Photosmart C6350 gear noise stripping

Similar Questions

• Photosmart 6520 clicking noise when printing

  When printing I hear a rattling noise, as if the gears are not mesh correctly when the carriage moves.

  Thanks for the info. The noise started just after I had replaced the cartridges, but it seems to have stopped now.

• HP laserjet 2430 gear noise

  I have HP laserjet 2430 who made so much noise in the back and I checked the gears seems perfect and even changed some of those who watched prevails. the noise is made a few seconds(2-3) after turning on the printer.

  Any help?

  I got it!

  The fuser unit has a speed right next to the equipment of fiber that animates the pressure roller and its not not perfect fitting its axis to axis. Initializing the printer, it tends to lateral movement and oscilates causing noise. I have come to discover that and am very well now. I mounted a plastic sleeve to keep it in position and its now just like new.

  Thank you

• Printer Photosmart HP2510 makes noise when turned on and never seems to turn really turn on.

  It seems as if it's endless stuck to some friendly tour on the loop.  Unplugging and plugging in the power doesn't affect him.  Every time I turn it on again it pick up where it left off: "bzz bzz bzz bzz bzz bzz Chunk, Chunk" constantly until unpluggrd.

  I have a little more information to help? The printer is connected directly to a wall outlet? Have you tried the printer on another take? Is there a power module, the power cord where you can cut and separate the power cord in two pieces? If there is a power supply module, is there a light on the module that is lit? If so, look at the solution three in this document. It will guide you through a hard reset which also illustrates to break the power cord and it plug back into the reset process. Here is the link: http://goo.gl/6erJ5.

• Photosmart C510 c510 estn: printer will not work little matter what I do

  Very frustracted, the printer ran out of ink, I replaced all the cartridges and I continue to receive messages that the ink is required. Also the ink Error Message and the Tablet keeps asking me to remove the cartridges and clean the head I did several times. Turn turn off/on the printer, including a number of times.

  Hey @v053573,

  Thanks for getting back to me on this subject. I'm sorry to learn that the given steps did not resolve the 'ink system failure' on your HP Photosmart eStation all-in-one printer C510a.

  As per your request, here is a list of all printers that use cartridges HP 564:

  • HP Deskjet 3520
  • Photosmart all-in-in-One
  • Photosmart Premium all-in-One
  • Photosmart Premium Fax all-in-One
  • Photosmart Premium Touchsmart all-in-One Web
  • Printer Photosmart D5445
  • All-in-one Photosmart 5520
  • Printer Photosmart D5460
  • Photosmart C6340
  • Photosmart C6350
  • Photosmart C6380
  • All-in-one Photosmart 6520
  • All-in-one Photosmart 7520
  • Photosmart E-Station
  • Photosmart 5510 all-in-One
  • Photosmart all-in-one 6510
  • All-in-one Photosmart 7510
  • Photosmart D7560 h
  • Photosmart B8550
  • All-in-one Officejet 4620

  I highly recommend that you contact our Technical Support by phone queue to explore additional options before buying a replacement printer.

  HP Technical Support can be reached at the: 800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  I wish you good luck going forward with this!

• C6350 printing from a laptop, but not the other

  Hi, I have a new HP Photosmart C6350 which was working fine until today. I connected via the network from my wireless for two two laptops running vista 64. All of a sudden I can't print from a laptop computer but can print fine on the other. With one that does not initialize the print job, and then a minute later, it says "Unable to print Document" when I open the HP Solution Center, it says "work has not print because of an error in the printing system." The laptop is able to communicate with the printer, it can check the connection settings, get ink levels, scanner works very well, etc., but never print jobs is completed.

  I tried to turn on/off the printer several times, I rebooted my laptop several times and it has not solved the problem. I checked the edits, and he said that everything was up-to-date. I tried all the solutions suggested and don't know what else to do. As I said, it worked fine til today. Help, please

  Too bad, solved with the help of cat online hp

• C6350 error on the screen paper jam, no paper in the machine, not pc connected, error will not clear

  printer photosmart c6350, indication of paper jam that will not delete, no paper in path, no computer involved. cleaned the sensor optics paperpath, verified actuation switch Mech... Does anyone have any ideas or suggestions? Thanks, Larryt

  Hello

  I see... so if the cart wud nmot move to the Center or to the right of the printer - try to unplug the printer and manually move the carriage... but if this step does not work... you need to replace the printer becayse the unit is already defective...

