Power power on Satellite L850 problem

2 months ago I had a problem and I had my main changed with a new card. Before going into the toshiba service center my battery held only about 1 hour. When I got back my laptop with the new main Board battery is a not even hold for 1 second. It was completely dead and useless. So I ordered a new battery on ebay and I just got today.

When I plug it into the laptop battery LED flashes orange. When I tried power the laptop on nothing's happened. When the battery is in, regardless if the laptop is turned on or off, the light continues to blink and regardless if the power adapter is plugged or not, laptop does not turn on. The only way I powered on with new battery needed to remove and turn right on the adapter and then connect the battery. But when I remove the card, the laptop turns off after 2-3 seconds.

I tried to remove the battery drivers and reinstall them, but it did not help. I also tried to remove the adapter and the battery and keep the power button for a while and who have no effect too.

Hello

Is this new original Toshiba product of battery or another brand?
To me, this looks like a compatibility issue. Somehow placed electronic power on the motherboard may not work with this new battery.

Tags: Toshiba

Similar Questions

  • Power on Satellite P100 problems

    Hello

    I just had my second adapter percent machine and it sounds like a common fault with this model (P100-286). Is it possible to change the power supply of a 4 pins that I have now to single round pin that seems more robust that I have a second laptop, but not a Toshiba.

    My adapter is a 15V 8A and I know that you can buy a replacement with single pin socket, but y at - it a plug power jack compatible with this machine, I can use. If you can offer a model number or a link. Is there anyone who has had the same problem and changed the Jack and is successful.

    I also watched the power plug in my machine and it's a 2 red and 2 black wired connection that plugs into the mobo.

    No you cannot convert in a single dose, because you need 4 pins for 8 amps requires that the laptop.

    Single pin adapters are only 5 or 6 amps.

    Are you raising the laptop from the front when the adapter is plugged? This will put a lot of effort on the plug of the adapter and damage it.

  • Driver ATI VGA satellite L850 problem - 12: 00:

    Hello

    IAM has a problem with the vga card drivers.

    The problem started when I used the hdrecovery to restore the laptop to factory default.

    IAM constantly having bsod with number 116 of the bcc and atimpag.sys for the driver who caused the crash.

    When I boot my laptop and enter Windows, after 5 minutes, the screen freezes then it turns black

    100%, then the fans on the laptop

    Then the bsod appears saying "attempt to reset display driver and recover a time-out has failed."

    I've tried several things (installing the drivers from the ati site, install drivers from the toshiba site,) all failed.

    IAM using windows 7 x 64 and have AMD Radeon™ HD 7670 M

    The computer starts normally in safe mode

    I can provide the Minidumps

    Any help appreciated

    > The problem starts up when I used the hdrecovery to restore the laptop to factory default.
    It's very strange. You cell phone as a new one with the same configuration, it is difficult to believe that the installation of recovery is problem.

    Have you changed some settings or installed anything that may be responsible for this? Some codec, player, game, anything else?

  • Satellite L850: Problem ATI - screen shifts to the right once I wake it up

    Hello

    I'm basically looking for some more information about the next version of the video drivers.

    For more information about this, please see the article below:

    http://forums.Toshiba.com/T5/video-display/screen-shifted-to-the-right/TD-p/432195

    I m afraid person here can help you with this info. You have EMEA or OUR model of laptop?

  • Power on Satellite Pro 6100 problem

    Hello
    I seem to have problems with my SP6100 power. It does not power on battery or plugged it in. The charger flashes, but trying to try to power on - it fails to do so.

    Do you think it is a problem of motherboard or real power in MS? If so, please can someone point to me power supply model number to get a price?

    See you soon.

    You have an older model of Toshiba, then perhaps internal Cmos battery maybe got pretty empty, too.

    I don't think that your power supply has a problem, as you can see a light going ON, on your laptop. I suggest you remove the power cable from your laptop, remove the battery, too (push the cover on the side, so he's going to jump out of your laptop).

    Now, without any connected power source, push the button to empty completely the remains of your laptop. Leave your laptop or else be plugged on it for an hour or two, and THEN reconnect your diet. It can show a message on the screen that the "RTC checksum is false", ignore her and start your computer normally. You will need to set the time through the windows again.

    I hope that your laptop now works like new again ;)

    Concerning
    chain

  • Satellite L850-E8S - shutdown problems

    Hello everyone

    I bought Toshiba Satellite L850-E8S with Windows 8.0 (for a single language) preinstalled in October 2013. At the moment I can't get stop normally.

