Portege M600 - screenshot in stairs and noise

Similar Questions

• Portege M600 - nothing appeared on screen (after stopping on)

  Hello everyone, once again

  Yes, yesterday, everything suddenly I had no voice in my Portege M600. And today, I had no computer at all!

  I have no idea what is goin on. Yesterday, I've always used my laptop until about 23:00. And today, I tried to close it out around midday, but it was nothing appear on the screen. I pressed the button and the power light is on, and the light of the processor. But the light of CPU on just for a few seconds and once again off the coast. There was no noise that I use to hear when the processor is running. I leave for minutes, hoping that it will work. But it still didn't work. Then, I decided to take off the battery to shut it down, under duress.

  I tried to close again for 3/4 time. But it still does not work. Nothing appears on the screen. Just the light from the power and light of the portege symbol are on (well... as I have described the processor light is on, but for just a few seconds).

  What happened to my laptop?
  And how do I do now?

  For more information, I live in a town near Stuttgart (Germany). I googled Toshiba Service center is in Neuss, where Neuss is far from my place. And I'm on my week review now (so it's impossible to go to Neuss). So, what should I do?

  Thank you in advance.

  Hello!

  Have you tried that?
  Remove the battery, unplug the AC adapter, wait up to 1 hour and then connect the battery and the AC adapter and try again.

  If you n t have success with this you should go to an ASP. That s a hardware problem and maybe something has exchanged.

  Good bye

• Output audio Portege M600 - no device installed.

  Hello

  I use Toshiba Portege M600 with windows Vista.
  When I reboot my lap top I get not all sounds... In the status bar system, the volume icon button is marked with X and when I thought it said that "no audio output device is installed.". I tried the option just like uninstall the audio driver and reinstall. When I checked in the device under his management, game and controller I get Realtek High definition audio driver with exclamation sign. When I tried to update the driver, it shows that "this device cannot start. (Code 10) ».

  Please guide me to solve this problem.

  Regads
  Edward

  Hello

  You need to reinstall the Realtek HD audio driver.
  You can download the audio driver from the Web to Realtek site, or you could choose the page of the Australian driver Toshiba driver.
  http://www.ISD.Toshiba.com.au/71/live.dll/topic/content/driver_search.jsp

  You can find all the drivers Vista for Portege M600

• Portege M600 - Webcam driver open fail on Windows 7

  Hello

  I have a Portege M600 and already installed Windows 7 [RTM]. After that windows update works well for all material certified with Microsoft, but when I try to used by webcam, the program display an error message:
  He says 'webcam driver open fail. Please restart camera or computer.

  Then I stop and repeat until twice but nothing happened and shows the same error. I control peripheral works properly. I already reinstall the webcam software too.
  For any idea or suggestion?

  PS:
  I used the Vista 32 software as default driver

  Thank you

  Hello

  I completely agree with Akuma you should try Windows 7 beta driver for the Chicony webcam from the Toshiba page we:
  http://www.CSD.Toshiba.com

  But do not forget that Windows 7 isn't out yet so it s a little difficult to get drivers tested for it.

  In addition, it would be interesting to know if the same thing happens with the factory settings.

  Good bye

• Portege M600 keyboard & Touchpad not working not

  Hello

  I have an M600 (PPM60A), I recently did an upgrade from Vista to Windows 7 (not an update own) a few times (?) A week?) After updates in line required, keyboard & touchpad no longer works, when it is connected to the docking station.

  All is well by using an external keyboard & mouse wireless.
  I tried "F9", even trying to reload the Synaptics Touchpad drivers from the Web from TOshiba site - it gives the message - Syn TP... Installation failed.

  Anyone has any suggestions or do I now has an "office of low power!

  > after updates in line required, keyboard & touchpad no longer works, when it is connected to the docking station.

  Have you tested the laptop without docking station?
  What about new OS install? Have you tested if the keyboard and the touchpad works after recovery again?
  Do this!

