Portege R500 software fingerprinting and

Similar Questions

• Error installing software Portege R500 to fingerprints under XP

  Hello, I install XP on Portege R500 and all the drivers from the Toshiba site. After installing the software of fingerprint AuthenTec worm: 1.1.11.8 and restart error of: fingerprint identification system TrueSuite Access Manager:

  EventType: BEX P1: P2 FPManager.exe: 1.1.11.8 P3: 471317a 0
  P4: FPSuites.dll P5: 2.2.13.19 P6: 4733c92a P7: 00003628
  P8: c0000409 P9: 00000000

  Do not send

  I'm trying to install the driver without software but it's impossible.

  Thanks in advance.

  Hello

  Have you installed the following things all enforcement facilities contained in the Instructions of facilities?

• Portege R500 fan turns and freezes

  Hello

  I have a Portege R500 running windows XP. I seem to have problems with the fan turns very quickly upward and the laptop then freeze it. It sems happens especially when I remove the Cat5 network card and turn on the wireless network card. Toshiba have replaced the Module of cooling for me. I don't know if the problem is hardware or software, the problem sometimes at random, but as above especially when you remove the Cat5.

  Any help would be appreciated.

  Thank you

  This Toshiba recovery image or self created image this image that you use?
  If you have noticed this problem with own laptop preinstalled (Toshiba recovery image) I don't think that it is software issue.

  Did you speak with service days? I mean they should have enough experience with this model of laptop.

• Portege R500 - software of WinDVD and DVD writing

  We bought a lot of R500 notebooks and put our brand image on them, but I can't find the software WinDVD or writing software of DVD on the DVD provided with the machines or on the download page. Are they available? We do not want to use the image that comes with the machine, as it has too much pre-installed software.

  Thank you.

  Why ask you the same thing for the second time?

  Please check you first thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=31764&TSTART=0

  Good bye

• Portege R500: Profile Migration and a problem with the utility of fingerprints

  Hello, here have done an upgrade of Windows (Vista to 7).
  To be more precise - I installed x 64 version, so I had to do a clean install.
  After the instalation I partially copied my old profile to the new structure.

  When I'm trying to enroll fingerprint for the prints stored on the old system there is an error that already exists in this schema, but store the new works correctly. I am not old fingerprints for the management, or export them - it is possible to clean this memory of the tools?

  See you soon,.
  Radek

  Hi hcsradek,

  try to clear all of the fingerprints...
  remove all visible zeros and restart...
  If you're lucky, the other stored where went too!

  I don't know if a tool exists to make this work...
  If anyone has such a tool which can only be a servicepartner...

• Portege R500 - Upgrade processor and RAM

  Can I put in my proceror R500 and RAM?
  Is possible? If Yes, how can you procesor I used?

  Robert

  Hello

  You can upgrade the RAM.
  You can use the DDR2 667 MHz (PC2-5300) or 533 MHz 200 - PIN SODIMM modules.
  You can use a 1 GB RAM module this is the max!
  There is also an internal RAM which can be removed if only one slot is expandable!

  With regard to upgrading the CPU.
  Usually it s not advised to replace/upgrade of the processor because the BIOS has not been tested with other processors

• Portege R500 - CPU jump and stick to 100%

  I had a problem with my laptop for the last 6-8 weeks, and it would be great if someone can suggest a possible cause/remedy.

  I have a 10 month old toshiba R500 protected (processors Core 2 Duo 1.7 GHz, Intel GMA graphics, 2 GB of ram, 120 GB HDD, Vista)
  It was useless. I already had 2 discs and a new hard drive.

  The problem seems to arise every 2-3 weeks between episodes of the laptop works very well.

  What is happening is the CPU at least 90-100% and stay there for between 2 and 10 minutes.
  Of course, this slows down the computer, but it never breaks down.

  I tried to refine what is the cause, but this happens when two itunes. Outlook or IE are open and arrived with them all open, or open one at a time. This has really left me stuck for what might be causing this and other suggestions of people to another too many open windows, too flash, etc. were not much help because of the many culprits.

  This happened only with itunes open on its own.
  This seems to be the most frequent cause, especially when playing music or sync an ipod/iphone.
  I have all my music on an external drive that could possible was a factor? who knows?

