Presence not detected SD card cannot be formatted

Similar Questions

• no noise and the motherboard is not detecting pci cards

  Windows 8.1 installation failed due to corrupted iso file, then install windows 7. now I don't understand sound and motherboard is not detecting pci cards. everything worked fine before the windows installation 8.1.

  haven't installed the latest chipset drivers and the sound card drivers, stil no sound (mark of the Red Cross on the volume icon)

  motherboard: asus m2n - mx is

  What has gone wrong?
  How can I get my sound back and get pci cards running again? Help, please.

  Hello

  You must contact the Asus technical support to get the updated BIOS updated. Once that is done, try to install the necessary drivers and check the status.

  Note: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Additional information.

  This tutorial can help you identify and resolve its current problems in Windows, including no sound from your speakers or headphones.

  No sound in Windows: http://windows.microsoft.com/en-us/windows/no-sound-help#no-sound=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  Thank you.

• INTERAL card reader has not detected SD card on Media center m7160n Windows 7

  Hello everyone I hope that everyone is doing well unfortunately im not.

  IM extremely frustrated and I don't know what else to try.

  I advanced and installed windows 7 ultimate on a HP Media center PC m7160n on 1 GB ram

  He worked like wonders she even supports aero. What did eal very well until I tested the 9 in 1 card reader internal

  He just did not detect SD cards

  On my device manager, I see no warning anywhere and my drives F, G, H, I are listed as the "yellow" driver laptop drivers

  When I insert USBs automatic playback is fine but when I insert the SD card, nothing comes

  Any ideas?  It worked fine in XP

  Does windows 7 assigned the wrong drivers for the card reader? any advice would be extremely helpful

  I'm going to try the activation of the card chip on services.msc

  Also, sorry if this is in the wrong place.

  Thank you!

  I had a similar problem with a card on a hpe 130f reader. It turned out to be a faulty card reader.

• USB card reader does not detect memory cards

  memory card

  I do not have a slot for memory card but I have a usb card reader, but it just recently stopped reading all my memory cards? What should I do?

  Hello

  If you can't get the working card reader, you can use a card reader that is
  not expensive.

  -------------------------------------------------------------

  To check your version of Windows.

  Check with the manufacturer of system and their forums (if any) for known issues.

  Your other USB devices work?

  Try a system restore to before the drive stopped working if possible.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -----------------------------------------------------------

  If necessary:

  References to Vista also apply to Windows 7.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - anywhere in the area of white/white - point of VIEW, then-
  Show hidden devices

  Look everywhere EXCEPT USB controllers for your device and if find you them (maybe
  plus_d' one of each) under disk drives, you can have several - right CLICK and UNINSTALL
  for all instances.

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and methods of Vista and Windows 7 are the same
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick the three 1st choice
  to see if one is there.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  ----------------------------------------------

  This can be useful to determine if the wrong driver is loading.

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  I hope this helps.

• My 2842DVA SL410 does not detect the card top debit Mobile and WiMAX

  I bought the SL410 2842DVA and I installed windows XP Professional SP3 32 Bit. and it is always smooth. After I install all the driver and make sure that in Device Manager, there was no sign of yellow.

  I turned off my thinkpad and I turned my back, I found the small device left and I opened the box and I know it's card Mobile broadband. But this device has not detected in windows as I installed all the drivers.

  I flashed my BIOS version of 1.23 to 1.35, but still not detected.

  Please, someone knows this problem? Help me...

  Thank you. .

  Hi elpranto,

  Welcome to the forum!

  According to the description of your system, it did not come with WWAN card.

• PCMCIA wireless network card is not detected: 1058 error: cannot start service

  Help, please!

  I'm under WXP Pro for over 2 years and I've been connecting to the internet via a pc wireless card in my laptop with no problems PCMCIA slot. Suddenly last week, he started randomly disconnect and reconnect, and now it is gone completely.

  I bought a new WiFi card and still does not work. I checked the Device Manager and driver of cardbus PCMCIA works well as all other devices. The driver for the wireless card and another bound network drivers not start little matter what I try and how many times I try. I tried another laptop and my old card and once again work very well.

  The device driver I try to start have the error

  "Error 1058: the service cannot be started, either because it is disabled or because it has no enabled devices is associated to him."

  The card driver is installed, but not from, it is as if the laptop cannot detect or see the card in the slot

  Please help; I have difficulties to find someone with the same problem after a week of searching the Web.

