preventivo per cavo codice D2M62 sas controller

Similar Questions

• Request preventivo per batteria Controller PERC 6 / i by PowerEdge 1950 Server

  Buongiorno,

  come da oggetto sono a take UN preventivo per sostituzione di una batteria per controller it PERC 6 / I integrated by a server PowerEdge1950 in quanto it software Dell di administration lo tell in stato FAULT, low voltage.

  Speaking saluti.

  Buongiorno,

  the batteria Può acquistare online:

  Accessories.euro.Dell.com/.../ProductDetail.aspx

  Oppure take it supporto a pagamento tramite questo link:

  www1.euro.Dell.com/.../SS

  Todas

  Marco

• Z820 with LSI 2308 sas controller will not publish with intel PCIe SSD installed.

  Z820 with LSI 2308 sas controller will not publish with intel PCIe SSD installed. The system works fine with Sata 600 pro SSD for windows and WD 4 TB Black seagate for storage. When the Intell 900 PCIe SSD drive is installed the system hangs at the LSI Mini OROM screen remains white. is there a way to put the LSI controller to jump the PCIe slots for boot devices?

  2 X Xeon 2695, 64 GB Ram, graphics Nvidia Quadro K5000, 2 X Intel 10 GB Ethernet card.

  Thanks for the reply. In fact I've disabled the LSI controller and connected to the integrated SATA controller and the Z820 starts and works perfectly with the PCIe SSD installed.

  Thank you.

• 'Lost connectivity to storage device' on a SAS controller is installed locally?

  Hello

  I have two HP Proliant DL380 G6 installed with custom HP ESXi 5.5 U2. Both machines have an internal HP SmartArray P410i SAS controller on board, and I've added a second controller P410 that is attached to a secondary drive frame. In the first cage of readers, I have a disk array and in the second, I have a table over a disc other than whole for this test.

  On both machines when I boot the system recognizes both controllers and diskarrays and data warehouses, but after awhile, it loses the connection to the datastore2 which is the table two caged. The individual disc also disappeared, but since there is no data store created on this one it is not reported.

  I got the first started server once and after about 4 days, the second data store has disappeared. After I stopped the machine and started another but it was the same thing. About 4 to 4.5 days and the data store has failed. The only material I have swap between the two machines are the disc itself, everything is installed locally and therefore replaced when I swap server.

  Before I installed ESXi I got the machine to start a Windows Server 2008 R2 with the HP drivers and I have not had any problems for about a week. Because if this, and because the only thing that is used in the two server are the discs I'm tempted to think it's not a hardware problem. (I added the only drive two caged to see if it is the matrix of discs that crashes or all in the cage.)

  After the last restart, I created a few screenshot with all works very well and now I added a few photos more with my discs/data warehouses has failed. I have no idea what I'm doing wrong, but maybe someone could give me a clue of which direction, I need to continue the investigation. Any help is appreciated. Thank you very much.

  best regards, Markus

  5.5 U2 contains HPSA.74, which does not work with P410i. Upgrade to HPSA.84 or downgrade to HPSA.60. + updated firmware for something more recent.

• Quotazione cavo by md3000 sas Richesta

  Salve,

  chiedo cortesemente quotazione di UN cavo per collegare sas an ad una scheda MD3000 sas 5/e.

  Grazie

  Buongiorno,

  Può acquistarlo directly online

  Accessories.euro.Dell.com/.../ProductDetail.aspx

  Marco

• Preventivo per risoluzione su problema unita PowerVault LTO5 request

  Description problema: the Ultimo nastro di inserito backup e anything bloccato all 'interno dell' Unità e non e più possibile only estrarlo it looping di espulsione relativo. It displays da codice di error 6. Unita e gia stata replaced in passato per lo stesso problema, quando era ancora in co.

  Service etiquette: H7VD002

  Order number: 431606436

  Giacomo Caramanico

  Administrator COMPUTER - Weatherford Mediterranea S.p.A.

  085 9051698 - Mobile 345.4746555 interno

  Buongiorno, the sto contattando by mail

• How can Cisco ucs c220 m4 I start with 12g cisco sas controller? 2012 UEFI Server installation issues

  first time with cisco ucs c220 m4, check my photos

  You have a VD 11TB.

  Only way to start on this is by using UEFI.

  You need to activate UEFI in the boot order.

  Anything over 2 TB and more 4 K sector size readers require the UEFI boot option.

  BIOS will not process the VDs when manages UEFI.

  Kirk...

