PowerShell list replica Replays

Similar Questions

• Reference Dell EqualLogic Powershell Script & replicas

  Hi all

  I develop a script to extract information on replicas made between two bays EQL PS Series Dell.

  For each volume, I keep a history of 10 aftershocks, I use the following command to display all the replicas made of a specific volume.

  > get-eqlreplica - GroupName SANPROD - ReplicationSite SANBCK - VOLUME VolumeName

  But I'm unable to get the size for each replica. Is it possible to do this with the cmdlet provided by Dell?

  Thanks for your help!

  Currently the cmd - allows PowerShell does not size of replication data.  For now, only the GUI and the SANHQ can show you the size of each replication.

  -joe

• Vista - Unable to uninstall Powershell updates

  The upgrade from Vista Home to Vista Ultimate. Scan says to uninstall Windows PowerShell can't find that PowerShell listed in the list of installed upddates where she is supposed to appear first. Ditto for the number mentioned in other forums. What I see is the list of patches and undates with name KBXXXXXX - no specific program like PowerShell. Is there a switch to display the name of program of PowerShell in this list? PowerShell is being hidden? Do not know how to proceed.

  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Windows.PowerShell

  Try the above Discussion of Powershell group.

  They would be problems with it specialists.

  See you soon.

  Mick Murphy - Microsoft partner

• Microsoft technical support can't help you with the faulty Modules Installer.

  I have pleasures with support by e-mail dated December 18 and the subject of some updates that caused the Windows Modules Installer to stop working.  Here are the steps that have been taken so far:

  1. reboot the failet installation service.

  2 direct download of Trustinstaller.exe and Trustinstaller.reg.

  3. transfer of support tech System Info of MSINFO32.

  4 Indentifcation updates specific causing the crash of the installer of Modules and make a direct download of them.

  5 reset Internet Explorer options and disabling third-party browser extensions.

  6 direct download of the tool.

  7 supply tech with screenshots of SFC.exe and CheckSUR.log.

  8 run the SFC/scannow command to request of the tech.  Error message received after scan 25% over that he can't finish.

  9. made by tech to perform an in Place Upgrade of my installation disks.  Update could not happen due to Windows PowerShell.

  10. made by tech to remove Windows PowerShell via "Turn Windows features on or off."  Error message that PowerShell cannot be disabled.

  11. realized by tech to modify the registry to disable the PowerShell.  In Place Upgrade always reports installed PowerShell and would not continue.

  12. looked for Windows PowerShell among the "installed updates".  There is no update labeled "Windows PowerShell" listed.

  So that is where I am now.  Windows Update did not work except for the occasional definition for Microsoft Security Essentials update since mid-December.  No security updates or patches cannot install properly by the installer of Modules of Windows crash.  I can't repair my installation of Windows because I can't uninstall Windows PowerShell.  If someone is able to help, please keep in mind that I read all the posts about how to uninstall Windows PowerShell through the registry and installed updates; None of them have worked for me; so please don't cut and paste these instructions again.

  Thanks to anyone who can help me.

  System information: Windows Vista 64-bit, SP2 top Home.

  And you were right: a trial version of Norton is installed.  I'm going to grap the Norton removal tool now.

  You should have uninstalled Norton free trialware, and then run the removal tool, BEFORE the installation of updates...

  Friday, January 21, 2011 18:59 [UTC], Robear Dyer wrote:

  VERY IMPORTANT! -Online any Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate prior to installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application...

  That being said, you have to get SP1 is installed, and then a few prerequisite updates (e.g., KB955430;) KB947821) before Windows Update will offer SP2. See...

  Windows Vista service packs are not available for installation via Windows Update
  [was: Windows Vista Service Pack 1 (maybe not) available for installation from Windows Update and is not offered by automatic updates]
  http://support.Microsoft.com/kb/948343

• NEW MRS. 5.1 with NETAPP SRA 2.0.1 get the error allowing matched table.

  I tried to install VMWare SRM 5.1 with netapp 8.1.2 with netapp SRA 2.0.1 Simulator.

  I created two sites and synchronous sites and installed MRS. After that added two sites and tables. The sra has successfully added to these two sites. But when I tried to allow the tables associated with, I am getting error on the DR sra as follows.

