Playback jerky and double speed?

Similar Questions

• DVD and CD playback jerky and delay

  I have a HP Pavillion DV5201 EU - 32 bit with XP home edition (version 2002)

  For more than a year I could not watch movies or listen to music on the subject, although it be ground music is capricious.

  I have checked for viruses and recovered the entire system, verified and changed the settings but to no avail. I wonder if it's a hardware problem, such as it is quite old now.

  I hope someone can help.

  Thank you very much!

  I'd say it's the drive and then if all the programs them to do the same thing

• Double speed playback, normal site - possible?

  Before that I have to present this as a feature request, I thought I would ask if this is already possible.

  When I press 'L' twice so that in my calendar, my video play douible speed.  This is useful for examining what said a presenter, but it is difficult to decipher the words with the field went up an octave.  Is it possible to play the video at double speed, but maintain the normal height?  How about reading at a fraction of the double, say, 150% speed?

  J. D.

  Is it possible to play the video at double speed, but maintain the normal height?  How about reading at a fraction of the double, say, 150% speed?

  Not that I am aware of. Yes; Try shift + L (for the play of forwards) and SHIFT + J (for reverse playback). Start playback with L and then press SHIFT + L; that should increase the speed in 25% increments, and you get a number of steps before it at the top of. You can do it from a paused state, also good and fractional get more slow-as-reading in real time - which is very useful, as well.

• Xbox 360 xp streaming playback is often jerky and not smooth

  I have an xbox 360 and use Windows XP with the latest version of Media player.  The xbox has no problem to find my computer and can play music.  The problem is that reading is often very jerky and are not smooth.  Any ideas on how to solve this problem?

  Hi HEZEKIAHBACOVCIN,

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  Method 1

  Try to reduce the hardware acceleration for audio playback and check if it helps.

  (a) click Startand then click Control Panel.

  (b) click sounds, speech, and Audio devices, and then click sounds and Audio devices.

  (c) click the Audio tab.

  (d) in the sound playback pane, click Advanced.

  (e) click on the performance tab, and then drag the Hardware Acceleration slider to none.

  (f) click apply , then exit each of the dialog boxes in the Panel.

  Method 2

  If the previous step fails, then manually, download and install the updated driver for the sound card on the computer by visiting the sound card manufacturer or computer manufacturer's website.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  Frequently asked questions on audio and video playback for your Xbox 360 console

  http://support.Microsoft.com/kb/945416

• Why my reading plays at double speed by default in first pro CC2015

  While I am doing a project at PP, my reading screen will double speed, even with manual slow keys, it is not smooth. I tried to reinstall PP nothing helps. I also had remote Adobe support in my PC only for them to fail and finish the session abruptly. Help, please

  ch05en,

  Yes, it could be a video codec problem, but have you checked your audio settings in first? There seems to be a problem with the first audio playback at speeds appropriate when these are not set correctly, also, there is no rub smooth as well.

  I don't know if you have an ASIO driver or what, but it's something to look at. Mine did exactly the thing until I put it for the correct driver according to the audio hardware preferences.

  Just a thought.

• Asks the plugin noise reduction effect-made clip jerky and slow down after application?

  I apply an effect - the neat video Plugin to reduce noise. for some reason when I apply the effect, playback of the clip is really slow and jerky. Why is this?

  Hi Dragonsfire,

  I'm looking at the rendering time and it's extremely slow, like the clip is 30 secs long 2mins but render time estimate is like 3 hours! My laptop is not the fastest, but it is not no more ancient. Any suggestions on the reduction to make time-no understood them with a much more powerful computer!

  You have met one of the intensive more rendered effects on the stage of post-production. Sorry if you think that something goes wrong. Likely, that's fine, except that it takes very long time to process images with that plugin.

  Here are some tips on the neat video forum:

  The real rendering for your clip speed should be around approximately 2 images per second. This value seems normal for a HD (1920 x 1080) image size and material to the average (you don't mention your hardware specifications). You can speed up a bit by disabling some of these filter options:

  • disable the very low freq, high quality options
  • some of the fixed noise reduction in some or all channels amounts (luminance / chrominance or Y/Cr/Cb) and/or ranges of frequency at 0%
  • reduction of the time filter RADIUS
  • disable the option of adaptive filtering

  These measures allow the filter a little faster, but at the expense of the quality of filtration reduced. Noise reduction is usually a compromise between quality and processing speed. When you need good quality, it makes sense to give some time to the process with the top of the settings page. When that is not necessary, you can use a less accurate and more rapid filtration.

