Portege Z30 - A - 13 H - problem connecting to 3 / 4g, WIN 7

Similar Questions

• Remote Desktop having problems connecting Surface RT to Win 8 portable Pro (new installation)

  Remote Desktop/RemoteApp problems

  I was not able to connect outside of the network.

  I sprung several days trying to solve this problem by myself, then on the phone with Microsoft productivity, and some of them aren't yet familiar with Surface RT. So with the RD in network connection is quite simple and effective, I hope some people here can confirm that they have the same problems or possible solutions.

  As I see it, there are 3 interfaces where we can connect to RD on the Surface RT: Pre-installe Remote Desktop Office found via scanning and research, the metro downloadable RemoteApp and desktop remotely via the control panel).

  I see where ping command is executed on the computer and port 3389 is open and oriented to the laptop, so I will state the problems I see with each when I try to log on a Windows 8:

  (1) pre-installed RD:
  

  It's great and the name of your computer is there for you and connected to your account and network ready. You have options like "Connect and don't warn me if server authentication fails" I think has helped many people on Windows Server with certificate problems.

  Off-grid on Surface RT, however, you get «Remote desktop cannot find the computer _.» This may mean that '_' does not belong to the specified network. Check the computer name and the domain you are trying to connect to."

  (2) metro UI:

  
  

  It seems to do a ping the computer more quickly when you put: 3389 at the end of your IP address. However, no success after having tried with and without the end of the port. The messages I get are...

  RemoteApp 3):

  

  This is the solution I've seen in most tutorials,... but the reason given for not connecting, it is "the remote computer cannot be authenticated due to problems with its security certificate."

  Instead of the option to bypass (which option 1 gives you), there is no other choice, and he says "Windows is unable to continue setting up this connection. Contact the administrator of your workplace. »

  This message made me to learn more about the certificates that I always wanted to know. I tried to start MMC and ensuring that the cert listed in Remote Desktop has been copied to the folders of the confidence of the authorities certificate root (duplex as certificates on the local computer). I tried different combinations and did not really anywhere.

  If someone connects via #3, please post care on your certificate if you can find it.

  Any help on getting one of these methods to work is appreciated. It puts naked repeat that port 3389 is listed as open on my home network, the traffic is transferred to the correct PC and all firewalls are disabled until I can solve this problem.

  Hello

  Sorry for the delay in responding.

  Assistance in connection with Remote Desktop problems are handled by technicians of the TechNet Forums.

  If you are also facing problems with remote desktop on the computer Windows 7, then please post your question in the Windows 7 IT Pro TechNet Forums: http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w7itpro

  Thank you.

• Problem connecting Remote web workplace Win 8

  I upgraded to Win 8 on my PC at home. Now, I can't connet to the win 7 PC to work. I get to the screen where I choose the PC to connect to and then nothing happens. I can connect without problems to my Win 7 computer laptop. Help, please. Thanx. David.

  I have it exactly the same problem.  When I arrived at the point of "Connect to my computer at work" I just get a blank page.  I use a laptop computer brand new Windows 8.  Our old Windows 7 based laptop works without any problem.

  In this old configuration, I had to activate ActiveX controls to operate at the beginning... I checked these same setting are in place on the new machine of Windows 8 and they are.

  PS - the two links you provided do not work.

• Portege Z30 Module problem - A - 13 L 3 G

  I had a problem with a new Portege Z30 - A - 13 L.

  Module 3 G / 4G do not work. As a first step, the Air software map Watcher on the first Installation of Windows 7 detects the sim card and showed a signal, but it Air card Watcher Software still not said no reception (in German: Kein receipt).

  I also put the right apn in the profile.
  I had this problem with 2 different operators sim cards.

  Cause I wanted to use Windows 8.1 anyway I installed it with the original recovery disks.
  The original Windows 8.1 don t comes with Air card Watcher, so you must do with the instruments of the Board of Directors of Windows 8. Windows 8.1, I had a same problem. It detects the SIM, but it says no network (in German: Kein Netz). I put t found the possibility of changing the apn in 8.1 of Windows until you have a mobile connection.

