power setting

Similar Questions

• Eurotherm 2404% manual power set point

  I'm using the LabView ET24xx driver. It works fine if I want to set and control in automated mode. I'm looking for the ability to create a vi that allows me to switch to manual mode (able to do that) and adjust the set value (can't do it). The set point in Manual Mode is generally the percentage of power. I would like to be able to establish to anything other than 0% or 100%, however when I use the driver it does not appear as a method of manipulation of this. I know I'm missing something, and any help would be greatly appreciated.

  Thank you

  Tennessee Paul

  Thank you, Robert. After a lot of research I found the solution:

  Use the VI: ET24XX configure OP key parameters 2. VI

  key point in the use of this VI. The power (or control) setting labeled power output target is in tenths. A value of 5 = 50%. A value of 0.5 = 5%. With this VI no value greater than 10 will work. The VI will timeout on the "Write" command, if the value is greater than 10. I don't know why this VI was established in this way. Remove the output target x 10 serving power and wiring of the power output target control directly in the table of generation within the VI allows a more intuitive entry of power, until we realize the value of the power output target is %.

• my continuous computer to go to sleep every minute I have already try the power setting but no change.

  computer is hp pavilion elite e9270f Windows 7 64-bit OS

  do you have a system recovery that everything is great except for thid problem

  can anyone help please thanks in advance.

  Have you checked to see if you have a screensaver set to 1 min? What power did you check? The one in the bios or the one on the computer?

• The power setting when you use HDMI

  Hello.

  I use a Y730 with Vista 32 bit.  I play a mpg4 using Quicktime.  My output is my High Def TV on the HDMI output.  I have the audio and video on the TV without any problems.  Computer power settings are updated never stop.

  While watching, the screen turns off after 10 or 15 minutes, I love (like 5 minutes or less), then after 2 minutes the computer stops playing the movie as if it is entered in mode 'sleep'.  If I move the mouse between the screen off and the 'sleep', he continues to play.  It's very annoying to do every 10 to 15 minutes.

  How can I pay for orders of power/energy to have the monitor off, but the file still to play.

  Thank you

  Carl

  @yigit if you click on the System tab, you can change other settings. These parameters, it must change and set it to NEVER. I suggest to change the plan of 'high performance '.

• Power setting change the connection speed

  I don't know if anyone else has noticed this, but when I change my setting of symmetric power high performance on my laptop and when I start a stack and not connected to the adapter, I noticed a connection speed much more to my wireless router when I connect to the desktop computer. I'm curious because sometimes it wouldn't connect and join the star thingy and I have to reconnect but when I go to the balance or start on battery, the connection speed is almost instantaneous. I tried to uninstall my wireless driver and let the computer to reinstall the driver itself and it fixed a bit, I could connect automatically, more fast, but still not as fast as the balanced mode. Someone please tell me what to do because the problem is back.

  Hello Charles,

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  Have you made any changes to your computer hardware or software?

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the network troubleshooting and check.
  Refer to this article:
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  If this does not help, then use method 2.

  Method 2:
  Please use the suggestions provided in this Microsoft support article and check.
  Reference:
  Why is my Internet connection so slow?
  http://Windows.Microsoft.com/en-us/Windows/why-Internet-connection-slow#why-Internet-connection-slow=Windows-7

  Important notes:
  Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings. Reset Internet Explorer is not reversible, and all the previous settings are lost after reset.

  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Toshiba A45/S151: OS crashes after the change of power setting

  The power settings on my laptop seem highly incompatible. When it is running on batteries (100% charged), it will run for 1 to 10 or 15 minutes (schedules are purely random)... and then simply pass time. The screen will stay still and t move the mouse, the keyboard does not work either. The problem remains even to change power settings Windows laptop mode. All solutions?

  Concerning
  Maury

  Hi Maury

  Well, I have really no idea what can be the problem. You can try to recover the operating system with the Toshiba Recovery CD without having to install tools and third-party utilities. If the problem remains the same, it is possible that something is wrong with the hardware. For example, the motherboard.

  Good bye

• Reinstall the Perfomance high power setting for notebook Pavilion DV5 1111-ea

  Hello world

  I upgraded my OS from vista to windows 7 ultimate 64-bit. Everything is great, except that I lost the option high performance in the power settings - I now only have savings of energy and balance settings to choose.

  How can I reinstall the power option high performance?

  Thank you very much

  Ed

  High performance does not appear on the default battery meter. To enable high performance, open Power Options by clicking the Start button, then Control Panel. Under Select a power plan, complementary to see plans-click and then click it performance.

• win xp screensaver and power setting, stop working

  Currently win Xp Home screensaver and settings to be able to stop working, tried to reset without success. Any suggestions?

  Hi Answrtek,

  ·         What happens when you make changes?

  ·         You receive an error?

  ·         You have the latest updates of Windows installed?

  Method 1: Check to see if this article helps you to the issue of the screen saver.

  Screen saver may not start in Windows XP

  Method 2: Refer to this article to resolve the problem of power settings.

  Power scheme options are unavailable on a Windows XP-based computer

• Custom agent - a power setting

  Allright, I have looked around and have not been able to find what I'm looking for custom agent documentation.  I have a custom agent script that I want to make it dynamic and re-usable by being able to pass a parameter.  The hope was so that I could deploy several custom agent in which each agent could pass the parameter to get their individual settings. Looks a lot like a logfilter agent where you create several people using the same agent, but feed you to the location of the logs that you want to crawl through the agent.  Similarly, I want to be able to feed my script parameter.

