Problem of random wireless on Tecra A3

Similar Questions

• Problems re-setup wireless on Tecra 9100

  Just this laptop was a gift about two years ago... didn't have a cd of Tosh with him... friends is no longer had it. Finally came to the point where she needed a reconstruction and thus kill in the xp disc has the downloaded set jolly I thought has all the drivers of the Tosh support site, but even when specifically install the driver wireless for this model, it does not seem to install as the rest of the drivers and I don't seem to be getting anywhere. I know that this laptop supports wireless as it worked to rebuild them.

  The small yellow light for the wireless, but remains yellow and there is a device not recognized in my device manager...

  Help?

  Thanks guys,.

  Miles

  Hello

  Have you tried to install the WLan driver right?

  The Toshiba driver page provides Wlan drivers for Agere, Toshiba and Cisco Wlan cards.
  In my view, this problem is simply to choose wrong driver.

  At the bottom of the unit, you should find the tag that provides information about the integrated wireless network card.

  Take a look at the label and you should find the right card Wlan factory.

• Wireless with Tecra 9000 does not work

  Hi, I have a toshiba tecra 9000, in the last weeks that I had problems with my windows xp, so I decided to install win 2000.

  2000 is more stable, but I had a problem with the wireless card... I installed the latest drivers downloaded from the toshiba Web site... wireless card is installed successfully, but when I run the client Manager there is no way to find my access point...

  I have no signal and cannot find any network... can you help me?
  Thank you

  The laptop is connected to the access point with the installed XP?

  First, please be sure that your card wireless network has been activated on the laptop in the right way.
  The switch on the side of the laptop and the FN + F8 should be used to activate the wireless card.

  Does AP support the same standard as minPCI installed wireless network card wireless. I mean A. B or G standard.
  The router and the card should support the same standard to pair properly

• Buonasera, ho a hp Pavilion g6 laptop e da some giorno ho problemi con scheda wireless.

  Buonasera, ho a hp Pavilion g6 laptop e da some giorno ho problemi con scheda wireless. in apparenza funziona, master in realta' non trova outdo any. con a pc powerful trovo reti meno altro e mi connect senza problemi. Ho reinstallato pilot he nessun risultato my. diagnostica mi dice che e' tutto a posto. It seems aver potenza personally he marked. Come posso risolvere?

  Hello

  Sorry, this forum is in English only.

  Please select the language icon at the bottom of this page English and select your native language from the popup list to view the forums in the language of your choice.

  If you can't find the language of your choice, support for international sites additional options can be found by clicking on the following link:

  http://support.Microsoft.com/common/international.aspx

  Concerning

• Problem with the wireless on the system tray icon.

  Original title: wireless

  not found wirreless icon in the taskbar

  Hi Amourhbone,

  Thanks for posting your question in the Microsoft Community forum.

  It seems that you have a problem with the icon on the system tray wireless.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
  Provide us with a few details in order to better understand the issue.

  1. which version of the operating system are you using?

  2. deal with any problem with the wireless network using Internet?

  3. do you receive any error messages?

  4. did you of recent changes on the computer before this problem?

  I suggest you try the procedure described in the article and see if it helps.

  System icons do not appear in the notification area in Windows Vista or Windows 7, you must restart the computer
  http://support.Microsoft.com/kb/945011

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Hi there I have an acer aspire one and I have a problem with my wireless connection.

  Hi there I have an acer aspire one and I have problems with my wireless connection.it is connected, but I can't use internet.any thoughts? Thank you

  A look at the "front" face, under the lip of the keyboard, similar to where a lock would be on a laptop. There is here a cursor that is not a lock, but it is a switch that activates / deactivates him wireless on and outside. Slide it on until it turns on the light above it (with the logo of the antenna), indicating wireless is turned on and drag it again to turn it off.

• I'm having a problem with my wireless connection. I have to keep in with zero wireless configuration to connect to the internet almost whenever I start the computer. I use downgrade XP on vista.