  Initially the Device Manager displays the Module of Sierra Wireless EM 7305 as a network card.
  Then, I uninstalled the driver of Sierra Wireless and installed the Toshiba page.

  After that the Sierra Wireless Module presents itself as a Com device in Device Manager. The cause so much of this networker of Sierra Wireless adapter isn t it, the mobile broadband connection don t even shows charms Windows 8.1 bar upward.

  After that I reinstalled again the image Windows 8.1 with the original recovery disks.
  I saw said that Sierra Wireless Driver has been installed, but the Module EM7305 of Sierra Wireless is presented with an exclamation mark in Device Manager.

  Then I uninstalled and installed the driver manually again.
  He appears again as com device in Device Manager.

  So I think that the module has been a hardware failure. What do you think?

  > After that I reinstalled again the image Windows 8.1 with the original recovery disks.
  > I saw said that Sierra Wireless Driver has been installed, but the Module EM7305 of Sierra Wireless is presented with an exclamation mark in Device Manager.

  On the page of the Toshiba UE driver, you can find and download the [Sierra Wireless Driver LTE 4 G driver | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 4 & selSeries = 362 & selProduct = 17549 & STAS hortMod = null & language = 13 & selOS = 46 & selType = all & year = upload & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = a he's & selectedLanguage = 13 & type = all & page = 2 & ID = 90092 & OS ID = 46 & driverLanguage = 42]
  This Wireless Broadband Mobile driver is used to transfer data at higher rates and greater capacity.
  Install it!

  Also 3G must be activated before you try to establish a 3 G connection.
  Please check if the 3G module has been activated correctly!

  Recommend checking this information page of Microsoft Mobile Broadband end-to-end
  http://Windows.Microsoft.com/en-us/Windows-8/mobile-broadband-from-start-to-finish

  You will find different troubleshooting tips.

  In the case where you have a signal but you can't connect the possible reasons could be:
  You don t have a valid data subscription.
  The name of the access point (APN), user name or password used for the connection is not valid.
  You're roaming and the selected network operator doesn't allow data services or you don t have roaming enabled for data services.

• Portege Z30-A-12N with Port Replicator Port Hi-Speed USB III problems

  Hi all

  I have a big problem with my new Portege Z30-A-12N and Hi-Speed Port Replicator III.

  I connected the power, DVI, LAN, mouse and keyboard to the Port Replicator.
  Power, DVI and LAN are okay, but none will be found if I connect something to the USB Ports 2.0 or 3.0.
  No mouse, no keyboard, and no USB key.

  When I start my Portege I must enter a password after you press the power button.
  These password, I could enter with the external keyboard, but in windows, no keyboard has been found.

  If I connect the keyboard and mouse to the USB Ports of the Portege instead of Port Replicator, the two has been found.

  I ran Windows 7 Enterprise on the Portege.
  BIOS version is 3.30

  Do you have a solution for me?

  Hello

  The HI-SPEED PORT REPLICATOR III PA5116E-1PRP supports 2 x USB 2.0 and 4 x USB 3.0 ports.
  You n t special need Win 7 drivers in order to be able to use the USB ports or other interfaces such as VGA, DVI, audio, etc.

  Sound problems, make sure that the audio device has been selected in the right panel-> sound-> playback tab

  By the way: Win 7 needs USB driver 3.0 which is preinstalled when the laptop was equipped with USB 3.0 ports. My knowledge if your mobile phone does not support USB 3.0, you will be able to use the port replicator USB 3.0 ports.

  Finally and above all devices must be connected before you start the computer. The decision supported and compatible specifications: Portégé R30 - A, Tecra Z40 - A, Tecra Z50 - A, Portégé Z30-A/Z30t-A, Tecra A50 - has

• Portege Z30 - A - unable to connect to the GSM mobile network.

  Toshiba Portege Z30 - A Windows 7 Prof

  When I try to connect to a modem GSM receives the error:
  "Network connection based on a mobile broadband connection failed with the error code: 1.

  (GSM card works properly in other devices)

  Hello

  According to the Microsoft Knowledge base, the error code 1 means that the device is not configured correctly.
  One of the reasons why the device isn't configured correctly might be missing a driver or the driver / software are configured incorrectly.

  Recommend you to check the configuration.

