problem connecting to the web active ECC RFC

Similar Questions

• problem connecting to the web services server

  I tried to download the latest updates of software/firmware for my all-in-one HP Photosmart Prem C310a.

  I can't get updates or activate Web Services because it still gives me the error message "problem connect to the web services server.

  I tried everything in the section of the Web of HPs site including connection via WPS - unsucessfully problems.

  I understand that you have found impossible to connect to the server error message on your printer. I would first disconnect the router and the printer for about 1 minute. I would plug the router first then the printer. I would then try to enable web services. If not successful, and you get the same error message. I'd follow these steps.

  1 obtain the IP address of your printer
  a. This can be done by pressing the icon on the printer wireless.
  2. Enter the printer's IP address in a browser.
  3. Select the tab network at the top of the page.
  4. on the left, select network.
  5. Select Network (IP) address
  6. select manual DNS server
  a. manual Preferred DNS should read 8.8.8.8
  b. alternate DNS server should read. 8.8.4.4
  7. Select apply you could get a fair warning select OK.

• "Problem connecting to the Server Web Services." - HP Envy 100

  Hello world

  I wonder if anyone has the same problem as me. I just got a HP Envy 100 and went through the process of setting up without problem. The printer is connected via Wi - Fi for wireless network, I can ping the printer from my Mac successfully and I can print within the network without problem.

  However, regarding ePrint and Web features, it seems that nothing really works. I can't even turn on Web services, I always get the message "problem connecting to the Web Services server.

  I tried the following:

  -Restart the router and printer

  -Change the manual IP address and manually set the DNS server

  -Reapply automatic IP and set the Google DNS (8.8.8.8 and 8.8.4.4) servers

  .. .with no chance whatsoever. If this is a problem with the firmware (from what I understood, I do not have the latest firmware, but I can't ask her update, because it requires, you guessed it, a connection on the server of web services, that is the whole of the problem.)

  Anyone else having the problem? Everyone had it and fixed it? Is this just a temporary problem with HP servers?

  Thanks in advance!

  Hey, for me it works as well, and I didn't, just retried that I had tried before and it connected to the Web Services without problem.

  So I think it's safe to say that the original problem in this topic only lied to a HP Server-side problem. Not cool it took so long for them to solve and in particular the fact that we did not really have feedback appropriate about the problem.

  Anyway, I solved (for now, at least).

• Laptop has virus and still unable to connect to the Web site after his withdrawal.

  Original title: laptop cannot connect to router

  my daughter portable computer had bankerfoxa virus I think that I got rid of but she still can't connect on the website I want to download microsoft security essential on his cell phone how if I can not connect? pls help

  Hi trinidadg,.

  Also try the following steps, you have a problem connecting to the Web sites.

  Try to do a System Restore to an earlier date when your computer was working well and try to run a scan for malware removal.

  Try to reset the Proxy settings to connect to the internet, as some malware enable proxy settings that block your ability to browse Internet sites.

  To reset the Proxy settings:

  Click Start-> in "search programs and files" type CMD-> in the programs in the list right click CMD and click 'run as administrator '.

  In the command prompt, type the following and press ENTER:

  NETSH WINHTTP RESET PROXY

  Restart the computer

  Touhami

• After the upgrade to Firefox 5, I get a message: "Firefox is currently in offline mode and cannot browse the Web." IE 9 connects to the web without problem. Suggestions?

  This began immediately to FF5.0 installation after the upgrade to FF3.6.18. I uninstalled and reinstalled both 3.6.18 FF and FF 5.0: the old version connects to the web without problem, but FF5.0 never does. IE9 is able to connect properly.
  Thinking that my firewall software (McAfee) might get in the way of FF5.0, I uninstalled, but remained the connection problem.

  Check this setting:

  • File > [] work offline

• Unable to connect to the Web site of 'report a problem '.

  I'm having a strange problem signing on the Web page 'Report a problem' in order to report a problem with an application that I downloaded via the iTunes store. I went to purchase in the iTunes store on my computer, click report a problem for the application in the order and he took me to a Web page called 'Report a problem' and asked me to connect.  However, I enter my information and click on connect, but the page just refreshes and doesn't connect. I know that my sign in information is correct (in addition to using it in iTunes, I just used to login here to post this question) and I came many times to just in case there was a typo in with my password.  I tried a longer password and it gave me the error "your AppleID or your password was entered incorrectly" so he is grateful to my info... I tried to clear cookies and cache from my browser (Chrome).  I also tried to use Internet Explorer and Edge to connect, but both had the same problem.  I couldn't even find a way to contact Apple on this specific problem... their support menus not occurred for problems of website that I could find at least (if someone could point me to that, I can try that as well).