  Thank you

  Kevin

• images pp right interprate, but gives an overview on double speed regardless of the format

  Hello

  Thank YOU for trying to help out me!

  When I play something in first pro (mediabrowser or preview window) I'm getting messed up audio and images of delay at double speed.

  It's just the 'standard' speed, so if I hit j it plays back at double speed.

  I am running Windows 7 64 bit with Premiere Pro CC 2015 on

  i2500k @3, 3 Ghz

  GTX 670 Windfrorce

  8 GB at 1333 Mhz RAM

  My Graphicscarddriver is up to date.

  I just reinstalled Windows and all this week, before everything worked flawlessly.

  
  My original file is saved on a 1200D .mov Canon with 50 fps which I converted to DNxHD for better editing.

  It is probably not a problem with the files because both play fine in Windows Media Player and VLC Player and I tried some old images of the same camera.

  As the first edition since the relocation, I guess it's a question of first.

  Any ideas?

  Thank you guys for the advice!

  given that it is a USB headset he brings his own sound card, integrated sound card is Realtek but not used for Adobe.
  After you have installed the driver for the USB soundcard on the helmet, everything works, but I do not understand how the problem is related to the audiodrivers.

  Thank you very much for your quick response, finally I can get back to work

• Playback jerky with MTS files

  I am recording video with a Canon HG10 camcorder, which exports MTS files. Although when I import them into Adobe Premiere Pro CS4 and try to edit the video is extremely chop. Not editable. I don't know if it's my physical features or something I can improve with the software. Any help?

  Entry door

  Core Duo 2.0 GHz

  4 GB of Ram

  Vista 64-bit

  You see a red line above the timeline?  If so, your source material does not match the sequence settings that you selected, and playback will suffer.

  If you have selected the right preset, or have the value manually the correct settings for a sequence, there is something more that you can do which will improve the reading.

  Most of my gear to my Canon HD camcorder is 1080 p, taken in "30 p" framerate.  I select a preset 1080 p is for 30 p framerate, and the source shows no red or yellow line above the timeline.  BUT it's still a little rough-looking at when played.  I found that this can be improved by right-clicking on the source clips in the project pane and 'Interpret Footage' as progressive (not in order of field).  You can do this either before laying elements in sequence or after - it affects them in the timeline panel after the placement, too.

  (This bit interpretation seems to be useful because many Canon cameras actually record their records 24 p and 30 p in a 60i Foundation and manipulate data to provide the progressive output.  You will see the evidence if you put these images (even if it's 30 p) in a 60i timeline, first willing to (sort of) and does no need for rendering of red or yellow line.  If you capture in 30 p all the time, you don't need to worry about this if you just interpret the film as above and regal is 30 p.)

  Advice of prejudice is true in general for AVCHD material, but it must be qualified to be of value, on the other, as in this case, does not thoughtfully address the potential of your system.  If the advice such as are not qualified with care, you can waste a lot of money on a warmer when machine you may in particular not be no need for one.

  I have edited many high-speed AVCHD projects relatively short with a frequency of 2.66 GHz Core 2 Duo - it all depends on your needs.  If you don't care about video in a perfectly smooth playback calendar and your editing features work very well and you add effects to your sequence or are not required to render the effects and transitions in your equipment if you use them, your system may be fine for you.  You may be fine with going to bed, while your project is encoded with the Media Encoder (or waiting in the next day!).  I was okay with that sometimes - I just had to move from the idea that he had always made.  I have not need the faithful reading of chronologies effect in charge most of the time, because I knew their content and saw the effects well enough without rendering.

  You will find your limit, but it's so so good to know that you can work with your system in a reasonable manner if you understand what is happening and accept the limitations with intelligent compromise.  Even if you get a more robust system, you will be able to benefit from such considerations anyway.

• How can I make YouTube playback buttons and other plug-ins more great because they are so tiny?

  How can I make YouTube playback buttons and other plug-ins more great because they are so tiny in Firefox? I tried some suggestions dealing with entering "subject: config ' in a fresh browser, but does not. I also downloaded the add-on called "Theme font & size changer", but that no longer works. So I'm reaching here that it was a suggestion that offered another user here.

  Ah, Yes, that's - a ultra high resolution (dots per inch) display. It is a known problem in Flash Player, which Adobe is working on fixing.

  In the meantime, you can get some videos to have normal size controls from the Youtube HTML5 video player:
  In Firefox, go to https://www.youtube.com/html5 and click on the button "request the HTML5 player.

