Plug in a USB or a mobile, system is getting hung when it is in Standby Mode.

Similar Questions

• Unrecognized usb drive, restore the system image

  Replaces the default hard drive in pavilion dv7. The image backup 3 partitions for USB key and system recovery DVD creation. Put in the new hard drive and booted from the recovery DVD. Restore image dialog box does not used the disc. Available, if pilots is so those who? Or I have to download additional drivers for my USB. USB is a sea gate.

  If you have the USB hard drive plugged into a USB 3.0 ports try it switch to a USB 2.0 port.

• Aspire Zs600 Aspire recognizes plug-and-play - plug device in usb and nothing happens.

  Aspire Zs600 Aspire recognizes plug-and-play - plug device in usb and nothing happens. How to solve this problem?

  try to reinstall the Intel chipset drivers:

  http://us.Acer.com/AC/en/us/content/drivers/4531;-; Aspire 20ZS600%

  Select your operating system and download the drivers from the Intel Chipset, and install it, restart, and try again.

  or

  Press the logo windows + x

  Choose Device Manager

  Click controller series universal

  Right-click on the Intel USB controller, and then choose uninstall

  Once done, reboot and wait windows re - install the drivers

• Charger C - USB plug-and - adapter USB - C will not fully inserted

  We can insert is more completely the plug of charger USB - C OR USB - C adapter (USB - C, USB - A and HDMI).  They stopped short about 1-1, 5 mm.  Food is always delivered, but a very small movement can cause the power disconnected, even if most is still mainly in.  Data connections may be lost in the same way with potentially catastrophic effects.

  Is this a warranty issue?  It's rather disturbing if USB - C plugs/Sockets can fail if relatively fast especially in this case it's an all-Apple above adapters line and computer.

  Yes, usb ports a and c have a very known issue that no one is really writing.

  Is waved from time to time, the connections inside stops working. Also, I tested the adapter, you speak of and it heats more than all of the time and some time. Sometimes if give you him just an hour or two break and then it goes back to normal. His strange indeed.

  Also, I recommend the update to 10.11.3. There has been many corrections of bugs.

• How to enable the continuation of the Standby Option for a USB mouse: I do not see the "allow this device to wake the system from standby mode' check box__

  I use Windows XP Home Edition and I am fully up to date with the latest version of the software.

  I would like to activate my mouse USB power out "sleep mode" on my computer.  I found the help topic that describes how to do this: http://support.microsoft.com/kb/280108 how to enable the continuation of the Standby Option for a USB mouse

  However, when I follow these steps, I don't see the 'allow this device to wake the system from standby mode ' check box on any of the windows as described in the documentation for Ms.
  I use a Microsoft Comfort Optical Mouse 3000 (IntelliPoint) USB

  Any help would be greatly appreciated!

  This gives a test:

  1. click on START
  2. click on 'run '.
  3 type "notepad" (without the quotes) and press enter
  4. copy and paste this into Notepad:

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\usb]
  "USBBIOSHACKS" = DWORD: 00000000
  "USBBIOSx" = DWORD: 00000000

  5. click on file > save as
  6. change the dropdown to "all files".
  7 type usb.reg as the file name and save the file somewhere easy to access
  8 go find the file and double click it. Confirm that you want to add it to the registry
  9 restart the computer and see if you can wake the system from standby mode

  For reference, take a look at this:
  http://www.dslreports.com/Forum/r19635912-missing-power-management-tab

  Let us know,

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• all of a sudden... my computer does not see the things I plug into the usb ports on the front of the computer...?

  all of a sudden... my computer does not see the things I plug into the usb ports on the front of the computer...?

  If I shut down the computer and plug... he sees the thing then turned back...
  I can not just plug in while the computer is turned on... once again he has used to do this just as well... for some reason any, he sees things now.
  any thoughts?

  Hi KK Waddell.

  Thanks for posting in the Microsoft Community.

  I understand that you face the issue with the USB port does not work when you embedded on the front of the computer.

  Before you start the troubleshooting steps, I need the information required.

  1 did you changes to the computer?

  2 did you receive an error message?

  I suggest you to check with the other USB port.

  I suggest you to see the links and check.

  USB port may stop working after you remove or insert a USB device

  http://support.Microsoft.com/kb/817900

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  One or more USB devices may not work when you start your Windows XP-based computer

  http://support.Microsoft.com/?kbid=885624

  See also:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

• VN7 - 791G: Wifi slow and unreliable when a USB drive is plugged into the USB ports on the right.

  WiFi becomes quick and reliable whne the memory stick is disconnected. Always reproducible. Does not occur when the memory stick is plugged into the USB port on the left. Also has anyone seen this behavior?

  Wireless network adapter Qualcom Atheros QCA61x4 with the version of the driver 12.0.0.230 dated 03-2016-21.