  I'm having a problem with my wireless connection. I have to keep in with zero wireless configuration to connect to the internet almost whenever I start the computer. Usually, you must configure only once and his game, but I have to keep on my new Dell Precision 6400 reconfigure it. I use downgrade XP on vista.

  Hi Susancav,

  Welcome to Microsoft Windows Forums!

  I'll be your message to the category of xp windows for a better answer. You can always find your message by going to my Threads in the section My Forum links at the top right of the page. http://www.Microsoft.com/windowsxp/expertzone/newsgroups.mspx

  Thank you and best regards,

  Bindu S - MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error message: a problem with your wireless network card

  Hello, I get this message as shown below: any ideas how to solve this problem? A problem with your wireless network card

  Your wireless card has stopped working properly.

  There is a network adapter that allows your computer to connect to a wireless network.

  To find out if a version update of your wireless network card is available, contact the manufacturer of your device or computer.

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• HP ENVY23: PROBLEM WITH A WIRELESS ADAPTER

  Hello

  I BOUGHT THIS REFURBISHED DESKTOP PC. ITS BEEN WORKING REALLY WELL FOR PAST 1 YEAR, BUT SUDDENLY, NOW HE BEGAN TO HAVE PROBLEMS WITH A WIRELESS ADAPTER THAT IS RALINK ADAPTER. PROBLEM IS THAT ADAPTER WILL SUDDENLY STOP WORKING. SO I HAVE TO GO INTO THE DEVICES AND ADAPTER MANAGER DISABLE AND ENABLE FOR HER WORK ONCE AGAIN. SOMETIMES EVEN THAT DOESN'T WORK SO AFTER RESETTING THE ADAPTER, I HAVE TO TURN ON/OFF THE COMPUTER. I HAVE NO CLUE AS WHAT THAT CAUSES THIS PROBLEM. PLEASE IF ANYONE KNOWS HELP.

  Thank you

  AHMED

  P.S I JUST TRIED TO UPDATE MY WIRELESS ADAPTER DRIVER.IT ME SAID I HAVE ALREADY UPDATED DRIVER INSTALLED.

  Hi there @JUMRONI

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  Please report the number of complete product for your computer. Check out the following, if you need assistance with this information. How can I find my model number or product number?

  I suggest to start by checking your system for malware, as follows:

  HP computers - solve and protection against viruses on your computer (Windows 8)
  Spyware, Adware and browser hijacking software

  If that fix it, you're done, otherwise, you should check these:

  Troubleshooting wireless network and Internet (Windows 8)
  In addition, you can watch the the power management of your wireless adapter:
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.

  Forget the network: (Windows 8)
  1. press Windows Key + C
  2. click on settings.
  3. click on change PC settings.
  4. click on network on the left.
  5. click on manage known networks.
  6. click on the name of the network.
  7. click on forget.

  Reset TCP/IP on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.

  It can also help to reset the winsock catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.

  Reinstall the NIC drivers:
  1. download the drivers from here, but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.

  Test an ethernet connection:
  Explicit. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.

  I would like to know if this works for you.

• 4320 proBook s - problems with the wireless Assistant

  Hello

  I have my ProBook s 4320 for about half a year now. For most of the year the half I had problems with the wireless assistant - it seems that when I start my laptop it takes about 5 to 10 minutes before the work of the internet. I never changed any settings in the wireless assistant.

  Nobody does face these same questions and no one knows how the internet starts immediately when I start my laptop? I tried this on different places with different wireless modems, but everywhere, it's the same thing and books of other people can use internet immediately.

  Thanks in advance

  Hello

  You are welcome to help

  The fact that it connects properly in Mode safe indicates that the driver who normally starts with Windows or a program is causing the problem - most likely candidate is to begin by F-Secure.

  Before attempting the following procedure, make sure that you have an installation of F-Secure program, so you can re - install this software, and also a license key necessary to activate it.

  Then, from the windows control panel. Open programs and features, click on the entry for F-Secure once to highlight, and then click the option to uninstall at the top of the window.  Once done, restart the laptop.

  Again, when windows restarts, check the internet connection by using only a known secure site.