• My fireefox icon has disappeared from my computer. The only way I can download firefox is to go into programs and double-click the firefox program.

  The icon that is on my main computer for firefox screen disappeared.
  The only way I can download firefox now is to go to all program and double-click the firefox program.
  How can I get the icon on the main screen so that all I have to do is double-click on the icon and download firefox?
  AlSi I mustn't lose all my favorites.

  go to the start menu > all programs & right click on the firefox icon. in the context menu, select "send to" and then "desktop (create shortcut)" (do not know if these are the exact terms since I use a non-English operating system)

• FireWire 400 and 800 speed question

  I recently bought one of these cords off of eBay for a few dollars.  I have an old external WD which was connected by usb 1.0.  I thought I could get more speed with this cord, but I get all the same read and write speeds of close to 23MBS.

  Any ideas why the speed is slow?  Cord? By car?

  Thank you!

  USB 1.0 MAX is 12 Mbps, which is 1.5 Mbps. (b = bit, B = byte [8-bit]).

  FireWire 400 MAX is 400 Mbps, which is 50 MB/s.

  Without knowing the specifications of the car, I guess that the "old external WD' performance is the limiting factor.

• The satellite C855 - raised average temperature and fan speed

  Hello!

  I got this toshiba Satellite C855 since March this year. It is only recently that the CPU temperature and the speed of the fans have been worrying me.

  When I'm not playing games or doing a livestream my CPU temp is about 35-40% with the regular 50% fanspeed or not on because she was cool.

  When I play games however the fanspeed is up around 66 to 68% with the central unit was 55-60%

  I was wondering if this is normal? or I have to clean it by taking it apart. If it's the second option then I'm worried because I don't want to damage anything inside. In addition, I'm not bad with the inner workings of a computer.

  Any help or information would be greatly appreciated thanks.

  In my opinion there is no reason to panic. T is the logic which is higher under stress, activity of the CPU and CPU produces more heat. Laptop needs to be cooled correctly, so the sensors that control the cooling fans sign up for increasing temperature and cooling fans run on higher speed.

  There is no reason for cleaning. And one day if this must be done please don t do it alone. You are not allowed to do this.

• After I restart my iMac and double-click on the hard drive, a pop up appears with this message: 'the 'Hard drive' file cannot be opened because you don't have permission to view its contents.'.  What is the problem?

  After I restart my iMac and double-click on the hard drive, a pop up appears with this message: 'the 'Hard drive' file cannot be opened because you don't have permission to view its contents.'.  What is the problem?

  Is the name of an external drive or internal one?

• Chromebook scrolling is jerky and hesitant

  I had my chromebook less than two weeks, I was in love, but these last two days pushed me crazy.

  Scrolling is jerky and freezes for about five to ten seconds, he does constantly seconds out.

  I use a mouse, but it was fine for the 10 or 11 days before it started. I tried to use the buffer, but it always does.

  I found on another forum someone with the same problem and they said to check applications and extensions added. I added no new, I even took a little exsiting apps that I is not enough, but it always does.

  He also said disconnect and go until invited, I tried and it was much better.

  My chromebook is an Acer, model cb3-111-c4gd.

  If anyone has hints or help, it would be much appreciated. Thank you.

  Hi croths,.

  So the step of logging in the guest account is a great first step. The underlying idea is that you wouldn't have any of your personal applications or settings loading and can isolate if the problem is related to the software (operating system or hardware). Whereas it was better, but not perfect (?) the next step would be to do a wash of 'power' that will rebuild the operating system and allow you to start over. It is fast and takes just a few minutes, but if you have personal data you want to save, you have to press this first.

  Here are the steps to do a powerwash: http://acer.custhelp.com/app/answers/detail/a_id/27685

  Next step would be to perform a full recovery of the system, you can download an OS to a flash drive and install it in your Chromebook. Here are the steps: http://acer.custhelp.com/app/answers/detail/a_id/27637

  Finally, if you still having problems I would suggest contacting support as it may be a hardware problem, that we have for you.

  Hope this helps,
  Cory

• the cursor is jerky and plans for 2004 flight simulator do not run smooth. This only happens when you run games. Is there a solution?

  The cursor is jerky and plans for 2004 flight simulator do not run smooth. This only happens when you run games. Is there a solution?

  Hello

  · What is the number and model of the mouse?

  · Will there be any changes made on the computer before the show?

  You can follow the steps listed in the link below: how to solve the pointer display problems mouse in Microsoft games: http://support.microsoft.com/kb/309703