Portege Z20t - B - 10 c have to reboot the router WLan

Similar Questions

• How to reboot the router WAG120N since the web interface?

  Dear Sirs,

  How to restart my router from linksys WAG120N router page itself? The page of the router shows that nothing is very little helpful.

  I manually get up and turn off the router and turn back, which is a huge turn off.

  I tried to register on the linksyssmartwifi.com site, but it says error given attached screenshot,

  pls help

  RAMU

  Dude,

  I want to know how to reboot the router to my computer itself?
  do not know how to reset to the factory settings,

  RAMU

• have to hit the router works for a connection

  Since I'm router not all wireless connections in the office laptops and Xbox fine except for an old laptop to connect, I have to hit the router and the

  Hello

  Look for the updates driver WiFi (wireless) of the computer with the system manufacturer
  If integrated and, if the device manufacturer a separate device.

  Also check the website of the manufacturer of the router for firmware updates.

  Is this computer located at a distance from the router or are there obstacles on the way?
  Try to close the laptop as a test - but not too close, usually 6' away or almost.

  I hope this helps.

• Unable to connect to the internet; need to reboot the router every two hours

  Hey I know a lot of people have it, but I have to restart the router about two hours, because it bugs and I can't connect and I have to restart every two hours. Any suggestions?

  Original title: bug in the router

  You visit router manufacturers support and see if it is set to update firmware

• Router WRT160N v2 lose wired connections have to restart the router, then all is well again.

  Hi all...

  I'm having some trouble with my WRT160N v2 router, now I use it only to share the internet connection between wired PC.

  I have tride (with the help of live chat) to reduce the size of the MTU to 1300, with no success, also an update of the firmware was informed, but I can't find an update for the version "v2" of the WRT160N router.

  The behavior is really funny:

  -Get random msgs "cable network is disconnected" and "local network connection is now connected".

  * plugged direct cable from my modem to the PC then there is no problem, me makes me believe cables are ok

  -Some sites don't be loading not on two PCs connected to the router, Firefox and IE8 trough during live chat, confirmed the site is up, it's as if something is stuck in the cache of the router or something that prevents some loading sites, sites that happen are random, the browser are not even a real attempt to connect but go now empty.

  -Repair windows and hollow EasyLink advisor will have no effect, Easylink advisor indicates that the connection is good when it doesn't appear, restart the router is always fix the problems (for a while)

  Modem: Comcast Cable

  Router: WRT160N v2

  PC1: XP Pro SP3 connected cable trough using Avast 4 Pro Security

  PC2: XP Pro SP3 connected hollow cable using Outpost Security Suite Pro 2009

  It's very frustrating because you can imagen, I hope someone got some clues for me on this one...

  Thanks in advance...

  Martijn greating

  It should list version 1, 2 and 3, when you go to: http://www.linksysbycisco.com/US/en/support/WRT160N/download

  Here are the instructions to DOWNGRADE the WRT160N V2, DO NOT USE this on VERSION 1 or 3, it will turn your router into a door stop!

  http://audipages.com/router/

• Internet connection sometimes has a yellow! above and sometimes disconnects, and I have to restart the router?

  This has happened recently. I have no idea why.

  Hello

  ·        You did changes to the computer before the show?

  ·        What operating system is installed on your computer?

  Method 1: I suggest to let flow network troubleshooting and check if it solves the problem:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2: I also suggest you to update the network adapter driver and check if it makes a difference:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Reference: Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

• Hi I have a problem to connect on wifi I have reset all the setting ang simultaneously press the home buttom ang poewr but not wrking buttom, I can't and on the router because I was on a public area as hotel thank you

  I have 5 16 g model A1428 phone

  FCC ID * A IC * A IMEI; ***

  I TRY TO OPEN MY PHONE TO CHANGE THE BATTREY AND REMOVE THE LCD CABLE TO CHANGE THE POWER ON SWITCH, BUT UP TO THAT ONLY TO REMOVE THE LCD SCREEN, I GAVE ALL MY BECAUSE IS DIFFICULT... WHEN I PUT I CAN NOT CONNECT TO WIFI.