• Portege Z30-A-189: microphone does not work with the connected headphones

  Hello
  I have a Portege z30-a-189 ultrabook.
  Today, I wanted to use Skype with a headset for the first time and I noticed that when the headphones are connected, the internal microphone does not work.
  When I connect headphones that have the microphone, it works, but I want to use headphones that do not have microphone.
  I chcecked all in windows 10 sound settings.

  If you come on a site back, you will find the solution. (see my last post - realtek settings)
  https://Forum.Toshiba.EU/showthread...-in-headphones

• Portege Z30-a-1E1 - WIFI connection only 150Mbps

  Hello

  Today, I received my Toshiba Portege z30-a-1e1 running Win7. I've updated all the drivers, firmware and of course Windows itself. Unfortunately the WiFi only connects up to 150 Mbps (router configured to 5 GHz only, 40 MHz wide only, only N and auto channel selection, WPA2 Personal). Other laptops at home are connecting with up to 260Mbps (even 7 Asus F8v). Portrege shows that it is connected with the 802.11n standard.

  Any suggestion that I can do to activate the higher speed connectivity.

  Kind regards
  Blazej

  Hello

  150 megabits per second transfer is not a bad value for 802.11 WLan N standard.
  WLan highest transfer rate depends strongly on factors such antenna Wlan, WLan miniPCI and environment module.

  Wikipedia gives this info on the standard 802.11 N standard:
  … Assuming that the operating parameters equal to an 802.11 network g reach 54 megabits per second (on a single channel of 20 MHz with a single antenna), an 802.11n network can reach 72 megabits per second (on a single 20 MHz with a single channel antenna and ns 400 guard interval); of 802.11n speed can go up to 150 megabits per second, if there are no other shows Bluetooth, oven microwave or WiFi in the area using two channels of 20 MHz 40 MHz mode. If several antennas are used, then 802.11n can go up to 288 megabits per second mode of 20 MHz with four antennas, or 600 megabits per second in mode to 40 MHz with four antennas and 400 ns guard interval...

  http://en.Wikipedia.org/wiki/IEEE_802.11n-2009

  By the way: you can check additional WLan module settings in Device Manager-> properties-> Advanced tab

• Portege Z30 / driver Audio Replicator + Touchpad scroll problems

  Hello.

  I bought a Z30 and I'm pretty happy with it that I worked for years with the Thinkpads (+ Dock)
  but there are a few light (more or less can be addresses as a driver) questions that I discovered.

  Notice: I use Win7 64.

  (1) with the Replicator Docking Station, I'm not able to remove the USB Audio device is currently running.
  As you play a video or music. -J' looked for a newer driver (from C-MEDIA) as the standard Microsoft Driver may not be the best choice but I have found NO Win7 drivers for this device. The pilots of C-MEDIA only I found is Win8.

  (2) ALPS Touchpad (pilot)... EH... the material error only on this model really seems to be the touchpad. It is quite difficult to click on buttons AccuPoint (those under the keyboard) and drivers of touchpard are not flexible somehow. Gestures are not actually enforced as it should... seems to be as ALPS had to work on without a lot of time. Synaptics would have been a much better choice.
  The driver cannot be adjusted to speed with scroll gestures and by default is AVERAGE... really ridiculous WAY to fast. In short, it is unusable for regular use. That the effects of tape, the gesture with two fingers and also the gesture of circle. He is desperately missing from a slider to change speeds. Or at least some indication of registry settings.

  Also please advice DAPS to add finger 2 tap as a regular feature in the driver. It can be used without any problem after minor registry change and it works without any problem.

  (3) in the manual NFC is listed, but I have not found ANY Z30 Z40 (Tecra) model has / contain probably the NFC module. -I've seen in some photos the flexband connector (must be for NFC) above the battery is actually present. -There will be a few spare parts (Please give me the ID number /) in the future?

  (4) smart card reader driver problem: I'm using the latest drivers and after some time and sleep (with Intel Rapid Start) the player first must be deactivated and reactivated to rework. certutil.exe - scinfo unresponsive until I have disable and re-enable the device.

  (5) I am absent in BIOS/UEFI to exclude startup devices. -This is normally a must have feature.