  Let me know how this affects the problem.

  Kind regards

  DP - K

• I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse.

  Original title: right click on the mouse itself activating

  I borrowed a USB to a person at work and I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse. The left click of two devices works normally, however, sometimes she does not respond to clicks and it takes a few seconds to work. The left button was constantly starts to turn on, as if he was stuck. After that I hit Alt + Tab and modify windows it stops for a few moments and starts at a later date. I havo not found a specific condition or a combination of keys that may trigger the fault.

  I read a few posts on discussion forums, but all say that it could be a hardware problem, which I think is not, because both devices have the same problem and I'm sure it all started with the insertion of the borrowed memory stick. I scanned the readers to help Symantec's EndPoint Protection and installed Microsoft Security Essentials and performed a full scan, but found nothing. I even restored the system, but the problem remains.

  Should I get a different antivirus? How can I find the cause so I can find a better targeted solution?

  Try to install the drivers from this link and check.

  http://support.Lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=MIGR-77167

• Problems with N5050 wireless

  Hi I've had problems with a wireless N5050 for six months now. He was inconsistent and little by little do worse even if the signal always displays also available. I have a N5030 who has never had any problem to connect to the same wireless network. I tried to reinstall the drivers. I tried to change the configuration wireless between WEP / WPA etc... I've updated the BIOS. This seemed to have worked briefly, but after about 3 or four connections immediate restarts more than 2/3, he returned to be flaky. Usually when I try to connect it fails and I need to connect a cable directly from the router for access. If I leave it on it will usually manage to connect to some point in the next hour or two. The windows messages/troubleshooting help make no difference and seem to contain no useful leads. Another curiosity is that usually when he can't connect only lists my wireless network and one or two others, but when he is able to connect it lists more neighbors etc... I also tried some changes configuration after completing the other threads, but without improvement. Firewall and AV is McAfee, but it's no good to an immediate connection is restarted in Mode safe mode with networking that seems that reading absolves McAfee to be the problem? The laptop out of the warranty period, is it likely to be a problem with the wireless card or is there other configuration changes, I can try? Thanks Ben

  Ben,

  You have changed security WPA, correct?

  You wireless router Belkin router?

  I had you get your product key of McAfee using Belarc Advisor

  Then remove McAfee using the McAfee removal tool , and then restart your computer and try to connect.

  Rick

• I have a problem with the wireless network card.

  Hello

  I use a laptop Medion MIM 2210 and I have a problem with my wireless network adapter.

  I get a message before Windows 7 starts telling me that there is problem with a wireless driver. The exact message says:

  "Intel UNDI, PXE - Z.0 (build 082)

  Copyright (C) 1997,1998,1999 Intel Corporation

  VIA Rhine II Fast Ethernet Adapter v2.43 (2005/12/15)

  PXE - E61: Media test failure, check cable of

  "PXE - MOF: exit Inel PXE ROM.

  This message appears every time you start and I don't know what he means by "Media Test Failure".

  I turned on my laptop today and noticed I had no internet connection, it showed that it connected but with yellow '!' symbol indicating that it was not fully connected. He did this for a while now and I have reinstalled Windows, in safe mode and I tried to delete the drivers and re - install, but it hangs right on uninstall what makes me angry no the case.

  Of course now, I tried to look for help my internet connection is running but the message is still there. Can someone tell me what to do or how to solve this problem, I am standing now on what to do. I was also on the drivers Medion website but it is impossible to navigate around and drivers without end there'e to choose. I would consider ringing them and asking them if they were not located in Germany as it would cost me a bomb! I did just now searching online via the Device Manager to see if he can find an update for the drivers but nothing came.

  Thanks for any help that anyone can offer :)

  The message is to be cause the BIOS looking for boot from LAN (not wireless) before it starts and then from the hard drive. The Media test failure is because to boot from LAN it tests to see if the wired Ethernet is connected, it is not if it generates the error message.

