problem with printhead HP photosmart B109n

Similar Questions

• problem with printhead - it's on my Officejet Pro 6830

  All I seem to get on the printer is the message above - problem with printhead and underneath there is a code 0xc19a0042.

  Could someone tell me how to get this printer working again I tried to turn off, remove the ink cartridges, looking for all the obstructions, switch on fowarding impression and the same message appears.

  Any help would be greatly appreicated, Oh and also when I took the printer out of the box that it came in a small plastic Cog is out, it may have something to do with it, but it has been printing fine since I got it a month ago.

  Hi people, just check you received a replacement of HP support printer?

  Thank you

  Ciara

  Note for someone else on this thread, please see the links below for support Docs

  Americas and Asia

  http://support.HP.com/us-en/document/c04839288

  Europe, Middle East, Africa

  http://support.HP.com/us-en/document/c04839289

• OfficeJet 6830 E3E02A: problem with printhead

  It is said in the Panel problem with printhead... Help

  You will need to contact HP, likley you will need to have a replacement printer. From a post of Sunshyn2005, contact technical support HP see the following link to create yourself a file number, then call and it can help to expedite the appeal process:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  
  File number and phone number are displayed.  Dial the phone number and to give the agent the number of folder that you just created.

• OfficeJet Pro 6830: Problem with printhead

  My operating system is Mac OS X 10.5 Yosemite but who did not have the menu drop down.  In any case, I too more ink for my Officejet Pro 6830.  I ran through the troubleshooting suggestions, nothing worked.  I've unplugged and took ink and back in.  My printer was purchased on 06/05/15.  I do not see the feature that allow the print head be replaced, who would say that my printer it just says: Oxc19a0020 and problem with printhead.  It appears so, there is nothing that can be done other than to buy a new printer?

  Solved!  HP sent me a replacement.

• HP 6830 Officejet Pro: problem with printhead

  My printer is now under warranty and started giving the following message on a month previously, the error code Oxc19a0003 "problem with printhead.  He continued to print while the cartridges are low on ink.  I guess it was the 'problem '.  I changed the cartridges today and printed 1 page without problems and in the middle of the second page, it stopped printing altogether.  The cartridges that I removed were those that came with the printer when I bought it.  I tried to find an answer this problem today nothing doesn't. I'm in the middle of a project and really need a solution to this problem.

  My product number is E3EO2A

  Help, please!

  Hello

  Thank you for using the forum.

  If you receive this error, is there nothing more you need to do, except to contact support.

  Depending on where you are in, please select the appropriate link:

  Series 6800 printer supports training US, Asia

  http://support.HP.com/us-en/document/c04839288

  Series 6800 printer supports statement Europe Middle East Africa

  http://support.HP.com/us-en/document/c04839289

  Thank you.

• HP Officejet Pro 6830: My 6830 Pro Officejet a error Messege "problem with printhead. Through troubleshooting all.

  My HP Officejet Pro 6830 worked normally and then all of a sudden it started giving the error messege "problem with printhead.  It does no more than print all.  It doesn't let me do any troubleshooting procedures.  I use a wireless network on windows 10 64-bit operating system.  My printer is covered by the warranty.  What can I do to fix this?

  You will need to contact HP for the service, they will probably send you a replacement printer.

  From a post of Sunshyn2005, contact technical support HP see the following link to create yourself a file number, then call and it can help to expedite the appeal process:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
   
  File number and phone number are displayed.

• problems with the HP Photosmart Plus b210a Wireless

  Good evening. I have some problems with the HP Photosmart Plus b210a. Precisely after printing when the printer is not detected on the network and is defined as "not available". The works remain in the queue and the printer is turned on and on again unable to work in print queue.
  The printer on the network report says "Success" for each element

  It is the same for the iPhone 4 and iPad 2

  The system is composed of:

  MacBook Pro 13 "with OSX 10.6 update now
  Connected to the Internet router Wavewgate Digicom3G150 with key
  HP Photosmart B210 Pro Aio series with ultimate drivers Apple

  Network:
  D4 HW (MAC) address: 85...
  192 168 123 102 (non-static) IP address
  DHCP configuration
  Authentication: WPA - PSK
  Encryption: Auto (AES / TKIP)

  The same system also use a PC with Windows Seven Home, but in this case, the printer works PERFECTLY! Even with the iPhone and iPad!

