Popup PlayBook come behind the screen
Hello
I m development app playbook by using the web works. The problem I m facing here "drop popups list" are behind the screen in the real device...
I don't see the problem in Simulator playbook...
Here the snap shotlaybook popup problem
Hi, have you tried to disable your splashscreen at startup? If it is not depended on splashscreen, you should make a comment about GitHub.
Best regards
Tags: BlackBerry Developers
Similar Questions
-
Satellite Pro 2100 two cables behind the screen
Hi, first post so be gentle with me please.
I have a Satellite Pro Satellite Pro 2100 and the hinges are shot, so I bought a 2100 piece to Exchange.
Everything was ok except that I have two sons that I can't find a place to plug in. A black white and they are attached to the small square gold Ribbons that are glued to each top corner at the back of the screen. The other ends have little, but when I stripped the laptop they were in bulk and I do not see where they are going.However, the laptop works fine without them.
Can anyone help please?All laptops with WLAN have this. WLAN antenna is placed behind the screen and these two wires must be connected to the WLAN antenna.
If your laptop doesn't have WLAN card put just the cables aside and everything will be OK.
-
Satellite 1800-921: antenna integrated behind the screen?
Can someone tell me if the Satellite 1800-921 has an antenna behind the screen?
Thank you
PeterI guess you mean a kind of antenna? As far as I know behind the screen is placed antenna WLAN for supported models with WLAN connectivity.
I wasn't able to find info on Satellite 1800-921, but if the unit is supplied without WIFI I guess that there is no WLAN antenna behind the screen. By the way: I believe that the Satellite 1800 series is delivered without a WLAN option.
-
Portege 4010 - brands behind the screen
Hello
I, ve just had two of them, and they all have two points behind the screen. Almost looks like mold or a spill inside the surface, they are not trademarks of electronic type (pixels dead etc.). Can I access the back of the surface before disassembling the lid or isolating this part of some kind of glazing.
considers that Mick.Hello
I can just imagine what it could be. I checked a few websites on this unit but I put t found no point. If you think that it s a hardware fault, so you should ask ASP for more information and help.
But you shouldn't t open or remove covers on your device -
I have troublle with moving my emails from the Inbox to a folder? I also extend my screens whenever it comes to the screen upward? Please help me * address email is removed from the privacy * I told my son I would have a computer on which I could get online and with a program I could throw my pearls inventory.
but when he brought to me he forgot to put windows one. He put the express window and gave me the internet. I had to go out and find free programs to do the inventory and other things. It's good, but I have trouble with the above two questions. Can someone help me?
- What e-mail program?
- What is a Windows?
- What is Windows Express?
Any window that you want to resize all the time must be the last closed window.Take the corners of the window and drag it to the format full screen. Do not use to expand. Close all other windows first via the taskbar and the latter. Windows will remember the size of the last closed window the next time that you open the program. -
I restarted my machine yesterday and now when it comes to the screen with scrolling bar (think Night Rider), it restarts in loop. Impossible to enter Safe Mode (arrives at crcdisk.sys and while it recharges) or normal startup mode. Startup Repair is unable to repair. She argues that the onus of a BadPatch.
Startup Repair shows the following:
Problem event name: StartupRepairV2
Signature of the problem 01: external Media
Signature of the problem 02: 6.0.6000.16386.6.0.6001.18000
03:6 problem signature
Signature of the 04:262148 problem
Signature of the problem 05: BadPatch
Signature of the 06 problem: BadPatch
Signature of the problem 07:0
Signature of issue 08: 1
Signature of the problem 09: SystemRestore
Signature of the problem 10:0
OS version: 6.0.6000.2.0.0.256.1
Locale ID: 1033Hello
I hope you made redundant data backups as I suspect that the drive has failed. If a PC, you must
remove all power and remove and reinstall all the cables (at both ends where possible), memory and cards. Do
not tighten, effectively remove and replace them with care.Click here for the manufacturer of your hard drive and launch their diagnosis on your drive.
By manufacturer diagnostic utilities
http://www.techsupportforum.com/hardware-support/hard-drive-support/302602-hard-drive-diagnostic-utilities.html
SpeedFan
http://www.almico.com/sfdownload.phpHD Tune
http://www.hdtune.com/----------------------------------------------
If necessary:
You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.You can use another DVD that are not protected but you will need to copy you have the product key.
