Printhead HP Photosmart 5510e does not pass to the mounting position

Similar Questions

• HP Photosmart D110a does not connect after the software update of the router

  I'll try a restatement of my first message:

  Two days ago I had problems with my Internet service provider modem.  This problem has been solved, but leads to a second problem still does not connect to the internet.  Then with the help of technical support D-Link, an update of the software has been downloaded to my wireless router and installed and now I can connect to the internet.

  But today, I had to use my printer/scanner for 2 1/2 year, HP Photosmart D110a, it is not connected through the above wireless router.  (The blue light on the printer blinks just).  Tech support says I'm out of warranty, so I hope someone can help me here on this forum.

  Thank you!

  Glad you got it to work, please mark it as Solution accepted so that others can search and find the answer too.

• YouTube does not pass to the hd mode full screen

  Hello
  I have YouTube value "always switch in HD when you switch to full-screen (if available)", but when you use the latest version of Firefox (4.0.1), this does not happen.
  I tried it in Chrome, and he works there, so it may be a problem with Firefox. Any suggsions?

  Clear the cache and cookies (for the site), and then try again.

• Prompt dashboard value does not pass in the report

  Hello
  
  I use OBIEE 10 g. The problem is in Oracle BI answers
  
  I have a guest orders and its report. In the prompt, in one of the column, I use sql result. The sql query is a query of sup of co related where I used the 2 tables. employee_data and employee_region. The reason to use the subquery is that there is no column data_center in employee_data table. He has records for all data_center e.g. USA, UK, IND, AUSTRALIA etc. so I used the query sub with condition that gives the result on a center of particular data (here's of the U.S.) and the output of the query of this sub is entered for the main request. And the guests works very well and gives the correct result
  
  The sql query used for the column in the prompt (in Oracle BI answers) as
  

  SELECT EMPLOYEE_DATA.ENAME FROM EMPLOYEE WHERE EMPLOYEE_DATA.ENAME IN (SELECT EMPLOYEE_REGION.ENAME FROM EMPLOYEE WHERE EMPLOYEE_REGION.DATA_CENTER = 'USA')

  In the report, there are now 2 coulmns. -EMPLOYEE_DATA. ENAME and EMPLOYEE_REGION. DATA_CENTER
  I used the main column EMPLOYEE_DATA. ENAME to filter as a "guest."
  
  The problem is that the value from the prompt is failed at the prompt of the report, what I found. Because, rather than show the result for 'USA' data_center, it also shows the other data_center (UK, IND, AUSTRALIA) data.
  
  How to filter the condition I should use for EMPLOYEE_DATA. ENAME column in the report so that the prompt value will change to the report correctly?
  
  Thank you
  
  Published by: Kuldip on 21 February 2013 06:17

  Hi Kuldip,

  If a direct column is not used in the prompt then it would not strain the direct relationship with column with guest. In your case try using a variable presentation. Define a variable presentation in the command prompt and use the presentation variable to filter the report.

  Let me know if it worked.

  Kind regards
  Jay

• Service Web REST-output parameter does not work in the Manager POSITION

  I created a RESTful Web Service in Oracle Apex, using a POST method as a 'Manager'   I have installation 11 input parameters which all work fine, this is my setting an output that does not return successfully.

  Here are details on the output parameter

  Name: returns

  Name of the bind Variable: : return

  Access method: OUTPUT

  Source type: response

  Parameter type: String

  The actual source is a call to a pl/sql package that returns a value that I set: Returns equal to (for example: Returns: = v_result).   I tried this with header Type of Source and still the same result, "no exit".

  I see APEX calls wwv_flow_api.create_restful_param to generate the (import) settings, is there documentation on this procedure?

  How can I get this output parameter to return something to the answer?

  The application accepts a load of Json.

  Any help greatly appreciated

  Thank you

  James

  Solved my problem: feedback does not need to go back

  Does not work

  Name: returns

  Name of the bind Variable: : return

  Access method: OUTPUT

  Source type: response

  Parameter type: String

  Works

  Name: returns

  Name of the bind Variable: returns

  Access method: OUTPUT

  Source type: response

  Parameter type: String

• Pop-up window does not show in the right position in the sensitive design (was: place cursor object)

  Hello world

  I create a demonstration of the software using screenshots and leading edge.  There are pop-up windows in this product when the user places the mouse over a row of data and a popup appears at the mouse position with more information on these data.  I used

  SYM. $("myObject") .css ({"location": "absolute", "top":e.pageY, "left":e.pageX});})

  and it works fine until I set stage for 'sensitive' or I scroll to the bottom of the page to access the data rows.  When this happens, the popup appears in the distance of the mouse.