  Enter the BIOS press F2 after initial power on but before the Logo Windows shows

  Integrated devices should allow you to set the settings of wired network adapter. According to the BIOS it is either "enabled with PXE" or have another option to enable or disable the boot ROM

  In the boot options the LAN card should be removed altogether.

  This message is ONLY applicable to the transfer of the BIOS boot process and should have no impact on the problems of WiFi (it is not on WiFi)

• IM problems with my wireless connection, it says my DNS server does not respond, what is this, can help to somone, thanks

  IM problems with my wireless connection, it says my DNS server does not respond, what is this, can help to somone, thanks

  Hello

   

  Thanks for posting the question in the Microsoft Community!

  You can't use the wireless connection and the message that the DNS server is not responding.

  The problem may occur if the computer is unable to connect to the DNS server.

  To check, I suggest you follow the steps:

  Method 1: Re-register the DNS

   

  a. Click Start. Type cmd in the search box and press ENTER.

  b. at the command prompt, type the following command and press ENTER:
  ipconfig/flushdns (there is a space between ipconfig and /)

  It will display the message properly emptied the cache of DNS resolution.

  c. at the command prompt, type the following command and press ENTER:
  ipconfig/registerdns (there is a space between ipconfig and /)

  d. at the command prompt, type the following command and press ENTER:

  ipconfig/all (there is a space between ipconfig and /)
  The command ipconfig/all command displays for all your network adapters, TCP/IP in Windows settings.

  If your IP address of your Local network connection is 0.0.0.0 or 169.x.x.x (where x is a number any), then your computer does not receive an IP address from router.
  If this is the case, try this:

  i. enough at the command prompt ipconfig and press ENTER

  II. ipconfig / renew in command prompt and press ENTER

  The test again by typing ipconfig/all to see what is the address? (If you are on a router, it should start by or 192.168.0.x or 192.168.1.x 10.x.x.x)

  Method 2:

  a. click Start and then click Control Panel.

  b. go to the networking and sharing Center and then click on change adapter settings.

  c. right-click on connection to the Local network and select Properties.

  d. Select Internet Protocol Version 6, and then click Properties.

  e. choose the DNS server to obtain an address automatically , then press Ok.

  f. Select obtain IP address automatically.

  g. Repeat steps for Internet Protocol version 4 as well.

  http://social.answers.Microsoft.com/forums/en-us/w7network/thread/2e81fca4-35bb-4af9-86a1-7326d2fe91b3

   

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

   

• I have problems with random blue screens - 1st BC Code - of the suggestions?

  I have problems with random blue screens - 1st BC code - all others are zeros.  6_1_7601 OS version, produced 768_1.  Any suggestions?  My computer is a model of HP P7-1235.

  Thank you.

  The minidump files showed two errors blue screen, an error KMODE_EXCEPTION_NOT_HANDLED (1e) referring to the amdxhc.sys and an error SYSTEM_SERVICE_EXCEPTION (3B) referring to the usbfilter.sys:

  Bugcheck 1E, {0, 0, 0, 0}

  WARNING: Unable to verify timestamp for amdxhc.sys
  ERROR: Module load completed but symbols can be loaded for amdxhc.sys

  Bugcheck 3B {c0000005, fffff8000f4770c5, fffff880085feb10, 0}

  WARNING: Unable to verify timestamp for usbfilter.sys
  ERROR: Module load completed but symbols can be loaded for usbfilter.sys

  The amdxhc.sys is the AMD USB 3.0 driver and the usbfilter.sys is the AMD USB filter driver.

  The amdxhc.sys is dated January 3, 2012 and the usbfilter.sys is dated November 16, 2011.

  Two of these drivers should be updated to the latest version to ensure compatibility with the motherboard and between them.

  HP has an available Update for AMD USB 3.0 driver but I do not see an AMD USB filter driver available for your computer updated.

  I might suggest to try to get the package of motherboard chipset from AMD for versions newer and compatible to the two pilots.

  You can try the "AMD Chipset drivers' starting from the following link which should update the two drivers.

  http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx#2

  I recommend to create a System Restore Point before installing the new motherboard drivers.