Preliminary questionnaire of unanswered questions

Similar Questions

• My questions are not listed under "Any activity" or "unanswered Questions".

  My forum message (s) is correctly displayed in the activity. A post - involving several exchanges with another remains participating forum pending no doubt because the participant has not been informed of my last answer - appears under "Any activity", but not under "Unanswered Questions", where it belongs. another post is not at all under any activity tab. And yesterday, I received an email from Apple to congratulate me on "from my first discussion" when I have been posting years! What is going on?

  Activity dates back only for a certain period of time - I think that it is about 2 weeks, but I have not tested.

  Try these links to your own content. The first three will be "BOLD" of discussions with unread comments

  The author of

  Has participated

  Suite

  RecentViewed

  See if these articles for help with the issue of the "specialty" - many of us found this extra layer of confusing gamification > tutorials

• Where is the support for the iPhone with some of these issues?  It's amazing that none of the iphone Tech responded to the unanswered questions.

  Where is the support for the iPhone with some of these issues?  It's amazing that none of the iphone Tech responded to the unanswered questions.

  This is a user forum. You to read the terms of use to which you agreed to when registering, you would have been aware that the participation of Apple here is minimal.

• Exam question-value of the point and unanswered questions about the VCP4 exam?

  Hello

  I have a few questions about the scoring to secure Channel 4 review system:

  1. All the questions on the exam are weighted the same?

  2. Is there a penalty for unanswered questions?  In other words, is it better to not answer a question, if you are sure that you do not know the answer, or take a guess if it comes down to it?

  Thank you very much

  Bryan

  Not responding not to an element, it is the same thing that answer wrongly as far as scoring is concerned, so it makes sense to guess rather than leave the question unanswered.

  With respect to the weighting, all elements have the same weight in the VCP exam, but some items do not count against the overall score.  These "dosed" items continually change and are chosen at random.  We insert elements assayed to determine the validity of the element until it became a party has received from the real exam.  If however, you want to treat each item with an equal amount of importance.

  Hope this helps,

  Jon C. Hall

  Technical developer certification

  [email protected]

  2077 Loma Linda way n., Clearwater, FL 33763

  727-446-8430 Office

  727-460-8448 Mobile

  Fax 702-554-3727

• Unanswered question

  Hello
  
  I'm a little confused about what "unanswered question", which is present at the bottom of the homepage of each forum. Now, according to my understanding, this means it has not been answered. No response at all.
  
  But why the next thread always marked as a question without an answer
  
  DB performance issue
  
  Or maybe I need some clarification.

  The icons to the left of:

  Question answer
  Open question with answer points still available
  Unanswered question

  Are the keys to symbols used in the second column

  If this answers your question then awars points and mark your question as answered ;-)

• How to identify unanswered questions?

  Hi all
  
  I always try to score a question that I put as answered when it is. I was looking at my profile and noted the following:
  
  Total Questions: xx (5 open)
  
  Because I thought I had scored questions, answers, how can I know which ones are unanswered so I can mark the answers?
  
  In addition, it would be nice that have be a link to a page that shows the links to the pending issues.
  
  Thank you
  
  JustMe

  If you click on the waterproof "Your Control Panel" link at the top, then click on 'Your Questions' on the top right of the resulting page, you should see your questions divided into two sections - pending and resolved.

  HTH
  Srini

• Labview unanswered question

  Hi all

  I searched the whole forum OR to get the answer to the next question. But when even couldnot get the answer.

  Which of the following only curve data in well-distributed intervals along the x-axis?  GraphB waveform A)) Government of waveform) XY GraphD) a. and b.

  (E) b. and C.

  The confusion is if option A or option D. But I guess that the answer is option A, as the waveform can trace a single value which is not distributed evenly

  Please check and give your comments.

  There should be no confusion on this issue. A table and a graph have one dt value that applies to the entire x axis. A chart and graph can only view the evenly distributed data, and it does not matter whether or not the data are acquired evenly.