On-site upgrade
http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htmIf nothing works, you can make a repair facility that must save the data but you will need to
Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
need to know your product Code.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxHow to perform a repair for Vista Installation
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.htmlNo new chances.
Rob - bicycle - Mark Twain said it is good. -
FIXED dust behind the screen of x 220
Hey guys I've had this laptop for about 2 months and today I noticed there is dust in the corners, behind the screen, im a little KNOCK and that kind of things make me crazy
any advice is very apprecated, thanks guys
-
Sometimes web error message from the client / popup that lies behind the HTML view
Hello
At times the web client error / popup hiding behind making the full background grey out and highlighting HTML display the HTML view. At this stage the actions behind the HTML code / above the screen HTML is not clickable, which forces the user to refresh the entire page (in case of a popup). Please find attached the screenshots. I tried to find if it is a known problem, but found no references linked to this document from VMware. Can someone please tell me, if there is no work around for this problem.
Details of the environment:
- Browser: Google Chrome (latest version)
- OS: Windows 2007 and 2 k 8
- vCenter: 6.0
Steps to reproduce:
- Open an extension point that contains the HTML content.
- Leave it for awhile until the point the web client session, timeout occurs (or) to disable the WebClient service / vcenter server service (Note: this one is not always reproducible.)
- Try to perform some action less content, it will display the html error message / see the popup behind the html code.
The problem of popups being hidden behind an HTML view is fixed in version 6.0.1 which was released on 10 September.
Same question as indicated previously here: problem with IFrame based HTML hosting inside Flex views
-
When I try to open the twitter/facebook etc, as sites the message that this connection is not approved appears on the screen. After some instructions another words in bold comes technical does not come from the details but "I understand the risks". What to do. Help step by step the pl
Hi Linda, can you start at the top of this discussion and see if you can identify a particular program or a device that is intercepting your secure connections?
If you want personal assistance, please start a new question and include your system information.
https://support.Mozilla.org/questions/new/desktop/fix-problems
Scroll down to the suggested items passed to continue entering in your question.
-
dust behind the screen LCD - common problem?
Hi, I recently bought a toshiba EQUIUM A60-181, and I'm
facing a problem with the LCD screen.
There seems to be a defect or the dirt behind the glass
because it blocks the light of a pixel. Any attempt of
apply moderate pressure to move this filth that has failed. I was
I was wondering if it is common with screens LCD expect a sort
I can't believe that this has passed quality of imperfection
control. Have I not justification for firing
toshiba for fixing, it is barely 1 week old?
I have read the warranty booklet and there is no mention of
dead pixel return policy can you elaborate on what is
and what is not covered by the warranty?see you soon,
Richard.
Hello
In my opinion, you should contact the Service partner. You have purchased a new product and if you see that there is something wrong, you can contact them. I'm sure that the technicians can give you more information on this issue.
-
Re: Satellite P200-13Z is on but nothing comes on the screen
When I turn on my laptop the lights come on as usual and you can hear the fan but nothing cames up on top of the screen.
Then a little light orange on the cd from the drive that lights up but I do not have a disk in itDid you perhaps updated RAM modules?
-
After RAM upgrade Satellite P100-222 is on but nothing comes on the screen
Hi all
could you please help me?I have to update my 2x512Mb in 2x2gb RAM modules.
If a module (2 GB) installed - it's ok.
If two modules (2 gb + 512 mb) installed, total RAM 2.5 - it's ok
But if two modules (2 gb + 2 gb) it does not work :(
When I turn on my laptop the lights come on as usual and I can enter the BIOS but after installation of the screen nothing cam upward on.RAM SO-DIMM 2 x 2 DDR2 SDRAM Kingston "ValueRAM' KVR800D2S5K2 modules / 4G (PC6400, 800, CL5)
Hello
These things happen usually when you try to use memory modules live not compatible.
I checked the page of Kingston and Toshiba and modules of 2 GB compatible for your laptop modes are:PA3513U-1M2G (memory 2 GB DDR2-667 Kit) or
Kingston KTT533D2 / 2G 2GB 533 MHz ModuleGood bye
-
nothing comes on the screen but I can hear the game.
nothing appears on the screen but I can hear the game, it's just a blank black screen.