  Hello

  This problem may occur if the service is disabled or if the service is disabled for the hardware profile you are currently using.
  To activate the service follow these steps:

  1. click on start, point to programs, point to administrative tools and then click Services.
  2. double-click on the service that is not started.
  3. click on the tab to open a session.
  4. check that the service has not been disabled for the hardware profile that you are using. If so, click Activate.
  5. click on the general tab, verify that the service has not been disabled in the Startup Type box. If Yes, click Automatic to have it start when you start the computer.

  What is described here in the article MS knowledge base
  http://support.Microsoft.com/kb/241584

• Alienware 17 - integrated graphics not detected in BIOS - cannot switch to the integrated graphics card

  As the title says, I own an Alienware 17, bought around November of 2013. My NVidia GeForce GTX 770 M runs like a champ. But I can't go to the integrated graphics card (should be Intel HD Graphics 4600). I tried the Fn + F5 (several times). It is said that it is "optimal". Tried with the laptop plugged in and not plugged. I looked in Device Manager and there is only a single index card (NVidia) view. I then booted the BIOS and it said: 'Integrated Graphics - undetected. " I have the latest BIOS version available on the support Web site.

  Don't know what to do at this point. I should have integrated and discrete, but only discreet is detected. I want to be able to switch to the Intel card, so that I can mess around with things like the Intel WiDi and want to also DO NOT perform my NVidia card all the time, and because I'm not playing games all the time.

  Any ideas? All support staff out there who can help out me?

  Cub... I think I might have answered my own question... My laptop has the option to display 3D 120 Hz. For this reason, 'Optimus' technology is not available (I think I say this right), and so I can't go to the graphics card Intel because of the way the 3D display is wired. There is a YouTube video that I saw what explains the all (link below).

  "Alienware 17 with 120 Hz 3D display has no integrated graphics":

  https://www.YouTube.com/watch?v=RJ3IRvCkllg

  Then... Not sure that I'm too happy with Dell right now. One of the advantages that I looked forward had to be able to change maps and play with some of the features of the Intel WiDi map in particular. When I bought the laptop, I was not made aware that I would lose the functionality of upgrade of the screen to get the 3D option. Would have been nice to know, so that I know what are the trade-offs.

• Win 7 Pro. Card reader not detected. Card reader does not appear in Device Manager, or the computer.

  Windows 7 Pro.  Dell desktop computer.

  My integrated card readers (there are 4) do not work.  They do not appear in Device Manager.  They do not appear in the computer.

  In Control Panel > programs and features > I uninstalled the Realtek card reader.  Then installed latest version of the Realtek site.

  Control Panel > troubleshooting > hardware and audio > configure device > says hardware changes could not have been detected.

  Tried system restore, but it failed.

  What should I try?

  Thank you

  Hi Bruce,.

  Thanks for posting your query on the Microsoft Community.

  With the publication of the description, I understand that the card reader does not work on your machine, Windows 7 Pro. I will certainly help you get this fixed number.

  I appreciate your efforts to resolve the issue.

  Since you've already tried several troubleshooting steps for the fixed number. I wish to inform you that this problem can occur because of compatibility issues. I suggest you refer to the suggestions of Work Sam Varkey responded on December 28, 2009 in the below mentioned thread and check if this is useful:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/memory-card-reader-not-working-with-Windows-7-x64/6f8f5122-70dd-48D4-A083-09fdef8612e3

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• Qosmio F10: Driver Installation does not detect the wireless network card

  I wonder if anyone can help before I phone supported again. My motherboard is dead and ASP replaced and recovered my laptop qosmio F10. Since having back, my wireless card did not work.

  Windows detects a "network controller" whenever it starts and gives me the opportunity to install it. I tried to install it by navigating in the 'tools and utilities' records CD rom for folders and subfolders of "Wireless network driver" and it still does not detect the card.

  I also tried to install using the cd rom web gui and selected the 'Pilot wireless network' link and then tried to install it. It opens a dos command prompt and try to install but comes up with the error "failed installation.

  I ran the customer service and they told me to run the qosmio recovery/then recovery of product/recovery of qosmio and again...

  I still don't the card wireless not yet installed. This happened to someone else?

  I tried already shot the drivers from the web, but with no luck... If a representative of customer service with the help of good technical knowledge that would be great, or if someone has encountered the problem too and he had fixed to the give me some advice...

  Thank you very much

  Sean

  Hello

  you see the card wireless as an unknown device in Device Manager? If this is not the case, perhaps that the card was not properly installed after replacing the motherboard.

  Sorry I have no other idea.

  Good bye

• Elitepad 900 microsd card not detected

  I'm having a problem with the use of the microSD integrated on the HP ElitePad 900.

  The Microsd card works on my laptop and works on the ElitePad when using the jacket of the expansion.