  I managed to note the below information from the Task Manager:

  Process window:
  ITunes is to 36 in the CPU column with 110,00 k in column memory

  Window of performance:
  CPU: 100%
  Memory: 1.24 (of 2g of memory)
  Pagefile: 1815/4313

  If anyone has any suggestions as to what I could try that would be great. People suggest the factory resets and try xp and not vista so much, but if there are other suggestions out there I'd love to hear them!

  See you soon

  > That persists after a reboot, reboot takes about 20 minutes.
  The restart should not take longer than 2-3 min in my opinion, that your operating system is simply confused upward

  I've seen other discussions about the BISO update and it seems that this problem is related to the operating system that you are confused.

• Portege R500 - DVD is no longer working

  Someone at - it ideas why my DVD drive has stopped working?

  I have a Portege R500 - 11 c and in Device Manager I have a yellow exclamation mark against Bus USB controllers / USB Mass Storage Device
  When I click through for more details, he said:

  Location: Port_ #0004.Hub_ #0005

  "This device cannot start. (Code 10)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

  Search for Solutions has the answer.

  It is strange because it is power to the player, when I put a disc in I can hear him pull up, but it becomes visible to the machine!

  Pointers would be useful.

  see you soon,
  David

  If a yellow exclamation point appears in the device, close the USB hubs\controller Manager, then a USB driver problem would be possible.
  In most cases, a new installation of USB might help to get rid of this annoying problem of USB.

  -Remove and disconnect all external USB devices that are connected to the laptop.
  -Go to the Device Manager and remove the USB hubs and USB controllers.
  -reboot the machine.

  New OS reboot should reinstall USB drivers, and the operating system should recognize the USB ports again. After this short intervention, connect the external USB CD. DVD player and check if it would show up in my computer

  Good bye

• Portege R500: Fingerprint Software and VIsta SP1 problems

  I encounter another problem which seems to be related to the fingerprint software. If I install the software, no issue arises. Once I register the fingerprints, the system slows down. Same clang of the other computers in the domain, in that I am, the response slows down gradually and then fails several times, before becoming inaccessible.

  Then as Exlopre crashes after a while. If I can stop the command, it hangs at the screen bright blue vista saying "logout". Then, the only way to turn off the computer is by holding down the power button.

  I log back in again once, unregister the fingerprint and all works well.
  Any idea? Thank you

  P.S. The software and drivers Vista SP1 and Toshiba are fully patched/updated

  Hello

  I am interested in your question, you are connected to a domain and use the fingerprint software in the network?

  Well, how it works in the Working Group?
  Have you noticed the same slowdowns system using laptop computer not connected to the network?

  Please check this because I guess that there is local connection between domain parameters (server) and your stored settings on the R500.

• Portege R500 - fingerprint reader and SD card reader does not work

  Hello

  I hope someone can help me.

  I bought an opportunity Portege R500 (the warranty is still available until 12/2010) and set up with Windows 7 Home Premium.

  I installed all the drivers for Windows 7 from the specific model support page. Driver Vista have been installed for all drivers, which are not available in Windows 7.

  If everything works fine, except the fingerprint reader and the sd card slot.

  Fingerprints: I tried al a lot of drivers, even that of the R600 and R700 (such as proposed by someone here in the forum). When I run the Toshiba fingerprint utility, a text box tells me, that there is no connection with the sensor. Authentc software does not work either.

  SD card reader: I tried several SD cards from a card SD 2 GB simple and old (but functional) Kingston. According to the Director of devicce, the driver is correctly installed and running.
  The blue icon next to wireless light turns on and after a "long", a message box appears and asks me to format the card. It takes a little longer and then I get the massage, the card cannot be formatted. I tried the same procedure with a SDHC card 4 GB and a Micro SDHC card in a SD card adapter. Then of course the cards are identified but not usable and formatted.

  There are several reports of other users of the internet, the locations of sd card in computer models laptops different toshiba have problems under Windows 7.

  The two problems have emerged as well under Vista. My hope was, this upgrade to Win 7 solve poverty. Unfortunately remain the problems of th I have Win 7.

  Thanks in advance,

  Michael (Germany)

  Thanks for the feedback second
  By the way; It is a forum for user to user in this community, everyone is trying to help everyone, so if someone wants to say that he would be able to help, then you will get a response from such user maybe you should also pass a few simple threads in this forum and might help other users as well?