  I TRY to RESET all THE SETTING or RESET or PRESS TOGETHER HOME BUTTOM AND POWER SWITCH ONLY MARKET THE ROUTER NETWORK I can't DO it BECAUSE it OF in CRUISE BOAT or in public space...

  Thank you!

  ALFREDFROMTAGBILARAN

  < personal information under the direction of the host >

  Please do the following and after each test to see if the problem is resolved - if yes, then you can omit the following steps - I tried to list them in ascending order of the effort at least on a Mac and / or an iDevice

  1. Check if the problem is related to a single device and if other devices connect normally-
  2. If the answer 1 is 'yes' - try to connect the device assigned to somewhere else if possible - coffee or the University
  3. Please see recommended settings of WiFi routers and Apple access points
  4. Perform a forced - restart cela do not delete or purge all data and allows to solve many problems - here is how - press and hold the Off / On Home button and at the same time for about 15-20 seconds, until the Apple logo appears. Allow normal startup upward.
  5. Settings - WiFi - < network name > - Click on forget network - do a restart forced 4 and then again add the network
  6. If home - reboot the router by unplugging it for 60 seconds (power) and the plug and reconnect - obviously, this step can be done in a public place like a cafe or airport or University. While you're there - make sure your router is working on the latest firmware (check manufacturer's website)
  7. Settings - general - reset - Reset network settings - remember to have very practical WiFi passwords because it erases the WiFi passwords
  8. If it is a new specific net device in your home - make sure that the router gives enough DNS for all numbers which must / wants a connection - stuff like the printer, Chromecast get overlooked - ask for more details on this so not sure option
  9. Backup the device to iTunes - restore as NEW (no backup) using iTunes - see if solves problem - if yes - restore backup
  10. An appointment of 'Genius' to an Apple Store, or select another authorized service provider.

• Portege Z20t-C-121 screen does not automatically turn into tablet mode

  Hello

  We bought a Portege Z20t-C-121 to test as a replacement for some of our leaders. I have built with Windows 10 company and installed all the drivers latest on the Toshiba site. A WiFi Intel driver did not work properly so I downloaded and installed from the Intel Web site.

  The only thing that I can't work seems to be the automatic rotation of the screen; When I dock the screen to use as a Windows Tablet detects this and goes into tablet mode, but however I turn the screen remains in the same landscape as it was when it was docked.

  Name of the operating system: Microsoft Windows Enterprise 10
  OS version: 10.0.10586 n/a build 10586

  Can someone tell me what I need to do to get this feature works please?

  Have you installed the drivers Win8 or Win10?

  Have you installed the driver system of Toshiba and Toshiba system settings?

• Portege Z20T: Screen gets scratched by almost anything

  Ciao!

  I own a Portege Z20T B - 10 c which is a pretty nice machine, but has an embarrassing flaw: the screen is scratched by virtually any contact. For example, I can't use the "pen of emergency" for the touch input or write on the screen, because it causes scratches. In addition, the screen has already collected a series of scratches shaping the contour of the touchpad, is supposed to be produced when the laptop is closed. So you can't really use the laptop, how it should be used, and I fear that a few months from now, the screen will be filled with stripes.

  While I'm waiting for my laptop store decide whether a case of warranty or not, I wonder if anyone of you has this template and it has encountered the same problem?

  See you soon,.
  Stefan

  I have exactly the same problem. I only use the machine since July and already it's enough damage. Basically, the screen is rubbing against the dock and I the footprint in the sketch of the touchpad. I fear that they will soon be damaging the images captured by the camera since the outline of the Tablet are right on the lens.

  
  

  Toshiba is reluctant to fix it so far and I've included the response of my rep account below. Frankly, I was shocked because it is such a costly computer and the cause of the problem seems so obvious. I was also disappointed that they do not consider this thread to assess my case since it is the first result when one Googles 'portege striped screen.