  I'm not a coder strong, but anyone know how I can get on board an animation to recognize the true position of the mouse on the screen and then specify the popup to appear there?

  Any advice would be appreciated.

  Thank you

  Randy

  Try the code in this example - Dropbox - mouseclick.zip. The phase shift is not supported in the code, let me know if that is necessary for your use case.

  DIA-

• DataSet attributes does not pass on the form of courses

  Hello guys,.
  I created a group of data for the resource RISORSADATASET. The request went well, collecting all the attributes, but in the end, these attributes were sent not the process shape.
  
  RISORSADATASET is quite simple, consisting of a login and passowrd parameter.
  
  The shape of RISORSADATASET process is:
  
  The field name label
  UD_RISDATAS_PASSWORD PASSWORD
  LOGIN UD_RISDATAS_LOGIN
  
  I had a doubt about the value of the attr-ref element, so I traced it both, label field and the name of process form. My dataset is as follows:
  
  
  < request-set of data xmlns = "http://www.oracle.com/schema/oim/request."
  xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance".
  xsi: schemaLocation = "http://www.oracle.com/schema/oim/request."
  name = entity "ProvisionResourceRISORSADATASET_GTC" = "RISORSADATASET_GTC."
  operation 'DISPOSITION' = >
  
  < name AttributeReference = "Password" attr-ref = "UD_RISDATAS_PASSWORD".
  available in bulk = "false".
  Type = "String".
  length = "20".
  Widget = "text".
  required = "true".
  hidden = "true" / >
  
  < name AttributeReference = "Login" attr-ref = "LOGIN".
  available in bulk = 'true '.
  Type = "String".
  length = "20".
  Widget = "text".
  required = "true" / >
  
  < attribute name = "OTT".
  available in bulk = "false".
  Type = "String".
  length = "20".
  Widget = "text".
  required = "true".
  approver only = "true" / >
  
  < attribute name = "SoloUtente".
  available in bulk = "false".
  Type = "String".
  length = "20".
  Widget = "text".
  Hidden = "true" / >
  
  < / request-set of data >
  
  
  This is my first set of data, so any help would be most welcome :-).
  
  Best regards
  Carole

  Yes

  I didn't know if I had to use the field label

  Go ahead and use LABELS

  Click AutoSave on Process Definition

  I will wait your answer :-)

  Don't forget to use PurgeCache.sh after re-import this dataset.

• Photosmart 6520 does not print to the main tray

  I'm trying to print a PDF file which is the letter format.  The printer says its printing on the main tray preference, yet the printer continues to try to print by using the photo tray.  How can I get it to print on the main tray?

  Hey @flowerchild22,

  Thanks for getting back to me on that.

  It is this problem with the main tray only with the 1 PDF A4 format you are trying to print. In other words, all other programs print correctly?

  What program you print PDFs through?

  If you use Adobe, try to go to:

  1. Click on file
  2. Click on print
  3. Click on advanced
  4. Choose 'print picture '.

  Please let me know if it's just a single PDF file or if it is the case with other PDF files and other programs. Good luck!

• I have a HPw2207 monitor that does not work in the vertical position operating under Windows 7 64-bit.

  I use a HP Pavilion p6-2033w PC. It was fine on XP. Any suggestions?

  Hello

  I had no problem downloading the driver for monitor for my PC.  You should be able to download and save the driver from the monitor on your PC.  Then try the installation again.

  Turn off your PC and try a reset monitor. Unplug the power cord from the monitor and hold the power button of the monitor for 30 to 60 seconds. Plug the monitor back in and it lights up.

  After you download on the Windows desktop, right of the mouse on the desktop and select the resolution.  You should be able to select the desired screen orientation.

• XPS 9000 froze and restart does not start - get the cursor flashing, top left of the screen

  System was working normally and after some time froze - no mouse movement, clock does not move, etc.

  Did a stop down with the power button (hold down 10 sec +) to stop.

  On switching on, does not pass through the boot sequence.  F2 does nothing and the only sigh of 'life' is a blinking cursor, upper left corner of the screen.  Tried to close - turn several times with the same result.