  I had no problem connecting to https://reportaproblem.apple.com/ earlier. A temporary glitch perhaps?

  TT2

• There was a problem connecting to the server 'SERVER NAME' error guard appearing

  There was a problem connecting to the server 'SERVER NAME' error guard appearing even though the server is not on my current network.  I recently moved my iMac to a different location and a different network, and now he constantly tries to connect to the old server.  This message appears every 30 seconds and several of those who appear (see pictures) it's extremely frustrating because it makes the machine almost useless because I am constantly closing them.  No matter how many times I try to stop the activity monitor it it keeps reappearing, and I even tried a few terminal commands that I found online, then restarted the computer, but still had no success.  I would appreciate all the advice really.

  I hope that gives you an idea of what I got!

• down loaded more recent firefox and now it does not connect to the web.

  Just did the new down load and restarting the Fire Fox cannot connect to the web.
  No problem before this new version.
  IE works fine. Chrome works very well.
  Only fire fox does not.

  You get this error message.

  See also article Firefox cannot load websites, but can other browsers .

• I plugged a Linksys router for my Hewlett Packard desktop computer, it shows that it is connected with great resistance, but it won't let me connect to the web.

  I connected the router to my computer desktop Hewlett Packard, it shows that it is connected with great resistance, but it won't let me connect to the web. I also have a mid/fi through Verizon set up on this computer, but I have recently installed Magi jack more and it uses far too much data for the MiFi. What should I do to fix this?

  Hello

  ·         What is the error message or the error code that you get when you try to connect to the Internet?

  ·         What is your Linksys router connected to an Internet service provider?

  ·         Were there any changes made to your computer until the problem occurred?

  ·         What version of the Windows operating system do you use?

  Click on the link below.

  http://Windows.Microsoft.com/en-in/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  To solve the problem related to the Magic jack plu and MiFi Verizon:

  I suggest you to contact Magic jack support. See the link below.

  http://MagicJack.com/customercare.asp

  Contact Verizon support. See the link below.

  http://support.verizonwireless.com/CLC/

  Provide us additional information. So that we can help solve you the problem on your computer.

  Hope this information helps you.

• Unable to connect to the web proxy/services

  Unable to connect to the web proxy/services used for officejet pro 8600 as well as using verizon fios actiontec router.  I tried wireless and ethernet.  Connectivity seems good.

  Resolved.  Port forwarding blocked by another application of verizonwebcamera problem.

• Error - 'Auntentication with the server failed. Family Tree Maker software does not connect on the Web dashboard.

  Original title: Family Tree Maker does not connect on the Web dashboard.

  My Family Tree Maker 2009 does not connect to the Internet comes up with the message which is cannot authenticate the server, but it tells me that my version is up-to-date.  He has always worked so far? Comes with the following message if I try to do anything that involves the net.

  "Auntentication with the server failed.

  Hi HelenTL,

  You did changes to the computer before this problem?

  If you have any software security & firewall installed, disable them temporarily and check if the problem persists.

  
  Note: check to allow them back on the computer after you complete these steps.

  Hope the helps of information.
  Please post back and we do know.

• asked when selecting printer password to connect to the Web - 5530th

  "When I select ' printer connect to the Web ' the first thing I get is a problem with the sites security certificate message.  Then a message "i.e. explorer.exe 10.0.0.5 server is asking for your user name and password."  The server indicates that it is from admin. "What password he seeks.  My administrator password does not work.  Any ideas would be most appreciated Win8.1 64-bit, Toshiba laptop

  There are two ways we can know who is responsible for the error, restore the default settings of the printer network, or try a different web browser.

  It seems to me that the built-in Web server opens in Internet Explorer. In order to have the Embedded Web Sever open in another browser, you open Firefox, Google Chrome, etc. On the printer, press the wireless icon and it will show the IP address.