  Second, when you look at a custom property agent I see "cmdLine" property  Can someone explain the purpose of this property and how it is used?

  Considering how rarely you change settings as you describe, you can more easily deploy a simple configuration file to the location of the agent and set your configuration in the file.  The prototype config file could be included in the zip file you supply the agent script generator, and then be found and modified after the agent is deployed.  It is the process, I used for various agents of PowerShell script, but might work just about any language.

  Another approach would be to create a central configuration file and all have the script agents refers to the central location to get the configuration information as required.

  Given how limiting the F4 data structure is, there is not much point in getting more complex until a new script agent mechanism, possibly with a future platform F6.

• How to make ticker rss to Web sites of active power after marking of the power set as read?

  Cannot do recharge now.

  History of compensation worked I think! Seems to work for the moment. Thank you!

• Screensaver reappear even with the power set to NEVER

  Hello

  The screen saver appears when reading articles, I put the parameters of sleep FOREVER, but the problem persists. That's all new out of the box, is another parameter to disable. The new computer running Windows 8, my old computer was XP.

  Thank you

  Jon

  Please, find the wait parameter is in the aver option screen.

• M4: Regulation of the CPU power and fan - tablet is running hot and noisy

  My M4 is running hot and and the frequent active noisy fan in the normal power setting. This allows to improve some during the definition of the maximum energy saving options: battery life. But still the fan starts running and short relatively frequent. The fan noise is high enough to be quite irritating in a quiet environment.

  Is this normal?

  Also my M4 allows on occations to memorize the fan.
  Cpu temperature drops from 58 to about 44 C after awhile, but the fan still works.
  However, if I go on hold for 1 second and back, fan control is reset and the fan turns off.
  Yourself or others behave the same?

  Conditions are improving a little tuning down the cpu down voltage using hardware control (NHC) Notebook
  (http://www.pbus-167.com/)

  East of problems common to the M4 or Tecra series?

  GeirS

  Hello

  If the operating temperature of the machine goes upward, so that the cooling fan turns on.
  Many parts for example produce a lot of heat from the graphics card.
  In addition the CPU temperature increases if many processes are running in the context of the operating system or if you are working with programs (i.e. playing games).
  If you have a laptop computer with a processor that is hot much faster one and then another, it must be cooled more often.
  You can believe me :) It's not a fault!

  If you wish, you can try changing the cooling method parameter in Toshiba power saver utility.

  Best regards

• Beep every one or two minutes when connected to the a/c power

  This happens when I have my laptop plugged into the a/c power. How can I get him to stop? The tone seems to be connected to a power setting, because the brightness of the screen increases or decreases when my cell phone rings. I was unable to find the reason why he's doing this. Can anyone help?

  Two possibilities.

  (1) your system goes into power saving mode because it has not been used - check your power settings in the control panel

  (2) your system may be overheating and forced into a mode of power reduced to reduce the heat ouput - check your fans and vents work properly.

• We will seek answers carnt engage power sleep mode despite the ok value settings

  new computer operating system loaded ok, but usually indulge dipite sleep mode all the power setting of say everying is ok. boots emediatley after selection sleep it's not mouse or everything I know help becomes very noisy

  Hello

  • Remember to make changes to the system?
  • Who is the manufacturer of the graphics card and what is the model?
  • What version of Windows are you using?

  You can view these methods:

  Method 1:

  I suggest you to download the latest drivers for the graphics card and install on the system and check. See the article mentioned below.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  I recommend you perform the clean boot and check.

  Configuration of your system in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Drive hard 2 772 g v3 power off

  After you install an mSATA SSD (which became disk 0) alongside the SATA existing HDD (which became disk 1) and clean install of Windows 10, I have a very annoying problem.

  2nd HARD drive being 1 TB vs the SSD 120 GB I have installed, is where I keep all my games etc. I hear the HARD disc rotation down after a few seconds, and whenever I need to get something out of it, will have to wait awhile for her to turn up until I can open files or folders. It would not be something huge, but even in full games, if they are not access the disk constantly, he falls asleep and when they do not need to draw in addition to some data, the game ends up pounding to stop waiting on the disk to spin to the top, so it can load the next section. It's absolutely game break!

  I put the drive to never turn off advanced power management, but it seems that this only affects the system disk. When I boot on Windows 8, it works perfectly without ever turned off, I assume that since this is the system drive. I also tried to disable the USB suspend stuff, just on the off chance. It seems completely independently of the power setting, after all, even if it was set to turn off after 10 minutes, would never be a problem all in game. It's turn off after a few seconds of having been used. I can open my pictures, and if I want to watch more than 1, I have to be fast enough to pass the following otherwise what happened to beddybyes again.

  How can I stop it off without a ridiculous to constantly write a blank file tool him?

  Hello

  This is a feature that saves energy on the laptop. 'S called it advanced HARD drive power management.

  You can learn more on this subject on the internet of course.

  You can use hdparam to set the value in order to avoid the counters or counters after a longer time.

  http://disablehddapm.blogspot.com/p/1.html

  More info on APM briefly of course:

  http://disablehddapm.blogspot.com/

  You can search on the internet for even more information on APM.

  Just a quick note. I think that windows has updated the APM 80 on the second HDD which would mean to counters after 30 seconds of inactivity. It is a method to save the life of the battery. It defines this parameter in the firmware of the hard drive, and even if you change once, it will always set the value even after a reboot, so the above software needs to run at every boot.