Problem installing XP in Virtualbox VM on my Mac

Similar Questions

• I have problems installing Creative Suite 3 for my new Mac

  I buy Creative suite 3 for my iMac a few years ago and recently installed a new hard drive for my computer. Old contents were taken from an external memory. Now I can´t use my programs (photosho etc..) What should do?

  You cannot use because you have exceeded your number of activations?  If so, contact adobe supports for reset: http://www.adobe.com/support/chat/ivrchat.html

  You cannot use because you don't have the installation files?  If so, and if you follow the 7 steps you can dl a free trial here: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

  and activate it with your serial number.

  If you have a problem dl'g, you don't follow all 7 steps.  the most common mistake is not meticulously follow the steps 1, 2, and/or 3 (which adds a cookie to your system, allowing you to download the correct version of the adobe.com site).

  Another reason?  specify.

• Problem installing camera raw update with CS6 on mac

  I'm trying to download a new camera raw plug in.  I use CS6 on two macs (one with 10.9.5 and one with 10.11.3).)  I need a plug-in that is compatible with Nikon D4s.  I downloaded 9.1 and installed but when I reopen it photoshop (even after rebooting), the 7.1 still appears.  How he do it in Photoshop?  Please notify.  Thank you!

  Hi carlisles.

  You can check the link and try to download the Camera Raw for Photoshop CS6 9.1.1 plugin. Installer Camera Raw Adobe Photoshop CC and CS6

  Also try an update the Photoshop CS6 was last updated. Adobe - Photoshop: for Macintosh: Adobe Photoshop 13.0.6 updated for CS6

  Let us know if that helps.

  Kind regards

  Mohit

• Problem installing Adobe Acrobat Pro DC on my mac

  I downloaded the trial version of Adobe Acrobat Pro DC 30 days, but when I go on install only goes about halfway through and then I get an error message: "error encountered. " Installer Acrobat encountered an unexpected failure. Please try again. If it continues to fail, contact Adobe technical support. »

  I restarted the computer and tried several times - still no luck. Since there is apparently no way to actually talk to Support Adobe, I'm here.

  I hope someone can help! I want to buy it if it meets my needs.

  I'm at the Mexico - don't know if that makes a difference.

  Thank you!

  Sarah

  Acrobat DC requires either Mac OS 10.9.x or 10.10.x.

  This is why it is not and can not install.

  -Dov

• Problem installing Adobe first 10 on a new Mac Pro

  Following error occurred

  can someone help

  Exit code: 7

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 8 (s), 7 warning (s)

  WARNING: DW031: payload: camera profiles Installer 6.0.0.0 {3F023875-4A52-4605-9DB6-A88D4A813E8D} has been updated and has been selected for repair. The patch {FEA75AFB-4905-43BB-B1D5-5B44D681BFE7} Installer_6.4_AdobeCameraRawProfile6.0All camera profiles 6.4.0.0 are uninstalled now.

  WARNING: DW031: payload: camera profiles Installer 6.0.0.0 {3F023875-4A52-4605-9DB6-A88D4A813E8D} has been updated and has been selected for repair. The patch {FEA75AFB-4905-43BB-B1D5-5B44D681BFE7} Installer_6.4_AdobeCameraRawProfile6.0All camera profiles 6.4.0.0 are uninstalled now.

  -Payload: {68FE2517-2E45-4B03-8241-D0634F43878B} Smartsound1 1.0.0.0.

  ERROR: DW006: Apple package cannot be installed successfully.

  WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

  WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

  WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

  WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

  WARNING: DW036: payload cannot be installed due to the failure of the operation dependent

  ERROR: DW050: the following payload errors were found during the installation:

  ERROR: DW050:-Smartsound3: installation failed

  ERROR: DW050:-Photoshop Camera Raw for 10 elements: installation failed

  ERROR: DW050:-Smartsound1: installation failed

  ERROR: DW050:-Adobe Premiere Elements 10: due to a lack of Language Pack installation

  ERROR: DW050:-Adobe Premiere Elements 10_LangPacken_US: installation failed

  ERROR: DW050:-Smartsound2: installation failed

  -------------------------------------------------------------------------------------

  http://helpx.Adobe.com/premiere-elements/KB/updated-installation-instructions-premiere-ele ments.html

• Problems installing adobe CS6 Design Standard on the MAC 10.9.5 system

  I had to interrupt the installation process and power the computer off, because my screen freezes. Now, I can't reinstall cs6 or uninstall the program. The cleaning of cc Adobe tool can't find any product to clean. Who can help?

  Download the installer from the link below cs6:

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.4| 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• Problem installing device a1530n

  Running Win XP Media Center Edition.  Had minor graphical problems at the top of the IE bar periodically endangered.  Decided to remove the Intel (r) 82945G Express Chipset adapter in Device Manager and then do a scan for new hardware.  And now I get the message of the new hardware detected that says.

