Similar Questions

• SETUP-EPRINT PRINTER COMMUNICATION FAILURE

  LaserJet CP1025nw - I used to print my eprint software, but after updating firmware, everything went wrong. print the status page, no IP address and no network. Printer was uninstalled, reinstalled again. connected to the router; got the new IP address. checked to be in the same network with the router and the laptop; HP Connect recorded for eprint; eneterd assigns the code and adds the device to my account eprint. tried to print when the usb cable is attached works very well.

  The problem is when I try to install the eprint application it shows my printer with the correct IP address but then in the next step it keep saying "communication failure". I disabled windows firewall and no proxy is installed; always impossible to communicate. I have two laptops; working with windows 7 and the other with windows 8. Both has the same problem. I tried all the solutions I found on the HP site but without success. It made me desperate. It is the last solution for me before leaving this printer to buy a new one.

  Hi BAKJAF,

  Welcome to the Forums of HP's Support.  I understand you get a connection error message when you try to activate the web services of your printer, regardless of which computer you are using to enable web services.

  Please define Manual of the printer an IP address manually and DNS servers.  The steps are in the

  Document of the printer is not maintaining the wireless connection .  Look in the Windows section for "three Solution: the printer of the assign a static IP address.  The manual preferred DNS server please use 8.8.8.8 and 8.8.4.4 use for replacing manual DNS server.

  Once you have configured the IP address manually and manual DNS servers please try to enable web services.

  Please let me know how it goes.

• Cannot install the program, the error message: Server error 145905 [invalid header] communications failure

  Original title: communication failure 145905 [invalid header]

  When you try to install a program I always get this error each time message: Server error 145905 communication failure [invalid header] would appreciate any help that anyone can provide. Thank you.

  Hello

  That is the application that you are trying to install?

  I suggest you follow these methods and check.

  Method 1: Run the hotfix to correct the following problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

  Method 2: Perform the clean boot, try to install application.

  Follow the suggestions of this link.

  http://support.Microsoft.com/kb/310353

  NOTE: Once you check the functionality, follow the suggestions under steps to configure Windows to use a Normal startup state.

  If the problem is specific to the program, I suggest you please contact the manufacturer of the program for utilities.
   

  I hope this helps!

• Photosmart HP 6520: HP Photosmart 6520 guard display the Message "printer 0xc19a0035 failure."

  I have a HP Photosmart 6520 printer which I have owned for almost 2 years of new from Currys and PC World.

  Everytime I turn on my printer it keeps showing an error message saying "out of printer 0xc19a0035. I looked at a few forums and followed the steps, but still no result. Also, about 2-3 months ago, I put in a new genuine ink cartridges and still the message keeps popping up. I don't think that I left on the printer as it's been 2 years since I bought it warranty.

  Hi @Taef,

  I read your post and see that you have found an error 'printer 0xc19a0035 failure '. I want to help you solve this problem. If this helps you to find a solution, please click on the button "" accept as Solution"" down below this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I was not sure what steps you have tried so far, so I'm including all the documents that can help with this question.

  Here is a document for the reset of the printer.

  HP printers - solve the 'problem with printhead,' "Printer failure," "Ink system failure," or "0 x...

  Here is a document to manually clean the contacts of the cartridge. Do not take into account the title.

  "Incompatible cartridge" or "indicated ink cartridge needs to be replaced" poster for HP Deskjet I...

  If there is anything else I can help you, let me know. Thank you.

• Cannot print. Reference Dell 944 communication usb port is not available. error check your firewall settings to ensure the printer communication is not blocked.

  Original title: unable to print. Reference Dell 944 communication usb port is not available.

  Message says 'check your firewall settings to ensure the printer communication is not blocked. Printer has worked faithfully until the problems started with the XP Home operating system. To cut a long story short ram upgraded to 2 GB, all unnecessary programs identified and technician Microsoft contacted to solve problems.  I was informed of problems caused by 3rd software party conflicts. Kaspersky was apparently the culpit. Dell Inspiron 32 now much faster but the printer will not work little matter what I do. I tried to reload with drivers & utility CD, drivers uninstalled & reinstalled on the site of all nothing is? Can someone help?

  DavidNicholsonXN,

  How to download and install drivers in the correct order

  also try to read...

