Problem installing RAM

Similar Questions

• TouchSmart 310-1125f: problems of RAM with Touchsmart 310-1125f

  I'm having a time heckuva upgrading RAM on this machine. To start, I tried an upgrade of RAM several months to a year. I went to the product page HP customer care to find out what kind of RAM I needed, and how much has been. It does not appear that the RAM on the product page info is correct, because I ordered what I thought, it was EXACTLY what I need and when it arrived and I took the machine part to install the RAM, I discovered that there was NO WAY that I bought was going to adapt. Product page indicates the installed a PC3-10600 DDR3-1333 RAM machine. What I bought was the Office of PC3-10600 DDR3 - 1333 mhz 240 pin DIMM RAM. It seems the rub is Office RAM laptop RAM vs. HP's product page does not specify the Touchsmart 310 uses laptop RAM, or at least what I think is laptop RAM. The installed RAM is small (SODIMM?) where the RAM I bought to upgrade is great "stick" RAM. The RAM that is currently installed in the machine has a sticker that reads "1RX8 PC3 - 10600S - 9 - 10 - B1. I just need to know without a doubt what to buy to upgrade RAM, because the machines performance is poor, return of points of sale by correspondence are a chore, and I don't necessarily like tearing apart my computer mainly for no reason. To add insult to injury, after I realized the mailorder RAM did not adapt, I handed the computer together without writing the specifications for the RAM installed to try to resolve the dilemma, so I had to tear the machine today (and put back together) just to get the RAM specifications. Thanks in advance for anyones insight!

  The specifications of your system indicate the following.

  

  If you found my answer helpful please say thank you by clicking on the icon of the thumb.
  If my answer has solved your problem, please mark it as accepted Solution. Thank you!

• HP p6245d gives error beeps after installing RAM

  My HP Pavilion p6245d desktop computer that has a motherboard of Foxconn H-I41-Μatx gives an error beep code of a short and a long beep after that I installed a 2 GB 1333 MHz DDR3 DIMM on it. The code of the RAM is KVR1333D3S8N9 / 2G, manufactured by Kingston. My system has a 2 GB installed RAM origin, but I would like to install an another 2 GB as it says that the motherboard can support up to 4 GB of RAM. I tried to clean the slots, reseatting RAM, reset the CMOS, etc., but not from their work. I also checked through the internet and I found out there a lot of people have the same problem. Hope someone can help on this issue. Thank you!

  P/S: Operating system is Windows 7 Ultimate 32 bit.

  Hello..
  I would like to ask you something.
  
  The motherboard gives you a beep sounds when the original RAM is installed on the other slot?
  
  If your answer is Yes, then the slot is faulty.
  
  It has only two instances when your PC gives you a beep sounds when the memory stick is plugged.
  
  1. when the memory stick (live RAM) is defective.
  2. his slot memory on the motherboard that is defective.
  
  Find a stick of memory work on all locations on the motherboard. And mark that on which working memory is to give tone to the PC.
  
  It would prove the functionality of your memory locations.
  
  If you have any other questions or if this does not correct the problem, ANSWER.

• computer laptop dv6-612tx of hppavilion: size of the installed ram

  I am Agnes... .i am using a computer hp pavilion dv6-612tx laptop... I have a size of ram of 4 GB of origin with the product... but today, recently I gave the lappy to a store aimed a cleaning after I got my lappy when I see the system information in my computer that I could see that the installed ram is 2.45 only...? My question is will show 4 GB ram ram of 4 GB installed or 2.45 only? Please tell me quickly

  Hello @Hemanth17,

  Welcome to the HP Forums!

  I read your post about the size of the memory installed showing incorrectly on your dv6612tx Pavilion laptop and wanted to reach out to you.

  At the right amount showing before you had the system cleaned? What's the memory installed value that is incorrect or available memory?

  If the system displays 4GB but 2.54 GB usable, the system recognizes that the memory is installed, but retains little memory for the physical operations.

  It is possible that the maximum memory is enabled. To change this, you need to go into the System Setup and check the Advanced tab startup options.

  You can also try the tests for a hardware problem or remove and reinstall the memory using the procedure described in the Service Manual (page 53) If you feel that there is a problem of physics with the memory.

  Please let me know how it goes. If this helps you to find a solution, please click on the button accept as Solution down below in this message.

  Thank you!

• Installed RAM 16 GB, only 4 GB in BIOS - Precision T5400

  Hi all

  I'm at the end of the roll, trying to make the best of my memory upgrade.