• Linking to a project on a website - unanswered question

  Hi guys

  I posted the question below on the forum last week and have not received response - can anyone help please today?

  Hi guys

  I wonder if this issue is so obvious, because I have not found an answer on this forum, but I thought I should ask him to be totally sure that:

  I'm developing a series of projects of reactive nature, links to which I want to publish a Web site to be accessed from a computer, laptop, mobile or tablet. The way I imagine it could work it is that when I post a link will appear on this site where students can click on a laptop or a mobile/tablet device that would then play the relevant project in a separate window.

  AM I correct in this understanding and are there restrictions / traps I need to take into account. I am running with version 8

  Thanks for your help

  Hamada

  No worries, no worries. It is good to ask questions about the basic assumptions, especially if you are about to embark on a major project. What you have described is quite feasible. If you are having problems, it'll be because of server or hyperlinks issues (rather than anything intrinsic to Captivate).

• In the tutorial renders Sub unanswered question slides

  Hi, I looked through the last months of questions and do not exactly my problem.

  I have a Captivate 4 linear project and has questions (without partitions reported to LMS) throughout to reinforce learning.

  When a learner gets to an item in the series of quizzes and wants to return to a previous content slide (with OCD or arrow to the left on the navigation bar - I don't have arrow to the left of the Question slide itself.) they cannot return to the issue and take it. The question seems to be locked up and they get the error message below. It is a question that they never tried.

  

  I am not a "back button" on the issue because I don't encourage that, but I on the parameters of the Quiz "allowing travel to the rear. If the problem will be solved, then I'll add this button. I was wondering if there is another setting that I can change.

  The parameters of the question are:

  

  This is the incomplete feedback message by default.  I would check the number of attempts for the quiz.  I believe that if they leave the slide he woud be like jump, which is like a bad response. Which can cause the quiz to be omitted.  Have you checked the tab of failure pass under preferences of quiz as well?

• temporary table unanswered question

  Temporary tablespace issue
  I worked on tablespace temp for the last 4 days some of the question which are not clear about the temporary space
  (1) why is it that for optimal performance, the UNIFORM SIZE must be a multiple of the parameter SORT_AREA_SIZE if SORT_AREA_SIZE 4 m and ONE SIZE 32 m what impact on the reason for the performance
  (2) can be used in10g retractable or 11 g for the temp tablespace command
  (3) MAXSIZE UNLIMITED when I put this time deposited 32 GB it triggered error. Unlimited average as long as physical space is available it must measure but that's not why this limitation. It is the only one associated with the file temp or same problem occur if the data file size 32 GB?
  (4) if I know that my application to do a lot to sort out what is the best way to set up the temporary tablespace so that I don't up space error finished
  (5) ORA-01652: unable to extend temp by 4096 segment in tablespace TEMP this error occurs when I load the data using my application
  Please help in this regard, I am very grateful to you

  Adeel,
  I know VERY less, probably less when it comes to this forum. I know that just O of Oracle.I can not tell how long you take to learn Oracle as it depends on many things, how you study, focus, practice and above all, how much less you think you know. Because I meet a lot of people who think they know too that leaves no space for an extra addition of knowledge :-). I know really very low.

  If I use the LARGE folder to create a temporary space that doesn't solved my problem because I just read in the documentation if your block size is 8 k and OS 32-bit Platte basic form, you can size of 32 TB file. Using this approach I can fix this error condition
  Yes, bigfile can ovecome your space issue. But that could be cure a symptom. The real problem, is that why you do so much sorting that is not able to accommodate itself in memory and is traded on the disk. You should check with your queries and see if you can avoid some unnecessary sorts or things PGA.
  HTH
  Aman...

• I really need to talk to a customer service representative! unanswered questions about the site and the instructions, I can't access!

  my homepage windstream is not fair when I connect. help PG said click on firefox... Click on... Tools ect... There is no option that says all the tools!

  title edited by a moderator to get rid of excessive punctuation

  Hi rpitts,.