  Thank you for the help that you can give me

  OK, I will assume that the connection of the printer to the router and the router are OK for 3 other devices work correctly.

  Make sure that your OS X is healthy:

  1. download and install OS X Combo Update.
  2. download and install the printer drivers HP from Apple.

  After that, you can reset the printing system once more.

• HP Officejet Pro 6830: problem with printhead

  Error message: there is a problem with the printhead

  I turned printer off and unplugged, rebooted and then same message.

  This link explains with this error msg & steps to follow.

  Most likely, you will need to contact HP support.

  Open this link: www.hp.com/contacthp/
  Then enter your product number or select Auto detection
  Scroll up to "still need help? Fill out the form to select your contact options.
  Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appears.

• Photosmart HP: Printing problems with my HP Photosmart

  I had problems with my photosmart for awhile. For a while, when I would plug into the usb port of my computer, I had received the error "the disk you inserted is not readable by this computer. I used to ignore the error and used to print anyway.

  Yesterday, someone pushes my printer without unplugging the usb by behind. Now, when I try to print something, I see in the queue of the printer, the error message saying "communication error: the computer is therefore more able to communicate with your printer." "Turn off the printer, check your printer connections and look for errors in the printer and turn on the printer. I got it done and straightened my computer as well, but it does not work. After that, I opened the printer utility via my computer to print a test page, and it worked really, which is strange.

  Thanks for your help,

  Sarah

  Hi @stoukan,

  I see that you are getting the error "communication error: the computer is therefore more able to communicate with your printer." Turn off the printer, check your printer connections and search for printing errors and turn the printer. I would like to help you today. If this helps you to find a solution, please click on the button "" accept as Solution"" down below this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  What is the name and the product number of your printer? How can I find my model number or product number?

  Turn on the printer and make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation. The USB cable should not be more then 6 feet. Make sure that the USB cable is connected directly to the computer. (not a station or a hub) Try a different USB port on the computer. Check that the USB cable is connected to the appropriate port on the back of the printer.

  Check if the Mac sees the printer is connected.

  Go to the Apple, select about this Mac, system report, select USB.
  Do you see the printer listed?

  Fix permissions of the drive on the Mac:
  Close all applications.
  In the Apple menu, click OK, click Applications, and then click utilities.
  Double-click disk utility.
  Highlight your hard drive / partition on the left.
  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.
  Click on Printers & Scanners.
  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.
  Click OK to confirm the reset.
  Type the name and the correct password.
  Click OK to reset the printing system.
  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  Try to print again.

  If you're still having problems, please try another USB cable.

  If there is anything else I can help you, let me know. Thank you.

• Printer Officejet Pro 6830: problem with printhead

  Where can I find a solution (repair or replacement) the problem with the printhead?  Call to Staples made me a call to HP and an automatic reply back to www.support, that got me nowhere.

  This is my first answer on this issue known.  Followed by replys supported.

  Read it here, as your warranty would cover the Exchange.

  More information on the trade.

• Problem with the HP Photosmart C7280 all-in-one printing. Ink system failure could not copy-

  I'm having a problem on my HP Photosmart C7280 all-in-one printing. The following message appears, this is what came on the screen of the printer: ink system failure has not not able to copy, receive faxes or print. Refer to the documentation for the printer error O.cl9a0007.

  Does anyone have any suggestions?

  Hey Spider! First of all welcome on the forum.

  I recommend to remove all ink cartridges, disconnect the USB cable from the computer that connects to the printer and then turn off the printer completely by unplugging the power cord. Then, restart your computer. Turn on the printer but leave that he disconnected from the computer. After that he ended his power over the cycle forward and reinsert the ink cartridges in the printer and make sure their seat correctly.