  PS: the Portege M600 is not portable low power it s a business class specifications and belongs to a series of notebook better.

• Portege M600 is does not start

  Hi, I have a PC laptop Toshiba Portege M600.
  Yesterday, it happened all of a sudden my Media Player got suspended and so I pressed the power button to turn off the service and then try to restart it. When trying to restart, its display Windows XP screen continuously without going forward to the Login window.

  I tried last good Configuration also known from the Safe Mode, Mode safe mode with networking. But in none of the options, it worked.

  Please help me to start my laptop.

  Have you tried to boot from the recovery CD and reinstall the OS again?
  I think that this should be checked permanently.

• Can Portege M600 - I put the CPU?

  Hi guys,.

  My laptop is Portege M600, and the CPU is:

  Intel Core 2 Duo T5450 at 1.66 GHZ.

  My question is, extensible processor in my laptop? If so what CPU fit my machine?

  Thanks in advance.
  Mohammed

  Hello

  Let me give you a piece of advice: before you start a new topic, you should somewhat serach using the search function of the Forum. This question was asked 100 times, I think, or more.

  However, Toshiba doesn t CPU update laptops and you will lose the warranty. The motherboard and BIOS are configured for CPU preinstalled and no one is able to tell if it s support another CPU or not.
  Here you can get more information: http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm

• No audio output is installed in Toshiba Portege M600, for several times! Help, please...

  HII,

  I have the Toshiba Portege M600 with Vista Home Premium 32-bit SP.1. It is about 3 years old now. This for 3 months, I experience "no audio output device is installed" repeatedly. The first three times that I feel it, it's solve by doing:
  -Run-> service.msc-> restart audio windows (first occurrence; problem solved with this method)
  --> Device Manager disable and then enable the controller HD audio (second instance; problem solved with this method)
  (- Installed realtek third occurrence; problem solved and last for a month)
  Yesterday again I have another occurrence of this problem. And this time, none of the foregoing strives to solve the problem. Now, I'm a bit desperate. Is he someone ever lived the same thing? I will very grateful if you are willing to share or have any suggestions on what I should do...
  Thank you in advance!

  RIA

  Hi Ria,

  You can try to install Windows Vista SP2 and check. Vista SP2 will strengthen the stability and performance of the system.

  You can consult the following articles and check.

  Learn how to install Windows Vista Service Pack 2 (SP2)

  How to obtain the latest Windows Vista service pack

  Hope this information is useful.

• Start of satellite L10 fan speed and noise

  My L10 cooling fan start always maximum speed, when it turns on it always burst at maximum speed (and noise) and then slow down to a speed (and slient relative). This fan start noise is very annoying (as fan departure every half hour in office work and every 15 minutes in some simple games).
  I try muffler or bios settings performance they do not fix the noise and the starting speed.
  Maybe Toshiba could release some bios update or patch or something to fix this? (my bios version 2.0)
  Maybe this problem has the solution software thrid party?
  Or the fan speed max is just a hardware problem?

  Thank you.

  Hello Albert

  The same thing my Qosmio F20 and in my opinion, it is not any kind of technical problem. At the moment I'm typing this text and hear Internet radio at the same time. The cooling fan works regularly.

  In my opinion, when the operating system runs several different processes running in the background and they need the CPU activity that needs to be cooled correctly. In my opinion, you should check the power settings management settings and change the performance of the processor to lower the level.

  If the cooling fan runs every 15 minutes, in my opinion, it is not too often.

  Good bye

• F55 low light bands and noise

  Need help.

  We have some problems when shooting in low light.

  http://antosch.dyndns.TV/owncloud/index.php/s/mKOEqbsXQrwFVSn

  You can see bands and noise in the viewfinder and screen on board as well as on the pictures.

  Also more brightness also enhance the effect.

