Printing problems Lightroom CC

Similar Questions

• CC with Adobe Lightroom and Photoshop CC - printing problems

  I have a printer Canon Pixma Pro 100.  All of a sudden I have printing problems I've ever had before.  It seems since the last update.  If I want to use the paper 4 x 6 in the Lightroom print Module, the printer will print the 4 x 6.  If I want to print 4 x 6 paper 8 x 10, it prints 4 x 6 but much info on the image of the cultures.  If I print an 8 x 10, etc, the same issue of culture exists.

  Now for a dirty word.  If I print off On1 / 10.5 I have zero printing problems.  If I print on any program be it word processing, image processing software, I have no problem.

  I only get these problems when printing out CC Lightroom or Photoshop CC.  Quite honestly, I have the latest version of items, but he tried not to frustration.

  I went on Canon's site and they have a new driver for El Capitan and say that Apple should have loaded in their updates.  I did all the updates.  My Canon firmware is up-to-date.

  I reloaded even Adobe software and the same problem.

  Any help would be appreciated.

  Elliot Stern

  [email protected]

  It's Apple 10.11.5.  What do I get for the automatic upgrade.

• Printing in Lightroom 5 problems

  I have problems printing in Lightroom 5 and it's very frustrating! I spent lot of money of ink and paper, but I still have the problem.

  I run MacOS 10.9, Lightroom 5.3 and I print on an Epson R3000.

  The first problem I had was that images were printed on just a small part of the paper and cut images. I've attached a picture showing this. I completely reinstalled my computer and now it seems that this problem has gone (for now at least). But now, the images are printed, but much smaller than the paper, I said. If I said I got something close to the A4 A3 +. Print borderless on 6 * 4 seeks to work as it should, but it's the only one I was able to print so far.

  I tested printing from Photoshop 5.1 and which worked find.

  I'm getting desperate here, please help!

  

  Hi Tommy,.

  I just hit the same problem and hoping that you've cracked it now!

  Like you, I'm under Mac OSX 10.9.1 and Lr 5.3.  No problem previously with Lightroom 4, 3 or 2 on OSX versions.  I can print on A4 no problem, but when I try A3 apparently evolve to correct A3 but cultures up to A4 (borderless?) in a corner, similar to your experience.  Ultimately I have to use Photoshop, I guess!

  I forgot to say, I'm on Epson 3800 printer.  I need to make a few prints A2 next week and I wonder if they will be more effective than the A3.  Having to use Photoshop seems a real step backwards.

  Geoff T

  PS - I've found a workaround.  Some of my images are in portrait format and, guess what, they work very well to the format A3.  I then tried an image in landscape format but printed by print module, as if it was portrait - worked well.  It's better than having to use Photoshop for printing.

  There is obviously a bug with Lr5 using Mac, but of workaround seems an easy option.

• Cannot print in Lightroom

  I have a 6500 canon printer installed on my mac.  It is fully recognized and I can print of all programs, including Adobe Photoshop CC.  However, I can't print from Lightroom CC. It is completely grayed out.  I can print to file, but cannot print directly to the printer.  Print settings are all fine and show the printer as being online.  I uninstalled and reinstalled the printer, restart the mac, turned off and unplugged/replugged the cable to the printer without result.  Any help would be great appreciatedP

  How is it gray? Do you mean the button "print"? Who gets grayed if you have selected right JPEG file under the print job in the Panel on the right. Make sure that who is set to "printer". You should be able to print on any printer that you have installed in the operating system. To get the best color, you may have to play with the settings and profiles, but avoid any problem printing to any printer that the OS can see.

• The printer options not available when printing from Lightroom

  Hi all

  I have a problem with the interface of Lightroom 2 (version 2.4, executed in 64-bit mode on my Intel Apple Mac with Mac OS X 10.5.8 (Leopard)) to my printer driver, an Epson Stylus Photo R800.  I can see looking through the forum that there has been a lot of problems with printers, but none as far as I can see that seem to cover my particular problem.

  In the Lightroom print module, after setting everything up, selecting the correct ICC profile for the printer/paper etc. I click on the button "print...". "at the bottom of the right panel to launch the dialogue of the printer.  My problem is that the essential options, I need access to this printer dialogue, namely 'Print setting' (to determine the media type, and print quality) and "Color management", (to disable the printer color management)-are disabled.  To be exact, these options have a line through them, as if they were crossed.  "Print option" and "Setting the Extension" are similarly disabled, while "Layout", "Paper handling", "Cover Page" and Planner "are available.  (See JPEG screenshot attached.)