  Thank you

  Chris

  Hello

  The explanation is simple. I'm sure that the memory stick is a USB 3.0, a plugged in a USB 3.0 port. The problem is that all USB 3.0 devices generate a 2.4 Ghz interference, as it generates interference on the frequency working on wireless. The solution is to connect the player to another port or to spend the 5 GHz wifi if your router supports. The wifi antenna is probably very close to the port and to the USB key.

  This is known for a long time, and has nothing to do with the laptop.

  There is an article on the Web page of intel who described the problem more technically. You can search if you wish.

  This causes a problem also with a wireless mouse, if the receiver is connected next to a USB 3.0 stick or any other device.

• After hybernation, all usb and wifi mobile devices does not work

  Original title: Hybernation question
  After hybernation, all usb and wifi mobile devices does not work. Similarly, it is not stop as well. I turn off the power to the network option all usb hubs. Problem however still closes. Please suggest. I have Windows XP Sp3 installed. All the drivers and the windows update is up to date.

  Hi Mirza.Shanawazbaig,

  1. what happens when you connect any USB device to the computer, or trying to shut down the computer after hibernation?

  2. do you have security software installed on the computer?

  3. did you of recent changes on the computer?

  4 when was the last time it was working fine?

  Method 1

  See the below Microsoft article and try the steps mentioned, check if it helps.

  Peripheral USB is not recognized when you attach it immediately after that your Windows XP computer comes out of standby or hibernation

  http://support.Microsoft.com/kb/871233

  Method 2

  I suggest that you download and install the updated driver for the network adapters and display on the computer by visiting the card manufacturer or computer manufacturer website manually.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

• When I plug in the USB on my netbook and you want to open, it tells me that there is no disc in the drive?

  Original title: BAD USB

  I have an Acer netbook. I was able to download my photos from my computer on a USB key until a few days ago. When I plug in the USB on my netbook and you want to open, it tells me that there is no disc in the drive?  Why does it say this?

  I am confused with this... I really hope someone can help me.

  Thank you for your time in doing

  Dido

  Hey Toni-LeeFurlotte,

  ·         Have you tried to connect to a different USB port?

  Method 1: Try to connect the USB key to a different port on the netbook and check the issue. You can also connect the drive to another computer and see if the problem persists.

  Method 2: Update of the netbook with the latest chipset drivers. In addition, install other updates of the device driver. Log in the Web site of the manufacturer to do the same thing.

  Method 3: This problem can also occur if there is a drive letter conflict. A drive letter conflict occurs if the disk that is affected by the error is mapped to a reserved drive letter. I suggest you try to change the drive letter.

  How to change drive letter assignments in Windows XP

• E280 plugged into a USB port may be bad and it fried my sansa?

  Hello everyone, this is perhaps my last posting! I am so sad and upset: I just plugged my V1 e280 on a friends computer using a sandisk connector cable I got free on a freebox (variable n ° 1) and plugged into the front USB port (variable n ° 2); He turns, and then now it won't turn at ALL.  I opened the back and took out the battery, and it was VERY HOT.  I messed up with the battery for a while and it won't always turn.  Then I plugged it in USB computer port (my friend just told me, "those before does not work") and still it won't turn.  HOWEVER, a minute or two later, always connected, the BLUE RING OF DEATH on and is always turned on, ten minutes later while the screen is still blank, until the unit is now so hot that they are almost HOT.  I put it in the refrigerator.

  So.  That's happened?  I'm f * cked?  Whose heads will roll for this disaster?  PLEASE HELP I CAN'T UNDERSTAND THIS.

  Thank you very much

  YES, I'M SURE IT IS a SANSA CABLE, it says "SanDisk" on it and is similar to my own cable.  What diff he would do anyway, the device is F - ed.  Also, it turns out that it was the old cable and not the other, although a big deal.  Any advice for me?

• PNY USB 2.0 key does nothing when it is plugged into my usb port. running windows7 home premium. Help?

  Windows 7 compatibility page shows pny 4 GB attached mini usb 2.0 drive compatible with no additional downloads necessary. PNY show instructions for loading manually driver for win 98 only. Download driver I tried the detective, no help. all of the suggestions. try to use the usb for quicken deluxe 2010 backup instead of cd

  Hello

  For this USB drivers should be installed automatically by Windows 7, when you connect the player to what messages we get as appropriate, if you open the computer to open the drive it appears as a removable device?

  If not and with only the connected USB device opened upward Device Manager (Manager type of devices in the area start search to quickly find) then open the USB Buss controllers branch, click it + and looking for USB Mass Storage Device righ click on uninstall, then unplug and plug in the USB pen and see if Windows loads the drivers ok.

  If not there yet with the USB pen connected open disk management and check if the USB key is listed as a removable drive, it may simply need to change its drive letter, change it to X, Y or Z for example.

  Some info on the disc switch letters HERE

  There may be a crisis today... my schedule is already full

• I can't use my USB because of administration system or blocking USB problem.