  Summary for those who seek a similar question:

  • Client a large VD created, 11TB
  • 2 TB and more, 4K sector drives, require boot UEFI + GPT, cannot use the legacy/MBR
  • To set startup to local HD option, that referenced the PCI-E Slot, the raid controller was in (HBA slot in this case)
  • UEFI mode, can't score a VD as "bootable disk / startup.
  • You will see not the VD/raid controller appear in the 'real' boot order during the OS install.
  • Once the installation of the OS compatible UEFI is made, it will create a UEFI boot to the operating system "Windows Boot Manager" entry in our case.
  • After the next reboot, if you check your boot order, you should see this UEFI OS boot manager entry.

• Batteria per PowerEdge 2950 [MS] 6i controller

  Buonasera, abbiamo UN powerEdge 2950 tell di batteria del controller Perc 6i auswechseln che a bordo. Può inviarmi tempi di delivery e quotazione del componente?

  Use e mail: [email protected]

  Grazie e buona serata.

  Eseguito ordine: th di Ricevimento Ordine: customer 292356836: 3228826 - INTERLINEA S.R.L. N ° di Re: 15440626

  Speaking saluti

  Manual

• PCI - E 1 x SATA/SAS controller

  Hello world.

  I have ESXi willingly running on an ITX motherboard.  Only sata ports complex 4 chipset and currently all 4 are used.  My chassis will take care of the other 2-3 readers in its current configuration.

  I have not seen all PCI - E 1 x SATA/SAS cards that will work ESXi 4.  Does anyone know of one that works?

  ID prefer to stay away from Silicon Image if possible (do not have a pleasant experience in the past) but if it works, it works.

  The card would not have to be on the official HCL.  I'm happy with compatible whitebox.  It is a home server.

  Thank you.

  There are very inexpensive NAS pregnant sub $100 or find an old PC. Lots available for free.  Have you looked at http://vm-help.com for achievable controllers?

• VMWARE ESX VMFS 3.5 Volume down in the SAS controller

  Hi all

  I have a very BIG problem:

  an ESX host repelled a VMFS3 (1 tera bytes) Volume 1, wen I restart the server, the volume is empty!

  Help me please!

  Felix

  Yes.  If you have paid for support, use it!

  If you have found this question to be good, or useful, don't forget to award points.

  Dennis Procopio - VCP

• Dell Precision 5400 - Problema aggiornamento firmware RAID LSI Logic for Dell SAS 6 iR controller

  Assistenza Tecnica Dell company,

  only recently ho avuto disco SAS Seagate Cheetah 15 K, pertanto it SAS controller mi segnalava che degradazione of the proclamation of the United Nations of the UN problema del Volume sul quale era misconfigured it suddetto disco.

  Ho labor-intensive UN uguale disco, stessa marca e modello e versione firmware (S527) di quello nel present RAID 1, recoupling the configurazione del nuovo volume non e consentita, perched there controller individua it firmware del nuovo disco como S52A instead S527, come scritto anche nella targhetta present sul disco stesso.

  Conseguentemente, pensando che if trattasse di one problema al legato firmware led controller (SAS 1068E FW 0.20.48 - IR) sono stato web sulla pagina Dell, del supporto relativo al oggetto Office (serial number: ), ho aggiornamento di downloaded it pilot, my film camera durante he message:

  SASDupie.exe-> ' Impossibile find it punto di ingresso RegDeleteKeyExA della procedure nella libreria di special dinamico ADVAPI32.dll.

  A seguito di this error the TR sommergibili interrupted e quindó non e possibile procedere con controller aggiornamento del firmware del.

  In attesa di una risposta in merito, Corinne occasione per porgere Web saluti.

  Antonio Morrocchesi

  Buongiorno,

  questo forum e exclusively by server and sistemi per ricevere assistenza by it is reported (Precision Workstation) is University 02 57782690 lo.

  Speaking saluti

  Manual

• Dell PowerEdge 1950 fuori co - sostituzione controller SAS [MS]

  Buongiorno,

  We have a problema con uno dei nostri Server PowerEdge 1950 (anno 2006): I brain rigidi are non più riconosciuti e sospettiamo che tratti del RAID SAS controller if. Vorremmo ask UN preventivo by a componente sostitutivo is possibile.

  Want cortesemente in pre-empted.

  Speaking saluti,

  Mario P.

  Buongiorno,

  Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could mandarmi come message privato di seguito required information?

  - Service tag del Server

  By the spedizione:
  1. company name:
  2 address:
  3 City:
  4 Provincia:
  5 cap:
  6 name/last name/number phone/e-mail del referent in loco:

  With the fatturazione
  1 nome società:
  2 via:
  3 City:
  4 Provincia:
  Heading 5:
  Name/last name/number 6 telephone/e-mail del referent by the fatturazione:
  7 partita IVA

  Speaking saluti

  Manual

• Workstation HP Z620: Z620 controller SAS Windows10

  I just updated my OS to Win7 Pro Win10 Pro.