  If I try to select one of the options not available such as 'Color management' I see the following on the screen error message:

  "The bundle 'Color management' couldn't be responsible because it does not contain a version for the current architecture.  Contact the creator of all here for the most recent version: Color Management 3.09, SEIKO EPSON CORPORATION 2001-Copyright (C) 2005. All rights reserved. »

  The strange thing is, if I print from Photoshop CS3, there is not this problem: "Print setting" and "Color management" are not disabled, and I can make the adjustments I want.

  Coming off the printer prints color are way off if I print from Lightroom, so that from Photoshop, they are great - I guess because of this problem (I can not turn off printer in Lightroom color management, so that I can in Photoshop).

  I guess that this is a problem in the interface between Lightroom 2 and my printer driver, but I find it strange that I don't have the same problem in Photoshop.

  I have re-installed the latest printer driver downloaded from the website of Epson many times, following the instructions to the letter to Epson to remove the old drivers of my machine, to nothing does not.

  I really want to print from Lightroom instead of Photoshop, I like the simplicity of the Lightroom print module.  Can anyone throw any light on this?  Any help or ideas gratefully received!

  Thank you

  Ian

  Just save a driver of printer/preset in any 32-bit application. Then apply this preset when you print from LR runs as a 64-bit application. It is only the interface that is the problem. It should show very well, at least it does with Canon printers.

• Where can I find better, more correct instructions to solve printing problems by editing prefs.js?

  Instructions of "resolve printing problems | Firefox Help, line 6. Delete all the lines in prefs.js that begin with print_ and save the file. "do not match what is actually in my prefs.js file.

  In other words, he didn't y not the lines * beginning * with "print" or "print_". However, the string of five characters 'print' is * very * many times buried deep in a line of characters, but never at the beginning of a line and rarely followed by underscore. So I have no idea what I'm actually planned to do to solve my problem.

  It seems to me that this is just a badly phrased statement that might be more appropriate for someone who is familiar with the codification and development of software, which I'm not. I don't have the time, experience or knowledge to understand. I need more literal/explicit/specific instructions.

  The printing problem I have is that I have to print via WiFi to a printer in another room wired to another computer, and Firefox seems to switch or possibly reverse scales fonts for information of margin and the text of the Web page. In other words, the title of the document, date, time, prints etc very wide and the content of the page text prints almost too small to read.

  If there is a lot of user set prefs involved that need to be reset, then it's much easier to delete related lines of the prefs.js is each of them with the button straight on the topic: config page and click Reset.
  This is the main reason (single) to edit the prefs.js file.

• Print problems with the recent update to Version 10.11.5

  Print problems with the recent update to the Version of El Capitan 10.11.5.  Cannot print to my Epson and Samsung printers after update to new IOS.  Print jobs get hooked on my Mac Pro.

  Roger 510 wrote:

  Print problems with the recent update to the Version of El Capitan 10.11.5.  Cannot print to my Epson and Samsung printers after update to new IOS.  Print jobs get hooked on my Mac Pro.

  Have you checked with Epson for an updated printer driver?

• From updateing to 8.1 WIndows printer problems

  Until I updated to Windows 8.1 other months everything was going well on my new laptop, then I went to something of my HP Photosmart B109n scan and it did not work because the pilot was now missing and the application that replace the HP printer driver HP is useless.

  On the advice of the HP site, I tried to download the new driver, but it wouldn't go, he said I had to remove the exsisting installation but when I try it just reboots the computer, but is still there afterwards. It turns out the uninstall has disappeared from the current and installation does not appear in the installer I downloaded.

  As a last resort, I used the system restore but has not only the printer has not changed but now some pre-loaded apps will not work and ask to renew the license of developers.

  I'm a lost what to do next - please help!

  Your laptop is not known to me, but in the case of update 8.1 Win, you should check this update from Toshiba to win 8.1 page: http://www.toshiba.eu/innovation/gen...ws8_1-message/

  There you can check if the Win 8.1 is supported on your laptop and how to perform the Update step by step for Windows 8.1
  Some drivers must be uninstalled and updated after installation of update 8.1 to win!

  Regarding your printer problem:
  Each manufacturer of the printer contains own drivers for the Windows System.
  We don't know me if HP released Win 8.1 compatible drivers for the printer Photosmart B109n clean, but to be honest, this problem is not related to the Toshiba laptop. If you have problems using HP printer under 8.1 to win, you should visit the support page of the printer manufacturer for troubleshooting tips and workaround solutions.

• Eny HP 4520: Printing problems in word Document with photo

  I just purcahsed a HP Envy and I use the function print via the wireless option. I have a word document that I was able to print in the past which has an image inserted into the document. All in the words fine printing copies only the upper left photo f. When I show preview before printing, it shows that if the whole of the document will print correctly and the image should print very well... I have attached what print preview looks like and what actually prints

  Hi @dmanyeah,

  Thank you for reaching out to the forums! I understand that you encounter printing problems in Word, the full image is not printing. Thanks for providing the screenshots. I'd love to help you.