• Paper jam videos

  If you have a paper jam, the following videos will give you solutions HP has agreed for the setting of a jam.  The videos do not explain how to work around the breakage of parts that can cause a traffic jam, but they do explain (and see) the best way to resolve a paper jam.

  This video is for the HP PSC 1210.  The steps are the same for all the videos of the HP PSC 1200 series.

  This video is for the HP Deskjet D1660 printer.

  This video is for the HP Laserjet M1319f.

  This video is for the HP Laserjet P1005.

  This video was created for the HP Photosmart C5580 all-in-one.  The steps are the same for the following printers.

  "HP Photosmart C5540 all-in-One Printer
  "HP Photosmart C5550 all-in-One Printer
  "HP Photosmart C5240 all-in-One Printer
  "HP Photosmart C5250 All in One Printer
  "HP Photosmart C5275 all-in-One Printer
  "HP Photosmart C5280 All-in-One Printer
  "HP Photosmart C5283 all-in-One Printer
  "HP Photosmart all-in-One Printer C5288
  "HP Photosmart C5290 all-in-One Printer

  Adding videos more...

  This video was made for the HP Officejet K5400 printer.  The steps are the same for the following printers:

  "HP Officejet Pro K5400dn printer
  "HP Officejet Pro K5400dtn printer
  "HP Officejet Pro K5400n printer
  "HP Officejet Pro K550 printer

  This video was created for the HP Photosmart C6380 all-in-One.  The steps are the same for the following printers:

  "HP C6340 Photosmart all-in-One Printer
  "HP Photosmart C6350 all-in-One Printer
  "HP Photosmart C6383 all-in-One Printer

  This video is for the HP Laserjet CP1518.

  This video was created for the HP Officejet 6310xi, 6313, 6315 and 6318 all-in-one printers.

  This video was created for the HP Deskjet D1530.  The steps are the same for the following printers:

  • HP Deskjet 1520
  • HP Deskjet 1530
  • HP Deskjet 1558
  • HP Deskjet 1560
  • HP Deskjet 1568

• My AIO chirps B210a printer

  My AIO B210a printer makes a sound when printing. It works fine without any failure print. So I guess he needs like som of lubrication, but where and with what. ? Any suggestions?

  Hello amanda,.

  I saw your message on your Photosmart printer makes noises but it prints fine. I have a document that will guide you to clean the rollers in the printer, I hope the problem of noise for you.

  I hope this helps!

  The product makes noise when printing

  Kind regards

• HP Photosmart printer: transport stuck, makes terrible noise but does not in the book.

  HP Photosmart C5280. Transport makes a horrible noise, but cannot pick up any apper. What should do?

  It seems that there may be a foreign body stuck in one of the rolls, the transport route, or a gear is going/gone bad.

  Have you tried to remove all paper from the input tray and the control of the front of the rolls?

  Have you removed the back of the printer to ensure that nothing is stuck to the back of the unit?

  In addition, there is a document covering troubleshooting paper jams.  This may or may not be a paper jam, but the steps of troubleshooting for a noisy product will be the same.  Click here to access this document.  There is also a document to this printer which covers when the unit doesn't feed paper.  Click here to access this information.

  I hope this helps.

• Photosmart 7520 (new) Auto Doc feeder does not work screaming loud noise.

  I just bought this new in box of a second party.  He was obviously nine original bag/Ribbon plastic on the entire unit.  Everything works fine but the car doc feeeder on power unit it is that loud screetching noise sounds like there is always a piece of tape somewhere.  I looked everywhere in TI lifted lids etc.  I had several hp printers and scanners with feeders doc auto know so well.  When you try to use the doc feeder it will move a few short clicks then paper error anyway inseterted, when I click to start a second or third time it advances once again very shortly.  I am handy with tools, etc.. Any suggestions?  Maybe it's under warranty even though I'm not 'original '?

