VMWARE ESX VMFS 3.5 Volume down in the SAS controller

Similar Questions

• VMware ESX server CPU use test alarm

  Hi all

  For a new client, I need to show the alarm and ticket slot functionlity vmware ESX server logging settings

  • Use of the CPU of a server ESX VMW
  • Use of memory for the server ESX VMW

  While I reduced the threshold value of VMW ESX Server CPU use as beloow format

  WARNING - 5% and STDev.warning - 0

  I made this two days before configuration, but still no alarm generated for this rule.

  Help the creation of a test of the abveo metric ESX alarm

  Hi - I ended up having to do such things in the past as well. I just built a virtual machine added lots of processors and memory, then for the CPU, I used the script CPUBusy.vbs from VMware (Google search which) and down it load times so that he began to max real physical processors... For memory, I just opened a massive text file in Wordpad and scroll up and down it. This gave me the circumstances to test the alarms, just don't do as a busy time or use some dev ESX servers... Danny Bravo

• VMWARE ESX 4.1 Intalalion failed while loading additional driver

  I try to install esx 4.1 and while he reached to the point where it asks me to load additional drivers as NIC I put the CD of NIC driver, but it does not appear by clicking on 'Add' rather than it gives message "the CD provided is not a valid VMWARE ESX driver CD". I went to the command mode issued the command ls-l/dev/cdrom, but he said no directory, please help me I am very new to VMware.

  Welcome to the forum.

  my NIC realtek 8111D and TP-link TF-3200, I downloaded the drivers linux for them.

  ESX/ESXi is not Linux and drivers Linux won't work on it.

  You must have VMware driver, otherwise the unit does nothing.

  I know Realtek card does not work on ESX/ESXi...

  André

• How to install Fedora core 9 on VMware ESX 2.5 or 3.5?

  Help

  I need to try Fedora 9 on VMware ESX 2.5. I came across the problem "Probing ESD (ESD = off)...". » !. I use the "boot-fc9 - 3.71 - pre6.iso.

  It would be no different.

  Thank you.

  Thread moved to VI: forum Virtual Machine and the guest operating system.

• VMware ESX 3.5 and MSCS

  Hi all

  I noticed the MSCS in the release notes for ESX 3.5 indicating that VMware is not supported in this version

  http://www.vmware.com/support/vi3/doc/vi3_esx35_vc25_rel_notes.html (about halfway)

  Is there an official answer as to why this is, it is not supported?  I'm running on 3.0 production systems in this scenario, and I fear that an upgrade will cause problems

  Any help would be apprecated

  3.5 MCSC 1 update is supported

  Support for Microsoft Cluster Service (MSCS)

  VMware ESX Server 3.5 Update 1 supports the Microsoft Cluster Service.

  Support is similar to ESX Server 3.0.1 with the following additions:

  -The customers of Windows 2003 64-bit and 32-bit are supported with MSCS.

  -Start-up of the SAN for virtual machines by using MSCS is now supported.

  -The majority node set of clusters with application-level replication (for

  for example, Exchange 2007 Cluster Continuous Replication (CCR) is now

  supported.

• Mapping of LUNS ESX - id scsi is not consistent across the cluster - problem or not?

  Hello

  as a parenthesis in an associated storage workshop, the instructor said that on some site of the client, there was silence damaged metadata vmfs happening and the reason for it was locking issues that concerned the fact that the SAN LUNS Hat different scsi id on different Cluster nodes.

  I asked for references for this, but I got information on the verification of metadata etc.

  now, the reason why I'm asking here is, I found that some in our environment vmfs data warehouses do not have compatible scsi-id numbering on the Cluster. I thought it was just mostly a cosmetic problem...

  Two questions:

  1 are warehouses of VMFS data really at risk with this? Any reference to a KB or some experience on site? We have never had a problem with the warehouses of data so far.

  2. about the setting of this (we do it anyway), which is the recommended best practices to do?  Shouldn't a data store with a different ID Scsi remapping result in the data store that is detected as a snapshot?  Think we need to do some additional precautionary measures to avoid what is happening

  Thank you!

  regads

  Roland

  Take a look at this article for possible problems: VMware KB: can not see some or all VMware vCenter Server or VirtualCenter storage devices

  A requirement is to have uniform or a coherent presentation of the LUNS across managed VMware ESX servers. More specifically, must match the LUN ID for each respective LUN between all of the VMware ESX servers.

• move volumes of storage of 2 controller controller 1

  Hi guys,.

  I want to pass some volumes through to the other controller to redistribute space, as everything on controller 2 is to complete research.

  What is the best way to move overall, then the data on the disks of controller 1?

  Controller 1:

  

  There are 2 ways for this survey:

  1. license replicate if you can replicate a volume of Compellent to Compellent 1 2, and then delete on 2 Compellent in order to free up space.