  I checked the equipment in System Info and I saw that the SAS has nomore controller a good pilot installed to work.

  In the support page, I have not found a new version of the SAS for Win10 drivers...

  How can I solve the problem?

  This is the driver missing a big problem?

  Thank you in advance.

  You are the very welcome.

  I have compressed upwards and attached to this ID SAS controller driver to the bottom of this answer...

  You need to install it manually.

  Download and uncompress the file in its folder.  Don't do anything with the files in the folder.

  Go to Device Manager and click on the SAS controller requiring driver.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the driver folder, that you unzipped.

  Make sure that the include subfolders is selected and the driver should install.

  Restart the PC.

  This is the driver I got the file from your PC support and driver page.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5225039 & swItemId = wk_151465_1 & swEnvOid = 4158 #tab1

  Here's a partial copy and paste hardware ID's taken in charge by this driver.

  % Intel_SAS_RAID. DESC = Intel_SCU_iaStorS_Inst, PCI VEN_8086 & DEV_1D60 & CC_0107%
  % Intel_SATA_RAID. DESC = Intel_SCU_iaStorS_Inst, PCI VEN_8086 & DEV_1D61 & CC_0107%
  % Intel_SAS_RAID. DESC = Intel_SCU_iaStorS_Inst, PCI VEN_8086 & DEV_1D62 & CC_0107%
  % Intel_SAS_RAID. DESC = Intel_SCU_iaStorS_Inst, PCI VEN_8086 & DEV_1D63 & CC_0107%
  % Intel_SAS_RAID. DESC = Intel_SCU_iaStorS_Inst, PCI VEN_8086 & DEV_1D64 & CC_0107%
  % Intel_SAS_RAID. DESC = Intel_SCU_iaStorS_Inst, PCI VEN_8086 & DEV_1D65 & CC_0107%
  % Intel_SAS_RAID. DESC = Intel_SCU_iaStorS_Inst, PCI VEN_8086 & DEV_1D66 & CC_0107%
  % Intel_SAS_RAID. DESC = Intel_SCU_iaStorS_Inst, PCI VEN_8086 & DEV_1D67 & CC_0107%
  % Intel_SAS_RAID. DESC = Intel_SCU_iaStorS_Inst, PCI VEN_8086 & DEV_1D68 & CC_0107%
  % Intel_SAS_RAID. DESC = Intel_SCU_iaStorS_Inst, PCI VEN_8086 & DEV_1D69 & CC_0107%
  % Intel_SATA_RAID. DESC = Intel_SCU_iaStorS_Inst, PCI VEN_8086 & DEV_1D6A & CC_0107%
  % Intel_SATA_RAID. DESC = Intel_SCU_iaStorS_Inst, PCI VEN_8086 & DEV_1D6B & CC_0107%

• Precision T5600 SAS/SATA Controller Driver

  I recently received the workstation Precision T5600. The original configuration was the installation in RAID 1 with 2 SATA drives. I killed the RAID and loaded a single drive SAS instead of RAIDs. When I loaded a Windows 7 installation disc, windows could not see all of the hard drives. So my question is there a place where I can download the driver for the SATA/SAS controller and throw on a USB to load during the installation process of Windows 7?

  Thank you.

  Dell Dear user community.

  I having the same problem as jHartweck,

  I recently bought the Dell Precision T5600, but I'm not able to install Windows 7, because the SATA/SAS controller driver is not available.

  Someone of you managed to solve this problem?

  I'm looking forward to your reply.

  Sincerely,

  Micha Joosten

  Administrator COMPUTER

  Logistics engineering INTHER

• PowerEdge 860 controller SAS [MS]

  Salve,

  HO a PowerEdge 860 to 10 anni ormai di server.

  ORA funziona più non, non riuscendo a caricare it SB

  Andando ad analizzare he problema nelle schermate went departure della macchina machine error: PCIe training error slot n.2

  Andando an all'interno vedere della macchina lo 2 e occupied dal del tipo UCS-51 SAS controller slot.

  Andando a try another seeing it controller knew a slot (it n.1) he di riporta ora error message: PCIe training error location n.1

  Da questo Può avere una enough tell che if he problema sia it controller stesso.

  Problema viene ora di it come our controller of it, che in Italia non seems easy find.

  Grazie,

  Emanuele

  Salve,

  processato ordine: th di Ricevimento Ordine: customer 292356315: 2907508 - ARCHIMEDES LOGICA SRL N ° di Re: 15439131

  Speaking saluti

  Manual