  Hello Eric,

  I sent to your email with pictures of your computer laptop scratches to the screen. They responded by saying that the stripes are not due to a manufacturing defect, and there has not been an another other touchscreens Z20t reports get scratches like that on the screen, so there is nothing they can do to replace it. Our Customer Service Manager will usually just make the call to replace him, if the laptop is with the first 90 days, which is 2 and a half months after the normal return policy. He was not able to get permission to replace it.

  I'm glad that you were able to get this phone back operational. Please keep this practical Business Technical Support number for future needs, that I hope that you don't always have to use it in the future. Please give me a call if you have any other questions in the future.

• Portege Z20T - B - 10 c - support in Ireland

  Hello world.
  I recently bought a PORTEGE Z20T-B - 10 c. I'm pretty happy with it.
  I came on line today to buy an extended warranty and it seems that none of the listed resellers/partners actually sell in my country (Ireland).
  Not much, I'll reach out to Toshiba, I thought.

  Unfortunately, the phone number on the site of Toshiba Ireland support goes to a fruit and veg shop, the pages of "procedure" (and many others) is broken and gives a 404 error. The only support is from that annoying little living person who is not supported as she tells me to call support. Unfortunately, there is no real number.

  Toshiba Ireland on Facebook just ignore my messages and I've been through almost on every page on the site looking for information of contact without result.

  I don't actually need support right at the moment (other than knowing where I can actually buy an extended warranty), but it dawned on me that if I finally find a way to buy the warranty, I wouldn't be able to use it because it is impossible to connect to any kind of support request.

  It seems that these forums are just peer supported also.
  Thus, Toshiba have no support at all? Or they rely on third parties exclusively?
  If they rely only on third parties, someone at - it recommendations for what to do when something goes wrong?
  This has been a surprisingly frustrating experience so far and I'm still not in a stressful situation to still need support!

  Any advice would be much appreciated.

  Dave

  Hello

  Not very well why you could not access the Ireland of Toshiba 'extended warranty' correctly, but now the site seems to work well:
  http://www.Toshiba.IE/services/warranty-extension/

  I recommend you to check again.

• Portege Z20t - b GPS no work

  Hey can not get my post with bing maps, maps, oder mapfactor, even GPS information browser Apps can't see the position when the WIFI is turned off.

  I bought this Stand Alone GPS features.
  8.1 update win the latest updates. Still no location in APPs.

  GPS is enabled for Windows 8.1 settings, I allowed the applications to use the gps/position.
  All Toshiba service updates are installed. Even with a SIM CARD, I have no GPS.

  Only in WiFi, I get a job...

  Back so it is damaged? BTW must work tomorrow by car around the world. When his does not work I have to return it.

  Tested cards und windows and mapfatorGPS maps application here.
  none gets a difficulty when the WiFi is turned off.

  In the description of Portege Z20t-b-xxx, "Assisted GPS" is mentioned.

  Assisted GPS is part of the 3G module... so it should work using connection 3G too.

  Have you tested it?

• Portege-Z20t-B-10 c-SE - question of material specification

  Hello, after using the Lenovo x61t for more than 7 years, it's time to find a new.

  The z20t seems to be the only one that fits my needs:
  * convertible
  track stick
  * at least full-screen HD (and not a mirror!)
  * VGA
  * native (!) Ethernet

  The only drawback is the small ssd (max. 256) and this is only HDMI 1.4, no 2.0 (CPU throttling) or Display Port for 4k@60Hz

  Then, I stumbled upon a Z20t-B-10 c-SE with a 500 GB SSD! Is this true or a fake? Yesterday, it was listed with 16 GB of RAM, today with only 8 GB of RAM.