  SRA command 'discoverDevices' failed. SAN or NAS device not found

  Make sure that the SAN device is configured and mapped to a Group of ostype vmware and NAS device is configured and exported with the rules of the rw.

  I have check the logfile DR sra, it list due to error.

  30 12-2012 T 01: 03:24 replication storage NetApp FAS/V-Series adapter Version 2.0.1.0 Build Date 26/06/2012
  -> 30-12-2012T 01: 03:24 discover the devices began
  -> 30-12-2012T 01: 03:24 1
  -> 30-12-2012T 01: 03:24 list of exclusion: vol0
  ->
  ->
  -> 30-12-2012T 01: IP 03:24 for hostname:PR - NETAPP is 192.168.10.100
  -> 30-12-2012T 01: 03:35 collection world wide node name
  -> 30-12-2012T 01: 03:35 collection list of iscsi ports
  -> 30-12-2012T 01: 03:35 collection fcp port
  -> 30-12-2012T 01: 03:35 IP address of collection storage
  -> 30-12-2012T 01: 03:35 Group information collection
  -> 30-12-2012T 01: 03:35 Group IG-IS-D has iqn.1998 - 01.com.vmware:dr - esxi-5b82185b and type ISCSI initiator
  -> 30-12-2012T 01: 03:35 collection list LUNS replicated
  -> 30-12-2012T 01: 03:36 vol1/flight/vol1/ESX-PR-LUN provided audit
  -> 30-12-2012T 01: 03:36 including/flight/vol1/ESX-PR-LUN after checking the opaque filters
  -> 30-12-2012T 01: 03:36 validate whether/flight/vol1/ESX-PR-LUN path is valid in the opposite direction of device to give peerArrayId
  -> 30-12-2012T 01: 03:36 could not discover any LUN mapped to the ostype vmware Group and replicated
  -> 30-12-2012T 01: 03:36 collection list replicated exports
  -> 30-12-2012T 01: 03:36 validate if vol1 path is valid in the opposite direction of device to give peerArrayId
  -> 30-12-2012T 01: 03:36 could not discover any replicated export
  -> 30-12-2012T 01: 03:36 no devices found
  -> 30-12-2012T 01: 03:36 discover the devices completed with errors
  2012 12-30 T 01: 03:36.872 + 03:00 [04604 opID wordy of "SraCommand" = A3306132 - 000005 A 2] Stopped listening to updates of file 'C:\Windows\TEMP\vmware-SYSTEM\sra-status-75-107 '.
  2012 12-30 T 01: 03:36.872 + 03:00 [04604 opID wordy of "SraCommand" = A3306132 - 000005 A 2] quashing SRA command timeout
  2012 12-30 T 01: 03:36.872 + 03:00 [04604 info 'SraCommand' opID = A3306132 - 000005 A 2] discoverDevices came out with exit code 0
  2012 12-30 T 01: 03:36.872 + 03:00 [04604 opID wordy of "SraCommand" = A3306132 - 000005 A 2] discoverDevices responded with:
  --> <? XML version = "1.0" encoding = "UTF-8"? >
  "--> < response xmlns ="http://www.vmware.com/srm/sra/v2">."
  --> < error code = "1014" / >
  --> < / answer >

  Please find attached files for newspapers of sra and netapp configuration

  Hello

  You must map the LUNs replicated with DR site with read-only mode.

  Concerning

  Mohammed

• script to find VM with configured serial port

  I'm looking for a script powershell list all virtual machines with a configured serial port. someone has already written one? I looked at the health check and scripts of type I could find, but could not find a list of the serial ports on the inventory.

  Thank you

  Mike

  Try something like this

  Get-View -ViewType VirtualMachine | %{
       if($_.Config.Hardware.Device | where{$_.gettype().Name -eq "VirtualSerialPort"}){
            $_.Name
       }
  }
  

  ____________

  Blog: LucD notes

  Twitter: lucd22

• How to uninstall PowerShell when it is not in Add/Remove list even w / 'show updates' checked?