    Question: * pressing Shutdown (stop) of charms goes up "Windows is shutting down" and after that the screen turns off but power light is lit and the fan keeps operate.* I stop it by pressing the power button, I really want to quit smoking. (Once I didn't notice that and put the laptop in a bag for a few hours and it of a miracle that no equipment would have been burnt, despite the laptop was hot like the Sun) * the problem started after a month of use, and I didn't think her yet.*

    First of all, I thought that the case concerns him * hybrid Shutdown in the Win8. I have visited many forums dedicated for hybrid stop, proven fruitless discussions. *! AND! I had the same problem on my laptop with a slight difference - loading Win7 and Linux * the monitor stays on (with the lights and the fan on either). *
    Moreover, I also saw a BSOD after a day I bought the laptop. This problem concerned Realtek Audio driver and SRS Premium sound. As I understood the question is drivers conflict. Right now I have no installed Audio SRS premium and see no BSOD, but Realtek audio driver is not stable: the sound either begins to work in a few minutes after starting windows or it does'nt work at all.

    First of all, I wish really that someone to help me with the shutdown problem. All tips are welcome.

    Hello

    Check it please http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm, change the settings described and try to turn off your computer is turned on on a regular basis.

    It works for you?

  • Satellite L850 - 12 H - notification problem fan

    Hello

    I have a Satellite L850 - 12H.

    I bought it almost two years ago and at the beginning I had some problems of fan.

    After I started there was a message telling me that the cooling system had been damaged and that I should contact Toshiba support so that it can be fixed.

    After I pressed Ok on this message my fan would go close to 100%, which was a pretty annoying sound but the machine was always cool and never had any performance issues.

    There are tho, the message is stopped and now im stuck with the fan works once every 5 minutes that is bad cause I use this laptop mainly for games and im get FPS quite low, even when the games are set on high performance and low "eye-candy".

    Is it possible that I can bring this message back, or even manually the fan start and stop when I need it?

    Thanks in advance.

    As I know there is no way to get this message on the screen.
    This notification if a problem with a module of cooling would be detected.
    What you can do is to change the cooling mode in the Windows power options.

    I guess that you are still using Windows 7 OS pre-installed.

    In this HowTO you find details where necessary option.
    http://APS2.toshiba-tro.de/KB0/HTD12017W0001R01.htm

    You must check the option: _Cooling accΦs_

  • Problems with the Satellite L850 display

    I have a new new Satellite L850 running Windows 8. Lately, when I open the lid or press the power button when the laptop is in mode 'sleep', the screen is shifted to the right or has black lines through it. When I put the laptop back to sleep by pressing the power button, then press it again to wake up to the top of the screen corrects itself.

    Any ideas on what is happening and how to fix it? All the drivers are up to date.

    I think you're the first person who reported on this weird display behavior. Have you noticed that from the first moment on the first day of use?
    Isn't the same case after hibernation?
    This happens to every time or just occasionally?

  • Toshiba Satellite L850 - display driver problem

    Hello
    I have a Toshiba Satellite L850-1j9, (PSKG8E-02D00KCE), in collaboration with i7-3630QM and an AMD Radeon HD M 7670.

    The problem is, I'm not able to install the AMD display driver. When I try to install the software and drivers this problem appears: https://youtu.be/AOiPq8WVz_M

    The first time that I was using Win 10. I did the update to win 10 about a month ago and everything was ok until 4 days ago. I was working with my laptop with an external screen connected by HDMI and all of a sudden the screen started to Flash some green lines with a black background (something like you can see in the video).

    I saw on the internet that some people have problems making the update to wion10, I have installed new Windows 8 to see if has something related to win10 but the problem persists.

    I tried to install the intel CPU, a graphics 4000HD Intel GPU, but may not use it as a main GPU. I had this problem: "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

    I need help please to understand what I can do to solve this problem. I took a peek on the internet and so far, I found a solution that could solve my problem.

    Thanks for your help.

    Hey

    any solution?

    Does anyone know if toshiba will make an update of the bios where I can change the graphics card? AMD to Intel...

  • Satellite L850 - cannot play Minecraft - graphics driver problem

    Hello

    I have a Satellite L850 with this specs: Intel Core i7 3630QM with an AMD Radeon HD7670M and 8 64-bit windows.
    I installed the latest drivers display amd by toshiba Web site and java 64 bit.

    Walker I launch Minecraft is as usual, but when I click on connection a black screen stands for awhile, then the failure Message screen comes and it means something like this:

    Bad video card drivers!

    Minecraft could not start because it did not find an accelerated OpenGL mode.

    Generally, this can be corrected by updating the video card drivers.

    So I hope that you are able to help me.
    I've already spent many hours to fix it, but nothing works
    :(

    In this game forum, you can find several discussions on the problems in playing Classic.
    All cases have been resolved by the update of the graphics card driver.