  Thank you

  Stem

  Hey Capt-Rod,

  It is quite possible that the printer is under warranty. It is not based on the buyer, but according to the serial number of the printer. Please, either use the following link. Check your product warranty or call HP.

  If you are in the Canada, U.S. dial 800-474-6836 or you can Contact HP worldwide.

  From your description, it seems that you have done the troubleshooting necessary, but please plan to take a look at the following link. HP Photosmart 7520 e-all-in-one printer series - when using the ADF, one "original jam: clear jam and press OK' Message displays on the all-in-one."

  You will find a not just yet, you will need to complete and could very well solve the problem.

  I hope this helps.

• photosmart HP 5510 vote B11a: noise and Auful printing problem

  Hello world

  I'm new here.

  I have a problem with my photosmart HP 5510 printer, when I try to print it makes a terrible noise and it does not print.

  I try update firmware, reset the printer, change the cartridge, remove all the piece of paper, but nothing.

  Could you help me please?

  Thank you

  Alessandro

  Hi @alessandro96

  I'd love to help you with the sound that you hear from the printer. I understand that you have already begun to solve the problem, but the noise remains. Please post back with the answers to the following questions;

  1. Is the printer on a flat surface?
  2. How long has noisy for the printer?
  3. Didn't help then the noise started? (ie. the paper, printer error message jam was fallen/hit, surge)
  4. There are flashing lights, or the error messages on the printer?
  5. When was the last time that the cartridges have been changed?
  6. If you are a Virgin copy, when you hear the noise?
  7. If you open the printer do you see broken parts?
  8. When opening upward where the cartridges go, they move freely?
  9. The cartridges are installed correctly? (ie. the cartridges are level and does not appear).
  10. Perform a hard reset. With the power on remove power cord from the back of the device, then from the wall outlet. Press and hold the power button for 30 seconds (drains the excess power of the printer). Plug the power supply into the wall outlet, then the printer.
  11. You still get the noise after that?

  I look forward to hear from you.

• 5510 fact cracking noise Photosmart ink cartridge access door

  When I opened my Photosmart 5510 to access door cartridge ink it makes a cracking sound strong.

  Someone at - it the same problem?

  Or someone knows how to solve the problem of teas

  Hi MHKA1379,

  The printer may make noises if the transport cannot move freely. Return the document in the link below:

  http://support.HP.com/us-en/document/c02865805

  Under Solution 3, follow the steps to "check the way of transport for obstructions. Check and remove any loose paper or objects that restrict the movement of the cart left and right.

  Note: Use a flashlight to light up the area.

  If this does not help, follow the steps in order to ensure the "messages in the cartridge to the parking lot do not block the transport' and 'cartridges do not touch the printer cover.

  Hope this help to solve the problem.

  -Say 'Thank you' by clicking on the star of congratulations in the post helped you.
  -Please indicate the position that solved your problem as "acceptable Solution".

  Concerning

  Aneesh

  Although I am an employee of HP, I speak for myself and not for HP.

  -Say 'Thank you' by clicking on the star of congratulations in the post helped you.
  -Please indicate the position that solved your problem as "acceptable Solution".

• Photosmart 6510 noise

  I have a model B211a printer Photosmart 6510 e - All - in - one series. My computer is an iMac with Snow Leopard OS. Lately, the printer makes a noise of rattling/knocking hard. This seems to happen when the printer screen says he's going through the process "printer preparation occurring." No idea why this is happening or how to fix? Thank you.

  garytech1, your suggestion to clean the rollers seems to have taken care of the problem of noise. This printer has always made noise, but I don't hear the rattling. Thanks also to describe how get to the rollers because graphic design is different from the model that I have. Kudos to you for your help and your expertise.

• Broken in HP Photosmart C5280 plastic gears

  I have a problem with my beloved printer) HP Photosmart C5280 broken part (10 + PC GF) and specifically small plastic gear.
  In this part got 3 speed, while broke which is in the middle and attached to a metal rod.
  Where can I find these pieces, or you can send me by mail section?
  I don't want to throw the printer because of this very little damage.

  

  Sorry to hear that your printer broke. Unfortunately these parts are not available at the part store. One possibility would be to contact the HP Support to see what deal they can offer on a new printer?