Printing using glossy paper Photosmart HP 5510 problems

Similar Questions

• Printer Officejet Pro 8610: Officejet Pro 8610 prints on glossy paper matte finish

  When I load 4 x 6 HP Premium glossy photo paper, my printer prints a Matt finish on my photos.  How can I get it to print on glossy photo paper brilliant finishes?

  Problem solved, the media type the tab paper/quality HP Photosmart Essentials 3.5 has been changed from HP Premium Plus Photo paper which enabled for your paper prints of HP Premium presentation Matte that has caused the printer to print 'Matt', not brilliant brilliant photos.  Sherlock.

• Photosmart HP 5510 - problem with the icon of the printer

  The icon of the printer that takes you to the Panel to choose print, scan, etc.  now keeps asking if I want to install a new printer... No. A use HP Print & Scan Doctor and on the analysis of test, everything is fine.  Try to start a new search icon and back to the drawing board.  I'm connected wireless and on Vista.  It makes me crazy.

  Someone at - it ideas or is it a matter of uninstall/redo with the disk I have?

  Thank you

  Annie

  I appreciate your ongoing efforts, I would like you to answer all of the steps listed here. Please do the steps listed, if you are still running into errors do NOT run everything as the PSDR printer utility. I think that the multiple uninstall and relocations are now causing a problem.  I understand that you already did uninstall it and reinstall by following the instructions, but I think we can try a different approach. Please post back and let me know the result and we can continue from there. See below:

  • Hold down the Windows Logo key () on the keyboard and the 'R' to open the dialog box run, type %temp%
  • Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
  • The new software - uninstall the printer software Instructions
  • Once the uninstall is complete, reboot the computer
  • Follow these steps to reset the registry settings and options for Windows Installer.

• Will not print using the HP Photosmart software

  Hi... since I upgraded to Windows 7 (hp) to Vista (hp) and downloaded all the updates I have two bad problems and that it is urgent advice please!

  1. When you use Hp Photosmart edition / printing software for pictures... workd all well until I told it to print and nothing happens. Then I get a message saying that the software does not respond?

  2. when I use Picasa photo editing for photos they print Ok but have a line through the middle of each picture?

  Hey Pete,.

  Thanks for the update.  I'm sorry to hear that you have been hospitalized and hope everything goes well!

  The line occurs only in photos, Picasa print?  Have you tried to print a picture from another location such as the Windows Photo Gallery?

  It is possible that this problem is caused by a problem between the Picasa and the drivers of the printer.  Try to use another driver like the Deskjet 990c or driver Deskjet 9800.  For more information on how to use another driver, please click here.

  Let me know if this helps remove the line in your photo prints,

  Jason

• Printing error of paper Photosmart HP 7510 on Mac

  I've been pring with no problems until today. I even printed my Samsung tablet with no problemslate wireless last night. This morning when you print a Microsoft Word document, I received this message as it starts to print but never finished

  Error message:

  "Too short for auto-recto-back of paper. To cancel the print job, press the Cancel (X) button on the printer. If you want to use the shorter paper, you can manually duplex it by selecting "manual duplex" in your software application, or 'print the odd pages' and 'print even pages' in the print driver. »

  I went to change to print from a main plate, I even doubled to make sure that the paper size and orientation was correct. I even did the steps in the troubleshooting HP for Mac page

  "'Paper mismatch', or 'Difference of paper size' Error Message When printing.

  I have never changes the size of the paper size letter. No matter who or HP there all suggest to solve this problem?

  Hi woodstock21,

  Thank you for visiting the Forums from the HP Support! I see when you try to print a Microsoft Word document, you got this error message:

  "Too short for auto-recto-back of paper. To cancel the print job, press the Cancel (X) button on the printer. If you want to use the shorter paper, you can manually duplex it by selecting "manual duplex" in your software application, or 'print the odd pages' and 'print even pages' in the print driver. »

  After some research, I found this useful thread with a solution:Duplex turn paper message too short

  "Simply reset the printer: press the power button, let it power down." Wait 30 seconds, and then turn the printer. "

  I hope this helps! Please let me know the results.

   

• Impossible to get ipad, iphones to print using wireless on Photosmart estation e510

  I have a photosmart estation e-510 and I'm trying to get my assortment ipads, iphones to print wireless using this printer.

  I downloaded the iprint applications, and I have the function working on the printer wireless. Apple products will not recognize the printer. I use a router dual-band.

  I looked on the forums, on the HP website to no help.

  Any help would be appreciated

  Bob

  Let's start with a reboot of the router.  Pull his plug for a few seconds, reconnect and wait for it to start.

  So who disobeys, restart your printer and your iOS devices.   Make sure that all devices have the latest firmware.

• Photosmart 7510 - will not print black on any parameter of photo paper (does not print on plain paper setting)?

