PhotoSmart c309 will not see my network

Similar Questions

• Guest OS will not see the network

  I have a new ESXi 5 host running.  I can connect to the host with the vsphere client.  I created two geust, a Windows XP OS and a 2008 Server.  I can't get a DHCP address on one of them, when I put a static address, I cannot ping anything other than the host machine.  Can not ping gateway, DNS, etc...  Also, I don't do a ping guests from a workstation on the network.  Any help would be appreciated.  Please let me know if you need other information.

  Thank you

  Mike

  Welcome to the community,

  This is often seen with managed switches. Please ensure the security of ports (for example the office mode) is not enabled on the physical switch ports. According to the model of switch, you must configure switchport access mode and spanning tree portfast for ESXi uplink ports.

  If this is not enough, please provide details on the current configuration of the network (physical and virtual).

  André

• Why my Photosmart C8180 can not see my Virgin super hub, when he sees all the other distant routers?

  I'm on Mac OS x 10.7.2. I have a blank superhub. My Photosmart C8180 will not detect the hub using the wireless Assistant, but sees other networks in the region. I tried setting that allows a fixed IP address in the range of the router. Still nothing.

  Pilots etc have been updated for Lion ffollowing as instructions on the HP site but still no luck. Can anyone help?

  Diagnostic summary reports: -.

  Radio on: PASS

  The radio work: PASS

  Cable not connected: PASS

  Network name (SSID), found; IN CASE OF FAILURE

  The six remaining diagnostic report does NOT RUN

  Record of the summary reports: -.

  Network name: NOT APPLICABLE

  Hardware address (MAC): {identified but not included here}

  IP address: NOT APPLICABLE

  Configuration source: NOT APPLICABLE

  Communication mode: INFRASTRUCTURE

  Authentication type: NOT APPLICABLE

  Encryption: NOT APPLICABLE

  The blue light above 802.11 g on the right face is on.

  The printer works properly when connected by USB, but not with the radio.

  Kind regards

  Michael

  Security mode is set to [AES] WPA2-PSK and SSID Broadcast is checked.

  ID of 5 GHz Wireless band setting

  I tried to change to auto WPA, but it has no effect. Still does not see my router.

  Printer is set up for sharing in the Mac system preferences

  Just found my own solution.

  Changed Wireless 2.4 GHz band and has appeared.

  Thank you for taking the time to answer anyway. One to save for the future, if someone else reports similar problems with blank superhub.

  Kind regards

  Mike

• HP Photosmart 3210 will not install on Windows 7 Pro 64 bit.

  HP Photosmart 3210 will not install on a brand new desktop running Windows 7 Pro 64 bit.  I downloaded the latest software, and when I run it, the installation window disappears shortly after it starts.  No error message.  I ran into several related issues lately.  I can't install a ScanJet 5590 on a new laptop running Windows 7 Pro 32-bit.  Said it ends, but nothing is installed.   Could the fact that there are other HP printers installed on these computers (network printers) installed using driver only before attempting to install the software cause problems?  I spent hours trying to solve these.

  OK, much better progress!

  If the software is always installed, tell him you'll connect later.

  Go to devices and printers, look for the printer here, make sure you that no documents waiting to print and delete the printer if it is there.

  Then go into Device Manager and remove all photosmart series 3200 drivers you find, you may need to click displays hidden on the view menu.

  Thirdly, go back to the devices and printers. Select another printer, as the writer XPS comes with Windows. Along the top, with adding a device, add a printer, print server, you will see properties. What to choose and go to the tab drivers. If you have the HP drivers in there you do not, select them and choose delete and "delete the driver only."

  Now restart and go to your Start menu and your HP folder. You must have installed the software, just no device driver, select "add a device" or "printer setup and software." Installation should complete without problem.

  One last thing, you must temporarily turn off firewall and antivirus installation, in which case he mistakingly tries to block the attempt to install.

  Good impression!

• HP Photosmart d110a will not scan.

  HP Photosmart d110a will not scan.  The resettled drivers, checked, put off - tension, nothing works.  Using Windows 7.  Error message is ' try scan from computer or see the documentation.

  Hello smhbcd

  The current software and try to reinstall using the latest drivers from the website. The link below will take you to the page "Select your operating system". Do it and download the latest driver full features.

  Photosmart D110 software

• My Windows Vista computer does not see the network or printers that are connected to a computer using Windows XP

  before that norton was installed, it worked, but since Norton was installed AND DELETED, Vista will not see XP or its printers.