  The owners of all-in-one printer Dell 944 thread (W7)

  Let the printer after Kaspersky

  Rick

• The printer "communication not available" error in Windows 7

  Printer Communication errors__
  My printer worked fine for the last 2 years - now get "communication not available" - reinstalling printer with manufacturing CD etc. - tried to download the latest drivers, might work once & then the next time I get the same error message. I tried printer on a laptop & works is fine so no problem with the printer itself or by cable. Any ideas?

  Hi petermoonwalker,

  At this point, I would say that you contact Dell support directly to see if there are other troubleshooting steps they can suggest/help you with:

  http://support.Dell.com/

  If you decide to get a new printer, please be sure that it is compatible Windows 7:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/

  Thanks and good luck!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• HP Photosmart D7460: print system failure "0Xc18a0106" (HP Photosmart D7460)

  < it="" is="" a="" photosmart="" printer,="" not="" inkjet,="" but="" i="" could="" not="" find="" a="" perfect="" board="">>

  Anyone know how to do a MASTER RESET on a HP Photosmart D7460?

  Please do not send me links that list the steps to follow for a different model. He probably wouldn't have the same buttons.

  I just spent $ 60 + ink cartridges, but it does not solve the problem.

  I tried to unplug the printer while on, unplug the USB cable, then reconnect everything put back again, nothing works.

  HP can't do this no more, and I was told to post here on the Forum.

  Thank you!!

  Jabzi, thank you very much for your quick response.

  I need aplogize because I incorrectly titled as 'Print System Failure ' message instead of the correct "ink " system failure

  Here are the steps that erased my error and rendering my D7460 work also.

  The error is displayed on the screen, do the following:

  (1) press on & press and hold simultaneously the buttons print Photos and red eye removal, and then release both buttons.

  (the display should say "Enter spécial key combo")

  (2) press on & release the following buttons in sequence:

  -Red eye removal

  -Print Photo

  -Red eye removal

  (the display should now show a key code (do not act; you won't need - mine was PRXXFN0723AR).)

  (3) tap (on screen) the as many times as necessary to get the message across, right arrow icon

  "Menu of the System Configuration.

  (4) press on & release the OK button.

  On the title banner, you should see the letters "FACTOR" and the "hardware failure status" is displayed.

  (5) press on & release the OK button.

  Now it should display the message "disabled hardware failure status. Press Cancel to continue.

  (6) press on & release the Cancel button as many times as necessary to get one of these two messages:

  'Welcome to Photosmart Express' or 'Ink system failure' (with the error code 00XX0000)

  (7) turn off the printer using the power button.

  (8) unplug the power cord at the same time, the rear of the printer and the wall outlet.

  (9) wait 30 seconds (really, wait too long)

  Chart 10) power cord in the wall FIRST, and then at the back of the printer.

  (11) turn on printer using the power button / stop.

  NOTE: If the screen displays the message "printer preparation occurring", DO NOT interrupt it.

  You can tap on tools (key) and clean the cartridges, align printer or whatever it is you want to do.

  I hope this is the right solution for all who have this error!

• "A communication failure has occurred" when you transfer the file in Simulator

  I'm under Blackberry MDS Services 4.1.2 and using device Blackberry 9530 Simulator Simulator.  v4.7.0.75

  -Only the Blackberry browser is an option on this Simulator.

  -The Web page is a form that has an input file browse that selects an image file on the Simulator.  The form sends, but after 20-30 seconds, it seems to start timing and finally returns the error message below.

  -The same Web page works on a real device of Blackberry 9530 Storm without error.

  Error:

  A communication failure occurred with the chosen Mobile Data Service. The server may be busy, please try again later.  If the problem persists, contact your administrator.

  http://www.w3.org/1999/xhtml">
  
  
    
    
  
  
  
  
    
    
  
  
  
  
  Upload
  
  
  * Required field.
  
  
  
  smith, john
  
  
  1111 JAMES DR, New York, NY, 44444
  
  
  9234HH111111 (Property)
  
  
  Effective 02/14/2009
  
  
  
    
  
  
  
  
  File *
  
  
    
  
  
  
  
  Type *
  
  
  
    
  PHOTOGRAPH
    
    
  CLUE REPORT
    
    
  OYSC BUNDLE
    
    
  NY VEH INSPEC
    
    
  AGT FILES
    
  
  
  
  
  
  Desc
  
  
  
  
  
  
  
   
  
  
    
  
  
  
  
  
  
  
  
  ©2009 Insurance Company. All rights reserved.
  