  2. choose 1 2 Compellent volume which should be move free space - we call it as Volumea. Create volumes on 1 Compellent, onto a server (which has the Volumea). Data copy of its new volume (copy OS level). Remove the Volumea on 2 Compellent.

  You can also expire the replay, delete any volume of United Nations-use on 2 Compellent.

  Rgds,

• VMware ESX does not recognize the local RAID volume

  Hi all

  We are running VMware ESX 3.5 Update 3 on a G4 HP Proliant DL 380 with a Raid Smart Array 6i controller (this is our test platform).

  Since the VI Client, it is not possible to add a data store that corresponds to a local 200 GB Raid5 volume.  I can see this disc in the "Storage adapters" section (path: vmhba0:1:0, LUN ID = 0).

  We have updated the firmware on our server is no problem of conformity between VMware ESX and such old material?

  Thank you very much in advance for your help

  Connect directly to the server and try to create this VMFS volume?  I noticed on VC 2.5 that whenever I have create a server and try that he does not see the space when I try to add storage.

  Direct connection to the host ESX with the VI Client works every time...

• VMware-cmd/vmfs/volumes/storage... / createsnapshot does not work on vSphere?

  VMware-cmd /vmfs/volumes/storage/VM/VM.vmx createsnapshot 'name' brief quiesce of "description".

  This comes with the error below.  Worked absolutely perfect with 3.5*.

  Traceback (most recent call changed):

  File "/ usr/bin/vmware-cmd", line 88, in?

  main()

  File "/ usr/bin/vmware-cmd", line 63, in hand

  operationName, result is CommandProcessor.Process (host, args)

  File "/ usr/lib/vmware/vmware-cmd/CommandProcessor.py", line 11, in the process of

  result = operation. DoIt(*processedArgs)

  TypeError: DoIt() takes exactly 7 arguments (13 given)

  Change the words 'suspend' and 'memory' to 1 or 0 (enable or disable).

  Marcelo Soares

  VMWare Certified Professional 310/410

  Technical Support Engineer

  Globant Argentina

  Review the allocation of points for "useful" or "right" answers.

• How do you know what was the latest patch installed on VMware ESX Server 3i, 3.5.0 207095

  Hello guys,.

  I've been running an old server that was installed in a test system on workstation DELL - Optiplex GX620 (32 bit).

  During installation, I had to confirgure the file: /usr/lib/vmware/installer/Core/TargetFilter.py to change the following line:

  "interface returned. GetInterfaceType() == ScsiInterface.SCSI_IFACE_TYPE_IDE' as follows:

  "interface returned. GetInterfaceType() == ScsiInterface.SCSI_IFACE_TYPE_ISCSI' this is it worked and I used it for 3 years now. However, right now, I was hoping to be updated with the latest patches and updates and I do not know if I just ESX or ESXi, or what was my last update, and what it takes then.

  I used this command to get the following result:

  # vmware - v

  VMware ESX Server 3i 3.5.0 build-207095

  ... I think that the 3i says I have an ESXi 3.5.0 but build 207095 the buid even as ESXi 3.5.0 patch 5?

  If this is not the case, how should I do to update? What is the KB # I should download?

  I can manage using vSphere Client 5.5 and I can't SSH using PuTTY.

  Note: When I run... "# esxupdate - bundle = ESXe350-201302401-I - SG.zip updated ' of in the folder where his property in the data store, nothing happens... just a new line scrolls.

  Also...

  # esxupdate query

  <? XML version = "1.0"? >

  <>request-response

  < installed packages >

  < package ID = "ESX-207095" >

  firmware < name > < / name >

  < version > 3.5.0 < / version >

  < rel > 207095 < / rel >

  < / packages >

  < package ID = "ESX-CLIENT-204907" >

  < name > viclient < / name >

  < version > 2.5.0 < / version >

  < rel > 204907 < / rel >

  < / packages >

  < package ID = "ESX-TOOLS-207095" >

  < name > tools < / name >

  < version > 3.5.0 < / version >

  < rel > 207095 < / rel >

  < / packages >

  < / packages installed >

  < / request-response >

  # /vmfs/volumes/525300ce-5ff6ad3d-e2ed-0014222aedb7/patches/ESXe350-201302401-O-SG

  ... is there any update for this system? I therefore believe that the patch software etc was not around when I was installing this server in 2010.

  Based on KB http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1014508 you run ESX 3.5 Update 5.