  I think that the user manual contain parts which refers to different models of Toshiba as Portege Z30-A/Z30t-A / Satellite Z30-A/Z30t-A

  Some models are equipped with an NFC function, but can not say with certainty what models support this feature exactly.
  It turns out that in many cases the m2 additional connector be responsible for these additional modules.

  Regarding the mode of UEFI: check if the BIOS update would add it. Some portable computers taken over this function after that the BIOS updated.

• Unable to connect 2 external monitors via the Port Replicator using Portege Z30 - 16U

  Hi all

  I need hell, I just moved from another laptop for Portege Z30 - 16U, I spent hours trying to connect my 2 external monitors to my Replicator Port Hi-Speed III 120W, but my laptop will see a monitor.

  I used 2 external monitors with my laptop for years because I do a lot or reading and I don't want to use the one and the laptop screen.

  I tried the mixture of a VGA and a HDMI and VGA cables, but nothing works.

  Can anyone tell me how I can connect and discover 2 external monitors with this laptop and port replicator, I can't believe that this is not possible, it makes no sense that Toshiba would then technilogically behind other laptop manufacturers.

  Thank you

  Liga

  Hello

  I'm not familiar with the Z30 Portreplicator, but the general behavior of the replicators of the double-displayconnector, is that 1 can be used.
  Not 2 simultaneously.

  I could be wrong, and you should easily be able to check it out - use only 1 at a time.
  First, then the other.
  If the two works when used alone, then my suspicion is right.

  I hope this helps!

  TOm BR

• Portege Z30 PT311E - X 11 crash on Linux Debian Jessie

  I have a Portege Z30 PT311E-01P03GIT

  The laptop works very well in dual boot with Windows 7 and Linux Debian 8.2 (Jessie).
  Under Linux, all hardware is recognized and work, but one notable problem occurs at any time, I try to open a movie from Youtube (or do the equivalent local thing).
  The Xorg server dies, killing all programs and user processes and start the KDM login prompt.

  It connect new, all continue to work until the next Youtube movie embedded in a site or things like that.

  Other than that, all the features and video modes work.
  Any help to solve this problem?

  Thank you

  Below, the initialization of the kernel dmesg messages

  Jan 25 13:39:40 core scree: Console [1.985921]: switch to the color buffer device frame 160 x 64
  Jan 25 13:39:40 Screes kernel: [1.988746] 0000:00:02.0 i915: fb0: inteldrmfb frame buffer device
  Jan 25 13:39:40 Screes kernel: [1.988763] i915 0000:00:02.0: registered declaring panic
  Jan 25 13:39:40 Screes kernel: [2.050218] ACPI: video device [GFX0] (multiple heads: Yes rom: Yes post: no)
  Jan 25 13:39:40 Screes kernel: [2.050388] input: video Bus as/devices/LNXSYSTM:00 / LNXSYBUS:00 / PNP0A08:00 / LNXVIDEO:00/input/input6
  Jan 25 13:39:40 Screes kernel: [2.050445] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0

  Hello

  You can try to disable the frame buffer by adding the following for initialization arguments in GRUB

  fb = false

  Here is a non-Toshiba, not Debian related article describes some useful steps:

  http://KB.Digium.com/articles/FAQ/HO...using-problems

  I hope this helps.

  Tom BR

• Portege Z30 16 GB with high speed Port Replicator III and two monitors - resolution

  I have a Portege Z30 with 16 GB of Ram, connected to a Toshiba high speed Port Replicator III which is connected to two monitors running in mode extended.

  The monitor attached to the first section of the video is 1920 x 1200 running.
  However the second monitor is only show support for a maximum of 1280 x 1084.

  The monitors are identical, and both are connected by DisplayPort cables.

  I tried to lower the resolution and save the settings on the first monitor to see if it offered options on the second monitor, but the options remained the same.

  At this point, I have narrowed down to 1280 x 1024 so that it conforms to all the monitors but would like to a plus-res solution.

  Does anyone know if there is a fix/work-around for this?
  If this is a hardware limitation, has anyone tried a USB 3 to DisplayPort adapter in a similar configuration?

  Thank you!

