printer Pixma MG8150 does not
I installed a canon pixma MG8150 on a print server in a domain. I can access his page web config and get a ping reply but when I install the printer on a computer and send a command to print (still a test page), the print monitor rises Sané "printer does not. Why?
Hi mick_s70,
Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet forums.
http://social.technet.Microsoft.com/forums/en-us/winserverprint/threads
Tags: Windows
Similar Questions
-
Equium M40X: Cannot print - not done. Print Spooler service does not
My notebook Equium M40X has suddenly decided to stop from allowing me to print, gives me the message "operation was not completed. "print spooler service does not. I get this message even when you try to install the original installed printer drivers.
To resolve this problem, I went to the services.msc to attempt to start the print spooler, but the command is not here present and seems to be missing. I also tried to launch it by clicking Start and then run and typing "net start spooler", but even once, it does not. Can anyone help with this?
My laptop is an Equium M40X and the operating system is Windows XP Service Pack 2.
Hello
This error occurs because the spooler service has not been started or has stopped working.
It seems that this error is known to Microsoft and they decided to public an article in the knowledge base that could help solve this problem.http://support.Microsoft.com/kb/314876
As you say that the spooler service must be restarted.
To start the spooler service, follow these steps:
1. click on start and then click Control Panel.
2. double-click Administrative Tools and then click Services.
3. double-click on the Printer Spooler service and then change the startup type to automatic. This option sets the spooler service starts automatically when you restart the computer.
4. If you want to start the spooler service immediately, click the Start button under the Service status fieldIf you will not be able to restart the spooler service, you can try to restore the Windows operating system to the point initially by using the Windows System Restore tool.
-
WiFi link for printer EPSON-750 does not work
WiFi link for printer EPSON-750 does not work. In spite of reset the WiFi on the printer and reset the EPSON 750 as default printer on the IMac, the connection between the iMac and the printer does not work
Have you also tried to restart the router?
-
Photosmart Premium Fax c309 Series all in one printer Wireless Radio does not work
Some time before, the radio on my Photosmart Premium Fax c309 series wireless all in one printer stops working.
With a wireless network test:
Wireless is on (but light indication only is not lit)
wireless network card has failed
"The wireless radio does not work. Contact Hp support.
Any help would be greatly appreciated!
Thank you
Smithb2
Hi smithb2, welcome to the forums there.
I saw your post on the wireless radio does not not on your model Photosmart C309.
I did some research and came across this post in the community that seemed to have worked for others with the same problem.
Re: Without the printer wireless radio does not
I hope that helps!
If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.
Have a great Thursday
-
Print Spooler service does not
All of a sudden my computer says print spooler service does not. There are no printer. What in the world happened and how to I fix that?
Hi Mark,
Try to reset the spooler Services service, click Start-> Run Type & -> services.msc-> ok.
Locate the printer spooler on the right side-> right click and select Restart-> now Double click on Print spooler-> select automatic for startup type.
If give you the error, try to replace spoolsv.exe is located in C:\windows\system32 in C:\WINDOWS\ServicePackFiles\i386.
I hope this helps.
-
Print Spool system does not
BurrWalnut:
Follow-up of your suggestion and files deleted.
In a ditch last effort, I went back to Mr. Fixit and found a solution to not be able to load the printer.
Mr. Fixit has helped do its thing. Drivers charged for the HPLaserJet1020. It's working now.
Thanks for the lead that has cleared the decks, so reloading might work.
Best regards
-
on a printer shared and I get printer spooler properties does not
When I try to print from my other pc it say memory and Printer Spooler context does not and when I go to control panal printer and try to right click on anything it says the spooler does not and not connected
You can print from the computer to which the printer is physically connected (assuming that the printer is physically connected to one of your computers)?
What version of Windows, including the service pack is on the computer to which the printer is physically connected? (Right click on desktop and select Properties, if you do not know).
What version of Windows, including the service pack is on the computer that is giving you problems?
How did the computer which gives you problems connected to your local network?
Can you access any file on the right computer of the bad computer?
What is the brand and model of the printer?
The following applies to the computer that is giving you problems:
Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver. However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:
AntiMailware MalwareBytes
SUPERAntiSpywareDo not operate the two scans simultaneously. Each will take a long time, so start it and then go do something else for a while.
IMPORTANT: If either of the analysis above turns up malicious software (other than tracking cookies), both from the scans will work on all the other computers connected to your local network.
Cleaning of printers
NOTE: If after completing step has the print spooler is not always running after you launched the command "net start spooler", you will not be able to follow all the steps in "First Article". Instead, go to the other link and download and get and use the utility 'cleanspl' such as described here.