    To my knowledge, the driver of Toshiba page does not contain the OpenGL but DirectX (of Microsoft)

    Then maybe you will need to install the driver of an another 3rd party sources
    Your laptop supports the AMD (ATI) graphics chip?
    Well, in this case, you could test a driver of omegadrivers.net but the use of this driver is your own risk, don't know if it will work stable

  • Satellite L850-18 t has problems to connect to new wireless router

    Hello

    I have a serious question that, at the present time, he cannot know. Basically 2 days ago I bought a new router because the other more old has stopped working. And I bought Tenda router. Since that day I have problems connecting with my Toshiba Satellite L850-18 t - I have never had similar problems before.

    I put the security of the router for wpa - psk with aes encriptación mode option. The laptop connected and worked fine, but the next day, he has not suddenly connect more. So I went to check the option, everything was allright. Troubleshooting gave me the following error: "problem with wireless adapter or access point. I tried to reboot wlan driver, but nothing happened. The only thing that seems to help is to change the security WPA2-PSK mode (or vice versa), restart my laptop and it connects then.

    Anyone have some clue what happens? It must be something with my laptop settings, because all other devices (another computer toshiba laptop but older, a PC and android devices) work perfectly.

    Among the specifics on laptop:
    -Computer laptop Toshiba Satellite L850-18 t
    -Network cards:
    -AR9485WB-EG atheros wireless network adapter
    -Realtek PCIe GBE Family Controller
    -Router: Tenda

    Thank you!

    Posted by luka_10
    Hello

    I have a serious question that, at the present time, he cannot know. Basically 2 days ago I bought a new router because the other more old has stopped working. And I bought Tenda router. Since that day I have problems connecting with my Toshiba Satellite L850-18 t - I have never had similar problems before.

    I put the security of the router for wpa - psk with aes encriptación mode option. The laptop connected and worked fine, but the next day, he has not suddenly connect more. So I went to check the option, everything was allright. Troubleshooting gave me the following error: "problem with wireless adapter or access point. I tried to reboot wlan driver, but nothing happened. The only thing that seems to help is to change the security WPA2-PSK mode (or vice versa), restart my laptop and it connects then.

    Anyone have some clue what happens? It must be something with my laptop settings, because all other devices (another computer toshiba laptop but older, a PC and android devices) work perfectly.

    Among the specifics on laptop:
    -Computer laptop Toshiba Satellite L850-18 t
    -Network cards:
    -AR9485WB-EG atheros wireless network adapter
    -Realtek PCIe GBE Family Controller
    -Router: Tenda

    Thank you!

    What I see is that we have same wireless Chipset, Tenda use Ralink or Broadcom chipsets, which are compatible with our wifi cards, then I would tell you my opinion do 1st updated drivers on your laptop, I use the latest x 64 win10, atheros version drivers 10.0.0.326, then go and upgrade your routers firmware! I don't know it will solve your problem, by the way check firmware of the laptop is the last 6,80 I think!

  • Satellite L850-12U: various annoying problems

    Hello

    I have some problems with my laptop Toshiba Satellite L850-12U, purchased 550 on Grosbill in September. It is under warranty!

    -Bad contact of the battery to the battery can disconnect a moment at any time (a simple light touch is necessary to reconnect). When I'm on this sector is no problem, but when I am on battery so he can break any time...

    -I happened to have had the fan goes crazy and/or a message ' warning system: Please turn off the computer and return it.

    -Startup problems: at one time I often had a crash initially followed a reboot via the Backup Wizard, this also happened to have a reboot loop.

    I would return the PC to the fast service?
    When the service will solve my problem?
    Until the end of June, I have no PC to help me, if the repair takes time I have to wait until June to get back...
    Thanks in advance

    P.S: Sorry for my English, I'm French and I use GoogleTrad

    > I would return the PC to the fast service?
    In my opinion, yes the battery loose contacts is definitely a hardware problem.
    So in my opinion it has to be verified by the service agent

    > What time the service will solve my problem?
    Do you not think that members of the community don't know how long a service needs to fix this? Why you n t contact the ASP in your country and ask for details

    Here you can find the database with all FSA worldwide:
    http://www.Toshiba.EU/innovation/generic/ASP_SUPPORT/

  • Satellite L850 - display problems external 1080 p

    I did turn my laptop Satellite L850 via HDMI to an external monitor without problem for many months.

    A couple of weeks, I tried to update the catalyst driver and have had problems since.
    Basically now when I select mode 1080 p via the Catalyst Control Panel, it makes the screen flash and present vertical lines.

    Occasionally, it will work for a short time, even up to a full day and it will randomly start once again. I can play a game in 1080 p mode and it will be totally random, sometimes which allows me to play for hours without having the screen flashes black while the other times, it starts flashing constantly and the only way to fix it is to reboot or pull the HDMI cable and plug back and cross your fingers you have enough time to reopen the catalyst and change in 720 p which is always stable.