  I am running Windows7 64-bit on Dell Precision T5400 single quad-core Intel Xeon E5405. Card mother 0RW203. BIOS version A11

  Has obtained eight identical sticks of 2 GB of ram (for a total of 16GB) and installed on all the places available. Noticed on the properties of Windows - installed RAM 16 GB (4 GB usable). Tried to play with the allocations of virtual memory, but without success.

  BIOS enabled and it showed all 8 locations occupied with 2 GB of ram, but the installed memory is 4 GB. Don't see any options for tweaking the settings of the BIOS for it to recognize all of the 16 GB of ram.

  Checked each stick individually and all play nice and the CPU - Z reports installed as well, removing the issue of housing or the motherboard. I suspect that it is a BIOS problem, and I would be grateful to anyone who can suggest a solution.

  I'll be happy to provide the additional information requested. I inherited the machine, so RMA and returns are out of the question.

  Ok

  Here is a temporary workaround

  on my example

  Initially, I had installed 4 GB / 4x1Go in slots 1-4 (white)

  I wanted to move to 16GB / 8x2Go

  And obviously had a same problem as the topic starter

  But I managed to work the memory following the path:

  1. Install memory old back and let the bios not recognize
  2. restart and shut down pc
  3. install the new memory (16 GB / 8X2Go)
  4. After turning on, you will see the message "memory size has changed.
  5. strike the F1 to continue and just forget about the existance of the BIOS, because as soon as you go, chances are that your memory will be reduced

  Clearly, this is a bug in the BIOS.

  I use A11.

  For DELL it would be really good remedy finally

• Problem installing Windows XP Mode in 7 Winjdows

  I have a problem installing Windows XP Mode in Windows 7 Pro 64 running on a Dell Latitude E6510 laptop with an i5 processor and 8 GB of ram.  This machine supports hardware virtualization, and it is enabled in the BIOS.

  Before downloading software in XP Mode, the MS download required Windows validation Web site.  Downloaded and reported validation validation and a successful installation.  Then I downloaded Windows XP Mode (WindowsXPMode_en - us.exe, 481 052 KB) installation package and the package of Windows Virtual PC (Windows6 1 - KB958559 - x 64 - RefreshPkg.msu, 16 692-Ko).  Then, I installed Windows XP Mode; the installation ran without any problems apparent and reported success.
  According to the docs of download site, the next step is to: "... click on the Windows 7 start button , and then select all programs > Windows Virtual PC > Windows XP Mode to begin the installation."
  My problem is Windows Virtual PC does not appear anywhere in the selection of all programs list - believe me, I looked.  There is, however, a new directory called
  c:\ProgramFiles\Windows XP Mode\
  but it contains no exe file.  It contains a file of 1.2 GB called Windows XP Mode base.vhd - but it is not clear what to do with it.  There is also a tutorial subdirectory.
  I tried to reinstall Windows XP Mode (without uninstalling first) but I just get a warning message that the program is already installed.  Windows XP Mode appears on the list "Uninstall or change a program" in the module programs and features in Control Panel.
  I tried running (Windows6. 1-KB958559-x64-RefreshPkg.msu(Windows6.1-KB958559-x64-RefreshPkg.msu, goal that throws error 0x8007000d, "The data is invalid."
  If at this point, my question is simple, "what to try next?
  Thanks in advance.

  The right way to install Windows XP Mode, you must first install Windows Virtual PC, and then install Windows XP Mode.

  You must install both files:

  1 Windows6. 1 - KB958559 - x 64 or x 86 architecture that you run

  Restart the system, and then install:

  2 WindowsXPMode_en-we

  ------------

  Uninstall Windows XP Mode:

  Click Start, type: programs and features

  Press enter on your keyboard

  Scroll down

  Select Windows XP Mode

  Click Change/uninstall in the command bar

  Uninstall Windows XP Mode

  -----------------

  Restart your computer

  Proceed with the installation of Windows XP Mode in the right order.

  --------------

  If it does not always show upward:

  Click Start, type: enable or disable windows features

  Scroll down

  Make sure that Windows Virtual PC is checked

  Click OK

  Reboot if prompted

  -------------------

  http://www.notebooks.com/2009/11/23/using-Windows-Virtual-PC-with-Windows-XP-mode/

• problem installing windows 7 finishing installation scope and freeze for hours please help

  problem installing windows 7 finishing installation scope and freeze for hours please help

  my pc req:
  2 GB of ram
  NVIDIA geforce 210 1 GB
  180 GB
  Pentium 4 3.40
  Help, please

  Turn off the computer.

  try to start safe mode, start your PC, just before the system loads the Windows operating system. Press the [F8] key function 8 on your keyboard which will launch the menu Advanced Boot Options. Select Safe Mode.