  I have checked the firewall and they took two computers, but still no luck.

  Hello

  Did you change your computer?

  This problem occurs if the (LLTD) link layer topology discovery Responder component is not installed on the Windows XP computer.

  Network card in Windows Vista makes network diagrams of connections between network devices that can be used to troubleshoot connectivity issues. Network map uses a discovery protocol called Link-Layer Topology LLTD (Discovery) that queries other devices on the network to determine how the network is organized.

  Windows Vista includes the software components that implement the LLTD protocol. For other devices on the network to display on the map, they must activate a discovery protocol that can meet the demands of mapping from the Windows Vista-based computer.

  I suggest you to install the update on windows XP.

  http://www.Microsoft.com/download/en/details.aspx?amp;amp;amp;displaylang=en&ID=5577

  This reference so

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

• Photosmart 6525: will not print in black

  My photosmart 6525 will not print in black ink.  Clean the printheads 6 times. Cartridge replaced twice. Any suggestions?

  Hello

  Welcome to the Forums of HP Support! I see that you are having problems printing in black. I want to help you solve this problem. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Try the following steps to see if it will solve the problem, HP Deskjet 6520, printers HP Photosmart 6520 - printer prints a blank Page or doesn't print in Blac...

  Here is a document to manually clean the contacts of the cartridge, "not compatible ink cartridge" or "specified ink cartridge needs to be replaced" views for HP Deskjet i...

  Do not take into account the title.

  Here is a document for the reset of the printer. Ignore the title, HP printers - solve the 'problem with printhead,' "The printer failed," 'Ink system failure', or ' 0 x. / c0 > »

  Please let me know the result and if there is anything else I can help you. Thank you.

  

• Satellite Pro P300-1AY does not see wireless networks

  I have a Satellite Pro P300-1AY and the unit does not see wireless networks.
  I replaced my card and it does not solve the issue.

  I set up another type of card and those who work well, it is only when I get an Intel 5100 (512AN_MMW) the unit does not see any network.

  I use win XP. Any idea?

  Hello

  You have the latest version of the BIOS?
  If this isn't the case, then you should first update the BIOS!

  The latest version of the BIOS is on the European driver Toshiba page and it can be modified running Windows OS.
  As far as I know, you must use 2.5 or later version BIOS.

  Check it!

• I have a pavilion p6130fpc and it will not see the drives.

  I have a pavilion p6130fpc that will not see the drives. I tried 3 different hard drives and change the cable and port twice. I have also reset the BIOS and pressed the power button for five seconds after you disconnect without success. Someone at - it any other ideas?

  Willman,

  Unfortunately you are not alone. HP has sold a lot of different models with the M2N78 - motherboard. The problem is that the manufacturer of the Board of Directors (not HP) set up a controller chip NVidia which tended to overheat. Once this chip goes, ur stuck. The SATA ports are controlled by this chip.

  http://h30434.www3.HP.com/T5/desktop-hardware/m8530f-desktop-PC-with-a-M2N78-la-mother-board-doesn-t-see-my/TD-p/181716

• iPhoto will not see all the pic. on the iPhone.

  After installing a new hard drive in the iMac, due to the failure of the original installed, I struggle with having on the iMac iPhoto to see pictures on my iPhone that are older than October 2014. Photos are visible on the iPhone, but iPhoto will not see them which allowed me to transfer and secure them on the iMac. The iPhone is connected to the iMac with a cable to the USB port. Thanks for supporting.

  iPhoto can only see the photos that are in the film.  The older photos have been synchronized to your iPhone using iTunes? Then you can download them in iPhoto. Sync photos from your computer to your device via iTunes - Apple Support iOS

  • You cannot re-import photos synced from your computer to your device to your computer. You can only import photos from your device, or record, in your device to your computer. If you need recover photos synced from your device, send photos of the unit yourself. Then download the photos from the emails on your computer.

  If the pictures are on the Filmstrip, but iPhoto does not always show them, try to upload them to launchinh Capture of Image. It is downloadable from your iPhone to a folder,

  Another reason for only a few photos in iPhoto could be iCloud photo library.  If iCloud photo library has been activated on your iPhone, you can only import those photos that have been uploaded to the iPhone, but not the photos in iCloud. If iCloud library is active, download from iCloud.