  
  
  

  Support or ideas are appreciated.  Thanks in advance.

  Blueinc good tip.  I noticed that you were using the MDS of the JDE 4.7.0:

  C:\Program search in Motion\BlackBerry JDE 4.7.0\MDS

  I had been using the MDS for the stand-alone package of RIM:

  C:\Program 4.1.2\MDS search Motion\BlackBerry Email and MDS Services Simulator

  As soon as I tried the JDE 4.7.0 MDS, it worked without making any changes of rimpublic.property!

  So it seems that the bug is with 'BlackBerry email and MDS Services 4.1.2 simulators' MDS.  Thanks for pointing me the finger inadvertently in the right direction!

  Would be nice if RIM could fix the own MDS.

• Critical update to correct a PC Printer Communication issue

  FYI, HP has released a critical update to correct a PC Printer Communication issue a certain printers. So far, he is named for Photosmart C4400, C4500, C5500 and C6300. A specific connection type has not been specified, then it may be for the two USB and network printers. Download it from the link below.

  Exit the: 2009-01-25
  Version: 1.0
  Compatibility: Microsoft Windows XP, Microsoft Windows Vista, Microsoft Windows Vista Business (64-bit), Microsoft Windows Vista Ultimate (64-bit), Microsoft Windows Vista (64-bit), Microsoft Windows Vista Ultimate (32-bit), Microsoft Windows Vista Home Premium (64-bit), Microsoft Windows Vista Home Basic (64-bit), Microsoft Windows Vista Business (32-bit), Microsoft Windows Vista Business (32-bit), Microsoft Windows Vista Enterprise (64-bit) , Microsoft Windows Vista Home Basic (32-bit), Microsoft Windows Vista Home Premium (32-bit), Microsoft Windows XP 64 - Bit Edition

  Requirements: must have an existing installation of the device for which this update is meant. This update cannot be used for installation of the original equipment.

  Description: This update fixes a problem that may cause the computer lose connection with your printer, which may result in incomplete print jobs and loss of status messaging printer.

  Improvements: This update fixes a problem that may cause the computer lose connection with your printer, which may result in incomplete print jobs and loss of status messaging printer.

  CLICK HERE

  Hello

  Just thought that I would let you know that it worked for my C-4480.

  I got it for a few months and the power button wouldn't do her off and when short paper, he did nothing, and nothing worked except pulling on the power cord.

  Now for the first time, the window with the out of paper message and showed the message ok to hit the button and continue.

  I can also turn it off using the power button.

  So, it does not.

  Thank you

  Vittles

• Active due to Communication failure to the Audio System of the TV speakers

  Hi, I own a Sony LED W804a and also home theater BDV E880. I connected two receivers, my Apple TV and home theater HDMI ports to TV... Everything worked fine, but all of a sudden my TV screen started showing the following message 'Active due to the failure of Communication of the TV speakers Audio System'. After this message, audio is played through the TV speakers. Please note that during startup, television displays the message as 'Active Audio System', but later displays the previous message stated, and the audio comes through the TV speakers. Please help how to solve this problem. I made sure that the settings are made so that the audio output, I chose Audio System NOT the TV speakers. Also when I try to Bravia Sync between these two devices, the TV seems that certain signals to detect devices connected, but then it says no devices listed. TV and home theater, I kept on the Bravia sync options.
  Help, please...

  Could be as simple as a bad cable... what type of audio system?

• Communication failure USRP 2952R after loading image

  Background

  I recently started working with the NOR-2952R (X 310) and I'm trying to contact her on the 1 GB NETWORK card on a Linux server.  I am very familiar with the USRP N-210 and I'm looking to use it in a similar way.

  Problem

  My host uses UHD 003.007.001 so when I first performed a uhd_usrp_probe, I got the standard incompatibility message shown below, so I reimagee with the X 310 bit file comes from uhd_images_downloader.  The little-used file was usrp_x310_fpga_HGS.bit.

