Problem of equalizer after update of lollipop

Similar Questions

• No sound during voice call after update of lollipop

  Hello

  I am facing very strange problem after update of lollipop. Before the update, it was working fine, but after installing Lollipop, I can not get audio during call voicemail if call sound incoming or outgoing. Although restarting solves the problem, but only temporary, and the problem is back again after some use. Is there a permanent solution?

  Thanks in advance.

  If a reboot solves, it is software partner. Maybe an application.

  I would like to reset the phone, do not restore all applications, and then test again for awhile.

• seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

  seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

  The 'list' of relevant articles that I know, they are now

  -You can read about the problems in the present statutes and possibly find workaround solutions, particularly in the last

  If you are unable to activate your iPhone, iPad or iPod touch after installing an update - Apple Support

  Apple iOS suspension 9.3 updates for older devices, work on activation fix | IVous

  Apple launches new version of iOS for iPad users 9.3 2 affected by bricking bug | 9to5Mac

  GSM of unfixed addresses Apple iPad 2 Bug with revised Activation iOS 9.3, but the larger question remains - Mac rumors

  If you are unable to activate your iPad 2 (GSM model) update to iOS 9.3 - Apple Support

  9.3 iOS update issues

  Leave a post by: ChitlinsCC

• WiFi problem after update of lollipop

  Is anyone having problems with their wifi connection after updating to the pacifier. Mine was working fine before the update. A move 35mbps ookla speed test download when connected to my home fibre broadband before the update, but now even hit 1mbps after update. Keep buffering when watching videos. Home broadband Checked speed on pc and getting 34mbps so it's not my Internet problem. Would appreciate ideas. Thanks.Using xperia D6603 z3.

  That's what I'll do, fix the phone with PCC

  PC Companion (CCP)

  Bridge (for Mac)

  Alternatives on how to backup Xperias

  http://talk.sonymobile.com/thread/36355

  and uninstall any antivirus > check again.

• black screen empty after update of lollipop!

  My phone is: Z3 Compact Xperia

  After updating my phone from 4.4.4 android. Lollipop 5.0.2 I get a blank black screen of House, and I can't access anything in the phone except notifications and settings when scrolling from top.
  The 3 buttons below are there but do not work.

  This happens randomly about 2 - 3 times daily for no specific reason and the only way to fix it is to reboot the phone by the power button, otherwise the update is great and everything works fine.

  Someone knows how to fix this please?

  Hello guys,.

  In fact, I did not apply the solution that I got scared to lose my data if I did.

  But I noticed that this happens generally when I connect to wifi bluetooth or at home of my car... so I tried the apps no matter what behavior related to connecting to wireless networks and or has been disabled the uninstalled, and re-installed them.

  Guess what... It works beautifully!

  applications that have been the cause of the problem:

  1. smart app lock (it was disabling the lock automatically when I connect to bluetooth auto)

  2. a built-in feature in the software, which is turn off wifi when I leave the House enabled by GPS I think.

  but I have still some errors during calls, including why I could reconsider the system repair and can report this problem in an independent post.

  I hope that could help someone...

  See you soon,.

• Some problems of AppStore after update of the Sierra

  Hi, after update my Mac to Sierra, there are a few problems of the AppStore:

  1. The Pages app updated to v6 and numbers to v4, Keynote, but fails to Update v5 (iWork ' 09)
  2. I've been on the program of public beta for Sierra but have now updated to the release version, but the app store is still trying to download the last Beta of Sierra. I disconnected (e) into the beta program website
  3. The AppStore download iPhoto but the app shows the icon of the incompatible (white circle with bar diagonally) in the Application folder - how to uninstall it?
  4. Is does not work available on the AppStore - the previous Terminal command Debug menu for access to this

  Thank you

  Hello

  Safe Mode boot removes the system caches that can you help an update or upgrade.

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

• Problems with scrolling after update

  IM currently using the BlueJ ide and after updating to the new system / update (macOS Sierra) there is significant lag / jitter when scrolling. This problem only occurs when you use the scrolling with two fingers with the touch pad. When I use a mouse / or click the scroll bar on the side, it seems to go well. Not sure if there is a problem with BlueJ or the new OS. Would be very interested for some suggestions on how to fix this very annoying problem. (Using a Macbook pro 13, 2015).