  Cannot install this hardware

  There was a problem installing this hardware:

  Intel (r) 82945G Express Chipset Family

  An error occurred during the installation of the device

  Access is denied.

  I am connected to the computer as an administrator.  I tried to install this even in safe mode and get the same error above.  Any clues on what do I do?  The computer runs only in VGA mode.

  Thanks in advance.

  Link to screen shot of the error message.

• Satellite P300-133 - problem installing Win Xp

  Hello

  I have a problem installing win xp to Satellite p300-133.
  To resolve this problem, I have tried the solutions:
  switch to ahci mode in bios and incorporating storage drivers compatibility intel to the installation cd xp with nlite, but none of them solved the problem.

  Laptop computer starts from the cd of xp and xp installation says "program Setup inspects your hardware configuration" and then a blank black screen comes.
  After that, the installation does nothing and waits indefinitely.

  Any ideas on this problem? Thank you.

  Hello

  > switch to compatibility ahci mode in the bios and the integration of the storage drivers Intel to xp with nlite installation cd, but none of them solved the problem.

  The two methods are good!
  You can install the Win XP without drivers Intel Storage Manager (SATA drivers) but in this case the SATA mode must be on compatible mode.
  It works for sure!

  The second method is the installation of the SATA drivers with nLite (drivers can be integrated into the new drive Win XP).

  I put t understand why this doesn t work on your laptop. I think it's a problem with your Win XP drive. Contains this Win XP SP2 or SP3?
  If this isn't the case, then you should use nLite to include min the Win XP SP2.

  Check it!

• Problem installing PCI-6220

  Hello

  I have problems installing a PCI-6220. The card has been installed a couple of years on a PC and rarely used. I withdrew from the it and connected to a new PC (Intel core i3 2.93 GHz, Windows7). After installing the card on the new PC in a first time, I could read the name of PCI6220 under 'Devices and interfaces' (in the program MAX) but I´d not been able to define it as a device. So I tried to remove the card and plug it in again and now the situation is even worse, I only see an "unidentified PXI system" in the program of MAX.

  Any idea what bad and what can do to make sure that the card does not work properly? As a reference, I need to connect to a CA-1000 enclosure housing a CB-68LPR device.

  Thanks in advance,

  G.

  Install the latest (9.3) DAQmx-drivers for your PCI, which could help.

  http://Joule.NI.com/nidu/CDs/view/p/ID/2337

• Problem installing LAN USB adapter in a new copy of windows 2000

  After having reformatted my hard drive and install a new copy of window 2000, I'm having a problem installing device drivers.  When I enter the correct inf file path, it reports that this window has not found a driver for the device.  Whithout the possibility to connect to internet, I have exhausted all my options and still need to install several other drivers with the same problem.  help help help help

  Everything you try to use (you do not give the brand / model of the LAN USB adapter) made drivers for Windows 2000?

• Re-not installed XP in VirtualBox - no activation

  A few months ago, I installed XP in VirtualBox, in order to access certain documents of Lotus's SmartSuite.  Everything was going fine until I had a catastrophic situation when Windows Update failed, and no so the restoration, which requires a refresh.  Now, I reinstalled VirtualBox and XP, but I can not connect because my activation key (exactly the one that previously worked) is no longer accepted.

  I'm running Windows 8.1 and also have a Windows 7 installation.  I need to identify the best way to get these files.  I prefer the VirtualBox solution, but will accept any other way course.

  Any suggestions gratefully received.

  Anne

  If it (Lotus) installs on Windows XP & Windows 7 I see not why do not install on Windows 8, install it in compatibility mode.  To install in compatibility mode right click on the installer and select 'Properties' then click the 'Compatibility' tab and check "run this program in compatibility mode for:." in the drop-down list, select the version of Windows for your version of Lotus Smart Suite.   Once installed, you can also do the same to run the program in compatibility mode, or you can create a shortcut for the program and set the compatibility mode in the shortcut itself.

  John

• Problem installing Webroot for MSN (part of the Internet software of MSN Premium subscription) "error 5: access is denied" and "Setup could not create the directory"C:; Program Files/Webroot/security /...

  Original title: problem installing Webroot for MSN (part of the Internet software of MSN Premium subscription)

  Try installing Webroot to MSN but when I run the installer, I get "error 5: access is denied" and "Setup could not create the directory"C:; Program Files/Webroot/security/current/plugins/antimalware/Backup ". OS is XP with Service Pack 3. I tried to delete my existing Webroot program and turning to the bottom/off other security options... Any suggestions? Thank you.

  Thanks for the reply. I was able to finally get the new Webroot program to install after running a Microsoft Fix affecting the directory uninstall the old prgm Webroot and meets a new error code (1603), which led me to this site to permissions Grant full control to the SYSTEM account.

  http://support.Microsoft.com/kb/834484

• IPod Classic 7 G 160 GB ' there was a problem installing this hardware: Apple iPod USB Device ".