    I tried:

    1 using the AMD catalyst removal tool and resettlement through the catalyst of origin Toshiba drivers factory default
    2. use to restore the system to go back before I made the changes
    3 using the removal tool from AMD Catalyst and update to the latest version via the site Web of AMD.
    4 reinstall my chipset with #1 drivers
    5 tried another monitor (still happens)

    On a side note, whenever I use the removal tool it removes my USB drivers too and I have to reinstall.

    The current graphics driver is AMD Radeon HD 7670 M and I also tried the solution on here http://www.mytoshiba.com.au/support/item/781 tech support forum.

    I ran out of options other than a full format and reinstall I want to avoid if possible. Any suggestions would be greatly appreciated.

    Thanks in advance

    Hello

    The AMD Catalyst (control software) update would not solve the issue.
    You need to update the graphics driver too!
    The graphics card driver can be uninstalled in Device Manager!

    I found also this Toshiba document to similar topic which appeared after the phone woke from sleep mode.
    [After sleep mode, a distorted image or a split screen may be displayed: http://aps2.toshiba-tro.de/kb0/TSB3903IB0000R01.htm]

    This problem was caused by the display AMD. V9.12.0.0 driver, which was automatically installed through the Windows Update feature.

    Download and install the driver of Toshiba page of European driver that should solve the issue of the line

  • Re: Satellite L850 - BIOS update problem

    Hello

    I have problem with my laptop Toshiba Satellite L850 (PSKDLA-0C900R). When upgrading the BIOS to 6.1, there was windows pop up with error

    "Flash process will end!
    Current platform have secure start capability, it must provide the location of storage interface IHSI NV.
    Please contact BIOS OEM enginner to add functionality... »

    I pressed OK on this error and it upgraded the BIOS, but now I can't change any option in the BIOS, I can get into the BIOS settings and can see BIOS options but it does allow me to change a

    for example if I want to change the boot order, I can go into the BIOS and can see boot order but cannot change or select one of the options

    I use Win7 64 bit

    What should I do?
    Help, please...

    If I m remembering well updates to BIOS version 6 is designed for Win8.
    If it is not necessary to don t change anything.

    You have problems with your machine?

  • Satellite L850: Windows 8 error - 'PC hit a problem... ". »

    Hello.

    I bought a portable Satellite L850, used it for about 2 hours. Next time I booted up it, the error ""restart your PC on a problem and needs. " We are only collecting information, and then we will restart for you. (0% complete) "in a blue screen appeared.

    He gave me two options using the F8 key, has nothing; He blinked only screen when I pressed the F8 key or any other key F for all that matters.

    Changing the boot in the bios options, I was able to boot a Windows 7 DVD booteable, and to my surprise, I found that the hard drive had no partitions... at all (when it should be 2 maybe 3 partitions and a space law?).

    Of course, I could not also burn the recovery DVDs because I could not go back to windows, and when I tried to boot from an overview of client Windows 8 DVD, the same error occurred, over and over again.

    I now use the computer under Windows 7 I have installed, but I would definitely come back the origin of windows 8 copy supplied with the computer... or at least be able to maybe install another copy of Windows 8 of my own.

    Somebody help me, I would really appreciate it.

    Sorry if my English is not good enough, it isn't my mother tongue.

    Hello

    I think that you have installed Win 7 on the HARD drive. Right?
    This means that Win 8 is no longer available looks like you couldn't create the recovery disk containing 8 win too so I don't see an option for you allow to win 8:
    You must order the disk recovery from here:
    http://backupmedia.Toshiba.EU/landing.aspx

    But a question remains open: why the BSOD appeared?
    It could be a problem of system or a hardware problem, but I can't say with certainty what's exactly wrong according to me, you will need to contact a service if the installation of Win 8 can not fix this

Maybe you are looking for

  • DeskJet 1220C

    printer didn't pick up paper from the main tray unless I press the button which begins to blink.

  • recovery passwrd hp p2000 G3 fc/iscsi

    Hello How are you? I forgot my phone password device name: san storage model: hp p2000 G3 fc/iscsi controller How my password recovery? How my password recovery? Thank you

  • How to reset the administrator password?

    I need to connect to the administrator command prompt but can not go beyond the password my i.t. people never told me the password. Can I reset or find it?

  • BlackBerry Smartphones Blackberry "Bold" problem in the load Center

    My Blackberry 9000 does not charge when connected to a power plant.   When I sink into the power station, the display switches to the clock.   When I manually check the screen and I see the battery indicator, showing that he is in charge.  But when I

  • incoming and outgoing calls to and from the highway of VCS

    Hello world I have a client, there the Polycom videoconferencing solution. now they're going to implement Cisco Tandberg, I want to configure the new solution to simulate the old a. I have now two points are not clear for me and I hope someone can he