Hi TiaBurt,
(1) what version of operating system do you use?
(2) game that you are trying to read?
(3) have you been able to play the game earlier?
(4) you are able to play games without problems?
First and the best suggestion for now would be to uninstall and reinstall the display updated the manufacturer drivers.
Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
Update drivers: recommended links
http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links
Retrieve information for assistance
Varun j: MICROSOFT SUPPORT
Visit our Microsoft answers feedback Forum
http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you thinkIf this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
I have two monitors and Firefox will not come on the screen.
When I try to open Firefox it will not load on each screen. Looks like he's trying to go to the secondary screen, but is not visible. The OS is Windows 7 Home first Service Pack 1. Firefox version 37.0.1
Thanks for your help.
JerryYou get a sticker or other indication on the Windows task bar that there is a window of Firefox "somewhere", but it is not visible anywhere?
If there is a tile (or a title of the window above the Firefox button in the task bar):
The Firefox window sometimes opens off screen. If you have a multiple monitor configuration, make sure that both monitors are on. Other users have reported that sometimes Firefox acts strangely while the second monitor is turned off. You mentioned that both monitors are on in your case.
In all other cases: you can often force the Firefox window is displayed on the screen by double clicking on the thumbnail image just above the taskbar and choose expand. Does it work?
A possible cause for this is that the file that stores the positions and sizes of window is corrupt.
#1 method: If you can get a zoomed window:
Open the settings folder (AKA Firefox profile) current Firefox help
- button "3-bar" menu > "?" button > troubleshooting information
- (menu bar) Help > troubleshooting information
- type or paste everything: in the address bar and press Enter
In the first table of the page, click on the view file"" button. This should launch a new window that lists the various files and folders in Windows Explorer.
Leave this window open, switch back to Firefox and output, either:
- "3-bar" menu button > button "power".
- (menu bar) File > Exit
Pause while Firefox finishing its cleanup, then rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old as well.
Launch Firefox back up again. Windows normally appear again?
#2 method: If you can not get a Firefox window for all:
Close Firefox by right clicking the icon in the taskbar > close all windows.
Using the Run dialog box (windows key + R) or search from the start menu (bar (or, in Windows 8 may bar charms bar research?) type or paste the following and press ENTER to drill down to the profiles folder):
%APPDATA%\Mozilla\Firefox\Profiles
Here you can see a folder - in this case, double-click that - or more than one case - in this case, double-click on in what looks like the most recently updated.
Scroll down and rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old as well.
Launch Firefox back up again. Windows normally appear again?
-
"Description TODO:File has stopped working" is often highlighted on the screen. Send a solution.
Hi Ezel,
1. When did you start to question?
2. did you of recent changes on the system?
You can try to perform a clean boot and see if it helps.
A clean boot to check if startup item or services to third-party application is causing this issue.
You can read the following article to put the computer in a clean boot:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.
Hope this information is useful.
Maybe you are looking for
-
I have to do a complete uninstall of my printer, because when I try to uninstall from the Control Panel, or the cd, it does not completely uninstall! Then, when I try to re - install, no icons are visible! and I am unable to view or change the print
-
I just got a Apple Watch, I bought off eBay, it looks like she did wipe out, but when I try to pair, I get to the point where he invites me to his Apple ID, she (the seller) needs to go through this process?
-
I have a pavilion d4996t on which the 15-in-1 card reader is a failure. (USB 2.0 is no longer detected by the system and cannot write on cards SD.) I want to buy a replacement but can't find documents in saying what the product number is for the 15
-
Welcome in Vista screen gets stuck on the circle of rotation (cannot connect)
Can someone help me pleeeeease! My job is at stake here... An organization of 100 employees, Vista 32 bit Service Pack 2 running on the desktop HP DC 5800, Elitebook 8530 p. Each user has own individual CAC card to access the machines. While trying t
-
Convenience store Aero says that my 'Desktop Window Manager' was disabled, so I couldn't change my themes (I also suddenly lost 'glass'). But how to activate or activate 'Desktop Window Manager' and - the most galling - why didn't he appears in the