  The parameters are:

  AE Slog3 movie

  MPEG 25 1920 x 1080 p

  Exhibition index 3200

  MLUT LC709 Type A for the viewfinder and SDI

  
  

• Possible bug in sv_Harmonic distortion and Noise.vi

  Hello

  I ran into what seems to be a bug in distortion and Noise.vi sv_Harmonic

  I call this VI into a higher level VI which is part of the box sound & Vibration tool (SVT SNR without harmonic (time) (1ch) .vi)

  What is happening is that I sometimes get error 0xFFFFB1A3 (-20061):

  Error-20061 occurred at NI_MABase.lvlibine Waveform.vi:22 > NI_MABase.lvlib:ma_Trap Fgen parameter Errors.vi:1
  frequency must be<= sampling="">

  Possible reasons:

  Analysis: The selection is not valid.

  This error is actually produced in distortion and Noise.vi sv_Harmonic by one of his subVIs (your unique information (complex) .vi svc_Extract) although I'm not able to activate debugging for this VI so I can't dig deeper.

  What seems to be the case, it is for certain fundamental frequencies that result in higher order harmonic which is located very close to Fs/2, you get the error.  I have attached a waveform and a simple VI that generates the error.  My debugging, it seems that the error occurred when the code attempts to extract the harmonic at 5119,53 Hz.  FS/2 is 5120Hz, so it must be valid, but generates an error.

  Thank you

  -mat

  Hey Matt,

  I spoke with R & D and the source of this problem is we're detects peaking at exactly the Nyquist frequency for the 127th harmonic, while it should work, we get the false error. To work around the problem, you can specify the frequency range of 0-126 harmonics as seen in the image below.  Have one less harmonic should not be a big problem as the harmonic 127th is anyway in the noise.  R & D is now aware of the issue and look forward to it.   Thank you!

  

• Dumpsters and noise in audio and video players

  Hi, all my audio and video players in the laptop, the present jump (interruption) and noise, while playing, can someone help me please?

  Hi Sergiorey,

  This problem can occur if the device controller or audio sound card is out of date.

  I suggest you to see the following link for more information.

  Play an audio or video file: frequently asked questions (what can I do on the audio problems, such as popping, crackling, or sound that plays too fast or too slow?)

  http://Windows.Microsoft.com/en-us/Windows7/play-an-audio-or-video-file-frequently-asked-questions

  Post us the results once you try the steps above.

• grain and noise

  Feeling discouraged this morning with a box full of rejections.  The reason to reject this photo was grain and noise.   I am perplexed, because it was shot at a relatively low ISO and seems fine on my iMac.  What do you see?

  @Ruth Bergen Braun,

  Thank you for writing and sharing your photos. I think that we could get this one wrong. I checked the file at full resolution and it looks great to me. I cancelled the rejection and upload the image. Keep more content coming soon!

  Kind regards

  Mat Hayward

• How can I remove grain and noise of my "rushes". video was filmed during the night with poor lighting and a digital SLR

  grain and noise reductiom

  As already suggested, video Neat.

  https://www.neatvideo.com/

  Embarrassing bad web site, very good product.

  Don't forget that in addition to the expense of the plug-in, noise reduction is a very intensive rendering process - and so you have the payroll to the supplementary budget to make files.

  Do a test on excerpts and see if it works well enough for you.

  If so, edit without making the noise reduction and, once you have the material cut down to just the sections that need a treatment, do your the noise reduction on all this material.

  MtD

• Heating and noise problem laptop while streaming

  If I open several tabs of youtube. And online streaming. I noticed intense heat under my palm and noise. I also notice jumps high processer in the Task Manager. A couple times my machine stops, too. (probably due to heating of the processor).

  To avoid this situation that I should get more RAM? Currently I have 1 GB. And running Windows 7 on my Lenovo N200 0769.

  Any help or recomendatiosn will be appreciated.

  Thank you.

  Search for dust accumulates on the radiator cooling fins.

  Located under a Panel on the bottom, blow out with

  compressed air or using a soft bristle brush.

  And more ram (2 GB total) can't hurt!