A. Clean on print jobs pending
- Open a command prompt window (start > run > cmd > OK)
- Type the following in the black command prompt window, and then press ENTER after each line
net stop spooler
del/q '% windir%\system32\spool\PRINTERS\*.* '.
net start spooler
outputB. clean the old printer drivers and install the latest drivers by using the directions in One Article. If you have (or had) a Lexmark printer, follow the instructions on the following site before installing the new drivers, as explained in its first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm
-
Printer error print spooler service does not? Why not
I have a problem with my printer . I went to use this boy was that cannot use a misstake... go Control Panel /printer .and see I have no printer and you can't print at all. I tried to instwith a CDerror the Print Spooler service does not... I need help big time what should I do?
HELP Florida Irving
Hello
Try the steps below and check if they help to resolve the issue.
Method 1:
Check the link below and try the troubleshooting steps provided to solve the problems with the printer in Windows.
Printer in Windows problems
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
Method 2:
If the steps in the link above do not help, try to manually restart the Printer Spooler service.
You must be logged on as administrator to perform these steps.
(a) open administrative tools by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.
(b) double click Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
(c) right click on the print spooler service, and then click Properties.
(d) on the general tab, next to startup type, make sure that automatic is selected.
(e) if the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation
-
printing problem "the print spooler service does not work.
Original title: printing problem
I want to print, but a warning said "the print spooler service does not work. What is c? or what can I do?
Hello
I suggest to follow each steps of troubleshooting provided in the link below and also suggest to run the Fixit tool in step 2 and verify if it helps solve the issue
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
-
I lost the connection to the printer or I can add a printer because it - Printer Spooler service does not. Can you have a suggestion or an opinion. Thganks much. Michael
Right click on 'My computer' / select 'manage '.
Under "Services and Applications", select 'Services '.
Check to see if the "Print spooler" service is "started" and "Startup Type" is set to "auto".
Also check if the 'RPC Remote Procedure Call () service is also "started" and "Startup Type" is set' auto.
J W Stuart: http://www.pagestart.com
-
Failed to load printer - clicking Add indicates a Printer Spooler Service does not.
Upgrade Windows XP to SP3 last night. Now all in printers and faxes has disappeared. Click on add a printer indicates the Spooler Service does not. Went in and forced a start; Add the said printer still does not.
Deleted old printer drivers (Lexmark). Downloaded updated. Execution of Lexmark is set up; said the spooler does not (yet), tries to start. Then, the installation fails saying "No. valid Ports for the driver.
Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver. However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:
AntiMailware MalwareBytes
SUPERAntiSpywareDo not operate the two scans simultaneously. Each will take a long time, so start it and then go do something else for a while.
I think that your problem is related to the way that Lexmark install printers, as explained in this excerpt from the article linked in step B below (step numbers refer to article in full):
If you have a Lexmark printer, these additional steps may be necessary (thanks to Robert Orleth [MSFT] to provide this information). Sometimes, the Lexmark printer installation process installs a service that makes dependent Print Spooler service itself. If there is a problem with service Lexmark or a Lexmark printer driver (or you have removed using the procedure above), Print Spooler service does not start (see also http://support.microsoft.com/default.aspx?scid=kb;en-us;324757). The steps below make Print Spooler service only on service (RPCSS) remote procedure (RPC) call, which is normal. Print Spooler service dependencies are stored in the registry at
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Spooler\DependOnService
The sc config step 16 command resets the value for this entry.
Open a command prompt window
the control key
sc config spooler depend = RPCSS
(Note the space after the = not before)Restart print spooler (see steps 8 and 9 above)
Cleaning of printers
NOTE: If after completing step has the print spooler is not always running after you launched the command "net start spooler", you will not be able to follow all the steps in "First Article". Instead, go to the other link and download and get and use the utility 'cleanspl' such as described here.
A. Clean on print jobs pending
- Open a command prompt window (start > run > cmd > OK)
- Type the following in the black command prompt window, and then press ENTER after each line
net stop spooler
del/q '% windir%\system32\spool\PRINTERS\*.* '.
net start spooler
outputB. clean the old printer drivers and install the latest drivers by using the directions in One Article. If you have (or had) a Lexmark printer, follow the instructions on the following site before installing the new drivers, as explained in its first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm
-
Help with the Printer Spooler service does not work error
How can I fix printer service spooler does not work error? My two printers won't work now, and re - install the printing software produces error messages. Tried to use microsoft fix - it for printers without result.
Thank you.
Hi elvenlord21,
See the article below which has some useful suggestions to fix the print spooler error.