  I have recently (June 2014) bought a brand new Ipod Classic 7 G 160 GB Model A1238.

  Whenever I connect via USB to a PC running XP SP3 and Itunes V10.0.7.2 it is always treated as if it were a new connection, i.e. "new hardware found". After trying to install it, it says so "cannot install this hardware" and "there was a problem installing this hardware: Apple iPod USB Device."
  I have also a 2009 16 GB Ipod Nano 4 G model 1285 and this is recognized by the PC whenever it is connected through the USB port itself.
  I connected the Ipod Classic 7 G to a laptop running Vista and Itunes V10.0.7.2 where the Ipod is recognized and installed.

  Even if the PC States that there is a problem installing the Ipod, it still appears in Itunes and I can download music to it and disconnect by using safe mode disconnect.

  PC XP SP3 - Ipod Classic
  I watched "Device Manager" under "Drives", the Ipod Classic is listed as an "Apple Ipod USB Device", but has an exclanation score against it.

  Right-click on the 'Apple Ipod USB Device' properties and the "Volumes" tab it shows the drive with the exact name and the size of the data, by clicking on the properties of "Driver" tab it says 'Unknown' driver provider, driver Date and Driver Version as being "not available". By clicking on the "Driver Details" properties, it shows a driver file-

  C:\WINDOWS\system32\drivers\PartMgr.sys, File Version 5.1.2600.5512 (xpsp080413-2108).

  Under "Device Manager" USB controllers, there is an entry for "Apple Mobile Devices USB Driver" and a "USb Mass Storage Device"

  The 'Apple Mobile Devices USB Driver' lists two drivers:
  C:\WINDOWS\System32\Drivers\usbaapl.sys and
  C:\WINDOWS\System32\usbaaplrc.sys

  The "USB Mass Storage Device" list a driver:
  C:\WINDOWS\System32\Drivers\USBSTOR. SYS

  PC XP SP3 - Ipod Nano

  I repeated the steps above with the Ipod Nano, connected to the PC and the driver provider is presented as Microsoft with the driver as 07/01/01 Date and Version of the driver as 5.1.2535.0.
  In the "Driver Details" properties, it shows TWO driver files:

  C:\WINDOWS\system32\DRIVERS\disk.sys AND meanings
  C:\WINDOWS\system32\drivers\PartMgr.sys.
  At the same time with the Version of the file 5.1.2600.5512 (xpsp080413-2108).

  The 'Apple Mobile Devices USB Driver' and "USB Mass Storage Device" are the same as for the Ipod Classic.

  I followed the procedure to remove Itunes and even the update to Itunes to V11.2.2 nothing works.

  I am aware that the system is also that XP can now be updated.

  So, why not not Windows Installer Ipod Classic and why the disk.sys driver does not appear

  According to the details of the pilot?

  Is the 7 G Ipod Classic not compatible with XP SP3?

  Yes it is compatible with XP SP3.

  Try asking in the forums of Apple iPod:

  https://discussions.Apple.com/community/iPod/ipod_classic?CategoryID=204

• Problem installing disktop 800 wireless drivers for windows xp

  Problem installing disktop 800 wireless drivers for windows xp

  Hi Samir,

  I see that you are unable to install the drivers disktop 800 wireless. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  3. have you made changes on the computer recently?

  4. What is the error you get when trying to install the driver?

  Please provide us with more information to continue troubleshooting as a result.

  See the link on how to ask questions or help on the Forums.

  Suggestions for a question on help forums: http://support.microsoft.com/kb/555375

  Refer.

  Wireless and wired network problems: http://windows.microsoft.com/en-US/windows/network-connection-problem-help#network-problems=windows-xp&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• When you try to install the HP Laserjet 1300 printer error there is a problem installing this hardware.

  Original title: HP Laserjet 1300 Windows XP, SP3 error installation

  When you try to install the HP Laserjet 1300 printer, I get the following error message and the process stops and restores.

  CANNOT INSTALL THIS HARDWARE

  There was a problem installing this hardware

  HP Laserjet 1300 PCL 6

  An error occurred during the installation of the device.

  The specified Module could not be found.

  I have used the original printer installation cd, bought a new cd from HP and downloaded the drivers directly from the HP Web site and I get the same error.  The record show error install printer on each attempt of events. Can anyone help?  Thank you

  Hello

  You are able to install other programs?

   

  Method 1: See the following article:

   

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02073861&LC=en&cc=us&product=3795406

   

  Method 2: view the following steps and see if that helps.

  (a) disconnect the printer

  (b) uninstall the software and drivers on the computer

  (c) plug the printer back

  (d) allow the Hardware Wizard search for drivers

  e) if it does not, it asks you to install the source for the drivers, the installation driver CD and install the drivers and see if that helps.