  Error: RuntimeError: number of firmware compatibility 0x3 WAITED, but had 0x4.0

  After loading the new image, I received x 300 errors of communication/fw as follows:

  [user@host ~] $ / usr/bin/uhd_usrp_probe - addr = 192.168.10.2 args
  
  Linux; GNU C++ version 4.4.7 20120313 (Red Hat 4.4.7 - 4); Boost_104100; UHD_003.007.001 - 0-unknown
  
  UHD error:
  
      x 300 failure communication fw #1
  
      EnvironmentError: IOError: x 300 poke32 fw - answer has expired
  UHD error:
  
      x 300 failure communication fw #1
  
      EnvironmentError: IOError: x 300 peek32 fw - answer has expired

  After a repair this problem for a few hours, I think I have bricked my device and I train using the JTAG interface to reimage the appliance.

  Question

  What is the right image to load for the UHD 003.007.001 driver and how to fix the failures of communication?  My server using a Broadcom NIC and I saw another post, suggesting that users had issues with Realtek NIC.

  Thank you.

  As a follow-up, my camera was indeed bricks by a corrupt charge.  I initially loaded (and subsequently recovered) my camera with the command below.

  [user@host ~] $ sudo/usr/bin/usrp_x3xx_fpga_burner - addr 192.168.10.2 - fpga-path /usr/share/uhd/images/usrp_x310_fpga_HGS.bit

  I was able to retrieve my device via JTAG with the same bit file and persisted in my image with the same command above.

  Go Hoos.

• Error message when printing - Communication not available, cannot communicate with the computer

  Original title: for some reason, my computer and printer communicate is no longer... I spent every day toubleshooting... always get this box: Communication not available, cannot communicate with the computer

  I have a Dell Inspiron E1505 laptop and Dell AIO 924 printer if that helps! all cables are correctly connected, unplugged, replugged, shut down rebooted, uninstalled / printer driver, always even reinstalled!

  uuggghhhhh!

  flustered2,

  You recently reinstall the operating system? If so, have you installed the drivers in the order?
  How to download and install drivers in the correct order

  First run delete print jobs to remove all print jobs stuck in the queue.

  Unplug the printer.

  Download and run the patch (cleaning printer utility) until it prompts you to restart your computer.

  Restart your computer.

  Now you can install the printer using the Dell Printer 924 disc.

  Link to the patch/drivers(if needed) is to...

  Dell 924 Photo-All - In - One Printer owners thread (W7)

  Don't forget the programs anti-virus and firewall will block communications.

  Also try this tweak...

  Go into Device Manager (right click on my computer, left click Properties, material of the left click, left click Device Manager)

  Go to the section USB controller, and then click the plus sign +.

  Go to each USB hub root and right-click on it, on the left, click Properties, on the left, click power management. Uncheck the allow the computer to turn off this device to save power.

  Restart your computer.

  Rick

• No Dell AIO 948 printer with the printer communication

  Original title: what is the problem with my printer?

  My computer does not communicate with my printer.  The printer itself seems to work fine, but when I try to print from a program soething, I get a popup saying that there is no communication with the printer.  I am running Vista for a Dell Inspiron 530 and a Dell AIO 948 printer.

  Hi TomBolich,

  1. When did you start to question?

  2. you remember to make changes to the computer before this problem?

  Step 1:

  You can try to run the printer Troubleshooter and check.

  For more information, see the links:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Step 2:

  You can see the DEll Web site and try to download the latest printer driver and check.

  Drivers & downloads for Printer 948 (Photo all-in-one)

  Hope this information is useful.

• Printer indicates failure with an error ink system: Oxc18a0001

  I was out of ink cartridge and installed get instant failure with the error ink system: Oxc18a0001

  What model of printer you have?

• the printer communication

  I have a dell v505 printer (Wireless) and a computer Studio 17 laptop. The printer print is no longer and the error says communication is not available. I tried to unplug, to reinstall. Resettlement show it worked, the wireless connection showed that it worked, but I still get the same message. No printing. Any ideas?

  Thank you for your help.

  My McAfee set up was a bit different than the one you showed above. While I was unable to follow your directions, I contacted McAfee and allowed a repair on the remote control.