  Thanks a lot to all the answers

  The obvious question would be if you see the problem of scrolling in Mac OS standard applications such as Mail, Notes and Safari.

  If this isn't the case, it is likely BlueJ.

• Problem with Safari, after update

  I use a MacBook Pro, OS X Yosemite, 10.10.5 - and after the last update, I have problems with Safari (version 9.1). Some Web pages I visit every day is more responsible (I get the message that the page needs to be recharged because she failed the first time, but this does not work then either). This problem started just after the last update. Does anyone else have this problem? What I have to go back to the previous version or can I fix this problem?

  If you have problems to open Web pages, take a look at these techniques proposed by Apple of troubleshooting.

  https://support.Apple.com/en-us/HT204098

  Go to the Safari menu (at the top right of your screen next to the Apple icon), choose 'Quit Safari'

  Press the "Shift" key and while holding this button on your unique keyboard, click the icon of Safari on your Dock.

  Open Safari - Preferences - Privacy - data to remove any Web site.

  Open the menu to go with the Option (Alt) key - library - key locate Safari folder and place it on your desktop. Restart your Mac, open Safari and delete the file from your desktop.

  Also, try the following steps:

  Restart your Mac.

  Try to start:

  -Stop your Mac

  -Wait until your computer turns off and after that press the power button

  -Just after you hear the startup tone, press in and hold the SHIFT key

  -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

  -Once your Mac boot, restart dhcpd as you usually do.

  If this does not help, follow the instructions below:

  -Stop your Mac

  -Wait until your computer turns off and after that press the power button

  -Just after you hear the startup tone, press in and hold the SHIFT key

  -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

  -Once you see office, start a scan Disk Utility to detect and repair file system errors (remember to choose your primary hard drive)

  -Click on the disc to check, then, if requested to solve the problems on the repair disk

  -After that click on verify disk permissions, and then click Repair disk permissions

  -Once the process is complete, stop your Mac and turn it on again after 30 seconds

  I hope this helps!

• HP laptop - 15-r150nm: problem with wifi after update realtek adapter

  Hello! I've updated some drivers of HP customer service and then restarted computer. When it is on I couldn't use wifi. When I select the problems, it says: 1) "" Realtek 802.11B/G/N WIFI adapter RTL8723BE has some problems to the program control or hardware. "" (it is Croatian, so I tried to translate it for you)

  (2) "a network cable is not plugged in correctly or may be broken.

  What should I do, I have only this laptop and internet wifi, write this work? Thank you!

  Hi @frane53nja,

  Welcome to the HP Forums!

  This is a wonderful place to find answers and advice!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums.

  Learn how to post and more

  I understand that your laptop works OK and after updating drivers on reboot HP customer service, you have lost your wireless network. When you run the Windows troubleshooting tool, you received a message that there was a problem with the NIC due to recent hardware or software changes.

  Here is a link to HP PC - troubleshooting wireless network and Internet (Windows 8) that should help you.

  Before you perform a restore, as shown in the above troubleshooting steps, you can try this option.

  Go to the nursery of the device

  Click the network tab to expand the list.

  Right-click on the wireless network adapter and select roll back driver.

  Repeat this process for all types of adapters listed.

  While on this screen please check this definition also.

  Right click on the wireless adapter and choose Properties.

  Click the power management tab.  If "allow the computer to turn off this device to save power" is checked, please remove and click OK. Repeat this operation for all types of adapters listed.

  Please let me know the results.

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as you. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!

  To show recognition for my efforts please click the Thumbs Up below.

• Satellite A60: Problem of memory after update Bios V.1.9

  Hi all

  I've just updated my bios to version 1.9 last week. Previously, I've upgraded my RAM from 512 MB to 1.5 GB (P4 2.8 GHz., 40 GB HARD drive) and my phone worked perfectly with the old Bios and RAM. After the Bios Update to the new version, 1.9, my laptop does not accept the module of RAM upgrade, windows xp still shows the blue screen, and then restart.