  I suspect a motherboard problem because there is no start. Don't know any other tricks to try to resuscitate the box.

  Does anyone have experience/solution for this type of problem?

  WGR,

  As there is no "beeps", I guess as a failed motherboard.

  Try the following, if you are comfortable working around computers:

  Note: The only 100% POWER supply test method, is to install a known working power.
  
  Unplug the power cord, hold the power button in for about 15-20 seconds, open the case, disconnect the power connector 24-pin motherboard and jumping the Green wire to one of the black wires, plug in the power cord and the power of the system, if food and case fans and disk hard drive performance then the power supply should be good.

  Note: Do not remove the wires from the plug, use a small piece of wire or a paper clip as a rider.

  Excerpt from power supply, again, unplug the power cord, hold the power button again for 15/20 seconds to discharge residual power, reconnect the connector 24 pin to the motherboard.
  Remove all the computer PCI cards, remove the video card [as appropriate], disconnect all devices, except the monitor, mouse and keyboard and unplug cable power & data of all readers.
     
  Reconnect the power cord and power the system on, see if you get something different from the LED on the power button, or any 'beeps '.

  No difference, remove the system memory and try again.

  Still shows no signs of life while looking at a motherboard replacement & maybe a processor.

  Note: The good news is, processors lack rarely, being the only method I know to check a processor, install a compatible work PC, or use a known job processing.

  Unfortunately the Dell OEM XPS 9000 renovated/new motherboards are not cheap.
       
  Bev.

• Photosmart 6515 does not print black ink after replaced the cartridge

  I am very frustrated! I can't get my Photosmart 6515 print black ink.

  Our school sends the documents by e-mail now that we have to print at home. Ideal for them, but not for me. They are usually in PDF format, so I do not have the ability to edit and change the blue color to print, either.

  I only use HP cartridges on this printer. I know it's more than a year, in order to call phone support will do no good.

  I replaced both cartridges and now it shows black ink completely full, but when I print the printer status report, black is not displayed. Black does not appear on the tool pages, either.

  I tried the command "clean printhead" several times. I unplugged and waited. I took all the cartridges. Connections look clean.

  What should I do to perform a partial reset or full?

  Hi Photokool,

  I understand that this has been a frustrating experience for you, and I want to help him.

  I will send you a private message, please check the little envelope on the upper right of the forums page to check your Inbox of Forums.

  

• Photosmart 6510 does not print in black

  My photosmart 6510 does not print in black. I presume that it was the cartridge but I replaced the cartridge and it still does not print. I cleaned the print heads and the cartridge ink levels are full.

  The printhead, cleaning of the screen failed touchscreen printer running.  But when I sat down at my computer and used the program utility printing, he did.  I ran an initial print head cleaning my computer and then clicking the button indicating that the print heads were NOT clean.  He then ran a deep cleansing process.  Then I lined up the printheads of the same print utility program.  Now it works!

• HP Photosmart C6380 does not scan or print photo with Windows 8

  Just bought HP M6/1125DX/15j with Windows 8. My current HP printer is a HP Photosmart C6380 All In One.  The printer does not work, but the photo and analysis part icons no longer appear which were on my front desk. I tried to download the entire program which said would update my printer, but after 6 tries to one hour each, at the end he just said my download has been cancelled. Is there a chance that my printer will be supported by Windows 8 and how do I do that if I can't download.  Or am I stuck buying a new printer? Thank you

  Hello

  The C6380 is supported in Windows 8 and has a Solution Full Download.  I would try using the Print Wizard to download and install the drivers.

  Try this link for the Print Wizard.

  Print the installation wizard

• I got an iphone 4 to a friend in the Canada. I want to use it here in the Philippines as a regular iPad reserved for wifi, how can I use it without sim card? It does not pass the activation page. Help please?

  I got an iphone 4 to a friend in the Canada. I want to use it here in the Philippines as a regular iPad reserved for wifi, how can I use it without sim card? It does not pass the activation page. Help please?

  You can activate it without a SIM card. If it is locked, it takes a SIM card by the carrier, for it is locked. The SIM card should not be linked to an active line of service, but it must be present to activate it.

• Photosmart B8550 does not print black

  Photosmart B8550 does not black print.

  With the new black cartridge the report 'Pure Prinhead', but not when you print the actual page?

  No problem! I like to try to help out!   If you get the print head and installed and still have a problem, feel free to post back.