• Access Manager will not see this website need a supervisor password. This Page has been blocked by your approved Sites list.

  kb956196

  Access Manager will not see this site, supervisor password needs.  This page has been blocked by your approved sites list

  We have forgotten the password. is there a way to reset the password or to disable it without the password?

  Hello

  Download and run the http://www.nirsoft.net/utils/conadvpass.html program (if you are able to access the site)

  If not, perform this task:

  "If you have forgotten the password of Access Manager, you can remove it by accessing this folder in Regedit (don't forget to back up your registry first):

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\

  CurrentVersion\Policies\Ratings

  Select the key called icon in the right pane and press on delete. Close Regedit.

  Now, you can start Internet Explorer and goto tools, Internet Options... Select the content tab and click on disable. When asked a password, do not write, just click OK. This will disable access Manager, since nothing is more a password. You can enable it again as soon as invent you a more memorable password"

• Windows will not see my DVD/CD drive

  I have Windows Xp Professional SP3. Windows will not see my DVD +-RW which is internal drive, or my double-sided external DVD RW lightscribe. I tried the FixIt tool and the registry hack. They can work at the same time, but whenever I try to use the car, they both disappear again. Anyone have any new ideas?

  Hello

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  ·        What registry hack you speak and what patch did you use?

  Method 1:

  I suggest you try the steps mentioned in the articles below and let us know your progress.

  Drive CD - R or CD - RW Drive is not recognized as a recordable device

  http://support.Microsoft.com/kb/316529

  Advanced Troubleshooting for issues that occur when you are installing a new CD or DVD drive in Windows XP

  http://support.Microsoft.com/kb/314096

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Method 2:

  I suggest to update the firmware of the CD/DVD drive on the system and check if the problem persists.

  Method 3:

  In addition, run the fix that is present in the link mentioned below.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• WM 11 will not see the video of the WMV files but will MPG

  WM 11 will not see the video of the WMV files but will be mi/gal.  He plays the sound but not the image. No error displayed either, just this psychedelic carp.

  Hi Tammii,

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  Method 1

  This can happen due to the acceleration of video material for the game in the drive try reduce (or cut) great video acceleration by following these steps.

  (a) open settings display by clicking the Start button, clicking Control Panel, appearance and personalization, customization, and then clicking display settings.

  (b) click on Advanced settings, click the Troubleshooting tab, and then click change settings.

  (c) note that some video card drivers do not allow allows you to change the settings.

  (d) move the hardware acceleration slider to zero to reduce or turn off video hardware acceleration.

  Method 2

  This may also occur due to the missing codec required to run the video file.

  Codecs: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  Method 3

  If the previous step fails then try to update the drivers of graphics card on the computer by visiting the graphics card manufacturer's website, download and install the latest driver and check if it works.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to open a document illustraor silently, so that the user will not see it

  Hi all

  I work with Illustrator CS5 and you want to import a picture (files HAVE) documents Illustrator in another document. When I tried event file-> place work file converted to pdf object. Are there other ways to import the work as it is in another file.

  A work around is: to open files in Illustrator, copy content to the Clipboard, paste it into the desired document layer, close document.

  But I need to open these documents in silent mode so that the user will not see them. Is there a method to open the illustrator silently files?

  Please report a solution or any suggestions would be welcome.

  Thanks in advance.

  
  D.

  Ok. To open a document in your own format in silent mode, you register your file using AIFileFormatSuite::AddFileFormat format. Then in the GoFileFormat Manager, you treat the document, and then return an error code, e.g. kBadParameter. The document never appears and Illustrator shows no error, but you treated the file data. You then extend this technique to work with the files have.

• PC will not 'see' Mac on the network wireless

  I just installed a Linksys WRT54G Router, and created a home network, which includes free Wi - Fi for my MacBook Pro.  The ethernet connected PC does not 'see' the Mac.  I know they are connected from the Mac can access the internet and can see files in folder on my part that I installed on the PC (after I have provide the password).  I'm running VISTA on the PC.  The network is set up in a private capacity.  In the "Network and sharing" screens on the PC, the network discovery and file sharing are on.  I checked with my internet provider to ensure that their safety programs are not the issue and found that starting the PC in safe mode doesn't change anything.  The card network and sharing or full view map only shows the PC, the name of the network and the internet.  It never shows the Mac well that the Mac indicates the network name as its connection.  Can anyone help or is it a problem that can be a gazillion things?

  Hello

  I suggest you to see link and check if it helps:

  Mac 101: File sharing

  http://support.Apple.com/kb/ht1549