  In the other open browser, type printers I.P address in the address bar. It should load the page you had before with the tabs at the top. See if the password is always asked for.

  If the above fails, the menu on the front panel of the printer, press the wireless icon, and then default network. Connect the printer to your network and then try to load the built-in Web server (be it office or enter the I.P icon).

  Let me know the results.

• Server connection error:-1 there is a problem connecting to the server... hp photosmart 5510

  HP photosmart 5510 e - while a printer B111a

  Windows vista 32-bit

  connection error message-Server error:-1 there was a problem connecting to the server, press Retry or ok to continue

  No changes have been made to my operating system

  Try to add new applications with eprint center of my Compaq Presario CQ60 laptop to my HP printer. Computer tells me that the new applications are there and ready to use, but printer says 'server connection error "? I followed all the instructions to connect to the wireless router, but I'm not sure how to connect to the "Server"?

  The steps below a usually resolve the problem you are experiencing:

  1. unplug the power cord at the back of the printer.

  2. unplug the power cord at the back of your router (and the modem, if they are separated from the router).

  3. wait 20 seconds, then plug the router (and the modem, if necessary) in.

  4. wait for 30 seconds, then plug the printer back and power.

  5. press the button on the front of the printer ePrint, and it should try to connect to Web Services again.

  These steps usually fix the problem, but if it persists, you can try definition of network information static for the printer (which is sometimes useful to stabilize the ability of the printer to get outside of your network to the internet):

  1. tap the wireless at the top of the screen of the printer and note the IP address.
   
  2. Enter the IP address in the address bar of a web browser on a computer and press on enter or click the go button browser.
   
  3. the printer status page must be open.  Click network in the upper part.
   
  4. click on networking on the left.
   
  5. Select the Proxy settings.
  Note: If you are prompted for a redirect, click OK.  If you receive a certificate warning, select the option that allows you to continue anyway.
  If you receive an internal system error, refresh the page until it loads the proxy settings.
   
  6. check that all fields are empty.  If they are not, make them disappear and make sure that the Proxy Server requires authentication is unchecked and click on apply.  You should get a success message.
   
  7. click on the network address (IP) on the left.
  Note: If you only configuring IP address and DNS address with a yellow note Configuration, refresh the page until it loads completely.
   
  8. leave automatic IP IP address Configuration.
   
  9 change the DNS address to the manual DNS Server Configuration.
   
  10. enter manual for the manual preferred DNS Server 8.8.8.8 and 8.8.4.4 for auxiliary DNS.
   
  11. click Apply and you should get a success message.
   
  12. turn off the printer for 30 seconds and then turn it on again to force the new settings take effect.

  Let me know if you have any additional questions. Thank you!

• I can\ to connect to the web server integrated on my D7460?

  Hello

  I had some problems with my Photosmart D7460 printer and resolved (for now) most of them.

  Except that I can't connect to the built-in web server. Also, I do not get a response when I try and ping the printer.

  Giving to think I have problems of network with the exception that I can print to this printer... Well well, from most of the computers on the network, but that's another story.

  I checked what the said road IP address he gave to the printer.

  Any suggestions would be welcome.

  OK, I seem to have solved the problem.

  I'm not sure that bit of material, it was causing the problem but it seems to come form tries to use "WPA & WPA2" parameters (BT Home Hub 3.0) wireless access point.

  Who having spent 'WPA only' I can now ping, print and connect to the web server.

• mylaptop stops as soon as I connect to the web

  I noticed that my laptop starting and wondered why it was closed. I waited for windows load, signed at and shortly after he began to close again. After an investigation, I noticed that it happens when it connects to the web.lan or wifi have the same results.if that I disable my sound connections fine until I try to connect then it stops and restarts. It's the same thing in safe mode. I did a factory reinstall but nothing seems to help.any ideas?

  Hello

  According to the description, it seems that you are facing problems with the Internet connection, the computer automatically shuts. I'll be happy to help you in this problem.

  -Type of connection that you are using? (Wired or wireless)

  -Did you do changes on the computer before this problem?

  Method 1: I suggest you to follow the steps from the link and check if the problem persists.

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-za/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 2: If the problem persists, I recommend the steps and check if that helps.

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-za/Windows7/fix-network-adapter-problems

  For reference:

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-za/Windows7/wireless-networking-frequently-asked-questions

  I hope this helps.