  Log, click Start, type Device Manager, press ENTER.

  Expand graphics cards

  Right-click your video card, click on uninstall.

  Restart your system

  Log, click Start, type Device Manager, press ENTER.

  Expand graphics cards
  Right-click your video card

  Driver update software; then click search automatically for updated driver.

• Problem installing Lightroom4

  I'm having a problem install lightroom on my office 4. I get an error message "windows service install could not be accessed. This can happen if windows install is not installed correctle. Please contact support for assistance staff' I am running Vista Home premium 64-bit SP2, Intel core quad processor 8300 2.5 GHz, 6 GB Ram., with 354 GB of free space on the hard disk. Currently I have Photoshop CS4 installed as well as several other programs such as Topaz, and Photomatix Pro. I have no idea how to solve this problem.

  Finally! Lightroom 4 is underway! I can't say exactly what the fix was, as I cleaned my office, remove unused files, defragment the hard drive then ran Speedy PC Pro (twice), restarted again! Then I tried another installation of a Java update which installed (had the same problem with it) so I made another attempt with Lightroom 4 and it worked too.

• Problem installing device a1530n

  Running Win XP Media Center Edition.  Had minor graphical problems at the top of the IE bar periodically endangered.  Decided to remove the Intel (r) 82945G Express Chipset adapter in Device Manager and then do a scan for new hardware.  And now I get the message of the new hardware detected that says.

  Cannot install this hardware

  There was a problem installing this hardware:

  Intel (r) 82945G Express Chipset Family

  An error occurred during the installation of the device

  Access is denied.

  I am connected to the computer as an administrator.  I tried to install this even in safe mode and get the same error above.  Any clues on what do I do?  The computer runs only in VGA mode.

  Thanks in advance.

  Link to screen shot of the error message.

• Satellite P300-133 - problem installing Win Xp

  Hello

  I have a problem installing win xp to Satellite p300-133.
  To resolve this problem, I have tried the solutions:
  switch to ahci mode in bios and incorporating storage drivers compatibility intel to the installation cd xp with nlite, but none of them solved the problem.

  Laptop computer starts from the cd of xp and xp installation says "program Setup inspects your hardware configuration" and then a blank black screen comes.
  After that, the installation does nothing and waits indefinitely.

  Any ideas on this problem? Thank you.

  Hello

  > switch to compatibility ahci mode in the bios and the integration of the storage drivers Intel to xp with nlite installation cd, but none of them solved the problem.

  The two methods are good!
  You can install the Win XP without drivers Intel Storage Manager (SATA drivers) but in this case the SATA mode must be on compatible mode.
  It works for sure!

  The second method is the installation of the SATA drivers with nLite (drivers can be integrated into the new drive Win XP).

  I put t understand why this doesn t work on your laptop. I think it's a problem with your Win XP drive. Contains this Win XP SP2 or SP3?
  If this isn't the case, then you should use nLite to include min the Win XP SP2.

  Check it!

• Problem installing PCI-6220

  Hello

  I have problems installing a PCI-6220. The card has been installed a couple of years on a PC and rarely used. I withdrew from the it and connected to a new PC (Intel core i3 2.93 GHz, Windows7). After installing the card on the new PC in a first time, I could read the name of PCI6220 under 'Devices and interfaces' (in the program MAX) but I´d not been able to define it as a device. So I tried to remove the card and plug it in again and now the situation is even worse, I only see an "unidentified PXI system" in the program of MAX.

  Any idea what bad and what can do to make sure that the card does not work properly? As a reference, I need to connect to a CA-1000 enclosure housing a CB-68LPR device.

  Thanks in advance,

  G.

  Install the latest (9.3) DAQmx-drivers for your PCI, which could help.

  http://Joule.NI.com/nidu/CDs/view/p/ID/2337

• Problem installing LAN USB adapter in a new copy of windows 2000

  After having reformatted my hard drive and install a new copy of window 2000, I'm having a problem installing device drivers.  When I enter the correct inf file path, it reports that this window has not found a driver for the device.  Whithout the possibility to connect to internet, I have exhausted all my options and still need to install several other drivers with the same problem.  help help help help

  Everything you try to use (you do not give the brand / model of the LAN USB adapter) made drivers for Windows 2000?