  If I'm allowed to dream, I would add these to the z20T:
  (* the third mouse button for the score for the scroll button (this is something that I use almost everytime))
  * Maybe put 16 GB of RAM of the laptop
  * 2.0 HDMI or Displayport - this is itself resolved via an upgrade to Skylake which provides HDMI 2.0
  * Having PCe-Lanes (it would be enough) in the dock connector

  The last of them allows to have several variants of keyboard:
  * one that is offered today
  * one with a slot ExpressCard (player additional cards, several USB ports, TV cards, special Internet cards, etc. data acquisition interface cards)
  * one with an ExpressCard slot & second SSD/HDD bay (for example a "cheap & really big HARD drive")

  Extra, a 'small & tiny' each gramm is important to people for whom might be nice (I'd rather the 'standard' that comes with the lot on z20t lowercase which comes with many other paintings)

  Who are my thoughts.

  "Dreams" sounds good

  -Mouse extra 3rd button... Well I never demanded this button on my touchpad... so this button would be useless for me...

  -16 GB of RAM... certainly big YES... but unfortunately this Portege Z20t - B - 10 c supports max 8 GB RAM... This limitation appears because of the chipset/CPU

  -Espress Card slot is can be a feature of nice to have, but I think that this kind of interface is already more or less declining...

• All of a sudden freezes and then don't download anypage, have to reboot to work

  I'll be on a view and it will be freeze.then I x it out and try to reopen and it won 't.it don't reopen Furgol, at the bottom, it shows an empty site, you know how when you reduce a site and it shows a little ba attesting that the view was minimized.wel there than bar here but it is totally white. If to get rid of it I found reboot.and that when I reboot everything then works fine. But I shouln t have to reboot it everyonce in a while.
  If can please tell me what the deal is if you know.
  God bless
  Trish

  Is there any pattern to the gel? If it seems to be related to Flash, you can consider disabling the new mode protected in Flash 11.3. See this article from Adobe support under the heading of 'Last resort': Adobe Forums: how to fix protected Flash Player for Firefox mode?

  In addition, to avoid having to restart Windows, you can try closing Firefox using Windows Task Manager.

  Press Ctrl + SHIFT + ESC to open the Task Manager

  If Firefox is on the Applications tab, go ahead and put highlight and end task.

  Then, look for the tab process or for the next two and complete the process on each:

  plugin - container.exe
  
  Firefox.exe

  Then you can close the dialog box and you should be able to restart Firefox immediately.

• My wife tried to update firefox and since then it will not open. When I click it a window appears and says that I have to finish the upgrade a previous version by restarting. When I reboot nothing changes.

  My wife tried to update firefox and since then it will not open. When I click it a window appears and says that I have to finish the upgrade a previous version by restarting. When I reboot nothing changes.

  If the files have already been downloaded, then delete the files in the folder updates\0 and updates.
  
  You can also remove active - update.xml, or even updates.xml (stores the history of update).

  • http://KB.mozillazine.org/Software_Update (Update works not properly)

  C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
  (%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox)
  

  Do a cleaning (re) install and delete the folder of the program Firefox (C:\Program Files\Mozilla Firefox\).

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html

  Uninstall your current version of Firefox if possible.

  • Do NOT remove the data of a personal nature when you uninstall the current version or you lose your bookmarks and other data in the profile folder.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• Just upgraded to El Capitan. Now my MF4350 (USB) will not be printed. He maintains a break himself. I have tried reboot, power, re - install drivers, etc.. Suggestions?

  Just upgraded my MacBook OS to El Capitan, 10.11.3 iOS 2009. Now my Canon MF4350's (USB connection) will not be printed. When I try to print, it says 'Printing' and turns then to ' break. "It scans fine, using the MF Toolbox.  I have tried rebooting, disconnect and reconnect the printer, turn on and turn off and I have uninstalled and reinstalled the drivers, etc. An other all-in-one (brother), I have at home will work as before my upgrade. My other apps seem to work normally, Suggestions?

  Adding the printer screen says UFRII LT.