  HP Potosmart 7510, printing from a memory card.  Using premium photo paper (glossy), set printer to print on HP Premium Plus Photo), printing out with Black/Brown areas in the blue-green instead of black.  Printing using plain paper, set printer on regular paper, just fine.    Same thing happens when I tried Advanced Photo and a Photo paper - print comes out with a blue-greenish cast in areas that should be black/brown.

  Tried to print a black and white photo - identical to all other attempts - if the choice of the photo options paper, the dark areas are blue/green.

  Comment - then try printing from the computer (wireless), produced the same result - black areas are printed in blue-greenish.

  Tried cleaning the cartridges, alignment printer, print quality status report looks very good.

  Door on this forum and general web search.  Nothing has yet solved problem.

  What should I do?  Any ideas/suggestions?

  Yes, this is the case on a 7510.  I worked on the answer.  Although "ink" diagnostice demonstrates both the black and the cartridges 'photo black' as being low, the 'black photo' was apparently empty.  The black of the photo must be called only because when the print properties are defined for the "photo paper", and when it is empty the black dark areas print in blue-green.  I thought that the black photo cartridge was a gray, for most thin shades grey, but maybe it's an intensifier of some sort.  It's a shame that HP does publish no real information.

• How to scan a document of several pages with a Photosmart HP 5510

  I want parsing a file page 17 but when I scan the first page it just says: registered under the Scan 001 and does not give me the ability to add pages more like my Epson printer used to!

  The 5510 is not able to scan multiple pages to PDF? If Yes, how would you please.

  I thought about it... I did find this answer anywhere else, so I hope others come to this stream to see...

  It would seem that, if your resolution is as high as 300 dpi, it you cannot scan multiple pages, must be because the file size would be too big... smart? or just annoying... not sure, but at least now I can do multiple pages...

  SOLVED!

• photosmart HP 5510 vote B11a: noise and Auful printing problem

  Hello world

  I'm new here.

  I have a problem with my photosmart HP 5510 printer, when I try to print it makes a terrible noise and it does not print.

  I try update firmware, reset the printer, change the cartridge, remove all the piece of paper, but nothing.

  Could you help me please?

  Thank you

  Alessandro

  Hi @alessandro96

  I'd love to help you with the sound that you hear from the printer. I understand that you have already begun to solve the problem, but the noise remains. Please post back with the answers to the following questions;

  1. Is the printer on a flat surface?
  2. How long has noisy for the printer?
  3. Didn't help then the noise started? (ie. the paper, printer error message jam was fallen/hit, surge)
  4. There are flashing lights, or the error messages on the printer?
  5. When was the last time that the cartridges have been changed?
  6. If you are a Virgin copy, when you hear the noise?
  7. If you open the printer do you see broken parts?
  8. When opening upward where the cartridges go, they move freely?
  9. The cartridges are installed correctly? (ie. the cartridges are level and does not appear).
  10. Perform a hard reset. With the power on remove power cord from the back of the device, then from the wall outlet. Press and hold the power button for 30 seconds (drains the excess power of the printer). Plug the power supply into the wall outlet, then the printer.
  11. You still get the noise after that?

  I look forward to hear from you.

• HP Photosmart Premium C410b: printing using panoramic photo paper

  Hello

  Is anyone able to tell me how to print using A4 panoramic photo size.

  Thank you

  Hi @Silverback2,

  Welcome to the Forums of HP Support!

  I understand that you are curious how to print on A4 panoramic photo on your HP Photosmart Premium C410b printer paper. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem.

  Your printer is not designed to print on that size of paper. If you want to print on the paper, I think that a DesignJet is better suited for these types of photos.

  Specifications of printer for HP Photosmart Premium Fax all-in-One printers (C410a C410b, C410c, C410d, C410e)

  .

  Sizes and types of paper

  Paper

• Photosmart HP 5510 - will not print using black ink

  I have problems with my HP Photosmart 5510 all-in-One printer, because it will not print in black. All cartridges are brand new and are genuine HP cartridges. I've never used anything other than HP cartridges, and I believe that I have would be considered a very light printer user.

  I use a HP Pavilion Desktop PC (Vista Home Premium) connected to the printer via a USB cable.

  I have to 'reset' the printer (power cable removed for 20 seconds), I cleaned the print heads and tried to re-alignment of the printer.

  I ran HP print and Scan diagnostics and do the message "Everything out OK with your product." I then print a test page which "fails", that there is no black ink in use. The diagnosis confirms that the ink levels are all OK and that my printer uses HP authentic and than Normal inks or better quality is selected.

  The printer is a little over a year old and as mentioned has had very light use.

  There is no error - every reason to believe that everything is OK.

  I wish I had a solution to this problem.