• Update disk in VMware ESX 3i

  Hi all

  I recently replace the SATA 7.2 K six drive in my PowerEdge server for six SAS 15 K disks. Previously, I did my VM then restored for the new RAID volume 50 and backup. But when I start the virtual machine (centos 5) and run ' dd if = / dev/zero of = testfile2 bs = 8192 count = 12207 "the almost the same result I had with the SATA disks. My question is: VMWare ESX 3i immediately recognize the new SAS drive? Or maybe it's write the disc with the previous speed?

  Thank you and best regards,

  Amedina

  DD may be not the best tool to test the performance. In theory, the SAS drives, if you get more IOPs, dd wrote only (sequential).

  RAID 50 with only six readers isn't a really good choice either.

  Depending on your RAID controller (Perc xx? with battery backup cache write?), the bottleneck is not the disks, but the controller itself (calculation of parity on the two RAID5) and striping on the RAID50.

  Think about another provision RAID (8 disks RAID10?) and another test tool.

• VMware ESX 4.0 Update 1 with HP LeftHand P4500 Thin Provisioning (SAN based and client based?)

  I know with ESX 4.0 that you now have the option to select a provisioning on the side of ESX.  I'm already thin provisioning my LUN on the left side.  I do both or just the side SAN?  Also, I heard some people say that it is better to use a block size of 8MB for best peformance of SAN, do you think it is recommended/best practices as well?  Thanks in advance.

  The point to offer 8 MB block sizes is flexibility.  Because you cannot change the size of the block without reformatting the VMFS file system, you probably don't want to need to.  There is a great overview of a few points on this theme to the yellowwire from bricks.  I recommend you start here and follow the links.  It only takes 5-10 minutes, and you will be able to make your own choices.  For us, we're all migrate to blocks of 8 MB.

  What about thin provisioning, I have no practical experience.  But here's my point: If you sell thin anywhere, you have a more complicated system to follow in terms of space put into service and space required.  Must be taken account of this that data may coming in the future, or you might run out of space.  So, I ask you where you want to configure the monitoring of the use of space and how you want to administer the storage.  If you want to do on the primary server, and then stick with that.  If you want your VMware administrators to manage management, then do it in VMware.

  My recommendation: If you're already doing it on the back-end successfully, then stick with what you have.  Whatever it is, do it only in one place.  Otherwise, you're probably too complicate your configuration.

  Virtualization of happy!

  JP

  Please consider awarding points to useful or appropriate responses.

• VMWare ESX 4 on HP DL380 G6 Server

  Hi all

  I have following specifications of the server

  2 * quad core processor

  24 GB of memory

  8 * 300 GB hard disk (RAID 5)

  P410i controller with 512 MB BBWC

  4 * network card

  VMware ESX does not detect the hard drive. He didn't tell me that 2 TB drive and logic, but it is grayed out.

  Is that VMware supports not more 2 TB then? I like to keep all drives in RAID5, but if he can't then I guess I need to split them into two RAID 5.

  Thank you

  Hello.

  ESX does not support the 2 terabyte - 512 bytes or more large LUN sizes.  This is explained in KB 3371739.

  As you said, you want to create two RAID 5 volumes.

  Good luck!

• VMware ESX 3i

  Hola a todos, el otro dia para me el Vmware esx 3i baje probarlo. Thought that era free pero el caso s when

  Entro con el Vmware infrastructure me indicates that only 40 dias of probarlo.

  MI pregunta're, no free era?

  In case of ser asi as tengo that hacer para himself? Yo-meter el series pero me indicaba that

  podia perder funcionalidades.

  Esto afectaria a las 4 maquinas office than I currently have?

  Gracias.--

  Hola Checkjes,

  The free ESXi can be version - solo includes VMFS is SMP - o Pago, if adquieres una las different licenses that exist today. Note that con version "not free" no includes soporte aunque podras fornuis esta el futuro siempre as friendly version y need na business como VMotion, HA, DRS o, etc.

  The version that got descargado siempre esta en modo lo assessment you permite test todas funcionalidades of VMware por 30 dias.

  Contacted con VMware.com para una request license gratuita para ESXi

  Saludos,

  Jose Maria Gonzalez,

  Founder and president of JmGVirtualConsulting.com

  -

• Configuration of VMware ESX 5.1/5.5 pass through for PowerEdge 2970

  Hello

  I tried to configure VMware ESX 5.1/5.5 pass through for a 8 GB Qlogic FC HBA on PowerEdge 2970 server.

  Even after activation of the virtual technology in the BIOS, the PCI device is not listed in "Advanced settings" to configure pass-through. Attached screenshot shows the current setting of the processor.

  Y at - it all the additional steps required to configure it.

  Concerning

  E.

  Hello Sara

  You're talking Direct path IO or single root i/o virtualization? If so, none of these features are supported on the 2970 system.

  http://www.VMware.com/resources/compatibility/search.php

  I don't think that or the other of these characteristics were available until our 11 generation systems.

  Thank you