  After you have all the cartridges in the printer correctly, then connect it to the computer. See if that fixes the problem. If not post back with no results.

  Thank you

  SeanS

• problems with hp printer photosmart d110 - connectivity

  More often than otherwise, I'm going to print to this printer from one of our laptops wireless and it won't print.

  Whenever this happens, and I run a wireless test, the printer is still fine.

  The printer appears in my devices window and seems to be fine.

  Troubleshooting never translates into a response.

  Usually, when this happens, the spooling print window that displays the status of print jobs says that the printer is offline.  I removed the checkmark next to "use printer offline" last time it was is past, and that it's worked.  I had tried before anything will do, but thought that perhaps it has been fixed once for all this time.  Especially since I saw in another post this fixed the problem of someone else.

  Tonight, it doesn't print, says nothing about being offline, but just says: "error" in the status column.  No other information.

  At the top of the list in the window where I can put as a default value, select this option for use in offline mode, etc., the word 'connect' appears.  It is not an option... the word is gray when all the other words are in black characters, and clicking it has no effect.

  I can always choose the printer of course, he sees the laptop on the network and it seems normal until you try to print.

  It doesn't seem to matter what laptop that I use, I'm having this problem with both.  I also had problems similar with this printer using any other wireless and portable.  So I don't think that it's the laptop, operating system, or anything with the network, just the printer itself.

  Suggestions?  I wish that there is a quick fix.  I'm starting to think that it is defective.

  Hi SRS12,

  Is model # D110 you printer a or b?  Here are some steps I take for a quick solution when a printer was working wireless and suddenly quit.

  1. Make sure that the print queue is empty.  If delete you it, or if it was already empty and you can not print, take the next step.
  2. Download and run HP Print and Scan for Windows doctor.  If there is no change, go to step 3.
  3. Reset your wireless network, as described in the following link.  Click here

  Let me know the results.

  Good luck!

• Installation problems with my new Photosmart C309a connection to my Macbook (OS 10.4.11

  The installer after my installation but I have regarding finally choose the printer but the printer Photosmart C309a was not rated.

  I searched HP website for a possible solution and downloaded a set of instructions using my Macbook connected directly to the printer using a USB cable and the printer's built-in System. Everything worked well and the printer has found that my computer on my wireless network then opened the Mac window to select a printer to add to my list of printer. Photosmart C309a was registered and I chose but then got the error message "year error occurred while trying to add the selected printer".

  Below was another comment, "Server-error-service-unavailable". "."

  I tried several times with the same result. I used the CD that came with my printer which stated that it was the SW for my Mac 10.4 operating system.

  I had a problem at the start when I tried to install everything on the CD and installation put OK until he got to the installation of fax utlilty and it froze. I retried several times with the same result. Finally in frustration, I uninstalled and did another installation, but this time leaving out various additional SW and the fax SW that I won't be using this printer as a fax.

  Any help would be appreciated. I quickly checked the various recent messages, but couldn't find anything relevant to my problem

  Apple has a document of support for this problem:

  http://support.Apple.com/kb/TS1975?viewlocale=en_US

• Problem with the HP Photosmart C4780 connection after moving

  I recently moved into a new place, so, get a new router, connection. Since I moved, I was not able to connect my printer (HP Photosmart C4780) to the wireless network. When I try, an error message indicates that the IP address of the printer does not match the one on the PC (a Windows 7 32 bit). How can this problem be solved? Thanks in advance

  From the front of the printer: [Scan] Setup > network > network by default.

  Now run the HP software to add your printer (start > all programs > Hewlett-Packard > C4700 series...)

• Problem with the HD Photosmart 5360 D software

  My hard drive has failed and had to be replaced. My original Windows 7 Home records have been resettled. I had to update the software for my printer. When I used the printer, it worked normally. When I rebooted, the hard drive was not found at the start, and I had to unplug the printer from my machine. I tried six USB ports with the same result. the printer worked fine until what I restarted how the hard drive wasn't until I unplugged the printer cable"

  Any help would be appreciated.

  ddjk1

  No problem!  Let me know how it goes when you get a chance to follow the steps.