  After upgrading RAM off, my laptop works again. I tried several ways to solve this problem as take the battery, then reinsert the RAM or even formatted my HARD drive and installed a new Windows XP, but it didn't work. So what can I do to make my laptop to accept the upgrade of RAM? How to solve this problem? For this reason I now intend to buy a new laptop, if the problem can not be solved since I simulate a program on this laptop, so it requires a lot of memory.

  Thank you very much in advance for your answer.

  [Edited by: admin]

  Hello

  I put t really know what is the problem with the new update of the BIOS. In my opinion, you should contact the after-sales Service of Toshiba partner in your country and explain to them the situation. If your new module memory is compatible with the unit you should tell you want to have the old version of the BIOS. As much I know as technicians for this.

  If they see that there is a problem with the BIOS update, I'm sure they will for free.

  Good luck!

• A6000 more Twitter icon disappeared after update of Lollipop

  After updating my phone crashed. He resurrected himself, when I rebooted several times. Now the Twitter icon has disappeared. I can start it by typing Twitter on Google widget, I can also launch it from Google through my Apps. How can I get the icon back? I tried to reinstall mNy times without success. Help, please.

  Note from the admin; type of phone and ROM version added to the object (assuming the others offer the correct information)

  Factory reset solved all the problems.

• Windows7 + linux mint double PC operated facing problem with windows after updating windows 7 to windows 10

  I was running the two operating system on my PC windows 7 and linux Mint. However, after update from windows 7 to windows 10 my PC can not be operated with windows. Rather when I select windows as my operating system at the start of my PC, it shows that the operating system is missing. But still I can run my PC Linus Mint. Now what should I do to recover my windows?

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you can not use Windows 10 after upgrade to Windows 7.

  It may be possible that the upgrade to Windows 10 gets no success.

  I suggest you to read the thread by Andre Da Costa MVP community moderator replied on 15 June 2015 on the same question and check if that helps.

  http://answers.Microsoft.com/en-us/Insider/wiki/insider_wintp-insider_install/how-to-upgrade-a-dual-boot-installation-of-Windows/d7ca80ce-96b0-4F0A-9A8E-4038ded592b2

  Note: Using the third-party links, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that any problems resulting from the use of third party

  Part links can be resolved. By using the links to third party is at your own risk.

  You can also check:

  http://answers.Microsoft.com/en-us/Insider/wiki/insider_wintp-insider_install/frequently-asked-questions-Windows-10/5c0b9368-a9e8-4238-B1E4-45f4b7ed2fb9

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Problem re boot after updates.

  Hi, I have a laptop HP DV6, which is about 2 months old. He originally had Vista but I bought the cause 7 upgrde, I couldn't wait any longer for the free update, I want to come. Anyway, whenever windows needs to re start after updates to the computer does not start upward. When he tries, I see the HP screen at the first start and then nothing, just a blank screen. The power light comes on but the hard drive light doesn't work. I pressed the power button to turn off and turn back on and everything's fine. He started using Vista. I did a full restore before installing the 7 upgrade, but it always does. Any ideas?

  Check in safe mode if the same thing happens.
  To enter the safe mode press F8 when you restart.

  Try to start mode minimum troubleshooting:
  http://support.Microsoft.com/kb/929135

  Make sure that all drivers are up-to-date.

  Repair the installation of Windows 7:
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  All the best!

• ENVY 7640 printer all-in-one: problem software printer after updating to Windows 10

  After updating Windows 10, my HP ENVY 7640 all-in-one printing software does not open.  A dialog box appears asking if I want to install a new program.  How can I get the software of the printer to open?

  Once you upgrade your computer to Windows 10, you upgrade your printer for Windows 10?

  Go here...

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-7600-e-all-in-one-printer-series/6617267/model/6617268

  Download and install the drivers and full software.

• problems with ftp after update of windows 7 and windows xp

  After updates windows 7 and windows xp (updated April 10, 2014) my computers give different errors with FTP, Explorer Windows and FileZilla transfer.
  In windows 7 is resolved by uninstalling the updates. In Xp, no.
  Any idea?

  See the thread below for a possible solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/this-FTP-site-cannot-be-viewed-in-Windows-Explorer/e699d41e-98ae-48c1-9231-d570d46c0f38