  I have powershell on my Start menu, but it does not appear in Add/Remove, even w / 'show updates' checked.  I checked for updates kb926139, kb926140 and kb926141. None of those appear no more, even w / 'show updates' ticked.  I tried to run, type appwiz.cpl, 'show updates' with the same result.  I don't want or need this program and wish to get rid of him, if I can do it easily and safely.  Not a user experienced, so I can't go digging around in my directory for the files, because I know not even how to get into the directory!  Can anyone help?  Have xpsp3

  I have powershell on my Start menu, but it does not appear in Add/Remove, even w / 'show updates' checked.  I checked for updates kb926139, kb926140 and kb926141. None of those appear no more, even w / 'show updates' ticked.  I tried to run, type appwiz.cpl, 'show updates' with the same result.  I don't want or need this program and wish to get rid of him, if I can do it easily and safely.  Not a user experienced, so I can't go digging around in my directory for the files, because I know not even how to get into the directory!  Can anyone help?  Have xpsp3

  He is listed as Windows Powershell. Maybe you just looked for Powershell. You were just to check the brand of show updates.
  I do not vote for me I'm not here for points. If this post helps you, vote. Visit my forum @ http://repairbotsonline.com/

• How to remove Windows PowerShell 2.0, while all my update lists are lost?

  Hello

  I'm terriblely sorry that I am a Chinese, as China MS can not solve the problem, I ask you for help.

  All my lists update are lost, this means while I opened the update of lists, it's empty, but all my updates are installed on the computer.

  If I can't remove Windows PowerShell, I can not test compatibility of Vista so I can't use the upgrade to repair the operating system.

  Thank you, if you can help, I know how to use CMD to delete PowerShell 1.0 but it cannot be used for 2.0 and msicuu2 cannot remove updates, if using the MS means do not work, I hope you can tell me how to use software from other producers to remove Windows PowerShell 2.0.

  Thanks again.

  Unless you format the drive HARD and then do a clean install of Vista & then get SP2 installed to switch to Win7, your best bet would be a fresh install of Win7.

  In other words, the presence of Windows PowerShell 2.0 isn't your problem - a system infected with hijackware is your problem.

• Need a powershell script to create a local user on esx given the esx server list box

  Hello

  I need a powershell script to create a local user on esx in a given list entry of esx servers through a csv spreadsheet. The script should ask me the user name and the password for the user name to be created on the given list of esx servers.

  Thanks in advance!

  Just noticed that there is a lack of vacuum after the - password parameter.

  It should be

  $userName = Read-Host "Username"
  $password = Read-Host "Password" -AsSecureString:$true
  Import-Csv "C:\vmhosts.csv" | %{
       Connect-VIServer -Server $_.Hostname -Credential (Get-Credential)
       New-VMHostAccount  -Id $userName -Password $password -UserAccount:$true -GrantShellAccess:$true -Confirm:$false
       Disconnect-VIServer -Confirm:$false
  }
  

  ____________

  Blog: LucD notes

  Twitter: lucd22

• PowerShell, selcetable lists

  Hello

  I'm starting a small project of powershell for automation to failover to the boxes in DR (failover in offline mode)

  I stumbled at the first hurdle. I would like to create dynamic, selectable lists for my users to tro responds when you are prompted.

  for example, I want to invite a user to select a data store in the warehouses of data available in the VirtualCentre.

  for example I want in the background running ' get-resourcepool | Select name '

  generation of unelistede like:

  Prod_DS1

  Prod_DS2

  Dev_DS1

  Dev_DS2

  Dev_DS3

  Uat_DS1 etc.

  the user must obtain:

  Please select a data store in the list:

  1 Prod_DS1

  2 Prod_DS2

  3 Dev_DS1

  4 Dev_DS2

  5 Dev_DS3

  6 Uat_DS1

  They should just type a number.

  How about this?

  $x = @(0) * 20 # initialize the array
  $i=0 # intialize the indexer
  get-resourcepool `
       | select -first 20 `
       | % { $x[$i]=$_.Name; "{0} {1}" -f $i++, $_.Name } # store the resource pools into an array and display the array
  $index = read-host index # ask for an index
  $x[$index] # display the name matching the given index
  

  Or... as a good word:

  $x = @(0) * 20; $i=0; get-resourcepool | select -first 20 | % { $x[$i]=$_.Name; "{0} {1}" -f $i++, $_.Name } ; $index = read-host index ; $x[$index]
  

• Need a PowerShell Script to list all my stores of data, capacity and VMFS format.

