message from the printer saying that cartridges were incompatible and...

  "The following cartridges are not intended to be used to this printer as it is currently configured. Ink cartridge of black Photosmart from HP 564XL ink cartridge Cyan Photosmart HP 564XL
  HP recommends that you do not remove a cartridge until a replacement is ready to install.
  Refer to the printer documentation. »

  Can someone help me how / if I can change the configuration so that I can use locally bought the ink cartridges.  Unfortunately, I brought a combo value pack, so if I can't use the cartridges it will really be a waste.

  I'm not an ACE, so any help (please) must be in terms laymans :-)

  Hello

  Also find the hours of operations...

  Monday to Friday - 09:00 - 17:30
  Saturday 10:00 - 16:00
  (except bank holidays)

  (English only - Support hours are local hours)