  Because of my ignorance in the use of some security as USB security guard software and changes in my control panel, now I can't access my USB drive or any external memory device. When I put any external memory via USB device, it is noticed that my USB guard is locked and that the system cannot perform it.so contact your system administrator. But I uninstalled all my software security completely and checked my boot settings and the bios and the problem is still there. so I can't use my USB or external memory device via USB port in my laptop. I use the Windows 7 operating system. so please help me through your friendly consultation.

  Two thoughts. Take a look at this program and see if it finds the remains of security software http://www.revouninstaller.com/ and also to see what runs in your startup using this program.
  Autoruns from Sysinternals

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  I hope this helps.

• Installed new hard drive on laptop with Windows 7 can install Windows XP on external hard drive and plug it into USB?

  Original title: Win7 Pro + HD Ext different OS
  I just installed a new hard drive in my laptop with Windows 7 Pro 64 bit.
  Would it not be possible to install WIn XP or Win 98 + older software (Win 98 or XP) on an external hard drive, then plug it into USB, laptop, in order to run old programs of 16-32 bit?

  It would be best to run Windows 98 or XP in a Virtual Machine, if you need to run older programs.

  You can use a free software such as Oracle VirtualBox or VMware Player:

  Sunny Random Ramblings: installation of Windows 98 in Virtual Box

• I get an error screen every time I plug my USB mouse on my laptop and get wat "kernel Security Check Failure.

  I just bought a DELL laptop and nothing happened in the first week of a few... And then now when I plug a 'what' USB device that is wat it appear kernel security check failure, and I was running window 8 too...

  Here the Minidump files... :D
  https://SkyDrive.live.com/redir?RESID=7526244054DEF000! 225 & authkey =! AHHbZvIw4HldflA

  OK, the NMgamingms.sys was probably installed via Windows Update.

  You can try the following:

  Open the Manager of devices, and then with the right button of the mouse optical USB > select uninstall and select "Delete the driver for this device" > OK > continue with uninstallation

  Restart the computer and let Windows detect again the mouse.

• After the repair system now get Validation error

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->
  Validation status: blocked VLK
  Validation code: 3
  Code of Validation caching: n/a
  Windows product key: *-* - 3R89F - D2KXW-VPK3J
  Windows product key hash: Ro / Y7HENE9CfW7lW + QtlNbYQEE8 =
  Windows product ID: 76487-640-8365391-23209
  Windows product ID type: 1
  Windows license type: Volume
  The Windows OS version: 5.1.2600.2.00010100.2.0.pro
  ID: {E1E586D7-D985-40D5-B72B-B417194240BE} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: Registered, 1.9.42.0
  Signed by: Microsoft
  Product name: n/a
  Architecture: n/a
  Build lab: N/A
  TTS error: n/a
  Validation Diagnostic: 025D1FF3-230-1
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a
  Version: n/a

  Windows XP Notifications data-->
  Caching the result: 3
  File: Yes
  Version: 1.9.40.0
  WgaTray.exe signed by: Microsoft
  WgaLogon.dll signed by: Microsoft

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: B4D0AA8B-543-80070002_025D1FF3-230-1

  Data browser-->
  Proxy settings:
  User Agent: Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Win32)
  Default browser: C:\Program Files\Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {E1E586D7-D985-40D5-B72B-B417194240BE}1.9.0027.05.1.2600.2.00010100.2.0.prox 32*-*-*-*-VPK3JS-1-5-21-839522115-299502267-214717958776487-640-8365391-232091MICRO-STAR INTERNATIONAL CO., LTDMS-7313American Megatrends Inc.. V1.0 20080218000000.000000 + 000CC76347F0184E0780c 090409AUS Eastern Standard Time(GMT+10:00)03109    

  License data-->
  N/A

  Windows Activation Technologies-->
  N/A

  --> HWID data
  N/A

  Activation 1.0 data OEM-->
  BIOS string matches: Yes
  Marker of the BIOS string: 13B7D: TRUE C & C INC
  Marker of OEMBIOS string. DAT: N/a, hr = 0x80004005

  Activation 2.0 data OEM-->
  N/A

  * original title - had repaired system and get validation error have an oem disk how cai I enter the appropriate key (repairman has closed the store) *.

  Hello

  It seems that the license Volume (VLK) key has been blocked. I suggest you to check the links below.

  http://social.Microsoft.com/forums/en/genuinewindowsxp/thread/cbb60c8c-0c83-4601-90b3-19a1c24cd6f6

  http://social.Microsoft.com/forums/en-us/genuineoffice/thread/6d13cbed-0e23-489F-a0f8-e4fef52659a9

  Apart from that, I suggest you to report your query in the TechNet forums to get help. Click on the link below.

  http://social.Microsoft.com/forums/en/genuinewindowsxp/

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.