  Tip; BIOS update and setting BIOS by default (with F9) can solve many problems... it's worth a try...

  By the way; Win 7 is able to update the drivers automatically. I recommend that you run an update in Device Manager and let windows search for the update.

  I ve got another laptop and installed Win 7 as well. The card reader Vista driver has worked for me on Win 7 OS just a tip

• Portege R500 - is not reading DVDS and software of DVD writer?

  We have a few notebooks Portege R500 and put our brand on them image very well.
  I can't find the DVD playback software and the software editor of DVD on the download site, is it available? It comes pre-installed on the computer, but we do not want to use the image it comes with.

  Thank you

  This additional software is only part of the image of Toshiba and can be downloaded from the Toshiba driver page!
  If you want to use the software if you need to buy a version full or you will switch to the image of Toshiba.

• Problem with the TrueSuite Fingerprint on Portege R500-121 software

  121 - R500 new with Vista Business. After two weeks of evil, I realized that the failures of synchronization of offline files resulted from the fingerprint software. The only solution is to uninstall Truesuite, therefore not fingerprint authentication if you want threads in offline mode. How Toshiba can ship a laptop with software that one of the most important operating system for peat mobile users have?

  Already checked the Drivers Toshiba download site if a new version is available? Maybe there is a new version that fixes this bug.

  If not, I would check the microsoft Web site, if there is no case known, so maybe someone has a out some correction or similar.
  I wouldn pointing with your finger to toshiba, first of all, because it's definitely a software error and there are probably more manufacturers of portable with the same fingerprint sensor that may have the same problem.

  Welcome them

• Portege R500 - start of fingerprinting release

  Greetings.

  I have a problem with my Porteg R500 with HARD drive. I activated the "Single Sign on" in order to use my fingerprint only once a boot, the heading "Power Pre-os by fingerprints" (TrueSite Access Manager software).
  When I turn on my laptop, after the BIOS check, I wonder to slide my finger on the sensor. I do, but the system hangs upward, with the screenshot of software TrueSite still. No way to use the keyboard (without CTRL-ALT-DEL allowed; if you press CAPS LOCK, SHIFT, there no led lights, etc.), and he remains hung up that I've shut it down by holding the power button.

  Anyone know what's the problem? My BIOS firmware is updated (version 1.60)

  Thank you.

  Hello

  Has this issue been published since the beginning? I mean from day of purchase?

  In my view the OS and Access Manager software TrueSite is confused upward.
  Who knows why, but I think you have to use your Toshiba recovery disc and put the laptop to the factory setting.
  Then update the AuthenTec fingerprint software.

  Then, you can follow with the configuration of the fingerprint as described in the help of AuthenTec.

  I think you should check this!

• Portege R500 Fingerprint Utility not recognizing Win 7 password

  Hello

  I have Toshiba Portege R500 with Windows 7 Pro connected to SBS2008 field. Some time ago, I changed my password of domain, utility prints password digital (FPU) asked for the password, but after that I put it it says that the password is incorrect.

  I changed the password and reinstalled the software, still does not. It seems that the FPU has no access to the Windows password or remember the old password. Help, please.

  Best,
  D

  Hello

  I got this Toshiba FAQ on the fingerprint and the question of password field.
  http://APS2.toshiba-tro.de/KB0/TSB0702ZC0000R01.htm

  You don't know if this could help you but try to install the latest Toshiba Fingerprint Utility of the Tecra A11.
  Maybe it helps good luck

• Portege R500 - utility of fingerprint stopped working

  I have a laptop Portege R500. The utility of fingerprint stopped working. First (perhaps after an update of the real Suite Acess Manager was installed a few months ago) it did not work when connecting, but worked for the other passwords.

  Now it doesn't work at all. If I try to record fingerprints, told me that he has failed to locate the sensor. I reinstalled the driver AES1610 and TrueSuite access manager, but it makes no difference.

  In Device Manager it says the device is working. I looked at different threads on this without seeing something that works.

  Hmm, maybe you should try to clean the registry once the fingerprint software has been uninstalled.

  In your case, I would follow this:
  -Uninstall fingerprint software and remove the fingerprint device in Device Manager.
  -restart the laptop
  -clean the registry using the free tool called CCleaner
  -Restart once again and install the software and driver
  -Restart once again and test the functionality of fingerprint

  Welcome them