  As by chance my previous printer a HP Photosmart 3210 all-in-One failed in a similar way, although in this case, the black was fine, it was impossible to print colors correctly. Once the printer was just out of warranty.

  Curiously enough and fortunately like few others on the forum a few days after the installation of the new cartridge, it seems to work perfectly fine again.  any ideas as to why this happens?

• Not able to scan from the printer to my computer control panel using the HP Photosmart 5510

  Hello

  I recently bought the new HP Photosmart 5510 all in one - and I am not able to scan from my printer to my computer.

  I am however able to scan by launching the scan of the computer. I talked to HP customer earlier this evening and we ran printing + scan doctor and can't find any problems.

  I am running Windows 7-64 bit and that you have installed my wireless printer using the Installation CD supplied with the printer today.

  I could not finish troubleshooting with the technician that I talked to because I had to go to work. The person that I spoke with proposed possibly the full functionality of software downloaded from the hp.com site, which I'm happy to do, but I think that it is useless, because I have the CD of installation here. (The rep that I talked to was very nice, but I prefer not to have to uninstall and reinstall if it is not necessary)

  Because as I mentioned above, everything works perfectly and I am able to scan - but not directly from the printer itself.

  When I try to scan from my printer to my computer an error message appears on the control panel of the printer indicating that: there is no scan destination options of analysis chosen / no..

  However, I can't find anywhere with my HP software where I could add / make sure that the destinations were there. (As I could on my other printers. (IE. By the solution Center)

  This printer does not appear to be a solution center that I could find and the scanner installed with the CD icon doesn't give me any options regarding changing the settings of the parser

  I wonder:

  1. the Hp Photosmart 5510 does not have the capacity to scan from the printer control panel?

  2 OR the CD installation provided with my printer only has the base drivers as the agent of tech support suggested? Which means to scan from my printer I need to download drivers for your hp Web site?

  3. or is the problem because of something else entirely?

  Thanks for your help!

  HI Dublin,

  Follow the steps below to uninstall and reinstall the printer.

  1. open Control Panel

  2. click on uninstall a program

  3 uninstall the Photosmart 6510 in the list

  4 restart your computer

  5. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  6 download the drivers and full software functionality, and then reinstall the printer.

  Version 28.8

• Photosmart HP 5510: Error with the same type of print cartridge black that I use for more than a year

  Hello

  For the last days I'm not able to print anything from my Photosmart 5510, because I get the error message "" Black - cartridge incompatible generation more "or 'cartridge for printers of older generation'." In addition, it does not give me option as before proceeding, in any case and I can't activate wireless. So, actually I have no printer at all. I reinstalled the driver but the same thing, after I did that and restarted a printer.

  I've been ordering cartridges on eBay and Amazon for a few years now. They were not HP and printer always said to me that it is not genuine HP cartridge. I have no problem with notifications, as it prints well. I printed several pages of document .pdf only 4-5 days.  No problem at all. My ink level is very good, especially black, because I was always ordering the largest capacity I print a lot.

  This problem started today (or I had knowledge about this today) and there is no doubt that something has changed between the time where I printed the last time and now. But it's pretty clear that HP wants me to buy original cartridges. Is it not enough that my laptop is HP, my printer is HP... I should have freedom to choose what ink to buy and where to buy it. It worked a few days ago and I checked the black cartridge, that I get the error message, has at least 50% of ink left in it. Because HP wants me to throw it away, because it's not authentic?

  I'm really upset, because it is not a software, where we have to use the original permits. It's MY printer and I get to choose what cartridges I put in it, and where I buy my cartridges. If there answer like "it is not comapitble, etc.", well, it worked for a long time and printer tell me that there is problem with it. The problem with the cartridge just 'old generation '.

  If HP conitinues to press like that, I'll never buy anything HP again.

  Hello again Senahid77,

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly post information and series numbers.

  If you are unfamiliar with the operation of the function of private messages of the Forum, this post has instructions.

  Thanks again for your time.

  See you soon,.

• What configuration to use for the paper to use Staples label paper photosmart 5510

  I have a photosmart HP 5510, on paper defining it does not "thick paper" when you use staples or avery label paper.

  It shifts the label paper just by using the parameter "plain paper".  Suggestions as to what paper to use setting.

  Thank you

  This printer does not appear in support of printing labels according to the specifications of the product. You may be able to do work using a different printer driver. I will connect these instructions below. If this does not work, you will not be able to print labels with this printer.

  How to assign other drivers to print in different Versions of Windows

• 0x6100000bhaving a problem with my photosmart hp 5510 printer... Help

  problem with my photosmart hp 5510 0x6100000b please help the ink tray won't

  Hi, I know that this post has been done for a long time, but I just wanted to check if it is resolved? Do you have a warranty replacement printer?

  Thank you

  Ciara