  You have the Firefox menu in the upper left corner? If you do, all you have to do is press Alt to temporarily activate the other menus. Which will give you access to the Tools menu.

  If you want these menus to be available at all times, you can go to Firefox > Options and activate the menu bar.

  Hope this helps!

• limitations of the web viewer (unanswered question - 1 week later... come on adobe)

  with reference to this article:

  "That an iframe the instance of the library is supported (you must have a web browser open on your page)."

  I try to publish a number of guides as an iframe on Surf Life site, one which is here:

  http://www.surfinglife.com.au/guides/travel-Bible-2014

  
  the next guide will be the wetsuit guide 2014, it is expected that he would have a different URL, for example: http://www.surfinglife.com.au/guides/wetsuit-Bible-2014

  the above limitation would restrict me to be able to present it on this separate URL?

  Thank you

  C

  Hi C,

  I apologize for the delay. The restriction does not only having more than one iFrame which contentviewer.adobe.com of frames on the same page. Given that your situation is hosting an iFrame on two different pages, this is supported. I hope this helps.

  Thank you

  Christine

• Back to questions left unanswered in the quiz in Captivate 7

  Hello!

  Client needed a quiz with delay. Now that it's done, he wants learners to be able to skip difficult questions, in order to meet more singles and then return to respond to those who still lasts.

  I added the buttons 'Next' and 'Back' so the learner can navigate between issues, but I can't understand how to show only unanswered questions.

  
  

  Could you please give any suggestions to solve this problem, or there may be a workaround solution, which would ultimately do the job?
  

  Only way is to choose the submit all the option, which means that the user decides when

  to enter all the answers at once.

• Questions unanswered in the Forum Flash Builder

  Hi Adobe - we have a few lingering unanswered questions in the Flash Builder forum.

  I am looking for a download link for Flash Builder 4.7 - for the non-CC version.

  OR

  Creative cloud version will work with my Flash Builder Premium of 4.7 serial number and do I just install it through the creative process of cloud?  I really don't want to go creative cloud at the moment - but I don't know if it's the same file in Flash Builder 4.7 anyway and as soon as I put my serial number, it will take me off creative cloud.

  So... looking for a download link for Flash Builder 4.7 for the serial number of my non creative cloud.

  Urgent-thanks!

  
  Dan

  Thanks kglad.  I ended up going with just the installer of creative cloud - which is very nice!  He installed Flash Builder 4.7 and then it was the trial version - so the next time I opened it, it gave an option to add a serial number - I did and it worked.  So I think we're good!

• Using questionnaires and branching

  I use 5.5. I often create projects that have several sections that can be taken in any order any. I usually create a slide menu and use either objects or click on the boxes for learners navigate the sections that they want to learn more. I would include a quiz at the end of each section. The problem I have is when you navigate to a quiz that occurs after a previous chronologically in the order of the slide, the first quiz says "You did not answer this question completely" when you get to it. So, for example, I have 4 sections. Section 1 starts on slide 4, section 2 of the slide 15 and so on. Article 2 1 is clicked, it ends and returns to the menu. The user then goes to Chapter 1, but when they get to the quiz, they receive the message "You did not answer this question completely" and are unable to complete the questionnaire.

  How can I fix it? I tried allowing infinite attempts, failure levels 0, etc. and I can't seem to figure out something that works.

  Thank you!

  No, I don't think that will not solve the problem, although he will get rid of the message.

  The issue is probably related to the scope of Quiz and since Captivate thinks he is then the user jumped outside the boundaries of the quiz is marking other quiz unanswered questions.

  It must be remembered that even if you split your project into distinct sections, if all the slides are in a single project file, Captivate think quiz questions in this file belongs to only one questionnaire.  The scope of the Quiz begins with the first marked object and ends with the Quiz results slide.  Once your user name entered this scope of Quiz, if they leave again for some reason, Captivate 5.5 considers then the quiz attempt as terminated by the user.  (Captivate 6 x did things differently here, but you're on Cp 5.5 so that's how it works for you.)