  Try to print a picture from another application to see if you have the same problem.

  To exclude the driver, install a generic driver to see if you have the same results.

  • On the computer, go to start, devices and printers, right-click on your printer and select printer properties.
  • Click the Advanced tab and click new driver, and then click Next.
  • HP Deskjet 9800 by selecting in the list or the Deskjet 990c printer, click Next, Finish, and apply the settings. (you can always go back and revert to the original printer driver)

  What version of Word are you using?

  If the problem is resolved and you appreciate my help, please click on the "accept as Solution" and the buttons 'Thumbs Up'. Let me know how make you out. See you soon!

• Printing problem on deskjet 4510 with windows 8.1

  I bought a new deskjet 4510 and have installed via usb on my desktop running windows 8.1. This isn't the impression through products of ms office word, excel etc. and either through wordpad. I can print Notepad files and pdf via adobe reader software.

  I tried HP print and scan doctor who did not find any problem with the printer and print a test page.

  I tried uninstalling and reinstalling, setting the printer wireless to the top but could not do print.

  I looked at the help on this forum and also tried selective installation, disabling all services except when starting microsoft services, but the problem remains.

  Help, please.

  Hey @rshri7869.

  Welcome to the Forums of HP Support!
  
  I understand that you meet your HP Deskjet printing problems in advantage 4510 series e-all-in-one printer to your computer Windows 8.1. You have included a large number of useful information in your post, so thank you. After reviewing the troubleshooting you have already finished, I came to the conclusion that what you feel is a conflict of driver on your computer Windows 8.1. To fix this please follow the steps below.

  How to add another driver:

  1. Open the Start screen (by selecting the windows start button in the lower left corner or by selecting the "Windows" button at the bottom left of your keyboard to the left of the 'Ctrl' key
  2. In the start screen, type "Devices and printers"
  3. If the option devices and printers automatically fills, click settings at the top right and then click on devices and printers.
  4. In the devices and printers folder right click on your series Deskjet 4510 and left click on printer properties
  5. Left click on the Advanced tab
  6. Left-click on new driver
  7. When the new window driver opens just hit 'next' until you see a list of manufacturers on the left and a list of printers on the right.
  8. Select HP as the manufacturer on the left
  9. DeskJet 9800 select the printer on the right. If Deskjet 9800 is only select "Windows Update" at the bottom left and once the update has been completed, you will be able to select Deskjet 9800.
  10. After selecting Deskjet 9800 hit next complete the new driver Wizard
  11. Under the printer properties window, select 'Apply' but do not hit OK
  12. Select the general tab
  13. Rename your printer in HP Deskjet 4510
  14. Click OK
  15. Finally, right-click on your Deskjet 4510 series once more and click on Printing Preferences
  16. Left click on the paper/quality tab
  17. Left click on the dropdown 'Normal' for the print quality down to the right and change its normal fast
  18. Press apply and OK
  19. Try to print!

  Please let me know if the steps I have provided to resolve your problem. Good luck!

• HP Color Laserjet CP2025 print: color printing problem

  Had the printer listed above for several years and love it.  Have just started having problems with the printer does not print not not in color.  Have a recorded document that needs to be printed every month and have had no problems with it, until yesterday when it is printed in black only.  Another document word also printed in black only.  I printed a test page printed correctly.

  Don't know if there is a definition in the document, or is it a printer problem.  Help!

  Welcome to the community @mwillis HP

  I came across your post about the color printing problem and wanted to answer to help with my suggestions. Please see the guide below to resolve this issue.

  HP Color LaserJet - cannot print in color or impossible to Auto-Duplex (two-sided printing fails) after the installation of the UPD

  Let me know if you have any questions.

  Hit the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

• How can I fix printing problems?

  IE prints OK but does not print Mozilla
  I'll have to delete Mozilla if I can't print.
  Please notify

  Operating system

  Win 7

  Hello Pitasi Marty,

  Many printing problems can be resolved by disabling print.* in all preferences: config. Here's how:

  1. In the text filter box, type print.
  2. Right click on each remaining parameter, and then select Reset.

  Try to print again and see if the problems still happen!

  Kind regards
  Tobbi
  Firefox Support volunteer

• C6180A: Network printing problem series C6100

  Hello

  I pray that someone here can help with my network C6180A impression of questions, as I am at a loss to know what to do. I'm technical enough for a layman (not irritable) so able to fix my printer problems, I had to do several times in recent months. However, I am now in a complete deadlock as to what to do next.