  At the same time using two displayports?
  I wonder how it is possible, because of my knowledge it is not possible... as far as I know the Port Replicator III supports two DisplayPorts but you could choose and use one of them...

  In any case, you can use both with a lower resolution, I guess that this problem can be caused due to incompatible display drivers.
  I suggest you to uninstall reinstall or update the display drivers and check if it helps

• Fingerprints on the Portege Z30-A-12 q utility does not work

  Hello

  I need help with this issue:

  I have installed fresh windows 8.1, the same version as before, but this time I chose UEFI on BIOS. When I used the BIOS the fingerprint sensor was working fine, but now it says "unable to connect to the probe.

  I use Toshiba Portege Z30-A-12 q i5-4200 256 GB SSD, or PT243E model. I've searched the forums and found a similar problem with another Toshiba R product that was resolved by adding an exception to the firewall.

  Utility of fingerprinting with the exception of firewall, even disabled firewall all the way, but always the same problem, I added. In Device Manager, I have biometric sensors (WBF) (PID = 0010) validity under devices.

  I also checked in the BIOS to see if it it turned on and it is.
  The only thing I changed in the BIOS are Secureboot (is on) and has chosen CSM (UEFI), but I think that these settings are not relevant to the problem because they are used for starting.

  I tried to uninstall and reinstall the driver 3 times.

  Please help me with this problem.
  Thank you very much
  Andrei Colombi

  UEFI / start MSC mode has no influence on the fingerprint sensor.

  You said you did a clean install of 8.1 to win.
  I guess that the problem is related to the driver missing or utility.
  I guess you do not have all the essential software available on the Toshiba UE driver page.

  System driver Toshiba to win 8.1 must be installed. It is very important driver package.

  But also try to register fingerprints first in the Windows settings.
  Go to the control panel? Audio equipment &? Biometric devices
  To the left, click Change biometric parameters
  Now, you will see two options: WE (marked) biometrics and biometric OFF (unmarked)
  Now, go to biometric OFF and save changes
  Now go back and click on settings again biometric change
  Now return to the biometrics IT and save the changes.

  Now, you have to click on use your fingerprints with Windows and register fingerprints.

  I think it might be useful to get the utility of fingerprinting works again.

• Portege Z30 - Has is not awaken from its slumber

  One of our employees is using a Toshiba Portege Z30 - A connected to a DisplayLink Targus docking station. By default, our SOE configures power settings to do nothing when the lid closes. We have configured the laptop of this person to go to sleep when the lid closes if the notebook is on battery, and keep the default setting to do nothing if the lid closes when the supply network. About 6 weeks, the laptop has stopped waking up from his sleep.

  I don't know if the implementation of standby or try to wake up from its sleep occurred when it is connected to the sector or on battery only. What are some troubleshooting steps that we can take to help diagnose the problem? BTW, the key entry nothing on this forum site, using IE10/Windows7.

  The laptop does not wake up from sleep, open the lid or also by pressing the power button?

  What BIOS status?
  Is it already knows?

• Portege Z30-A-10w: Win 7 BSOD after upgrade SSD

  Hello

  I am wanting to upgrade a laptop Toshiba-Portege-z30-a-10w of company SSD 128 to 512 SSD
  However when loading windows 7, it crashes when connecting with a blue screen error 0x00000001

  The SSD 512 that I use is
  http://www.crucial.com/USA/en/storage-SSD-M550

  and according to the
  http://www.crucial.com/USA/en/compat...Tege-Z30-a-10W

  It is compatible with the Toshiba portege-z30-a-10w
  I've updated the BIOS of the laptop to V4 30/04/2015 (which to my knowledge is the most recent)
  http://www.Toshiba.co.UK/innovation/...jsp?service=UK
  Moreover I have updated the firmware on the SSD 512 to what, in my view, is the last
  MU02 version
  http://www.crucial.com/USA/en/support-SSD
  However I still get the same problem with Windows 7 to break with a blue screen just before the opening of the session.

  All ideas

  Thank you
  David

  I've never managed to install Windows 7... but I installed Windows 8 and goes on well...

  I have no why, but install Windows 8 seems to allow the 512 SSD to use

  Hope it will be useful.

  David