  When I insert the micro SD card into the microsd slot on the back on the Elitepad next to the 3 G SIM, Windows 8 does not detect the card.

  I'm using a Kingston 32 GB SDHC card.

  I solved this problem by buying a Kingston 64 GB SDXC card. This card works perfectly.

  I don't know what's the difference between a card SDHC and SDXC card, in addition to speed? The ElitePad seems to be only able to read a large map if it is SDXC.

• My laptop's built-in network adapter does not detect Windows 8

  I'm trying to share the internet connection from my laptop to another computer, but my laptop Ethernet card does not work. When I plug it in, the lights come on, but windows does not. It does not show it in device manager. I tried to install the driver, but it does not detect the card. Does someone know what to do? And the previous operating system, windows 7, worked perfectly with it.

  You may need to update the Ethernet card. Update from the manufacturer's Web site. Other possibilities include a problem with the connection that your ISP provides.  Hope this helps and if you need another post to help and we will be happy to help you.

  The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum.

  "When we try to pick out - something in itself, we find it hitched to everything else in the universe." -John Muir

• ESXi 5.5 NIC not detected

  I have an ASUS M4N68T-M V2 with built in network card, while I'm installing eSXI 5.5, I get an error of not detected NETWORK card. an advise please. Thanks in advance :-)

  I can't tell you if the NETWORK card works with older versions of ESXi as he is not on the list of supported network cards. You can try if.

  Anyway, other users on the forum succeeded with an adapter Intel Pro/1000 GT desktop, you may be able to get at a lower cost. From what I have found, your motherboard has two PCI slots, so it could be something to consider.

  André

• Adapter not detected network - need help ASAP

  I want to install ESXI 5.5.0 on a HP HPE-170 t for test purposes and for a reason that the network adapters are not detected... I tried both ESXI 5.5 base ISO, then the custom for ESXI 5.5 HP image and both do not detect network cards.

  I need this resolved as soon as possible.

  Ideas or recommendations or solutions possible?

  Evening,

  There is no easy way to solve this problem since the HPE-170 t is not on the HCL.  I think you have two options:

  1. install a NETWORK adapter that is on the HCL and install 5.5

  2. write / find a driver for your network card and install it in a customized image of ESXi.  Then install ESXi

  Sorry that I have not better new... you can also run Vmware workstation on this machine and run ESXi as a virtual machine... that's my way around the HCL.

  Thank you

  J

• Sims 3 (win7) and "device 0 cannot run this title, no video graphics card supported not detected."

  Hello

  I just got the Sims 3 for Christmas, and I can't get it started.

  I just bought a new p7-1126 of hp computer that meets all the reqs as documented on the site of AMD System. (win7 64 bit, 1 TB hd, 6 GB ram, amd quad core 2.4 GHz processor)

  This computer has an amd radeon hd 6550d graph with / 3 gb (I think) (which is more than 128 MB recommended)

  and the drivers are up to date.

  I get the error message "device 0 cannot run this title, no video graphics card supported not detected" and I can't seem to do anything to solve this problem.

  I've uninstalled and reinstalled the Sims3 deluxe/ambitions three times now, with the expansion of ambitions installed so the third time.

  I did a lot of other things as suggested in line when I did research but nothing works.

  Help is appreciated and I hope we can get this fixed a problem. Thank you!!

  Hello

  Please provide information of the log of the event viewer.

  Information on the Event Viewer log shows that there is a problem with your memory (0xc0000005 error code).

  I suggest you run a diagnosis of memory on your computer and check if all goes well.

  Click on the links below and follow the instructions on the article to test memory on your computer.

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-know-if-my-computer-has-a-memory-problem

  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-memory-problems-on-your-computer

  Provide us additional information. So that we can help solve you the problem on your computer.

  Hope this information helps you.

• SIM card cannot be detected on thinkpad 10

  I have 10 Windows installed on my thinkpad 10 PN 20C3001QAU Australasian model. Sierra mobile network is installed. The system does not detect the SIM card installed, but the Device Manager indicates that the mobile system works properly. I tried the SIM from my phone, but with the same result. This is the first time a SIM card has been inserted in this cushion. Wireless details are

  Model: EM7345 4G LTE

  Firmware: FIH160_V1.1_Modem_01.1349.12

  Type of GSM network

  Help with this problem would be appreciated gratefuuly.

  A problem has been identified where a SIM card cannot be detected in systems equipped with an adapter WWAN of EM7345 on Lenovo ThinkPads. For this particular issue, no SIM card is never detected.

  For help on this issue, please contact the Service of Lenovo for support and Service TIP #SF16-T0076 of reference / HT # HT501750.

  Thank you