• Pre-installed RAM in a R60

  I bought my R60 about two years, with 1 GB of pre-installed RAM. Is there a way to check how much RAM is in each Bay without opening the device? (i.e. 512MBx2, one in each 1 GB, with an open Bay or Bay;)

  Well, you really don't fix the RAM sticks... just replace them.

  Even though I already know that some people would disagree... but that's how this issue is treated in most cases.

  I hope this helps.

• Problem installing Webroot for MSN (part of the Internet software of MSN Premium subscription) "error 5: access is denied" and "Setup could not create the directory"C:; Program Files/Webroot/security /...

  Original title: problem installing Webroot for MSN (part of the Internet software of MSN Premium subscription)

  Try installing Webroot to MSN but when I run the installer, I get "error 5: access is denied" and "Setup could not create the directory"C:; Program Files/Webroot/security/current/plugins/antimalware/Backup ". OS is XP with Service Pack 3. I tried to delete my existing Webroot program and turning to the bottom/off other security options... Any suggestions? Thank you.

  Thanks for the reply. I was able to finally get the new Webroot program to install after running a Microsoft Fix affecting the directory uninstall the old prgm Webroot and meets a new error code (1603), which led me to this site to permissions Grant full control to the SYSTEM account.

  http://support.Microsoft.com/kb/834484

• IPod Classic 7 G 160 GB ' there was a problem installing this hardware: Apple iPod USB Device ".

  I have recently (June 2014) bought a brand new Ipod Classic 7 G 160 GB Model A1238.

  Whenever I connect via USB to a PC running XP SP3 and Itunes V10.0.7.2 it is always treated as if it were a new connection, i.e. "new hardware found". After trying to install it, it says so "cannot install this hardware" and "there was a problem installing this hardware: Apple iPod USB Device."
  I have also a 2009 16 GB Ipod Nano 4 G model 1285 and this is recognized by the PC whenever it is connected through the USB port itself.
  I connected the Ipod Classic 7 G to a laptop running Vista and Itunes V10.0.7.2 where the Ipod is recognized and installed.

  Even if the PC States that there is a problem installing the Ipod, it still appears in Itunes and I can download music to it and disconnect by using safe mode disconnect.

  PC XP SP3 - Ipod Classic
  I watched "Device Manager" under "Drives", the Ipod Classic is listed as an "Apple Ipod USB Device", but has an exclanation score against it.

  Right-click on the 'Apple Ipod USB Device' properties and the "Volumes" tab it shows the drive with the exact name and the size of the data, by clicking on the properties of "Driver" tab it says 'Unknown' driver provider, driver Date and Driver Version as being "not available". By clicking on the "Driver Details" properties, it shows a driver file-

  C:\WINDOWS\system32\drivers\PartMgr.sys, File Version 5.1.2600.5512 (xpsp080413-2108).

  Under "Device Manager" USB controllers, there is an entry for "Apple Mobile Devices USB Driver" and a "USb Mass Storage Device"

  The 'Apple Mobile Devices USB Driver' lists two drivers:
  C:\WINDOWS\System32\Drivers\usbaapl.sys and
  C:\WINDOWS\System32\usbaaplrc.sys

  The "USB Mass Storage Device" list a driver:
  C:\WINDOWS\System32\Drivers\USBSTOR. SYS

  PC XP SP3 - Ipod Nano

  I repeated the steps above with the Ipod Nano, connected to the PC and the driver provider is presented as Microsoft with the driver as 07/01/01 Date and Version of the driver as 5.1.2535.0.
  In the "Driver Details" properties, it shows TWO driver files:

  C:\WINDOWS\system32\DRIVERS\disk.sys AND meanings
  C:\WINDOWS\system32\drivers\PartMgr.sys.
  At the same time with the Version of the file 5.1.2600.5512 (xpsp080413-2108).

  The 'Apple Mobile Devices USB Driver' and "USB Mass Storage Device" are the same as for the Ipod Classic.

  I followed the procedure to remove Itunes and even the update to Itunes to V11.2.2 nothing works.

  I am aware that the system is also that XP can now be updated.

  So, why not not Windows Installer Ipod Classic and why the disk.sys driver does not appear

  According to the details of the pilot?

  Is the 7 G Ipod Classic not compatible with XP SP3?

  Yes it is compatible with XP SP3.

  Try asking in the forums of Apple iPod:

  https://discussions.Apple.com/community/iPod/ipod_classic?CategoryID=204