You cannot add a printer and you receive Printer Spooler error messages in Windows XP
http://support.Microsoft.com/kb/324757See also:
Error message when you use the Add Printer Wizard: "Operation could not be completed.
http://support.Microsoft.com/kb/314876Kind regards
Shinmila H - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Printer Spooler service does not
No apparent reason, I can print is no longer. In Panel, printers and fax machines, no printer is listed despite the fact that there were at least two. If I try to add a printer, I get the message Printer Spooler service does not. I was on the Microsoft site and loaded a convenience store who confirmed that the Printer Spooler service did not work but cannot fix it. Not very useful at all. Can anyone help. I saw that a lot of old messages about this problem so it is not unique, but I'm really really stuck.
You can start the print spooler by using different techniques, which one is suggested by Saurabh Joshi.
Unfortunately, restart the print spooler generally fails to resolve the problem that caused the print spooler to stop in the first place.
Apart from malware (and you'd be well advised to scan your system to update MalwareBytes Anti-Malware and SUPERAntiSpyware), are two likely reasons that your print spooler stops printer driver has corrupted and (b) corrupt print job stuck in the print queue.
Start by removing the print queue. With the print spooler stopped, go to C:\Windows\system32\spool\PRINTERS and delete the contents of the folder. Do not delete the folder ...\PRINTERS himself.
Then, clean and reinstall the drivers for your printer. See the instructions at http://www.coribright.com/windows/Article_One.htm
If you have a Lexmark printer, see this article for special instructions: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm -
I have Windows XP - Pro. The "Print Scr" button does not work and niether is the combination of keys 'Alt + P'. My keyboard is not an "F LOCK" / key "F Lock feature" because it has a "Num Lock" key There's no other keys on my key Board that suggest even a '___Lock' of any kind. If not, how can I get this feature. Oh... and one more thing, Microsoft/people sending responses to others, here, to "Social responses" can you try to be a little more specific with what you're talking about? As your knowledge is greatly appreciated by many, many of us are unfamilliar with computers and have NO idea what you're referring to. When Microsoft did not find something or is just lazy to do so, he advises people to "ask the administrator of the computer. I'm the "computer administrator", but I'm inexperienced! How does it work? Thank you all.
On Saturday, August 14, 2010 12:57:22 + 0000, Firstname, Lastname2 wrote:
I have Windows XP - Pro. The "Print Scr" button does not work
In the days of DOS, the print screen button to print the screen. But
in all versions of Windows, it works differently and the name of
the key is now an anachronism. The key is not to print the screen.
PrtScrn captures the entire screen and Alt-PrtScrn captures activate
window.Either a capture of the image in the Windows Clipboard. Once it is in
the Clipboard, you can paste (Ctrl + V) into any application that
supports graphics (Windows Paint, other graphics software, even your)
favorite text processing). You can change or add to the image you
like, then print it out.This ability to manipulate the image in a program before printing
is an improvement on the original method of printing the whole back.
But if you like that old return facility, there are several
freeware/shareware programs from third parties which can do, such as
PrintKey2000 to
http://www.Sharewarejunkies.com/00zwd2/printkey2000.htmKen Blake
-
All of a sudden, when I try to print to one of a number of printers, nothing happens. The printersw are all connected properly. I tried to reload the drivers, but the weem bt problem both in the "print command" ideas?
Go to start > administrative tools > Services > start (right click) as administrator > Windows print spooler service > restart
If the print spooler service restarts and then try to print
IF restarting the service spooler to print, but you are not able to print immediately, then try to reinstall your printers again
IF the print spooler service does not stop and throws an error message, then enter "cmd" in the run box and type "sfc/scannow" and the system will give you error messages additional that you can use to troubleshoot your print spooler service error.
Maybe you are looking for
-
Access by Mac for windows 2003
Hello I have an old WHS with windows 2003 and I now have the need to access my mac share. The Mac share is activate and works perfectly in my windows 7 machine and windows 10. When I connect on windows 2003 and try to access the share \\ip\Documents
-
Anyone know how loud the ringer is? I need a very strong ringtone. I'm all in with everything else.
-
All-in-one OfficeJet J5780 printer does not print manual duplex
Hi all first of all, sorry for my bad English; I'm Italian and the Italian Forum, I can't find anything that can help with my problem. I use my old (and wise... ;-)) OfficeJet J5780 on my laptop with MS Windows 7 SP1 64 bit for years without any prob
-
I don't know how to recover my volume icon - can anyone help? Thank you!
-
Ran/scannow SF and in the report, it said my desktop.ini is corrupt and could not be repaired. The best answer that I needed, I get a clean desktop.ini file from another computer, but I can't. Any ideas how to solve this problem or where the web ca