  All,

  I need a script to list all my stores of data, capacity and VMFS format.

  That's what I have so far but its does not give me the results I need.

  Get-Datastore - Datacenter MN_PROD | where {$_.} Type - eq "VMFS"} | Select-Object Name,@{N="VMFS version. {E = {$_.Info.Vmfs.Version}}

  Try like this

  Get-Datastore -Datacenter MN_PROD | where {$_.Type -eq "VMFS"} | Select-Object Name,CapacityGB,    @{N="VMFS version";E={$_.FileSystemVersion}}
  

• PowerShell code to list all VM by Datastore

  Hello world

  I got the following script to list all of the virtual machine by the data store, but somehow it does not store data (empty) for some virtual machines?

  Get-data center | Get - VM | %{ $_. Name + " - " + (($_ | Get-Datastore. Select name). Name) | sort name} | FT - AutoSize

  any kind of help would be greatly appreciated.

  Kind regards

  AWT

  If you have guests who have connections to 2 or more data stores?

  Try this

  Get-Datacenter | Get-VM | %{
       $vm = $_
       Get-Datastore -VM $vm | %{
            $vm.Name + "-" + $_.Name
       }
  } | ft -AutoSize
  

  ____________

  Blog: LucD notes

  Twitter: lucd22

• I have 30 messages of my Web site users. How can I (1) Replay at ALL using an email. I can't reply to all allows me to respond to each person INDIVIDUALLY.

  I have 30 messages of my Web site users. How can I (1) Replay at ALL using an email. I can't answer all allows me to respond to each person INDIVIDUALLY, and (2) how can I get all the addresses of electronic mail from senders AFTER I FILTER my mails for a list of emails which can only from my site.

  I get tons of mail from my site, and I need an easier way to manage the workflow. each email open and copy the email address for 50 emails would be a lot of work. I just want 'select' all emails, do a right-click and enter all e-mail addresses from senders.

  And, as stated above... Send an email to all by a RESPONSE/option button.

  I found a solution. Updated my Thunderbird, and the app worked. I used v.11.

• Portege M750 on plu III Advanced Port Replicator

  The Portege M750 works on Advanced Port Replicator III more (PA3474E-1PRP)?

  Hello

  I discovered that the Express II port replicator is compatible with the Portege M750.

  I searched a bit on google and found this link to an Advanced Port Replicator III over the datasheet. But it s only in German.
  http://www2.inmac.de/inmac_assets/PDF/German/e569412_datasheet.PDF

  However, the M750 Poretge is not listed as a unit compatible and taken in charge.
  So I guess that more Advanced Port Replicator III cannot be used with protected M750 toghterer

  Welcome them

• Portage Z30-A-13W connected to the high speed Port Replicator III - USB problems

  Hi all.

  We recently bought a new Portage Z30-A-13W and Hi-Speed Port Replicator III.
  Setting network and graphics work correctly with port replicator, but the USB ports don't work at all.

  I tried the port replicator USB 2.0 and USB 3.0 and I can't seem to work with a keyboard, mouse, USB key or a mobile phone.

  In the case of mobile phones, it is also no output power of the ports that the mobile does not start to load.

  At any one another experianced this problem and what was the resolution.

  Thank you very much

  Jonathan Davies

  Hello

  As far as I know additional drivers are not really needed to use the USB ports.
  This is why I m wondering why don t USB ports work.

  It might be possible that ports high speed Port Replicator III USB are faulty, but to be honest, I can't imagine that all 6 USB ports may bad work at the same time.

  So maybe it s a software problem.
  First of all, I would recommend the default BIOS and check the USB legacy support for keyboard and mouse could be activated.
  After access to the Device Manager and remove / delete the USB hubs and controllers in the list of devices.

  Keep high speed Port Replicator III connected to the computer and restart the device.
  Usually, the system should recognize automatically deleted USB ports and must update the drivers of USB ports.

  I hope that the USB ports don't work after this short workaround solution.
  Keep your fingers crossed.