  Implemented - laptop HP Pavilion (less than 1 year running Windows 8.1 64bits) connected by wired home network using Netgear HomePlugs, on which my C6180A All in One Photosmart printer is also connected by a Homeplug Netgear network around my house for others to use. The network software Netgear genius picks up the printer and it shows on the fine network. I can also access the IP address of the printer through my thin Firefox browser.

  Printer C6180A is (I think) about 8 years ago and has been well used with over 44 K printed pages! It worked well overall until recently. Minor problems have been solved in the past, which I was able to do very well.

  Until recently, the printer worked very well, so a few weeks ago (nothing has changed on it, or my laptop), it just started to stop printing and also started to enter spurious characters (always number 7) on the LED panel without doing me anything, as if someone was going to put in a fax number. It would show a string of 7 like this: '7777777777777777777' as a fax number alone.  Yet I did not or use the fax on it more. It's where I wondered about capacitors, as I mention below...

  However...

  It will not print many pages at once of all today - even if I get it print OK. It does not go offline (it used to do this), just print job gets stuck in the queue and must be deleted using HP Print & Scan doctor. Nothing else removes the queue now. And no other problems are reported with this utility. If they are, then I have Setup or the utility corrects.

  I did the following to get it fixed so far (with little success ongong):

  -updated and install printer via the HP website drivers (most recent is dated December 6, 2015)

  -uninstalled and reinstalled the driver software several times = sometimes a test page impressions, not always

  -restart the laptop and printer each time I do this to clear no matter what cache

  -Remove and add the device in Control Panel = got a few pages printed today this and nothing else then prints

  -check the IP address of the printer to make sure that his recognized on the network = all fine here (IP address added manually in the settings of the network on the printer a few months ago), although I can't make it here anymore as the "ok button" on the printer does not work now (minor in question not related to this in my opinion)

  -did a hard reset of the printer using the # and 6 to do this = it worked for a few pages then orders

  -printer is always / recognized by any software, driver or utility HP PSD when turned on to be detected to install

  -printer works fine when connected directly via a USB cable, but which is not what I want to do on a daily basis

  -have contacted Netgear in the recent past to make sure that my HomePlugs on my network worked very well, they were. If not, then the printer would not be detected by any software installation or fixing with HP PSD

  My last resort will be to check if the capacitors are down, I saw in other forums that this is a common problem after a while on these printers. Before making this "repair" I bought the capacitors, I wanted to check if there is anything else I missed that I can do to finally once and for all this problem of printing.

  Help on this would be so MUCH appreciated by any expert here, because I lost so much time, days in fact, try to resolve this issue as you can only imagine. I have to be able to print for my business. It is not an option to replace the printer currently.

  It worked fine until the last 3-4 weeks or more... Where my question detailed with what I did to fix it until now.

  Thanks in advance. ANIA

  Hello @AZS1,

  Welcome to the Forums of HP's Support. I understand that you have a problem with your C6180A. I would like to help.

  To be honest, you did some troubleshooting. To say that you are quite technical for a layman seems to be an understatement.

  I provided you with a link to solve network problems. If the problem persists then you might as well go ahead with the repair. The only other option would be to have fix the printer.

  "Printer not found" error message for printers all-in-one HP Photosmart C6100 C7100 and Officejet Pro L7700

  Please let me know how it works. I'm pulling for you.

• Pro9000 canon printer problems

  For those who know Canon printer problems after upgrade to El Capitan, this is the site for you: https://goo.gl/Ga55aB specifically, I was getting crazy trying to reconfigure my Canon Pro9000 until I found this: https://goo.gl/naQKPl click on the box of pilots.  Voila!  He says there was no software available (and specified on the Apple site there is no solution), this driver worked perfectly.  Good luck everyone, hope this helps!  Deb

  Thank you thank you thank you for sharing the link!  So frustrating to hear nothing of Canon, when I asked him...

• HP7500: printing problems

  Windows 7

  HP7500

  Wireless printing

  Can print PC test page, but not Word document print.  I have this intermittent problem and sometimes after printing test page for the PC, the document will be printed.  Sometimes I have to run print and Scan doctor. This time has solved the problem.  Printing and scanning doctor said nothing wrong and print a test ok page. Still no Word document printing.

  Hello @Eric4and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you are experiencing printing problems. I would like to help!

  I would like to start by running the following two uninstall process:

  The problems that the programs cannot be installed or uninstalled

  Uninstalling the printer software

  Once it is uninstalled, I suggest you put your system in clean boot mode in the configuration of Microsoft.  You can do this by following this document: How to perform a clean boot in Windows.

  Once the computer is in clean boot mode, I would suggest to reinstall the HP printer install wizard for Windows.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!